#[doc = "Register `INT_CLR` writer"]
pub type W = crate::W<INT_CLR_SPEC>;
#[doc = "Field `CH_TX_END[0-7]` writer - Set this bit to clear the rmt_ch%s_rx_end_int_raw.."]
pub type CH_TX_END_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `CH_RX_END[0-7]` writer - Set this bit to clear the rmt_ch%s_tx_end_int_raw."]
pub type CH_RX_END_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `CH_ERR[0-7]` writer - Set this bit to clear the rmt_ch%s_err_int_raw."]
pub type CH_ERR_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `CH_TX_THR_EVENT[0-7]` writer - Set this bit to clear the rmt_ch%s_tx_thr_event_int_raw interrupt."]
pub type CH_TX_THR_EVENT_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for crate::generic::Reg<INT_CLR_SPEC> {
fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
write!(f, "(not readable)")
}
}
impl W {
#[doc = "Set this bit to clear the rmt_ch[0-7]_rx_end_int_raw.."]
#[inline(always)]
#[must_use]
pub unsafe fn ch_tx_end<const O: u8>(&mut self) -> CH_TX_END_W<INT_CLR_SPEC, O> {
CH_TX_END_W::new(self)
}
#[doc = "Bit 0 - Set this bit to clear the rmt_ch0_rx_end_int_raw.."]
#[inline(always)]
#[must_use]
pub fn ch0_tx_end(&mut self) -> CH_TX_END_W<INT_CLR_SPEC, 0> {
CH_TX_END_W::new(self)
}
#[doc = "Bit 3 - Set this bit to clear the rmt_ch1_rx_end_int_raw.."]
#[inline(always)]
#[must_use]
pub fn ch1_tx_end(&mut self) -> CH_TX_END_W<INT_CLR_SPEC, 3> {
CH_TX_END_W::new(self)
}
#[doc = "Bit 6 - Set this bit to clear the rmt_ch2_rx_end_int_raw.."]
#[inline(always)]
#[must_use]
pub fn ch2_tx_end(&mut self) -> CH_TX_END_W<INT_CLR_SPEC, 6> {
CH_TX_END_W::new(self)
}
#[doc = "Bit 9 - Set this bit to clear the rmt_ch3_rx_end_int_raw.."]
#[inline(always)]
#[must_use]
pub fn ch3_tx_end(&mut self) -> CH_TX_END_W<INT_CLR_SPEC, 9> {
CH_TX_END_W::new(self)
}
#[doc = "Bit 12 - Set this bit to clear the rmt_ch4_rx_end_int_raw.."]
#[inline(always)]
#[must_use]
pub fn ch4_tx_end(&mut self) -> CH_TX_END_W<INT_CLR_SPEC, 12> {
CH_TX_END_W::new(self)
}
#[doc = "Bit 15 - Set this bit to clear the rmt_ch5_rx_end_int_raw.."]
#[inline(always)]
#[must_use]
pub fn ch5_tx_end(&mut self) -> CH_TX_END_W<INT_CLR_SPEC, 15> {
CH_TX_END_W::new(self)
}
#[doc = "Bit 18 - Set this bit to clear the rmt_ch6_rx_end_int_raw.."]
#[inline(always)]
#[must_use]
pub fn ch6_tx_end(&mut self) -> CH_TX_END_W<INT_CLR_SPEC, 18> {
CH_TX_END_W::new(self)
}
#[doc = "Bit 21 - Set this bit to clear the rmt_ch7_rx_end_int_raw.."]
#[inline(always)]
#[must_use]
pub fn ch7_tx_end(&mut self) -> CH_TX_END_W<INT_CLR_SPEC, 21> {
CH_TX_END_W::new(self)
}
#[doc = "Set this bit to clear the rmt_ch[0-7]_tx_end_int_raw."]
#[inline(always)]
#[must_use]
pub unsafe fn ch_rx_end<const O: u8>(&mut self) -> CH_RX_END_W<INT_CLR_SPEC, O> {
CH_RX_END_W::new(self)
}
#[doc = "Bit 1 - Set this bit to clear the rmt_ch0_tx_end_int_raw."]
#[inline(always)]
#[must_use]
pub fn ch0_rx_end(&mut self) -> CH_RX_END_W<INT_CLR_SPEC, 1> {
CH_RX_END_W::new(self)
}
#[doc = "Bit 4 - Set this bit to clear the rmt_ch1_tx_end_int_raw."]
