#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
#[doc = "0x00 - Control register"]
pub ctrl: crate::Reg<ctrl::CTRL_SPEC>,
_reserved1: [u8; 0x04],
#[doc = "0x08 - Clock divider configuration register"]
pub clkdiv: crate::Reg<clkdiv::CLKDIV_SPEC>,
#[doc = "0x0c - Clock source selection register"]
pub clksrc: crate::Reg<clksrc::CLKSRC_SPEC>,
#[doc = "0x10 - Clock enable register"]
pub clkena: crate::Reg<clkena::CLKENA_SPEC>,
#[doc = "0x14 - Data and response timeout configuration register"]
pub tmout: crate::Reg<tmout::TMOUT_SPEC>,
#[doc = "0x18 - Card bus width configuration register"]
pub ctype: crate::Reg<ctype::CTYPE_SPEC>,
#[doc = "0x1c - Card data block size configuration register"]
pub blksiz: crate::Reg<blksiz::BLKSIZ_SPEC>,
#[doc = "0x20 - Data transfer length configuration register"]
pub bytcnt: crate::Reg<bytcnt::BYTCNT_SPEC>,
#[doc = "0x24 - SDIO interrupt mask register"]
pub intmask: crate::Reg<intmask::INTMASK_SPEC>,
#[doc = "0x28 - Command argument data register"]
pub cmdarg: crate::Reg<cmdarg::CMDARG_SPEC>,
#[doc = "0x2c - Command and boot configuration register"]
pub cmd: crate::Reg<cmd::CMD_SPEC>,
#[doc = "0x30 - Response data register"]
pub resp0: crate::Reg<resp0::RESP0_SPEC>,
#[doc = "0x34 - Long response data register"]
pub resp1: crate::Reg<resp1::RESP1_SPEC>,
#[doc = "0x38 - Long response data register"]
pub resp2: crate::Reg<resp2::RESP2_SPEC>,
#[doc = "0x3c - Long response data register"]
pub resp3: crate::Reg<resp3::RESP3_SPEC>,
#[doc = "0x40 - Masked interrupt status register"]
pub mintsts: crate::Reg<mintsts::MINTSTS_SPEC>,
#[doc = "0x44 - Raw interrupt status register"]
pub rintsts: crate::Reg<rintsts::RINTSTS_SPEC>,
#[doc = "0x48 - SD/MMC status register"]
pub status: crate::Reg<status::STATUS_SPEC>,
#[doc = "0x4c - FIFO configuration register"]
pub fifoth: crate::Reg<fifoth::FIFOTH_SPEC>,
#[doc = "0x50 - Card detect register"]
pub cdetect: crate::Reg<cdetect::CDETECT_SPEC>,
#[doc = "0x54 - Card write protection (WP) status register"]
pub wrtprt: crate::Reg<wrtprt::WRTPRT_SPEC>,
_reserved21: [u8; 0x04],
#[doc = "0x5c - Transferred byte count register"]
pub tcbcnt: crate::Reg<tcbcnt::TCBCNT_SPEC>,
#[doc = "0x60 - Transferred byte count register"]
pub tbbcnt: crate::Reg<tbbcnt::TBBCNT_SPEC>,
#[doc = "0x64 - Debounce filter time configuration register"]
pub debnce: crate::Reg<debnce::DEBNCE_SPEC>,
#[doc = "0x68 - User ID (scratchpad) register"]
pub usrid: crate::Reg<usrid::USRID_SPEC>,
#[doc = "0x6c - Version ID (scratchpad) register"]
pub verid: crate::Reg<verid::VERID_SPEC>,
#[doc = "0x70 - Hardware feature register"]
pub hcon: crate::Reg<hcon::HCON_SPEC>,
#[doc = "0x74 - UHS-1 register"]
pub uhs: crate::Reg<uhs::UHS_SPEC>,
#[doc = "0x78 - Card reset register"]
pub rst_n: crate::Reg<rst_n::RST_N_SPEC>,
_reserved29: [u8; 0x04],
#[doc = "0x80 - Burst mode transfer configuration register"]
