#[doc = "Register `INT_RAW` reader"]
pub type R = crate::R<INT_RAW_SPEC>;
#[doc = "Register `INT_RAW` writer"]
pub type W = crate::W<INT_RAW_SPEC>;
#[doc = "Field `TIMER0_STOP` reader - "]
pub type TIMER0_STOP_R = crate::BitReader;
#[doc = "Field `TIMER0_STOP` writer - "]
pub type TIMER0_STOP_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TIMER1_STOP` reader - "]
pub type TIMER1_STOP_R = crate::BitReader;
#[doc = "Field `TIMER1_STOP` writer - "]
pub type TIMER1_STOP_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TIMER2_STOP` reader - "]
pub type TIMER2_STOP_R = crate::BitReader;
#[doc = "Field `TIMER2_STOP` writer - "]
pub type TIMER2_STOP_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TIMER0_TEZ` reader - "]
pub type TIMER0_TEZ_R = crate::BitReader;
#[doc = "Field `TIMER0_TEZ` writer - "]
pub type TIMER0_TEZ_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TIMER1_TEZ` reader - "]
pub type TIMER1_TEZ_R = crate::BitReader;
#[doc = "Field `TIMER1_TEZ` writer - "]
pub type TIMER1_TEZ_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TIMER2_TEZ` reader - "]
pub type TIMER2_TEZ_R = crate::BitReader;
#[doc = "Field `TIMER2_TEZ` writer - "]
pub type TIMER2_TEZ_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TIMER0_TEP` reader - "]
pub type TIMER0_TEP_R = crate::BitReader;
#[doc = "Field `TIMER0_TEP` writer - "]
pub type TIMER0_TEP_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TIMER1_TEP` reader - "]
pub type TIMER1_TEP_R = crate::BitReader;
#[doc = "Field `TIMER1_TEP` writer - "]
pub type TIMER1_TEP_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `TIMER2_TEP` reader - "]
pub type TIMER2_TEP_R = crate::BitReader;
#[doc = "Field `TIMER2_TEP` writer - "]
pub type TIMER2_TEP_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FAULT0` reader - "]
pub type FAULT0_R = crate::BitReader;
#[doc = "Field `FAULT0` writer - "]
pub type FAULT0_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FAULT1` reader - "]
pub type FAULT1_R = crate::BitReader;
#[doc = "Field `FAULT1` writer - "]
pub type FAULT1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FAULT2` reader - "]
pub type FAULT2_R = crate::BitReader;
#[doc = "Field `FAULT2` writer - "]
pub type FAULT2_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FAULT0_CLR` reader - "]
pub type FAULT0_CLR_R = crate::BitReader;
#[doc = "Field `FAULT0_CLR` writer - "]
pub type FAULT0_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FAULT1_CLR` reader - "]
pub type FAULT1_CLR_R = crate::BitReader;
#[doc = "Field `FAULT1_CLR` writer - "]
pub type FAULT1_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FAULT2_CLR` reader - "]
pub type FAULT2_CLR_R = crate::BitReader;
#[doc = "Field `FAULT2_CLR` writer - "]
pub type FAULT2_CLR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OP0_TEA` reader - "]
pub type OP0_TEA_R = crate::BitReader;
#[doc = "Field `OP0_TEA` writer - "]