#[inline(always)]
#[must_use]
pub fn ch1_rx_end(&mut self) -> CH_RX_END_W<INT_CLR_SPEC, 4> {
CH_RX_END_W::new(self)
}
#[doc = "Bit 7 - Set this bit to clear the rmt_ch2_tx_end_int_raw."]
#[inline(always)]
#[must_use]
pub fn ch2_rx_end(&mut self) -> CH_RX_END_W<INT_CLR_SPEC, 7> {
CH_RX_END_W::new(self)
}
#[doc = "Bit 10 - Set this bit to clear the rmt_ch3_tx_end_int_raw."]
#[inline(always)]
#[must_use]
pub fn ch3_rx_end(&mut self) -> CH_RX_END_W<INT_CLR_SPEC, 10> {
CH_RX_END_W::new(self)
}
#[doc = "Bit 13 - Set this bit to clear the rmt_ch4_tx_end_int_raw."]
#[inline(always)]
#[must_use]
pub fn ch4_rx_end(&mut self) -> CH_RX_END_W<INT_CLR_SPEC, 13> {
CH_RX_END_W::new(self)
}
#[doc = "Bit 16 - Set this bit to clear the rmt_ch5_tx_end_int_raw."]
#[inline(always)]
#[must_use]
pub fn ch5_rx_end(&mut self) -> CH_RX_END_W<INT_CLR_SPEC, 16> {
CH_RX_END_W::new(self)
}
#[doc = "Bit 19 - Set this bit to clear the rmt_ch6_tx_end_int_raw."]
#[inline(always)]
#[must_use]
pub fn ch6_rx_end(&mut self) -> CH_RX_END_W<INT_CLR_SPEC, 19> {
CH_RX_END_W::new(self)
}
#[doc = "Bit 22 - Set this bit to clear the rmt_ch7_tx_end_int_raw."]
#[inline(always)]
#[must_use]
pub fn ch7_rx_end(&mut self) -> CH_RX_END_W<INT_CLR_SPEC, 22> {
CH_RX_END_W::new(self)
}
#[doc = "Set this bit to clear the rmt_ch[0-7]_err_int_raw."]
#[inline(always)]
#[must_use]
pub unsafe fn ch_err<const O: u8>(&mut self) -> CH_ERR_W<INT_CLR_SPEC, O> {
CH_ERR_W::new(self)
}
#[doc = "Bit 2 - Set this bit to clear the rmt_ch0_err_int_raw."]
#[inline(always)]
#[must_use]
pub fn ch0_err(&mut self) -> CH_ERR_W<INT_CLR_SPEC, 2> {
CH_ERR_W::new(self)
}
#[doc = "Bit 5 - Set this bit to clear the rmt_ch1_err_int_raw."]
#[inline(always)]
#[must_use]
pub fn ch1_err(&mut self) -> CH_ERR_W<INT_CLR_SPEC, 5> {
CH_ERR_W::new(self)
}
#[doc = "Bit 8 - Set this bit to clear the rmt_ch2_err_int_raw."]
#[inline(always)]
#[must_use]
pub fn ch2_err(&mut self) -> CH_ERR_W<INT_CLR_SPEC, 8> {
CH_ERR_W::new(self)
}
#[doc = "Bit 11 - Set this bit to clear the rmt_ch3_err_int_raw."]
#[inline(always)]
#[must_use]
pub fn ch3_err(&mut self) -> CH_ERR_W<INT_CLR_SPEC, 11> {
CH_ERR_W::new(self)
}
#[doc = "Bit 14 - Set this bit to clear the rmt_ch4_err_int_raw."]
#[inline(always)]
#[must_use]
pub fn ch4_err(&mut self) -> CH_ERR_W<INT_CLR_SPEC, 14> {
CH_ERR_W::new(self)
}
#[doc = "Bit 17 - Set this bit to clear the rmt_ch5_err_int_raw."]
#[inline(always)]
#[must_use]
pub fn ch5_err(&mut self) -> CH_ERR_W<INT_CLR_SPEC, 17> {
CH_ERR_W::new(self)
}
#[doc = "Bit 20 - Set this bit to clear the rmt_ch6_err_int_raw."]
