esp32 0.40.0

Peripheral access crate for the ESP32
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104

#[doc = "Register `SAR_MEAS_START2` reader"]
pub type R = crate::R<SAR_MEAS_START2_SPEC>;
#[doc = "Register `SAR_MEAS_START2` writer"]
pub type W = crate::W<SAR_MEAS_START2_SPEC>;
#[doc = "Field `MEAS2_DATA_SAR` reader - SAR ADC2 data"]
pub type MEAS2_DATA_SAR_R = crate::FieldReader<u16>;
#[doc = "Field `MEAS2_DONE_SAR` reader - SAR ADC2 conversion done indication"]
pub type MEAS2_DONE_SAR_R = crate::BitReader;
#[doc = "Field `MEAS2_START_SAR` reader - SAR ADC2 controller (in RTC) starts conversion only active when reg_meas2_start_force = 1"]
pub type MEAS2_START_SAR_R = crate::BitReader;
#[doc = "Field `MEAS2_START_SAR` writer - SAR ADC2 controller (in RTC) starts conversion only active when reg_meas2_start_force = 1"]
pub type MEAS2_START_SAR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `MEAS2_START_FORCE` reader - 1: SAR ADC2 controller (in RTC) is started by SW 0: SAR ADC2 controller is started by ULP-coprocessor"]
pub type MEAS2_START_FORCE_R = crate::BitReader;
#[doc = "Field `MEAS2_START_FORCE` writer - 1: SAR ADC2 controller (in RTC) is started by SW 0: SAR ADC2 controller is started by ULP-coprocessor"]
pub type MEAS2_START_FORCE_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `SAR2_EN_PAD` reader - SAR ADC2 pad enable bitmap only active when reg_sar2_en_pad_force = 1"]
pub type SAR2_EN_PAD_R = crate::FieldReader<u16>;
#[doc = "Field `SAR2_EN_PAD` writer - SAR ADC2 pad enable bitmap only active when reg_sar2_en_pad_force = 1"]
pub type SAR2_EN_PAD_W<'a, REG> = crate::FieldWriter<'a, REG, 12, u16>;
#[doc = "Field `SAR2_EN_PAD_FORCE` reader - 1: SAR ADC2 pad enable bitmap is controlled by SW 0: SAR ADC2 pad enable bitmap is controlled by ULP-coprocessor"]
pub type SAR2_EN_PAD_FORCE_R = crate::BitReader;
#[doc = "Field `SAR2_EN_PAD_FORCE` writer - 1: SAR ADC2 pad enable bitmap is controlled by SW 0: SAR ADC2 pad enable bitmap is controlled by ULP-coprocessor"]
pub type SAR2_EN_PAD_FORCE_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
    #[doc = "Bits 0:15 - SAR ADC2 data"]
    #[inline(always)]
    pub fn meas2_data_sar(&self) -> MEAS2_DATA_SAR_R {
        MEAS2_DATA_SAR_R::new((self.bits & 0xffff) as u16)
    }
    #[doc = "Bit 16 - SAR ADC2 conversion done indication"]
    #[inline(always)]
    pub fn meas2_done_sar(&self) -> MEAS2_DONE_SAR_R {
        MEAS2_DONE_SAR_R::new(((self.bits >> 16) & 1) != 0)
    }
    #[doc = "Bit 17 - SAR ADC2 controller (in RTC) starts conversion only active when reg_meas2_start_force = 1"]
    #[inline(always)]
    pub fn meas2_start_sar(&self) -> MEAS2_START_SAR_R {
        MEAS2_START_SAR_R::new(((self.bits >> 17) & 1) != 0)
    }
    #[doc = "Bit 18 - 1: SAR ADC2 controller (in RTC) is started by SW 0: SAR ADC2 controller is started by ULP-coprocessor"]
    #[inline(always)]
    pub fn meas2_start_force(&self) -> MEAS2_START_FORCE_R {
        MEAS2_START_FORCE_R::new(((self.bits >> 18) & 1) != 0)
    }
    #[doc = "Bits 19:30 - SAR ADC2 pad enable bitmap only active when reg_sar2_en_pad_force = 1"]
    #[inline(always)]
    pub fn sar2_en_pad(&self) -> SAR2_EN_PAD_R {
        SAR2_EN_PAD_R::new(((self.bits >> 19) & 0x0fff) as u16)
    }
    #[doc = "Bit 31 - 1: SAR ADC2 pad enable bitmap is controlled by SW 0: SAR ADC2 pad enable bitmap is controlled by ULP-coprocessor"]
    #[inline(always)]
    pub fn sar2_en_pad_force(&self) -> SAR2_EN_PAD_FORCE_R {
        SAR2_EN_PAD_FORCE_R::new(((self.bits >> 31) & 1) != 0)
    }
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("SAR_MEAS_START2")
            .field("meas2_data_sar", &self.meas2_data_sar())
            .field("meas2_done_sar", &self.meas2_done_sar())
            .field("meas2_start_sar", &self.meas2_start_sar())
            .field("meas2_start_force", &self.meas2_start_force())
            .field("sar2_en_pad", &self.sar2_en_pad())
            .field("sar2_en_pad_force", &self.sar2_en_pad_force())
            .finish()
    }
}
impl W {
    #[doc = "Bit 17 - SAR ADC2 controller (in RTC) starts conversion only active when reg_meas2_start_force = 1"]
    #[inline(always)]
    pub fn meas2_start_sar(&mut self) -> MEAS2_START_SAR_W<'_, SAR_MEAS_START2_SPEC> {
        MEAS2_START_SAR_W::new(self, 17)
    }
    #[doc = "Bit 18 - 1: SAR ADC2 controller (in RTC) is started by SW 0: SAR ADC2 controller is started by ULP-coprocessor"]
    #[inline(always)]
    pub fn meas2_start_force(&mut self) -> MEAS2_START_FORCE_W<'_, SAR_MEAS_START2_SPEC> {
        MEAS2_START_FORCE_W::new(self, 18)
    }
    #[doc = "Bits 19:30 - SAR ADC2 pad enable bitmap only active when reg_sar2_en_pad_force = 1"]
    #[inline(always)]
    pub fn sar2_en_pad(&mut self) -> SAR2_EN_PAD_W<'_, SAR_MEAS_START2_SPEC> {
        SAR2_EN_PAD_W::new(self, 19)
    }
    #[doc = "Bit 31 - 1: SAR ADC2 pad enable bitmap is controlled by SW 0: SAR ADC2 pad enable bitmap is controlled by ULP-coprocessor"]
    #[inline(always)]
    pub fn sar2_en_pad_force(&mut self) -> SAR2_EN_PAD_FORCE_W<'_, SAR_MEAS_START2_SPEC> {
        SAR2_EN_PAD_FORCE_W::new(self, 31)
    }
}
#[doc = "\n\nYou can [`read`](crate::Reg::read) this register and get [`sar_meas_start2::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`sar_meas_start2::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct SAR_MEAS_START2_SPEC;
impl crate::RegisterSpec for SAR_MEAS_START2_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [`sar_meas_start2::R`](R) reader structure"]
impl crate::Readable for SAR_MEAS_START2_SPEC {}
#[doc = "`write(|w| ..)` method takes [`sar_meas_start2::W`](W) writer structure"]
impl crate::Writable for SAR_MEAS_START2_SPEC {
    type Safety = crate::Unsafe;
}
#[doc = "`reset()` method sets SAR_MEAS_START2 to value 0"]
impl crate::Resettable for SAR_MEAS_START2_SPEC {}