pub bmod: crate::Reg<bmod::BMOD_SPEC>,
#[doc = "0x84 - Poll demand configuration register"]
pub pldmnd: crate::Reg<pldmnd::PLDMND_SPEC>,
#[doc = "0x88 - Descriptor base address register"]
pub dbaddr: crate::Reg<dbaddr::DBADDR_SPEC>,
#[doc = "0x8c - IDMAC status register"]
pub idsts: crate::Reg<idsts::IDSTS_SPEC>,
#[doc = "0x90 - IDMAC interrupt enable register"]
pub idinten: crate::Reg<idinten::IDINTEN_SPEC>,
#[doc = "0x94 - Host descriptor address pointer"]
pub dscaddr: crate::Reg<dscaddr::DSCADDR_SPEC>,
#[doc = "0x98 - Host buffer address pointer register"]
pub bufaddr: crate::Reg<bufaddr::BUFADDR_SPEC>,
_reserved36: [u8; 0x64],
#[doc = "0x100 - Card Threshold Control register"]
pub cardthrctl: crate::Reg<cardthrctl::CARDTHRCTL_SPEC>,
_reserved37: [u8; 0x08],
#[doc = "0x10c - eMMC DDR register"]
pub emmcddr: crate::Reg<emmcddr::EMMCDDR_SPEC>,
#[doc = "0x110 - Enable Phase Shift register"]
pub enshift: crate::Reg<enshift::ENSHIFT_SPEC>,
_reserved39: [u8; 0xec],
#[doc = "0x200 - CPU write and read transmit data by FIFO"]
pub buffifo: crate::Reg<buffifo::BUFFIFO_SPEC>,
_reserved40: [u8; 0x05fc],
#[doc = "0x800 - SDIO control register."]
pub clk_edge_sel: crate::Reg<clk_edge_sel::CLK_EDGE_SEL_SPEC>,
}
#[doc = "CTRL register accessor: an alias for `Reg<CTRL_SPEC>`"]
pub type CTRL = crate::Reg<ctrl::CTRL_SPEC>;
#[doc = "Control register"]
pub mod ctrl;
#[doc = "CLKDIV register accessor: an alias for `Reg<CLKDIV_SPEC>`"]
pub type CLKDIV = crate::Reg<clkdiv::CLKDIV_SPEC>;
#[doc = "Clock divider configuration register"]
pub mod clkdiv;
#[doc = "CLKSRC register accessor: an alias for `Reg<CLKSRC_SPEC>`"]
pub type CLKSRC = crate::Reg<clksrc::CLKSRC_SPEC>;
#[doc = "Clock source selection register"]
pub mod clksrc;
#[doc = "CLKENA register accessor: an alias for `Reg<CLKENA_SPEC>`"]
pub type CLKENA = crate::Reg<clkena::CLKENA_SPEC>;
#[doc = "Clock enable register"]
pub mod clkena;
#[doc = "TMOUT register accessor: an alias for `Reg<TMOUT_SPEC>`"]
pub type TMOUT = crate::Reg<tmout::TMOUT_SPEC>;
#[doc = "Data and response timeout configuration register"]
pub mod tmout;
#[doc = "CTYPE register accessor: an alias for `Reg<CTYPE_SPEC>`"]
pub type CTYPE = crate::Reg<ctype::CTYPE_SPEC>;
#[doc = "Card bus width configuration register"]
pub mod ctype;
#[doc = "BLKSIZ register accessor: an alias for `Reg<BLKSIZ_SPEC>`"]
pub type BLKSIZ = crate::Reg<blksiz::BLKSIZ_SPEC>;
#[doc = "Card data block size configuration register"]
pub mod blksiz;
#[doc = "BYTCNT register accessor: an alias for `Reg<BYTCNT_SPEC>`"]
pub type BYTCNT = crate::Reg<bytcnt::BYTCNT_SPEC>;
#[doc = "Data transfer length configuration register"]
pub mod bytcnt;
#[doc = "INTMASK register accessor: an alias for `Reg<INTMASK_SPEC>`"]
pub type INTMASK = crate::Reg<intmask::INTMASK_SPEC>;
#[doc = "SDIO interrupt mask register"]
