#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
#[doc = "Register block"]
pub struct RegisterBlock {
conf0: CONF0,
int_raw: INT_RAW,
int_st: INT_ST,
int_ena: INT_ENA,
int_clr: INT_CLR,
dma_out_status: DMA_OUT_STATUS,
dma_out_push: DMA_OUT_PUSH,
dma_in_status: DMA_IN_STATUS,
dma_in_pop: DMA_IN_POP,
dma_out_link: DMA_OUT_LINK,
dma_in_link: DMA_IN_LINK,
conf1: CONF1,
state0: STATE0,
state1: STATE1,
dma_out_eof_des_addr: DMA_OUT_EOF_DES_ADDR,
dma_in_suc_eof_des_addr: DMA_IN_SUC_EOF_DES_ADDR,
dma_in_err_eof_des_addr: DMA_IN_ERR_EOF_DES_ADDR,
dma_out_eof_bfr_des_addr: DMA_OUT_EOF_BFR_DES_ADDR,
ahb_test: AHB_TEST,
dma_in_dscr: DMA_IN_DSCR,
dma_in_dscr_bf0: DMA_IN_DSCR_BF0,
dma_in_dscr_bf1: DMA_IN_DSCR_BF1,
dma_out_dscr: DMA_OUT_DSCR,
dma_out_dscr_bf0: DMA_OUT_DSCR_BF0,
dma_out_dscr_bf1: DMA_OUT_DSCR_BF1,
escape_conf: ESCAPE_CONF,
hung_conf: HUNG_CONF,
ack_num: ACK_NUM,
rx_head: RX_HEAD,
quick_sent: QUICK_SENT,
q: [Q; 7],
esc_conf: [ESC_CONF; 4],
pkt_thres: PKT_THRES,
_reserved33: [u8; 0x38],
date: DATE,
}
impl RegisterBlock {
#[doc = "0x00 - "]
#[inline(always)]
pub const fn conf0(&self) -> &CONF0 {
&self.conf0
}
#[doc = "0x04 - "]
#[inline(always)]
pub const fn int_raw(&self) -> &INT_RAW {
&self.int_raw
}
#[doc = "0x08 - "]
#[inline(always)]
pub const fn int_st(&self) -> &INT_ST {
&self.int_st
}
#[doc = "0x0c - "]
#[inline(always)]
pub const fn int_ena(&self) -> &INT_ENA {
&self.int_ena
}
#[doc = "0x10 - "]
#[inline(always)]
pub const fn int_clr(&self) -> &INT_CLR {
&self.int_clr
}
#[doc = "0x14 - "]
#[inline(always)]
pub const fn dma_out_status(&self) -> &DMA_OUT_STATUS {
&self.dma_out_status
}
#[doc = "0x18 - "]
#[inline(always)]
pub const fn dma_out_push(&self) -> &DMA_OUT_PUSH {
&self.dma_out_push
}
#[doc = "0x1c - "]
#[inline(always)]
pub const fn dma_in_status(&self) -> &DMA_IN_STATUS {
&self.dma_in_status
}
#[doc = "0x20 - "]
#[inline(always)]
pub const fn dma_in_pop(&self) -> &DMA_IN_POP {
&self.dma_in_pop
}
#[doc = "0x24 - "]
#[inline(always)]
pub const fn dma_out_link(&self) -> &DMA_OUT_LINK {
&self.dma_out_link
}
#[doc = "0x28 - "]
#[inline(always)]
pub const fn dma_in_link(&self) -> &DMA_IN_LINK {
&self.dma_in_link
}
#[doc = "0x2c - "]
#[inline(always)]
pub const fn conf1(&self) -> &CONF1 {
&self.conf1
}
#[doc = "0x30 - "]
#[inline(always)]
pub const fn state0(&self) -> &STATE0 {
&self.state0
}
#[doc = "0x34 - "]
#[inline(always)]
pub const fn state1(&self) -> &STATE1 {
&self.state1
}
#[doc = "0x38 - "]
#[inline(always)]
pub const fn dma_out_eof_des_addr(&self) -> &DMA_OUT_EOF_DES_ADDR {
&self.dma_out_eof_des_addr
}
#[doc = "0x3c - "]
#[inline(always)]
pub const fn dma_in_suc_eof_des_addr(&self) -> &DMA_IN_SUC_EOF_DES_ADDR {
&self.dma_in_suc_eof_des_addr
}
#[doc = "0x40 - "]
#[inline(always)]
pub const fn dma_in_err_eof_des_addr(&self) -> &DMA_IN_ERR_EOF_DES_ADDR {
&self.dma_in_err_eof_des_addr
}
#[doc = "0x44 - "]
#[inline(always)]
pub const fn dma_out_eof_bfr_des_addr(&self) -> &DMA_OUT_EOF_BFR_DES_ADDR {
&self.dma_out_eof_bfr_des_addr
}
#[doc = "0x48 - "]
#[inline(always)]
pub const fn ahb_test(&self) -> &AHB_TEST {
&self.ahb_test
}
#[doc = "0x4c - "]
#[inline(always)]
pub const fn dma_in_dscr(&self) -> &DMA_IN_DSCR {
&self.dma_in_dscr
}
#[doc = "0x50 - "]
#[inline(always)]
pub const fn dma_in_dscr_bf0(&self) -> &DMA_IN_DSCR_BF0 {
&self.dma_in_dscr_bf0
}
#[doc = "0x54 - "]
#[inline(always)]
pub const fn dma_in_dscr_bf1(&self) -> &DMA_IN_DSCR_BF1 {
&self.dma_in_dscr_bf1
}
#[doc = "0x58 - "]
#[inline(always)]
pub const fn dma_out_dscr(&self) -> &DMA_OUT_DSCR {
&self.dma_out_dscr
}
#[doc = "0x5c - "]
#[inline(always)]
pub const fn dma_out_dscr_bf0(&self) -> &DMA_OUT_DSCR_BF0 {
