#[doc = "Register `CTRL` reader"]
pub type R = crate::R<CTRL_SPEC>;
#[doc = "Register `CTRL` writer"]
pub type W = crate::W<CTRL_SPEC>;
#[doc = "Field `CNT_RST_U(0-7)` reader - Set this bit to clear unit%s's counter."]
pub type CNT_RST_U_R = crate::BitReader;
#[doc = "Field `CNT_RST_U(0-7)` writer - Set this bit to clear unit%s's counter."]
pub type CNT_RST_U_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `CNT_PAUSE_U(0-7)` reader - Set this bit to pause unit%s's counter."]
pub type CNT_PAUSE_U_R = crate::BitReader;
#[doc = "Field `CNT_PAUSE_U(0-7)` writer - Set this bit to pause unit%s's counter."]
pub type CNT_PAUSE_U_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `CLK_EN` reader - "]
pub type CLK_EN_R = crate::BitReader;
#[doc = "Field `CLK_EN` writer - "]
pub type CLK_EN_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
#[doc = "Set this bit to clear unit(0-7)'s counter."]
#[doc = ""]
#[doc = "<div class=\"warning\">`n` is number of field in register. `n == 0` corresponds to `CNT_RST_U0` field.</div>"]
#[inline(always)]
pub fn cnt_rst_u(&self, n: u8) -> CNT_RST_U_R {
#[allow(clippy::no_effect)]
[(); 8][n as usize];
CNT_RST_U_R::new(((self.bits >> (n * 2)) & 1) != 0)
}
#[doc = "Iterator for array of:"]
#[doc = "Set this bit to clear unit(0-7)'s counter."]
#[inline(always)]
pub fn cnt_rst_u_iter(&self) -> impl Iterator<Item = CNT_RST_U_R> + '_ {
(0..8).map(move |n| CNT_RST_U_R::new(((self.bits >> (n * 2)) & 1) != 0))
}
#[doc = "Bit 0 - Set this bit to clear unit0's counter."]
#[inline(always)]
pub fn cnt_rst_u0(&self) -> CNT_RST_U_R {
CNT_RST_U_R::new((self.bits & 1) != 0)
}
#[doc = "Bit 2 - Set this bit to clear unit1's counter."]
#[inline(always)]
pub fn cnt_rst_u1(&self) -> CNT_RST_U_R {
CNT_RST_U_R::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bit 4 - Set this bit to clear unit2's counter."]
#[inline(always)]
pub fn cnt_rst_u2(&self) -> CNT_RST_U_R {
CNT_RST_U_R::new(((self.bits >> 4) & 1) != 0)
}
#[doc = "Bit 6 - Set this bit to clear unit3's counter."]
#[inline(always)]
pub fn cnt_rst_u3(&self) -> CNT_RST_U_R {
CNT_RST_U_R::new(((self.bits >> 6) & 1) != 0)
}
#[doc = "Bit 8 - Set this bit to clear unit4's counter."]
#[inline(always)]
pub fn cnt_rst_u4(&self) -> CNT_RST_U_R {
CNT_RST_U_R::new(((self.bits >> 8) & 1) != 0)
}
#[doc = "Bit 10 - Set this bit to clear unit5's counter."]
#[inline(always)]
pub fn cnt_rst_u5(&self) -> CNT_RST_U_R {
CNT_RST_U_R::new(((self.bits >> 10) & 1) != 0)
}
#[doc = "Bit 12 - Set this bit to clear unit6's counter."]
#[inline(always)]
pub fn cnt_rst_u6(&self) -> CNT_RST_U_R {
CNT_RST_U_R::new(((self.bits >> 12) & 1) != 0)
}
#[doc = "Bit 14 - Set this bit to clear unit7's counter."]
#[inline(always)]
pub fn cnt_rst_u7(&self) -> CNT_RST_U_R {
CNT_RST_U_R::new(((self.bits >> 14) & 1) != 0)
}
#[doc = "Set this bit to pause unit(0-7)'s counter."]
#[doc = ""]
#[doc = "<div class=\"warning\">`n` is number of field in register. `n == 0` corresponds to `CNT_PAUSE_U0` field.</div>"]
#[inline(always)]
pub fn cnt_pause_u(&self, n: u8) -> CNT_PAUSE_U_R {
#[allow(clippy::no_effect)]
[(); 8][n as usize];
CNT_PAUSE_U_R::new(((self.bits >> (n * 2 + 1)) & 1) != 0)
}
#[doc = "Iterator for array of:"]
#[doc = "Set this bit to pause unit(0-7)'s counter."]
#[inline(always)]
pub fn cnt_pause_u_iter(&self) -> impl Iterator<Item = CNT_PAUSE_U_R> + '_ {
(0..8).map(move |n| CNT_PAUSE_U_R::new(((self.bits >> (n * 2 + 1)) & 1) != 0))
}
#[doc = "Bit 1 - Set this bit to pause unit0's counter."]