pub type OP0_TEA_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OP1_TEA` reader - "]
pub type OP1_TEA_R = crate::BitReader;
#[doc = "Field `OP1_TEA` writer - "]
pub type OP1_TEA_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OP2_TEA` reader - "]
pub type OP2_TEA_R = crate::BitReader;
#[doc = "Field `OP2_TEA` writer - "]
pub type OP2_TEA_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OP0_TEB` reader - "]
pub type OP0_TEB_R = crate::BitReader;
#[doc = "Field `OP0_TEB` writer - "]
pub type OP0_TEB_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OP1_TEB` reader - "]
pub type OP1_TEB_R = crate::BitReader;
#[doc = "Field `OP1_TEB` writer - "]
pub type OP1_TEB_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `OP2_TEB` reader - "]
pub type OP2_TEB_R = crate::BitReader;
#[doc = "Field `OP2_TEB` writer - "]
pub type OP2_TEB_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FH0_CBC` reader - "]
pub type FH0_CBC_R = crate::BitReader;
#[doc = "Field `FH0_CBC` writer - "]
pub type FH0_CBC_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FH1_CBC` reader - "]
pub type FH1_CBC_R = crate::BitReader;
#[doc = "Field `FH1_CBC` writer - "]
pub type FH1_CBC_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FH2_CBC` reader - "]
pub type FH2_CBC_R = crate::BitReader;
#[doc = "Field `FH2_CBC` writer - "]
pub type FH2_CBC_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FH0_OST` reader - "]
pub type FH0_OST_R = crate::BitReader;
#[doc = "Field `FH0_OST` writer - "]
pub type FH0_OST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FH1_OST` reader - "]
pub type FH1_OST_R = crate::BitReader;
#[doc = "Field `FH1_OST` writer - "]
pub type FH1_OST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `FH2_OST` reader - "]
pub type FH2_OST_R = crate::BitReader;
#[doc = "Field `FH2_OST` writer - "]
pub type FH2_OST_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `CAP0` reader - "]
pub type CAP0_R = crate::BitReader;
#[doc = "Field `CAP0` writer - "]
pub type CAP0_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `CAP1` reader - "]
pub type CAP1_R = crate::BitReader;
#[doc = "Field `CAP1` writer - "]
pub type CAP1_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `CAP2` reader - "]
pub type CAP2_R = crate::BitReader;
#[doc = "Field `CAP2` writer - "]
pub type CAP2_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
#[doc = "Bit 0"]
#[inline(always)]
pub fn timer0_stop(&self) -> TIMER0_STOP_R {
TIMER0_STOP_R::new((self.bits & 1) != 0)
}
#[doc = "Bit 1"]
#[inline(always)]
pub fn timer1_stop(&self) -> TIMER1_STOP_R {
TIMER1_STOP_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 2"]
#[inline(always)]
pub fn timer2_stop(&self) -> TIMER2_STOP_R {
TIMER2_STOP_R::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bit 3"]
#[inline(always)]
pub fn timer0_tez(&self) -> TIMER0_TEZ_R {
TIMER0_TEZ_R::new(((self.bits >> 3) & 1) != 0)