&self.dma_out_dscr_bf0
}
#[doc = "0x60 - "]
#[inline(always)]
pub const fn dma_out_dscr_bf1(&self) -> &DMA_OUT_DSCR_BF1 {
&self.dma_out_dscr_bf1
}
#[doc = "0x64 - "]
#[inline(always)]
pub const fn escape_conf(&self) -> &ESCAPE_CONF {
&self.escape_conf
}
#[doc = "0x68 - "]
#[inline(always)]
pub const fn hung_conf(&self) -> &HUNG_CONF {
&self.hung_conf
}
#[doc = "0x6c - "]
#[inline(always)]
pub const fn ack_num(&self) -> &ACK_NUM {
&self.ack_num
}
#[doc = "0x70 - "]
#[inline(always)]
pub const fn rx_head(&self) -> &RX_HEAD {
&self.rx_head
}
#[doc = "0x74 - "]
#[inline(always)]
pub const fn quick_sent(&self) -> &QUICK_SENT {
&self.quick_sent
}
#[doc = "0x78..0xb0 - Cluster Q%s, containing Q?_WORD0, Q?_WORD1"]
#[inline(always)]
pub const fn q(&self, n: usize) -> &Q {
&self.q[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x78..0xb0 - Cluster Q%s, containing Q?_WORD0, Q?_WORD1"]
#[inline(always)]
pub fn q_iter(&self) -> impl Iterator<Item = &Q> {
self.q.iter()
}
#[doc = "0xb0..0xc0 - "]
#[inline(always)]
pub const fn esc_conf(&self, n: usize) -> &ESC_CONF {
&self.esc_conf[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0xb0..0xc0 - "]
#[inline(always)]
pub fn esc_conf_iter(&self) -> impl Iterator<Item = &ESC_CONF> {
self.esc_conf.iter()
}
#[doc = "0xc0 - "]
#[inline(always)]
pub const fn pkt_thres(&self) -> &PKT_THRES {
&self.pkt_thres
}
#[doc = "0xfc - "]
#[inline(always)]
pub const fn date(&self) -> &DATE {
&self.date
}
}
#[doc = "CONF0 (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`conf0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`conf0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@conf0`] module"]
pub type CONF0 = crate::Reg<conf0::CONF0_SPEC>;
#[doc = ""]
pub mod conf0;
#[doc = "INT_RAW (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`int_raw::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_raw`] module"]
pub type INT_RAW = crate::Reg<int_raw::INT_RAW_SPEC>;
#[doc = ""]
pub mod int_raw;
#[doc = "INT_ST (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`int_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_st`] module"]
pub type INT_ST = crate::Reg<int_st::INT_ST_SPEC>;
#[doc = ""]
pub mod int_st;
#[doc = "INT_ENA (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`int_ena::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_ena::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_ena`] module"]
pub type INT_ENA = crate::Reg<int_ena::INT_ENA_SPEC>;
#[doc = ""]
pub mod int_ena;
#[doc = "INT_CLR (w) register accessor: \n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_clr`] module"]
pub type INT_CLR = crate::Reg<int_clr::INT_CLR_SPEC>;
#[doc = ""]
pub mod int_clr;
#[doc = "DMA_OUT_STATUS (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dma_out_status::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dma_out_status`] module"]
pub type DMA_OUT_STATUS = crate::Reg<dma_out_status::DMA_OUT_STATUS_SPEC>;
#[doc = ""]
pub mod dma_out_status;
#[doc = "DMA_OUT_PUSH (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dma_out_push::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`dma_out_push::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dma_out_push`] module"]
pub type DMA_OUT_PUSH = crate::Reg<dma_out_push::DMA_OUT_PUSH_SPEC>;
#[doc = ""]
pub mod dma_out_push;
#[doc = "DMA_IN_STATUS (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dma_in_status::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dma_in_status`] module"]
pub type DMA_IN_STATUS = crate::Reg<dma_in_status::DMA_IN_STATUS_SPEC>;
#[doc = ""]
pub mod dma_in_status;
