esp-hal-common 0.8.0

use crate::clock::{ApbClock, Clock, CpuClock, PllClock, XtalClock};

extern "C" {
    fn ets_update_cpu_frequency(ticks_per_us: u32);
}

const I2C_BBPLL: u8 = 0x66;
const I2C_BBPLL_HOSTID: u8 = 0;

const I2C_BBPLL_OC_REF_DIV: u8 = 2;
const I2C_BBPLL_OC_DCHGP_LSB: u32 = 4;

const I2C_BBPLL_OC_DIV_7_0: u8 = 3;

const I2C_BBPLL_OC_DR1: u8 = 5;
const I2C_BBPLL_OC_DR1_MSB: u8 = 2;
const I2C_BBPLL_OC_DR1_LSB: u8 = 0;

const I2C_BBPLL_OC_DR3: u8 = 5;
const I2C_BBPLL_OC_DR3_MSB: u8 = 6;
const I2C_BBPLL_OC_DR3_LSB: u8 = 4;

const I2C_BBPLL_OC_DCUR: u8 = 6;

const I2C_BBPLL_OC_DHREF_SEL_LSB: u32 = 4;

const I2C_BBPLL_OC_DLREF_SEL_LSB: u32 = 6;

const I2C_BBPLL_OC_VCO_DBIAS: u8 = 9;
const I2C_BBPLL_OC_VCO_DBIAS_MSB: u8 = 1;
const I2C_BBPLL_OC_VCO_DBIAS_LSB: u8 = 0;

// Analog function control register
const I2C_MST_ANA_CONF0_REG: u32 = 0x600AF818;
const I2C_MST_BBPLL_STOP_FORCE_HIGH: u32 = 1 << 2;
const I2C_MST_BBPLL_STOP_FORCE_LOW: u32 = 1 << 3;
const I2C_MST_BBPLL_CAL_DONE: u32 = 1 << 24;

const MODEM_LPCON_CLK_CONF_FORCE_ON_REG: u32 = DR_REG_MODEM_LPCON_BASE + 0x1c;
const MODEM_LPCON_CLK_I2C_MST_FO: u32 = 1 << 2;
const MODEM_LPCON_I2C_MST_CLK_CONF_REG: u32 = DR_REG_MODEM_LPCON_BASE + 0x10;
const MODEM_LPCON_CLK_I2C_MST_SEL_160M: u32 = 1 << 0;

pub(crate) fn esp32c6_rtc_bbpll_configure(_xtal_freq: XtalClock, _pll_freq: PllClock) {
    unsafe {
        // enable i2c mst clk by force on temporarily
        (MODEM_LPCON_CLK_CONF_FORCE_ON_REG as *mut u32).write_volatile(
            (MODEM_LPCON_CLK_CONF_FORCE_ON_REG as *mut u32).read_volatile()
                | MODEM_LPCON_CLK_I2C_MST_FO,
        );
        (MODEM_LPCON_I2C_MST_CLK_CONF_REG as *mut u32).write_volatile(
            (MODEM_LPCON_I2C_MST_CLK_CONF_REG as *mut u32).read_volatile()
                | MODEM_LPCON_CLK_I2C_MST_SEL_160M,
        );

        let i2c_mst_ana_conf0_reg_ptr = I2C_MST_ANA_CONF0_REG as *mut u32;
        // BBPLL CALIBRATION START
        i2c_mst_ana_conf0_reg_ptr.write_volatile(
            i2c_mst_ana_conf0_reg_ptr.read_volatile() & !I2C_MST_BBPLL_STOP_FORCE_HIGH,
        );
        i2c_mst_ana_conf0_reg_ptr.write_volatile(
            i2c_mst_ana_conf0_reg_ptr.read_volatile() | I2C_MST_BBPLL_STOP_FORCE_LOW,
        );

        let div_ref = 0u32;
        let div7_0 = 8u32;
        let dr1 = 0u32;
        let dr3 = 0u32;
        let dchgp = 5u32;
        let dcur = 3u32;
        let dbias = 2u32;

