embassy-stm32 0.6.0

use core::future::poll_fn;
use core::marker::PhantomData;
use core::task::Poll;

use super::blocking_delay_us;
use crate::adc::{Adc, AdcChannel, Instance, SampleTime, VrefInt};
use crate::interrupt::typelevel::Interrupt;
use crate::interrupt::{self};
use crate::time::Hertz;
use crate::{Peri, rcc};

pub const VDDA_CALIB_MV: u32 = 3300;
pub const ADC_MAX: u32 = (1 << 12) - 1;
// No calibration data for F103, voltage should be 1.2v
pub const VREF_INT: u32 = 1200;

/// Interrupt handler.
pub struct InterruptHandler<T: Instance> {
    _phantom: PhantomData<T>,
}

impl<T: Instance> interrupt::typelevel::Handler<T::Interrupt> for InterruptHandler<T> {
    unsafe fn on_interrupt() {
        if T::regs().sr().read().eoc() {
            T::regs().cr1().modify(|w| w.set_eocie(false)); // End of Convert interrupt disable
            T::state().waker.wake();
        }
    }
}

impl<T: Instance> super::SealedSpecialConverter<VrefInt> for T {
    const CHANNEL: u8 = 17;
}

impl<T: Instance> super::SealedSpecialConverter<super::Temperature> for T {
    const CHANNEL: u8 = 16;
}

impl<'d, T: Instance> Adc<'d, T> {
    pub fn new(adc: Peri<'d, T>) -> Self {
        rcc::enable_and_reset::<T>();
        T::regs().cr2().modify(|reg| reg.set_adon(true));

        // 11.4: Before starting a calibration, the ADC must have been in power-on state (ADON bit = ‘1’)
        // for at least two ADC clock cycles.
        blocking_delay_us((1_000_000 * 2) / Self::freq().0 as u64 + 1);

        // Reset calibration
        T::regs().cr2().modify(|reg| reg.set_rstcal(true));
        while T::regs().cr2().read().rstcal() {
            // spin
        }

        // Calibrate
        T::regs().cr2().modify(|reg| reg.set_cal(true));
        while T::regs().cr2().read().cal() {
            // spin
        }

        // One cycle after calibration
        blocking_delay_us((1_000_000 * 1) / Self::freq().0 as u64 + 1);

        T::Interrupt::unpend();
        unsafe { T::Interrupt::enable() };

        Self { adc }
    }

    fn freq() -> Hertz {
        T::frequency()
    }

    pub fn sample_time_for_us(&self, us: u32) -> SampleTime {
        match us * Self::freq().0 / 1_000_000 {
            0..=1 => SampleTime::CYCLES1_5,
            2..=7 => SampleTime::CYCLES7_5,
            8..=13 => SampleTime::CYCLES13_5,
            14..=28 => SampleTime::CYCLES28_5,
            29..=41 => SampleTime::CYCLES41_5,
            42..=55 => SampleTime::CYCLES55_5,
            56..=71 => SampleTime::CYCLES71_5,
            _ => SampleTime::CYCLES239_5,
        }
    }

    pub fn enable_vref(&self) -> super::VrefInt {
        T::regs().cr2().modify(|reg| {
            reg.set_tsvrefe(true);
        });
        super::VrefInt {}
    }

    pub fn enable_temperature(&self) -> super::Temperature {
        T::regs().cr2().modify(|reg| {
            reg.set_tsvrefe(true);
        });
        super::Temperature {}
    }

    /// Perform a single conversion.
    async fn convert(&mut self) -> u16 {
        T::regs().cr2().modify(|reg| {
            reg.set_adon(true);
            reg.set_swstart(true);
        });
        T::regs().cr1().modify(|w| w.set_eocie(true));

        poll_fn(|cx| {
            T::state().waker.register(cx.waker());

            if !T::regs().cr2().read().swstart() && T::regs().sr().read().eoc() {
                Poll::Ready(())
            } else {
                Poll::Pending
            }
        })
        .await;

        T::regs().dr().read().0 as u16
    }

    pub async fn read(&mut self, channel: &mut impl AdcChannel<T>, sample_time: SampleTime) -> u16 {
        Self::set_channel_sample_time(channel.channel(), sample_time);
        T::regs().cr1().modify(|reg| {
            reg.set_scan(false);
            reg.set_discen(false);
        });
        T::regs().sqr1().modify(|reg| reg.set_l(0));

        T::regs().cr2().modify(|reg| {
            reg.set_cont(false);
            reg.set_exttrig(true);
            reg.set_swstart(false);
            reg.set_extsel(7); // SWSTART
        });

        // Configure the channel to sample
        T::regs().sqr3().write(|reg| reg.set_sq(0, channel.channel()));
        self.convert().await
    }

    fn set_channel_sample_time(ch: u8, sample_time: SampleTime) {
        let sample_time = sample_time.into();
        if ch <= 9 {
            T::regs().smpr2().modify(|reg| reg.set_smp(ch as _, sample_time));
        } else {
            T::regs().smpr1().modify(|reg| reg.set_smp((ch - 10) as _, sample_time));
        }
    }
}

impl<'d, T: Instance> Drop for Adc<'d, T> {
    fn drop(&mut self) {
        T::regs().cr2().modify(|reg| reg.set_adon(false));

        rcc::disable::<T>();
    }
}