pub mod intmask;
#[doc = "CMDARG register accessor: an alias for `Reg<CMDARG_SPEC>`"]
pub type CMDARG = crate::Reg<cmdarg::CMDARG_SPEC>;
#[doc = "Command argument data register"]
pub mod cmdarg;
#[doc = "CMD register accessor: an alias for `Reg<CMD_SPEC>`"]
pub type CMD = crate::Reg<cmd::CMD_SPEC>;
#[doc = "Command and boot configuration register"]
pub mod cmd;
#[doc = "RESP0 register accessor: an alias for `Reg<RESP0_SPEC>`"]
pub type RESP0 = crate::Reg<resp0::RESP0_SPEC>;
#[doc = "Response data register"]
pub mod resp0;
#[doc = "RESP1 register accessor: an alias for `Reg<RESP1_SPEC>`"]
pub type RESP1 = crate::Reg<resp1::RESP1_SPEC>;
#[doc = "Long response data register"]
pub mod resp1;
#[doc = "RESP2 register accessor: an alias for `Reg<RESP2_SPEC>`"]
pub type RESP2 = crate::Reg<resp2::RESP2_SPEC>;
#[doc = "Long response data register"]
pub mod resp2;
#[doc = "RESP3 register accessor: an alias for `Reg<RESP3_SPEC>`"]
pub type RESP3 = crate::Reg<resp3::RESP3_SPEC>;
#[doc = "Long response data register"]
pub mod resp3;
#[doc = "MINTSTS register accessor: an alias for `Reg<MINTSTS_SPEC>`"]
pub type MINTSTS = crate::Reg<mintsts::MINTSTS_SPEC>;
#[doc = "Masked interrupt status register"]
pub mod mintsts;
#[doc = "RINTSTS register accessor: an alias for `Reg<RINTSTS_SPEC>`"]
pub type RINTSTS = crate::Reg<rintsts::RINTSTS_SPEC>;
#[doc = "Raw interrupt status register"]
pub mod rintsts;
#[doc = "STATUS register accessor: an alias for `Reg<STATUS_SPEC>`"]
pub type STATUS = crate::Reg<status::STATUS_SPEC>;
#[doc = "SD/MMC status register"]
pub mod status;
#[doc = "FIFOTH register accessor: an alias for `Reg<FIFOTH_SPEC>`"]
pub type FIFOTH = crate::Reg<fifoth::FIFOTH_SPEC>;
#[doc = "FIFO configuration register"]
pub mod fifoth;
#[doc = "CDETECT register accessor: an alias for `Reg<CDETECT_SPEC>`"]
pub type CDETECT = crate::Reg<cdetect::CDETECT_SPEC>;
#[doc = "Card detect register"]
pub mod cdetect;
#[doc = "WRTPRT register accessor: an alias for `Reg<WRTPRT_SPEC>`"]
pub type WRTPRT = crate::Reg<wrtprt::WRTPRT_SPEC>;
#[doc = "Card write protection (WP) status register"]
pub mod wrtprt;
#[doc = "TCBCNT register accessor: an alias for `Reg<TCBCNT_SPEC>`"]
pub type TCBCNT = crate::Reg<tcbcnt::TCBCNT_SPEC>;
#[doc = "Transferred byte count register"]
pub mod tcbcnt;
#[doc = "TBBCNT register accessor: an alias for `Reg<TBBCNT_SPEC>`"]
pub type TBBCNT = crate::Reg<tbbcnt::TBBCNT_SPEC>;
#[doc = "Transferred byte count register"]
pub mod tbbcnt;
#[doc = "DEBNCE register accessor: an alias for `Reg<DEBNCE_SPEC>`"]
pub type DEBNCE = crate::Reg<debnce::DEBNCE_SPEC>;
#[doc = "Debounce filter time configuration register"]
pub mod debnce;
#[doc = "USRID register accessor: an alias for `Reg<USRID_SPEC>`"]
pub type USRID = crate::Reg<usrid::USRID_SPEC>;
#[doc = "User ID (scratchpad) register"]
pub mod usrid;