        let i2c_bbpll_lref = (dchgp << I2C_BBPLL_OC_DCHGP_LSB) | div_ref;
        let i2c_bbpll_div_7_0 = div7_0;
        let i2c_bbpll_dcur =
            (1 << I2C_BBPLL_OC_DLREF_SEL_LSB) | (3 << I2C_BBPLL_OC_DHREF_SEL_LSB) | dcur;

        regi2c_write(
            I2C_BBPLL,
            I2C_BBPLL_HOSTID,
            I2C_BBPLL_OC_REF_DIV,
            i2c_bbpll_lref as u8,
        );
        regi2c_write(
            I2C_BBPLL,
            I2C_BBPLL_HOSTID,
            I2C_BBPLL_OC_DIV_7_0,
            i2c_bbpll_div_7_0 as u8,
        );
        regi2c_write_mask(
            I2C_BBPLL,
            I2C_BBPLL_HOSTID,
            I2C_BBPLL_OC_DR1,
            I2C_BBPLL_OC_DR1_MSB,
            I2C_BBPLL_OC_DR1_LSB,
            dr1 as u8,
        );
        regi2c_write_mask(
            I2C_BBPLL,
            I2C_BBPLL_HOSTID,
            I2C_BBPLL_OC_DR3,
            I2C_BBPLL_OC_DR3_MSB,
            I2C_BBPLL_OC_DR3_LSB,
            dr3 as u8,
        );
        regi2c_write(
            I2C_BBPLL,
            I2C_BBPLL_HOSTID,
            I2C_BBPLL_OC_DCUR,
            i2c_bbpll_dcur as u8,
        );
        regi2c_write_mask(
            I2C_BBPLL,
            I2C_BBPLL_HOSTID,
            I2C_BBPLL_OC_VCO_DBIAS,
            I2C_BBPLL_OC_VCO_DBIAS_MSB,
            I2C_BBPLL_OC_VCO_DBIAS_LSB,
            dbias as u8,
        );

        // WAIT CALIBRATION DONE
        while (i2c_mst_ana_conf0_reg_ptr.read_volatile() & I2C_MST_BBPLL_CAL_DONE) == 0 {}

        // BBPLL CALIBRATION STOP
        i2c_mst_ana_conf0_reg_ptr.write_volatile(
            i2c_mst_ana_conf0_reg_ptr.read_volatile() | I2C_MST_BBPLL_STOP_FORCE_HIGH,
        );
        i2c_mst_ana_conf0_reg_ptr.write_volatile(
            i2c_mst_ana_conf0_reg_ptr.read_volatile() & !I2C_MST_BBPLL_STOP_FORCE_LOW,
        );
    }
}

pub(crate) fn esp32c6_rtc_bbpll_enable() {
    let pmu = unsafe { &*crate::peripherals::PMU::PTR };

    pmu.imm_hp_ck_power.modify(|_, w| {
        w.tie_high_xpd_bb_i2c()
            .set_bit()
            .tie_high_xpd_bbpll()
            .set_bit()
            .tie_high_xpd_bbpll_i2c()
            .set_bit()
    });

    pmu.imm_hp_ck_power
        .modify(|_, w| w.tie_high_global_bbpll_icg().set_bit());
}

pub(crate) fn esp32c6_rtc_update_to_xtal(freq: XtalClock, _div: u8) {
    let pcr = unsafe { &*crate::peripherals::PCR::PTR };
    unsafe {
        ets_update_cpu_frequency(freq.mhz());
        // Set divider from XTAL to APB clock. Need to set divider to 1 (reg. value 0)
        // first.
        pcr.apb_freq_conf
            .modify(|_, w| w.apb_div_num().bits(0).apb_div_num().bits(_div - 1));