#[inline(always)]
#[must_use]
pub fn ch6_err(&mut self) -> CH_ERR_W<INT_CLR_SPEC, 20> {
CH_ERR_W::new(self)
}
#[doc = "Bit 23 - Set this bit to clear the rmt_ch7_err_int_raw."]
#[inline(always)]
#[must_use]
pub fn ch7_err(&mut self) -> CH_ERR_W<INT_CLR_SPEC, 23> {
CH_ERR_W::new(self)
}
#[doc = "Set this bit to clear the rmt_ch[0-7]_tx_thr_event_int_raw interrupt."]
#[inline(always)]
#[must_use]
pub unsafe fn ch_tx_thr_event<const O: u8>(&mut self) -> CH_TX_THR_EVENT_W<INT_CLR_SPEC, O> {
CH_TX_THR_EVENT_W::new(self)
}
#[doc = "Bit 24 - Set this bit to clear the rmt_ch0_tx_thr_event_int_raw interrupt."]
#[inline(always)]
#[must_use]
pub fn ch0_tx_thr_event(&mut self) -> CH_TX_THR_EVENT_W<INT_CLR_SPEC, 24> {
CH_TX_THR_EVENT_W::new(self)
}
#[doc = "Bit 25 - Set this bit to clear the rmt_ch1_tx_thr_event_int_raw interrupt."]
#[inline(always)]
#[must_use]
pub fn ch1_tx_thr_event(&mut self) -> CH_TX_THR_EVENT_W<INT_CLR_SPEC, 25> {
CH_TX_THR_EVENT_W::new(self)
}
#[doc = "Bit 26 - Set this bit to clear the rmt_ch2_tx_thr_event_int_raw interrupt."]
#[inline(always)]
#[must_use]
pub fn ch2_tx_thr_event(&mut self) -> CH_TX_THR_EVENT_W<INT_CLR_SPEC, 26> {
CH_TX_THR_EVENT_W::new(self)
}
#[doc = "Bit 27 - Set this bit to clear the rmt_ch3_tx_thr_event_int_raw interrupt."]
#[inline(always)]
#[must_use]
pub fn ch3_tx_thr_event(&mut self) -> CH_TX_THR_EVENT_W<INT_CLR_SPEC, 27> {
CH_TX_THR_EVENT_W::new(self)
}
#[doc = "Bit 28 - Set this bit to clear the rmt_ch4_tx_thr_event_int_raw interrupt."]
#[inline(always)]
#[must_use]
pub fn ch4_tx_thr_event(&mut self) -> CH_TX_THR_EVENT_W<INT_CLR_SPEC, 28> {
CH_TX_THR_EVENT_W::new(self)
}
#[doc = "Bit 29 - Set this bit to clear the rmt_ch5_tx_thr_event_int_raw interrupt."]
#[inline(always)]
#[must_use]
pub fn ch5_tx_thr_event(&mut self) -> CH_TX_THR_EVENT_W<INT_CLR_SPEC, 29> {
CH_TX_THR_EVENT_W::new(self)
}
#[doc = "Bit 30 - Set this bit to clear the rmt_ch6_tx_thr_event_int_raw interrupt."]
#[inline(always)]
#[must_use]
pub fn ch6_tx_thr_event(&mut self) -> CH_TX_THR_EVENT_W<INT_CLR_SPEC, 30> {
CH_TX_THR_EVENT_W::new(self)
}
#[doc = "Bit 31 - Set this bit to clear the rmt_ch7_tx_thr_event_int_raw interrupt."]
#[inline(always)]
#[must_use]
pub fn ch7_tx_thr_event(&mut self) -> CH_TX_THR_EVENT_W<INT_CLR_SPEC, 31> {
CH_TX_THR_EVENT_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.bits = bits;
self
}
}
#[doc = "\n\nYou can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`int_clr::W`](W). See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct INT_CLR_SPEC;
impl crate::RegisterSpec for INT_CLR_SPEC {
type Ux = u32;
}
#[doc = "`write(|w| ..)` method takes [`int_clr::W`](W) writer structure"]
impl crate::Writable for INT_CLR_SPEC {
const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets INT_CLR to value 0"]
impl crate::Resettable for INT_CLR_SPEC {
const RESET_VALUE: Self::Ux = 0;
}