#[doc = "VERID register accessor: an alias for `Reg<VERID_SPEC>`"]
pub type VERID = crate::Reg<verid::VERID_SPEC>;
#[doc = "Version ID (scratchpad) register"]
pub mod verid;
#[doc = "HCON register accessor: an alias for `Reg<HCON_SPEC>`"]
pub type HCON = crate::Reg<hcon::HCON_SPEC>;
#[doc = "Hardware feature register"]
pub mod hcon;
#[doc = "UHS register accessor: an alias for `Reg<UHS_SPEC>`"]
pub type UHS = crate::Reg<uhs::UHS_SPEC>;
#[doc = "UHS-1 register"]
pub mod uhs;
#[doc = "RST_N register accessor: an alias for `Reg<RST_N_SPEC>`"]
pub type RST_N = crate::Reg<rst_n::RST_N_SPEC>;
#[doc = "Card reset register"]
pub mod rst_n;
#[doc = "BMOD register accessor: an alias for `Reg<BMOD_SPEC>`"]
pub type BMOD = crate::Reg<bmod::BMOD_SPEC>;
#[doc = "Burst mode transfer configuration register"]
pub mod bmod;
#[doc = "PLDMND register accessor: an alias for `Reg<PLDMND_SPEC>`"]
pub type PLDMND = crate::Reg<pldmnd::PLDMND_SPEC>;
#[doc = "Poll demand configuration register"]
pub mod pldmnd;
#[doc = "DBADDR register accessor: an alias for `Reg<DBADDR_SPEC>`"]
pub type DBADDR = crate::Reg<dbaddr::DBADDR_SPEC>;
#[doc = "Descriptor base address register"]
pub mod dbaddr;
#[doc = "IDSTS register accessor: an alias for `Reg<IDSTS_SPEC>`"]
pub type IDSTS = crate::Reg<idsts::IDSTS_SPEC>;
#[doc = "IDMAC status register"]
pub mod idsts;
#[doc = "IDINTEN register accessor: an alias for `Reg<IDINTEN_SPEC>`"]
pub type IDINTEN = crate::Reg<idinten::IDINTEN_SPEC>;
#[doc = "IDMAC interrupt enable register"]
pub mod idinten;
#[doc = "DSCADDR register accessor: an alias for `Reg<DSCADDR_SPEC>`"]
pub type DSCADDR = crate::Reg<dscaddr::DSCADDR_SPEC>;
#[doc = "Host descriptor address pointer"]
pub mod dscaddr;
#[doc = "BUFADDR register accessor: an alias for `Reg<BUFADDR_SPEC>`"]
pub type BUFADDR = crate::Reg<bufaddr::BUFADDR_SPEC>;
#[doc = "Host buffer address pointer register"]
pub mod bufaddr;
#[doc = "CARDTHRCTL register accessor: an alias for `Reg<CARDTHRCTL_SPEC>`"]
pub type CARDTHRCTL = crate::Reg<cardthrctl::CARDTHRCTL_SPEC>;
#[doc = "Card Threshold Control register"]
pub mod cardthrctl;
#[doc = "EMMCDDR register accessor: an alias for `Reg<EMMCDDR_SPEC>`"]
pub type EMMCDDR = crate::Reg<emmcddr::EMMCDDR_SPEC>;
#[doc = "eMMC DDR register"]
pub mod emmcddr;
#[doc = "ENSHIFT register accessor: an alias for `Reg<ENSHIFT_SPEC>`"]
pub type ENSHIFT = crate::Reg<enshift::ENSHIFT_SPEC>;
#[doc = "Enable Phase Shift register"]
pub mod enshift;
#[doc = "BUFFIFO register accessor: an alias for `Reg<BUFFIFO_SPEC>`"]
pub type BUFFIFO = crate::Reg<buffifo::BUFFIFO_SPEC>;
#[doc = "CPU write and read transmit data by FIFO"]
pub mod buffifo;
#[doc = "CLK_EDGE_SEL register accessor: an alias for `Reg<CLK_EDGE_SEL_SPEC>`"]
pub type CLK_EDGE_SEL = crate::Reg<clk_edge_sel::CLK_EDGE_SEL_SPEC>;
#[doc = "SDIO control register."]
pub mod clk_edge_sel;