        // Switch clock source
        pcr.sysclk_conf.modify(|_, w| w.soc_clk_sel().bits(0));
    }
}

pub(crate) fn esp32c6_rtc_freq_to_pll_mhz(cpu_clock_speed: CpuClock) {
    // On ESP32C6, MSPI source clock's default HS divider leads to 120MHz, which is
    // unusable before calibration Therefore, before switching SOC_ROOT_CLK to
    // HS, we need to set MSPI source clock HS divider to make it run at
    // 80MHz after the switch. PLL = 480MHz, so divider is 6.
    clk_ll_mspi_fast_set_hs_divider(6);

    let pcr = unsafe { &*crate::peripherals::PCR::PTR };
    unsafe {
        pcr.cpu_freq_conf.modify(|_, w| {
            w.cpu_hs_div_num()
                .bits(((480 / cpu_clock_speed.mhz() / 3) - 1) as u8)
                .cpu_hs_120m_force()
                .clear_bit()
        });

        pcr.cpu_freq_conf
            .modify(|_, w| w.cpu_hs_120m_force().clear_bit());

        pcr.sysclk_conf.modify(|_, w| {
            w.soc_clk_sel().bits(1) // PLL = 1
        });
        ets_update_cpu_frequency(cpu_clock_speed.mhz());
    }
}

pub(crate) fn esp32c6_rtc_apb_freq_update(apb_freq: ApbClock) {
    let lp_aon = unsafe { &*crate::peripherals::LP_AON::ptr() };
    let value = ((apb_freq.hz() >> 12) & u16::MAX as u32)
        | (((apb_freq.hz() >> 12) & u16::MAX as u32) << 16);

    lp_aon
        .store5
        .modify(|_, w| unsafe { w.lp_aon_store5().bits(value) });
}

fn clk_ll_mspi_fast_set_hs_divider(divider: u32) {
    // SOC_ROOT_CLK ------> MSPI_FAST_CLK
    // HS divider option: 4, 5, 6 (PCR_MSPI_FAST_HS_DIV_NUM=3, 4, 5)
    let pcr = unsafe { &*crate::peripherals::PCR::PTR };

    unsafe {
        match divider {
            4 => pcr
                .mspi_clk_conf
                .modify(|_, w| w.mspi_fast_hs_div_num().bits(3)),
            5 => pcr
                .mspi_clk_conf
                .modify(|_, w| w.mspi_fast_hs_div_num().bits(4)),
            6 => pcr
                .mspi_clk_conf
                .modify(|_, w| w.mspi_fast_hs_div_num().bits(5)),
            _ => panic!("Unsupported HS MSPI_FAST divider"),
        }
    }
}

fn reg_set_bit(reg: u32, bit: u32) {
    unsafe {
        (reg as *mut u32).write_volatile((reg as *mut u32).read_volatile() | bit);
    }
}

fn reg_clr_bit(reg: u32, bit: u32) {
    unsafe {
        (reg as *mut u32).write_volatile((reg as *mut u32).read_volatile() & !bit);
    }
}

fn reg_write(reg: u32, v: u32) {
    unsafe {
        (reg as *mut u32).write_volatile(v);
    }
}

fn reg_get_bit(reg: u32, b: u32) -> u32 {
    unsafe { (reg as *mut u32).read_volatile() & b }
}

fn reg_get_field(reg: u32, s: u32, v: u32) -> u32 {
    unsafe { ((reg as *mut u32).read_volatile() >> s) & v }
}

const DR_REG_MODEM_LPCON_BASE: u32 = 0x600AF000;
const MODEM_LPCON_CLK_CONF_REG: u32 = DR_REG_MODEM_LPCON_BASE + 0x18;
const MODEM_LPCON_CLK_I2C_MST_EN: u32 = 1 << 2;
const DR_REG_LP_I2C_ANA_MST_BASE: u32 = 0x600B2400;
const LP_I2C_ANA_MST_DATE_REG: u32 = DR_REG_LP_I2C_ANA_MST_BASE + 0x3fc;
const LP_I2C_ANA_MST_I2C_MAT_CLK_EN: u32 = 1 << 28;
const REGI2C_BIAS: u8 = 0x6a;
const REGI2C_DIG_REG: u8 = 0x6d;
const REGI2C_ULP_CAL: u8 = 0x61;
const REGI2C_SAR_I2C: u8 = 0x69;