}
#[doc = "Bit 4"]
#[inline(always)]
pub fn timer1_tez(&self) -> TIMER1_TEZ_R {
TIMER1_TEZ_R::new(((self.bits >> 4) & 1) != 0)
}
#[doc = "Bit 5"]
#[inline(always)]
pub fn timer2_tez(&self) -> TIMER2_TEZ_R {
TIMER2_TEZ_R::new(((self.bits >> 5) & 1) != 0)
}
#[doc = "Bit 6"]
#[inline(always)]
pub fn timer0_tep(&self) -> TIMER0_TEP_R {
TIMER0_TEP_R::new(((self.bits >> 6) & 1) != 0)
}
#[doc = "Bit 7"]
#[inline(always)]
pub fn timer1_tep(&self) -> TIMER1_TEP_R {
TIMER1_TEP_R::new(((self.bits >> 7) & 1) != 0)
}
#[doc = "Bit 8"]
#[inline(always)]
pub fn timer2_tep(&self) -> TIMER2_TEP_R {
TIMER2_TEP_R::new(((self.bits >> 8) & 1) != 0)
}
#[doc = "Bit 9"]
#[inline(always)]
pub fn fault0(&self) -> FAULT0_R {
FAULT0_R::new(((self.bits >> 9) & 1) != 0)
}
#[doc = "Bit 10"]
#[inline(always)]
pub fn fault1(&self) -> FAULT1_R {
FAULT1_R::new(((self.bits >> 10) & 1) != 0)
}
#[doc = "Bit 11"]
#[inline(always)]
pub fn fault2(&self) -> FAULT2_R {
FAULT2_R::new(((self.bits >> 11) & 1) != 0)
}
#[doc = "Bit 12"]
#[inline(always)]
pub fn fault0_clr(&self) -> FAULT0_CLR_R {
FAULT0_CLR_R::new(((self.bits >> 12) & 1) != 0)
}
#[doc = "Bit 13"]
#[inline(always)]
pub fn fault1_clr(&self) -> FAULT1_CLR_R {
FAULT1_CLR_R::new(((self.bits >> 13) & 1) != 0)
}
#[doc = "Bit 14"]
#[inline(always)]
pub fn fault2_clr(&self) -> FAULT2_CLR_R {
FAULT2_CLR_R::new(((self.bits >> 14) & 1) != 0)
}
#[doc = "Bit 15"]
#[inline(always)]
pub fn op0_tea(&self) -> OP0_TEA_R {
OP0_TEA_R::new(((self.bits >> 15) & 1) != 0)
}
#[doc = "Bit 16"]
#[inline(always)]
pub fn op1_tea(&self) -> OP1_TEA_R {
OP1_TEA_R::new(((self.bits >> 16) & 1) != 0)
}
#[doc = "Bit 17"]
#[inline(always)]
pub fn op2_tea(&self) -> OP2_TEA_R {
OP2_TEA_R::new(((self.bits >> 17) & 1) != 0)
}
#[doc = "Bit 18"]
#[inline(always)]
pub fn op0_teb(&self) -> OP0_TEB_R {
OP0_TEB_R::new(((self.bits >> 18) & 1) != 0)
}
#[doc = "Bit 19"]
#[inline(always)]
pub fn op1_teb(&self) -> OP1_TEB_R {
OP1_TEB_R::new(((self.bits >> 19) & 1) != 0)
}
#[doc = "Bit 20"]
#[inline(always)]
pub fn op2_teb(&self) -> OP2_TEB_R {
OP2_TEB_R::new(((self.bits >> 20) & 1) != 0)
}
#[doc = "Bit 21"]
#[inline(always)]
pub fn fh0_cbc(&self) -> FH0_CBC_R {
FH0_CBC_R::new(((self.bits >> 21) & 1) != 0)
}
#[doc = "Bit 22"]
#[inline(always)]
pub fn fh1_cbc(&self) -> FH1_CBC_R {
FH1_CBC_R::new(((self.bits >> 22) & 1) != 0)
}
#[doc = "Bit 23"]
#[inline(always)]
pub fn fh2_cbc(&self) -> FH2_CBC_R {
FH2_CBC_R::new(((self.bits >> 23) & 1) != 0)
}
#[doc = "Bit 24"]
#[inline(always)]
pub fn fh0_ost(&self) -> FH0_OST_R {
FH0_OST_R::new(((self.bits >> 24) & 1) != 0)
}
#[doc = "Bit 25"]
#[inline(always)]
pub fn fh1_ost(&self) -> FH1_OST_R {
FH1_OST_R::new(((self.bits >> 25) & 1) != 0)
}
#[doc = "Bit 26"]
#[inline(always)]
pub fn fh2_ost(&self) -> FH2_OST_R {
FH2_OST_R::new(((self.bits >> 26) & 1) != 0)
}
#[doc = "Bit 27"]
#[inline(always)]
pub fn cap0(&self) -> CAP0_R {