#[doc = "DMA_IN_POP (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dma_in_pop::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`dma_in_pop::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dma_in_pop`] module"]
pub type DMA_IN_POP = crate::Reg<dma_in_pop::DMA_IN_POP_SPEC>;
#[doc = ""]
pub mod dma_in_pop;
#[doc = "DMA_OUT_LINK (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dma_out_link::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`dma_out_link::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dma_out_link`] module"]
pub type DMA_OUT_LINK = crate::Reg<dma_out_link::DMA_OUT_LINK_SPEC>;
#[doc = ""]
pub mod dma_out_link;
#[doc = "DMA_IN_LINK (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dma_in_link::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`dma_in_link::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dma_in_link`] module"]
pub type DMA_IN_LINK = crate::Reg<dma_in_link::DMA_IN_LINK_SPEC>;
#[doc = ""]
pub mod dma_in_link;
#[doc = "CONF1 (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`conf1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`conf1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@conf1`] module"]
pub type CONF1 = crate::Reg<conf1::CONF1_SPEC>;
#[doc = ""]
pub mod conf1;
#[doc = "STATE0 (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`state0::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@state0`] module"]
pub type STATE0 = crate::Reg<state0::STATE0_SPEC>;
#[doc = ""]
pub mod state0;
#[doc = "STATE1 (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`state1::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@state1`] module"]
pub type STATE1 = crate::Reg<state1::STATE1_SPEC>;
#[doc = ""]
pub mod state1;
#[doc = "DMA_OUT_EOF_DES_ADDR (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dma_out_eof_des_addr::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dma_out_eof_des_addr`] module"]
pub type DMA_OUT_EOF_DES_ADDR = crate::Reg<dma_out_eof_des_addr::DMA_OUT_EOF_DES_ADDR_SPEC>;
#[doc = ""]
pub mod dma_out_eof_des_addr;
#[doc = "DMA_IN_SUC_EOF_DES_ADDR (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dma_in_suc_eof_des_addr::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dma_in_suc_eof_des_addr`] module"]
pub type DMA_IN_SUC_EOF_DES_ADDR =
crate::Reg<dma_in_suc_eof_des_addr::DMA_IN_SUC_EOF_DES_ADDR_SPEC>;
#[doc = ""]
pub mod dma_in_suc_eof_des_addr;
#[doc = "DMA_IN_ERR_EOF_DES_ADDR (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dma_in_err_eof_des_addr::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dma_in_err_eof_des_addr`] module"]
pub type DMA_IN_ERR_EOF_DES_ADDR =
crate::Reg<dma_in_err_eof_des_addr::DMA_IN_ERR_EOF_DES_ADDR_SPEC>;
#[doc = ""]
pub mod dma_in_err_eof_des_addr;
#[doc = "DMA_OUT_EOF_BFR_DES_ADDR (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dma_out_eof_bfr_des_addr::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dma_out_eof_bfr_des_addr`] module"]
pub type DMA_OUT_EOF_BFR_DES_ADDR =
crate::Reg<dma_out_eof_bfr_des_addr::DMA_OUT_EOF_BFR_DES_ADDR_SPEC>;
#[doc = ""]
pub mod dma_out_eof_bfr_des_addr;
#[doc = "AHB_TEST (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`ahb_test::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ahb_test::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ahb_test`] module"]
pub type AHB_TEST = crate::Reg<ahb_test::AHB_TEST_SPEC>;
#[doc = ""]
pub mod ahb_test;
#[doc = "DMA_IN_DSCR (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dma_in_dscr::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dma_in_dscr`] module"]
pub type DMA_IN_DSCR = crate::Reg<dma_in_dscr::DMA_IN_DSCR_SPEC>;
#[doc = ""]
pub mod dma_in_dscr;