const LP_I2C_ANA_MST_DEVICE_EN_REG: u32 = DR_REG_LP_I2C_ANA_MST_BASE + 0x14;
const REGI2C_BBPLL_DEVICE_EN: u32 = 1 << 5;
const REGI2C_BIAS_DEVICE_EN: u32 = 1 << 4;
const REGI2C_DIG_REG_DEVICE_EN: u32 = 1 << 8;
const REGI2C_ULP_CAL_DEVICE_EN: u32 = 1 << 6;
const REGI2C_SAR_I2C_DEVICE_EN: u32 = 1 << 7;

const REGI2C_RTC_SLAVE_ID_V: u8 = 0xFF;
const REGI2C_RTC_SLAVE_ID_S: u8 = 0;
const REGI2C_RTC_ADDR_V: u8 = 0xFF;
const REGI2C_RTC_ADDR_S: u8 = 8;
const REGI2C_RTC_WR_CNTL_V: u8 = 0x1;
const REGI2C_RTC_WR_CNTL_S: u8 = 24;
const REGI2C_RTC_DATA_V: u8 = 0xFF;
const REGI2C_RTC_DATA_S: u8 = 16;

const LP_I2C_ANA_MST_I2C0_CTRL_REG: u32 = DR_REG_LP_I2C_ANA_MST_BASE + 0x0;
const LP_I2C_ANA_MST_I2C0_BUSY: u32 = 1 << 25;

const LP_I2C_ANA_MST_I2C0_DATA_REG: u32 = DR_REG_LP_I2C_ANA_MST_BASE + 0x8;
const LP_I2C_ANA_MST_I2C0_RDATA_V: u32 = 0x000000FF;
const LP_I2C_ANA_MST_I2C0_RDATA_S: u32 = 0;

const REGI2C_BBPLL: u8 = 0x66;

fn regi2c_enable_block(block: u8) {
    reg_set_bit(MODEM_LPCON_CLK_CONF_REG, MODEM_LPCON_CLK_I2C_MST_EN);
    reg_set_bit(LP_I2C_ANA_MST_DATE_REG, LP_I2C_ANA_MST_I2C_MAT_CLK_EN);

    // Before config I2C register, enable corresponding slave.
    match block {
        REGI2C_BBPLL => {
            reg_set_bit(LP_I2C_ANA_MST_DEVICE_EN_REG, REGI2C_BBPLL_DEVICE_EN);
        }
        REGI2C_BIAS => {
            reg_set_bit(LP_I2C_ANA_MST_DEVICE_EN_REG, REGI2C_BIAS_DEVICE_EN);
        }
        REGI2C_DIG_REG => {
            reg_set_bit(LP_I2C_ANA_MST_DEVICE_EN_REG, REGI2C_DIG_REG_DEVICE_EN);
        }
        REGI2C_ULP_CAL => {
            reg_set_bit(LP_I2C_ANA_MST_DEVICE_EN_REG, REGI2C_ULP_CAL_DEVICE_EN);
        }
        REGI2C_SAR_I2C => {
            reg_set_bit(LP_I2C_ANA_MST_DEVICE_EN_REG, REGI2C_SAR_I2C_DEVICE_EN);
        }
        _ => (),
    }
}