#[inline(always)]
pub fn cnt_pause_u0(&self) -> CNT_PAUSE_U_R {
CNT_PAUSE_U_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 3 - Set this bit to pause unit1's counter."]
#[inline(always)]
pub fn cnt_pause_u1(&self) -> CNT_PAUSE_U_R {
CNT_PAUSE_U_R::new(((self.bits >> 3) & 1) != 0)
}
#[doc = "Bit 5 - Set this bit to pause unit2's counter."]
#[inline(always)]
pub fn cnt_pause_u2(&self) -> CNT_PAUSE_U_R {
CNT_PAUSE_U_R::new(((self.bits >> 5) & 1) != 0)
}
#[doc = "Bit 7 - Set this bit to pause unit3's counter."]
#[inline(always)]
pub fn cnt_pause_u3(&self) -> CNT_PAUSE_U_R {
CNT_PAUSE_U_R::new(((self.bits >> 7) & 1) != 0)
}
#[doc = "Bit 9 - Set this bit to pause unit4's counter."]
#[inline(always)]
pub fn cnt_pause_u4(&self) -> CNT_PAUSE_U_R {
CNT_PAUSE_U_R::new(((self.bits >> 9) & 1) != 0)
}
#[doc = "Bit 11 - Set this bit to pause unit5's counter."]
#[inline(always)]
pub fn cnt_pause_u5(&self) -> CNT_PAUSE_U_R {
CNT_PAUSE_U_R::new(((self.bits >> 11) & 1) != 0)
}
#[doc = "Bit 13 - Set this bit to pause unit6's counter."]
#[inline(always)]
pub fn cnt_pause_u6(&self) -> CNT_PAUSE_U_R {
CNT_PAUSE_U_R::new(((self.bits >> 13) & 1) != 0)
}
#[doc = "Bit 15 - Set this bit to pause unit7's counter."]
#[inline(always)]
pub fn cnt_pause_u7(&self) -> CNT_PAUSE_U_R {
CNT_PAUSE_U_R::new(((self.bits >> 15) & 1) != 0)
}
#[doc = "Bit 16"]
#[inline(always)]
pub fn clk_en(&self) -> CLK_EN_R {
CLK_EN_R::new(((self.bits >> 16) & 1) != 0)
}
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
f.debug_struct("CTRL")
.field("cnt_rst_u0", &self.cnt_rst_u0())
.field("cnt_rst_u1", &self.cnt_rst_u1())
.field("cnt_rst_u2", &self.cnt_rst_u2())
.field("cnt_rst_u3", &self.cnt_rst_u3())
.field("cnt_rst_u4", &self.cnt_rst_u4())
.field("cnt_rst_u5", &self.cnt_rst_u5())
.field("cnt_rst_u6", &self.cnt_rst_u6())
.field("cnt_rst_u7", &self.cnt_rst_u7())
.field("cnt_pause_u0", &self.cnt_pause_u0())
.field("cnt_pause_u1", &self.cnt_pause_u1())
.field("cnt_pause_u2", &self.cnt_pause_u2())
.field("cnt_pause_u3", &self.cnt_pause_u3())
.field("cnt_pause_u4", &self.cnt_pause_u4())
.field("cnt_pause_u5", &self.cnt_pause_u5())
.field("cnt_pause_u6", &self.cnt_pause_u6())
.field("cnt_pause_u7", &self.cnt_pause_u7())
.field("clk_en", &self.clk_en())
.finish()
}
}
impl W {
#[doc = "Set this bit to clear unit(0-7)'s counter."]
#[doc = ""]
#[doc = "<div class=\"warning\">`n` is number of field in register. `n == 0` corresponds to `CNT_RST_U0` field.</div>"]
#[inline(always)]
pub fn cnt_rst_u(&mut self, n: u8) -> CNT_RST_U_W<'_, CTRL_SPEC> {
#[allow(clippy::no_effect)]
[(); 8][n as usize];
CNT_RST_U_W::new(self, n * 2)
}
#[doc = "Bit 0 - Set this bit to clear unit0's counter."]
#[inline(always)]
pub fn cnt_rst_u0(&mut self) -> CNT_RST_U_W<'_, CTRL_SPEC> {
CNT_RST_U_W::new(self, 0)
}
#[doc = "Bit 2 - Set this bit to clear unit1's counter."]
#[inline(always)]
pub fn cnt_rst_u1(&mut self) -> CNT_RST_U_W<'_, CTRL_SPEC> {
CNT_RST_U_W::new(self, 2)
}
#[doc = "Bit 4 - Set this bit to clear unit2's counter."]
#[inline(always)]
pub fn cnt_rst_u2(&mut self) -> CNT_RST_U_W<'_, CTRL_SPEC> {
CNT_RST_U_W::new(self, 4)
}
#[doc = "Bit 6 - Set this bit to clear unit3's counter."]