#[doc = "DMA_IN_DSCR_BF0 (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dma_in_dscr_bf0::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dma_in_dscr_bf0`] module"]
pub type DMA_IN_DSCR_BF0 = crate::Reg<dma_in_dscr_bf0::DMA_IN_DSCR_BF0_SPEC>;
#[doc = ""]
pub mod dma_in_dscr_bf0;
#[doc = "DMA_IN_DSCR_BF1 (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dma_in_dscr_bf1::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dma_in_dscr_bf1`] module"]
pub type DMA_IN_DSCR_BF1 = crate::Reg<dma_in_dscr_bf1::DMA_IN_DSCR_BF1_SPEC>;
#[doc = ""]
pub mod dma_in_dscr_bf1;
#[doc = "DMA_OUT_DSCR (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dma_out_dscr::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dma_out_dscr`] module"]
pub type DMA_OUT_DSCR = crate::Reg<dma_out_dscr::DMA_OUT_DSCR_SPEC>;
#[doc = ""]
pub mod dma_out_dscr;
#[doc = "DMA_OUT_DSCR_BF0 (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dma_out_dscr_bf0::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dma_out_dscr_bf0`] module"]
pub type DMA_OUT_DSCR_BF0 = crate::Reg<dma_out_dscr_bf0::DMA_OUT_DSCR_BF0_SPEC>;
#[doc = ""]
pub mod dma_out_dscr_bf0;
#[doc = "DMA_OUT_DSCR_BF1 (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dma_out_dscr_bf1::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dma_out_dscr_bf1`] module"]
pub type DMA_OUT_DSCR_BF1 = crate::Reg<dma_out_dscr_bf1::DMA_OUT_DSCR_BF1_SPEC>;
#[doc = ""]
pub mod dma_out_dscr_bf1;
#[doc = "ESCAPE_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`escape_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`escape_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@escape_conf`] module"]
pub type ESCAPE_CONF = crate::Reg<escape_conf::ESCAPE_CONF_SPEC>;
#[doc = ""]
pub mod escape_conf;
#[doc = "HUNG_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`hung_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`hung_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@hung_conf`] module"]
pub type HUNG_CONF = crate::Reg<hung_conf::HUNG_CONF_SPEC>;
#[doc = ""]
pub mod hung_conf;
#[doc = "ACK_NUM (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`ack_num::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ack_num::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ack_num`] module"]
pub type ACK_NUM = crate::Reg<ack_num::ACK_NUM_SPEC>;
#[doc = ""]
pub mod ack_num;
#[doc = "RX_HEAD (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`rx_head::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rx_head`] module"]
pub type RX_HEAD = crate::Reg<rx_head::RX_HEAD_SPEC>;
#[doc = ""]
pub mod rx_head;
#[doc = "QUICK_SENT (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`quick_sent::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`quick_sent::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@quick_sent`] module"]
pub type QUICK_SENT = crate::Reg<quick_sent::QUICK_SENT_SPEC>;
#[doc = ""]
pub mod quick_sent;
#[doc = "Cluster Q%s, containing Q?_WORD0, Q?_WORD1"]
pub use self::q::Q;
#[doc = r"Cluster"]
#[doc = "Cluster Q%s, containing Q?_WORD0, Q?_WORD1"]
pub mod q;
#[doc = "ESC_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`esc_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`esc_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@esc_conf`] module"]
pub type ESC_CONF = crate::Reg<esc_conf::ESC_CONF_SPEC>;
#[doc = ""]
pub mod esc_conf;
#[doc = "PKT_THRES (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`pkt_thres::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`pkt_thres::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pkt_thres`] module"]
pub type PKT_THRES = crate::Reg<pkt_thres::PKT_THRES_SPEC>;
#[doc = ""]
pub mod pkt_thres;
pub use crate::apb_ctrl::{date, DATE};