CAP0_R::new(((self.bits >> 27) & 1) != 0)
}
#[doc = "Bit 28"]
#[inline(always)]
pub fn cap1(&self) -> CAP1_R {
CAP1_R::new(((self.bits >> 28) & 1) != 0)
}
#[doc = "Bit 29"]
#[inline(always)]
pub fn cap2(&self) -> CAP2_R {
CAP2_R::new(((self.bits >> 29) & 1) != 0)
}
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
f.debug_struct("INT_RAW")
.field("timer0_stop", &self.timer0_stop())
.field("timer1_stop", &self.timer1_stop())
.field("timer2_stop", &self.timer2_stop())
.field("timer0_tez", &self.timer0_tez())
.field("timer1_tez", &self.timer1_tez())
.field("timer2_tez", &self.timer2_tez())
.field("timer0_tep", &self.timer0_tep())
.field("timer1_tep", &self.timer1_tep())
.field("timer2_tep", &self.timer2_tep())
.field("fault0", &self.fault0())
.field("fault1", &self.fault1())
.field("fault2", &self.fault2())
.field("fault0_clr", &self.fault0_clr())
.field("fault1_clr", &self.fault1_clr())
.field("fault2_clr", &self.fault2_clr())
.field("op0_tea", &self.op0_tea())
.field("op1_tea", &self.op1_tea())
.field("op2_tea", &self.op2_tea())
.field("op0_teb", &self.op0_teb())
.field("op1_teb", &self.op1_teb())
.field("op2_teb", &self.op2_teb())
.field("fh0_cbc", &self.fh0_cbc())
.field("fh1_cbc", &self.fh1_cbc())
.field("fh2_cbc", &self.fh2_cbc())
.field("fh0_ost", &self.fh0_ost())
.field("fh1_ost", &self.fh1_ost())
.field("fh2_ost", &self.fh2_ost())
.field("cap0", &self.cap0())
.field("cap1", &self.cap1())
.field("cap2", &self.cap2())
.finish()
}
}
impl W {
#[doc = "Bit 0"]
#[inline(always)]
pub fn timer0_stop(&mut self) -> TIMER0_STOP_W<'_, INT_RAW_SPEC> {
TIMER0_STOP_W::new(self, 0)
}
#[doc = "Bit 1"]
#[inline(always)]
pub fn timer1_stop(&mut self) -> TIMER1_STOP_W<'_, INT_RAW_SPEC> {
TIMER1_STOP_W::new(self, 1)
}
#[doc = "Bit 2"]
#[inline(always)]
pub fn timer2_stop(&mut self) -> TIMER2_STOP_W<'_, INT_RAW_SPEC> {
TIMER2_STOP_W::new(self, 2)
}
#[doc = "Bit 3"]
#[inline(always)]
pub fn timer0_tez(&mut self) -> TIMER0_TEZ_W<'_, INT_RAW_SPEC> {
TIMER0_TEZ_W::new(self, 3)
}
#[doc = "Bit 4"]
#[inline(always)]
pub fn timer1_tez(&mut self) -> TIMER1_TEZ_W<'_, INT_RAW_SPEC> {
TIMER1_TEZ_W::new(self, 4)
}
#[doc = "Bit 5"]
#[inline(always)]
pub fn timer2_tez(&mut self) -> TIMER2_TEZ_W<'_, INT_RAW_SPEC> {
TIMER2_TEZ_W::new(self, 5)
}
#[doc = "Bit 6"]
#[inline(always)]
pub fn timer0_tep(&mut self) -> TIMER0_TEP_W<'_, INT_RAW_SPEC> {
TIMER0_TEP_W::new(self, 6)
}
#[doc = "Bit 7"]
#[inline(always)]
pub fn timer1_tep(&mut self) -> TIMER1_TEP_W<'_, INT_RAW_SPEC> {
TIMER1_TEP_W::new(self, 7)
}
#[doc = "Bit 8"]
#[inline(always)]
pub fn timer2_tep(&mut self) -> TIMER2_TEP_W<'_, INT_RAW_SPEC> {
TIMER2_TEP_W::new(self, 8)
}
#[doc = "Bit 9"]
#[inline(always)]
pub fn fault0(&mut self) -> FAULT0_W<'_, INT_RAW_SPEC> {
FAULT0_W::new(self, 9)
}
#[doc = "Bit 10"]
#[inline(always)]
pub fn fault1(&mut self) -> FAULT1_W<'_, INT_RAW_SPEC> {
FAULT1_W::new(self, 10)
}
#[doc = "Bit 11"]
#[inline(always)]