#[inline(always)]
pub fn cnt_rst_u3(&mut self) -> CNT_RST_U_W<'_, CTRL_SPEC> {
CNT_RST_U_W::new(self, 6)
}
#[doc = "Bit 8 - Set this bit to clear unit4's counter."]
#[inline(always)]
pub fn cnt_rst_u4(&mut self) -> CNT_RST_U_W<'_, CTRL_SPEC> {
CNT_RST_U_W::new(self, 8)
}
#[doc = "Bit 10 - Set this bit to clear unit5's counter."]
#[inline(always)]
pub fn cnt_rst_u5(&mut self) -> CNT_RST_U_W<'_, CTRL_SPEC> {
CNT_RST_U_W::new(self, 10)
}
#[doc = "Bit 12 - Set this bit to clear unit6's counter."]
#[inline(always)]
pub fn cnt_rst_u6(&mut self) -> CNT_RST_U_W<'_, CTRL_SPEC> {
CNT_RST_U_W::new(self, 12)
}
#[doc = "Bit 14 - Set this bit to clear unit7's counter."]
#[inline(always)]
pub fn cnt_rst_u7(&mut self) -> CNT_RST_U_W<'_, CTRL_SPEC> {
CNT_RST_U_W::new(self, 14)
}
#[doc = "Set this bit to pause unit(0-7)'s counter."]
#[doc = ""]
#[doc = "<div class=\"warning\">`n` is number of field in register. `n == 0` corresponds to `CNT_PAUSE_U0` field.</div>"]
#[inline(always)]
pub fn cnt_pause_u(&mut self, n: u8) -> CNT_PAUSE_U_W<'_, CTRL_SPEC> {
#[allow(clippy::no_effect)]
[(); 8][n as usize];
CNT_PAUSE_U_W::new(self, n * 2 + 1)
}
#[doc = "Bit 1 - Set this bit to pause unit0's counter."]
#[inline(always)]
pub fn cnt_pause_u0(&mut self) -> CNT_PAUSE_U_W<'_, CTRL_SPEC> {
CNT_PAUSE_U_W::new(self, 1)
}
#[doc = "Bit 3 - Set this bit to pause unit1's counter."]
#[inline(always)]
pub fn cnt_pause_u1(&mut self) -> CNT_PAUSE_U_W<'_, CTRL_SPEC> {
CNT_PAUSE_U_W::new(self, 3)
}
#[doc = "Bit 5 - Set this bit to pause unit2's counter."]
#[inline(always)]
pub fn cnt_pause_u2(&mut self) -> CNT_PAUSE_U_W<'_, CTRL_SPEC> {
CNT_PAUSE_U_W::new(self, 5)
}
#[doc = "Bit 7 - Set this bit to pause unit3's counter."]
#[inline(always)]
pub fn cnt_pause_u3(&mut self) -> CNT_PAUSE_U_W<'_, CTRL_SPEC> {
CNT_PAUSE_U_W::new(self, 7)
}
#[doc = "Bit 9 - Set this bit to pause unit4's counter."]
#[inline(always)]
pub fn cnt_pause_u4(&mut self) -> CNT_PAUSE_U_W<'_, CTRL_SPEC> {
CNT_PAUSE_U_W::new(self, 9)
}
#[doc = "Bit 11 - Set this bit to pause unit5's counter."]
#[inline(always)]
pub fn cnt_pause_u5(&mut self) -> CNT_PAUSE_U_W<'_, CTRL_SPEC> {
CNT_PAUSE_U_W::new(self, 11)
}
#[doc = "Bit 13 - Set this bit to pause unit6's counter."]
#[inline(always)]
pub fn cnt_pause_u6(&mut self) -> CNT_PAUSE_U_W<'_, CTRL_SPEC> {
CNT_PAUSE_U_W::new(self, 13)
}
#[doc = "Bit 15 - Set this bit to pause unit7's counter."]
#[inline(always)]
pub fn cnt_pause_u7(&mut self) -> CNT_PAUSE_U_W<'_, CTRL_SPEC> {
CNT_PAUSE_U_W::new(self, 15)
}
#[doc = "Bit 16"]
#[inline(always)]
pub fn clk_en(&mut self) -> CLK_EN_W<'_, CTRL_SPEC> {
CLK_EN_W::new(self, 16)
}
}
#[doc = "\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrl::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrl::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct CTRL_SPEC;
impl crate::RegisterSpec for CTRL_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [`ctrl::R`](R) reader structure"]
impl crate::Readable for CTRL_SPEC {}
#[doc = "`write(|w| ..)` method takes [`ctrl::W`](W) writer structure"]
impl crate::Writable for CTRL_SPEC {
type Safety = crate::Unsafe;
}
#[doc = "`reset()` method sets CTRL to value 0x5555"]
impl crate::Resettable for CTRL_SPEC {
const RESET_VALUE: u32 = 0x5555;
}