fn regi2c_disable_block(block: u8) {
    match block {
        REGI2C_BBPLL => {
            reg_clr_bit(LP_I2C_ANA_MST_DEVICE_EN_REG, REGI2C_BBPLL_DEVICE_EN);
        }
        REGI2C_BIAS => {
            reg_clr_bit(LP_I2C_ANA_MST_DEVICE_EN_REG, REGI2C_BIAS_DEVICE_EN);
        }
        REGI2C_DIG_REG => {
            reg_clr_bit(LP_I2C_ANA_MST_DEVICE_EN_REG, REGI2C_DIG_REG_DEVICE_EN);
        }
        REGI2C_ULP_CAL => {
            reg_clr_bit(LP_I2C_ANA_MST_DEVICE_EN_REG, REGI2C_ULP_CAL_DEVICE_EN);
        }
        REGI2C_SAR_I2C => {
            reg_clr_bit(LP_I2C_ANA_MST_DEVICE_EN_REG, REGI2C_SAR_I2C_DEVICE_EN);
        }
        _ => (),
    }
}

pub(crate) fn regi2c_write(block: u8, _host_id: u8, reg_add: u8, data: u8) {
    regi2c_enable_block(block);

    let temp: u32 = ((block as u32 & REGI2C_RTC_SLAVE_ID_V as u32) << REGI2C_RTC_SLAVE_ID_S as u32)
                    | ((reg_add as u32 & REGI2C_RTC_ADDR_V as u32) << REGI2C_RTC_ADDR_S as u32)
                    | ((0x1 & REGI2C_RTC_WR_CNTL_V as u32) << REGI2C_RTC_WR_CNTL_S as u32) // 0: READ I2C register; 1: Write I2C register;
                    | (((data as u32) & REGI2C_RTC_DATA_V as u32) << REGI2C_RTC_DATA_S as u32);
    reg_write(LP_I2C_ANA_MST_I2C0_CTRL_REG, temp);
    while reg_get_bit(LP_I2C_ANA_MST_I2C0_CTRL_REG, LP_I2C_ANA_MST_I2C0_BUSY) != 0 {}

    regi2c_disable_block(block);
}

pub(crate) fn regi2c_write_mask(block: u8, _host_id: u8, reg_add: u8, msb: u8, lsb: u8, data: u8) {
    assert!(msb - lsb < 8);
    regi2c_enable_block(block);

    // Read the i2c bus register
    let mut temp: u32 = ((block as u32 & REGI2C_RTC_SLAVE_ID_V as u32)
        << REGI2C_RTC_SLAVE_ID_S as u32)
        | (reg_add as u32 & REGI2C_RTC_ADDR_V as u32) << REGI2C_RTC_ADDR_S as u32;
    reg_write(LP_I2C_ANA_MST_I2C0_CTRL_REG, temp);
    while reg_get_bit(LP_I2C_ANA_MST_I2C0_CTRL_REG, LP_I2C_ANA_MST_I2C0_BUSY) != 0 {}
    temp = reg_get_field(
        LP_I2C_ANA_MST_I2C0_DATA_REG,
        LP_I2C_ANA_MST_I2C0_RDATA_S,
        LP_I2C_ANA_MST_I2C0_RDATA_V,
    );
    // Write the i2c bus register
    temp &= (!(0xFFFFFFFF << lsb)) | (0xFFFFFFFF << (msb + 1));
    temp =
        ((data as u32 & (!(0xFFFFFFFF << (msb as u32 - lsb as u32 + 1)))) << (lsb as u32)) | temp;
    temp = ((block as u32 & REGI2C_RTC_SLAVE_ID_V as u32) << REGI2C_RTC_SLAVE_ID_S as u32)
        | ((reg_add as u32 & REGI2C_RTC_ADDR_V as u32) << REGI2C_RTC_ADDR_S as u32)
        | ((0x1 & REGI2C_RTC_WR_CNTL_V as u32) << REGI2C_RTC_WR_CNTL_S as u32)
        | ((temp & REGI2C_RTC_DATA_V as u32) << REGI2C_RTC_DATA_S as u32);
    reg_write(LP_I2C_ANA_MST_I2C0_CTRL_REG, temp);
    while reg_get_bit(LP_I2C_ANA_MST_I2C0_CTRL_REG, LP_I2C_ANA_MST_I2C0_BUSY) != 0 {}

    regi2c_disable_block(block);
}