pub fn fault2(&mut self) -> FAULT2_W<'_, INT_RAW_SPEC> {
FAULT2_W::new(self, 11)
}
#[doc = "Bit 12"]
#[inline(always)]
pub fn fault0_clr(&mut self) -> FAULT0_CLR_W<'_, INT_RAW_SPEC> {
FAULT0_CLR_W::new(self, 12)
}
#[doc = "Bit 13"]
#[inline(always)]
pub fn fault1_clr(&mut self) -> FAULT1_CLR_W<'_, INT_RAW_SPEC> {
FAULT1_CLR_W::new(self, 13)
}
#[doc = "Bit 14"]
#[inline(always)]
pub fn fault2_clr(&mut self) -> FAULT2_CLR_W<'_, INT_RAW_SPEC> {
FAULT2_CLR_W::new(self, 14)
}
#[doc = "Bit 15"]
#[inline(always)]
pub fn op0_tea(&mut self) -> OP0_TEA_W<'_, INT_RAW_SPEC> {
OP0_TEA_W::new(self, 15)
}
#[doc = "Bit 16"]
#[inline(always)]
pub fn op1_tea(&mut self) -> OP1_TEA_W<'_, INT_RAW_SPEC> {
OP1_TEA_W::new(self, 16)
}
#[doc = "Bit 17"]
#[inline(always)]
pub fn op2_tea(&mut self) -> OP2_TEA_W<'_, INT_RAW_SPEC> {
OP2_TEA_W::new(self, 17)
}
#[doc = "Bit 18"]
#[inline(always)]
pub fn op0_teb(&mut self) -> OP0_TEB_W<'_, INT_RAW_SPEC> {
OP0_TEB_W::new(self, 18)
}
#[doc = "Bit 19"]
#[inline(always)]
pub fn op1_teb(&mut self) -> OP1_TEB_W<'_, INT_RAW_SPEC> {
OP1_TEB_W::new(self, 19)
}
#[doc = "Bit 20"]
#[inline(always)]
pub fn op2_teb(&mut self) -> OP2_TEB_W<'_, INT_RAW_SPEC> {
OP2_TEB_W::new(self, 20)
}
#[doc = "Bit 21"]
#[inline(always)]
pub fn fh0_cbc(&mut self) -> FH0_CBC_W<'_, INT_RAW_SPEC> {
FH0_CBC_W::new(self, 21)
}
#[doc = "Bit 22"]
#[inline(always)]
pub fn fh1_cbc(&mut self) -> FH1_CBC_W<'_, INT_RAW_SPEC> {
FH1_CBC_W::new(self, 22)
}
#[doc = "Bit 23"]
#[inline(always)]
pub fn fh2_cbc(&mut self) -> FH2_CBC_W<'_, INT_RAW_SPEC> {
FH2_CBC_W::new(self, 23)
}
#[doc = "Bit 24"]
#[inline(always)]
pub fn fh0_ost(&mut self) -> FH0_OST_W<'_, INT_RAW_SPEC> {
FH0_OST_W::new(self, 24)
}
#[doc = "Bit 25"]
#[inline(always)]
pub fn fh1_ost(&mut self) -> FH1_OST_W<'_, INT_RAW_SPEC> {
FH1_OST_W::new(self, 25)
}
#[doc = "Bit 26"]
#[inline(always)]
pub fn fh2_ost(&mut self) -> FH2_OST_W<'_, INT_RAW_SPEC> {
FH2_OST_W::new(self, 26)
}
#[doc = "Bit 27"]
#[inline(always)]
pub fn cap0(&mut self) -> CAP0_W<'_, INT_RAW_SPEC> {
CAP0_W::new(self, 27)
}
#[doc = "Bit 28"]
#[inline(always)]
pub fn cap1(&mut self) -> CAP1_W<'_, INT_RAW_SPEC> {
CAP1_W::new(self, 28)
}
#[doc = "Bit 29"]
#[inline(always)]
pub fn cap2(&mut self) -> CAP2_W<'_, INT_RAW_SPEC> {
CAP2_W::new(self, 29)
}
}
#[doc = "\n\nYou can [`read`](crate::Reg::read) this register and get [`int_raw::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_raw::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct INT_RAW_SPEC;
impl crate::RegisterSpec for INT_RAW_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [`int_raw::R`](R) reader structure"]
impl crate::Readable for INT_RAW_SPEC {}
#[doc = "`write(|w| ..)` method takes [`int_raw::W`](W) writer structure"]
impl crate::Writable for INT_RAW_SPEC {
type Safety = crate::Unsafe;
}
#[doc = "`reset()` method sets INT_RAW to value 0"]
impl crate::Resettable for INT_RAW_SPEC {}