embassy-nrf 0.10.0

//! Serial Peripheral Instance in master mode (SPIM) driver.

#![macro_use]

use core::future::poll_fn;
use core::marker::PhantomData;
#[cfg(feature = "_nrf52832_anomaly_109")]
use core::sync::atomic::AtomicU8;
use core::sync::atomic::{Ordering, compiler_fence};
use core::task::Poll;

use embassy_embedded_hal::SetConfig;
use embassy_hal_internal::{Peri, PeripheralType};
use embassy_sync::waitqueue::AtomicWaker;
pub use embedded_hal_02::spi::{MODE_0, MODE_1, MODE_2, MODE_3, Mode, Phase, Polarity};
pub use pac::spim::vals::Order as BitOrder;

use crate::chip::{EASY_DMA_SIZE, FORCE_COPY_BUFFER_SIZE};
use crate::gpio::{self, AnyPin, OutputDrive, Pin as GpioPin, PselBits, SealedPin as _, convert_drive};
use crate::interrupt::typelevel::Interrupt;
use crate::pac::gpio::vals as gpiovals;
use crate::pac::spim::vals;
use crate::util::slice_in_ram_or;
use crate::{interrupt, pac};

/// SPI frequencies.
#[repr(transparent)]
#[derive(Copy, Clone, Eq, PartialEq, Ord, PartialOrd)]
pub struct Frequency(u32);
impl Frequency {
    #[doc = "125 kbps"]
    pub const K125: Self = Self(0x0200_0000);
    #[doc = "250 kbps"]
    pub const K250: Self = Self(0x0400_0000);
    #[doc = "500 kbps"]
    pub const K500: Self = Self(0x0800_0000);
    #[doc = "1 Mbps"]
    pub const M1: Self = Self(0x1000_0000);
    #[doc = "2 Mbps"]
    pub const M2: Self = Self(0x2000_0000);
    #[doc = "4 Mbps"]
    pub const M4: Self = Self(0x4000_0000);
    #[doc = "8 Mbps"]
    pub const M8: Self = Self(0x8000_0000);
    #[cfg(not(feature = "_spi-v1"))]
    #[doc = "16 Mbps"]
    pub const M16: Self = Self(0x0a00_0000);
    #[cfg(not(feature = "_spi-v1"))]
    #[doc = "32 Mbps"]
    pub const M32: Self = Self(0x1400_0000);
}

impl Frequency {
    #[cfg(feature = "_nrf54l")]
    fn to_divisor(&self, clk: u32) -> u8 {
        let frequency = match *self {
            #[cfg(not(feature = "_spi-v1"))]
            Self::M32 => 32_000_000,
            #[cfg(not(feature = "_spi-v1"))]
            Self::M16 => 16_000_000,
            Self::M8 => 8_000_000,
            Self::M4 => 4_000_000,
            Self::M2 => 2_000_000,
            Self::M1 => 1_000_000,
            Self::K500 => 500_000,
            Self::K250 => 250_000,
            Self::K125 => 125_000,
            _ => unreachable!(),
        };
        let divisor = (clk / frequency) as u8;
        divisor
    }
}
impl core::fmt::Debug for Frequency {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        match self.0 {
            0x0200_0000 => f.write_str("K125"),
            0x0400_0000 => f.write_str("K250"),
            0x0800_0000 => f.write_str("K500"),
            0x0a00_0000 => f.write_str("M16"),
            0x1000_0000 => f.write_str("M1"),
            0x1400_0000 => f.write_str("M32"),
            0x2000_0000 => f.write_str("M2"),
            0x4000_0000 => f.write_str("M4"),
            0x8000_0000 => f.write_str("M8"),
            other => core::write!(f, "0x{:02X}", other),
        }
    }
}

#[cfg(feature = "defmt")]
impl defmt::Format for Frequency {
    fn format(&self, f: defmt::Formatter) {
        match self.0 {
            0x0200_0000 => defmt::write!(f, "K125"),
            0x0400_0000 => defmt::write!(f, "K250"),
            0x0800_0000 => defmt::write!(f, "K500"),
            0x0a00_0000 => defmt::write!(f, "M16"),
            0x1000_0000 => defmt::write!(f, "M1"),
            0x1400_0000 => defmt::write!(f, "M32"),
            0x2000_0000 => defmt::write!(f, "M2"),
            0x4000_0000 => defmt::write!(f, "M4"),
            0x8000_0000 => defmt::write!(f, "M8"),
            other => defmt::write!(f, "0x{:02X}", other),
        }
    }
}

#[cfg(not(feature = "_nrf54l"))]
impl Into<pac::spim::vals::Frequency> for Frequency {
    fn into(self) -> pac::spim::vals::Frequency {
        use pac::spim::vals::Frequency as Freq;
        match self {
            #[cfg(not(feature = "_spi-v1"))]
            Self::M32 => Freq::M32,
            #[cfg(not(feature = "_spi-v1"))]
            Self::M16 => Freq::M16,
            Self::M8 => Freq::M8,
            Self::M4 => Freq::M4,
            Self::M2 => Freq::M2,
            Self::M1 => Freq::M1,
            Self::K500 => Freq::K500,
            Self::K250 => Freq::K250,
            Self::K125 => Freq::K125,
            _ => unreachable!(),
        }
    }
}

/// SPIM error
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[non_exhaustive]
pub enum Error {
    /// EasyDMA can only read from data memory, read only buffers in flash will fail.
    BufferNotInRAM,
}

/// SPIM configuration.
#[non_exhaustive]
#[derive(Clone)]
pub struct Config {
    /// Frequency
    pub frequency: Frequency,

    /// SPI mode
    pub mode: Mode,

    /// Bit order
    pub bit_order: BitOrder,

    /// Overread character.
    ///
    /// When doing bidirectional transfers, if the TX buffer is shorter than the RX buffer,
    /// this byte will be transmitted in the MOSI line for the left-over bytes.
    pub orc: u8,

    /// Drive strength for the SCK line.
    pub sck_drive: OutputDrive,

    /// Drive strength for the MOSI line.
    pub mosi_drive: OutputDrive,
}

impl Default for Config {
    fn default() -> Self {
        Self {
            frequency: Frequency::M1,
            mode: MODE_0,
            bit_order: BitOrder::MSB_FIRST,
            orc: 0x00,
            sck_drive: OutputDrive::HighDrive,
            mosi_drive: OutputDrive::HighDrive,
        }
    }
}

/// Interrupt handler.
pub struct InterruptHandler<T: Instance> {
    _phantom: PhantomData<T>,
}

impl<T: Instance> interrupt::typelevel::Handler<T::Interrupt> for InterruptHandler<T> {
    unsafe fn on_interrupt() {
        let r = T::regs();
        let s = T::state();

        #[cfg(feature = "_nrf52832_anomaly_109")]
        {
            // Ideally we should call this only during the first chunk transfer,
            // but so far calling this every time doesn't seem to be causing any issues.
            if r.events_started().read() != 0 {
                s.waker.wake();
                r.intenclr().write(|w| w.set_started(true));
            }
        }

        if r.events_end().read() != 0 {
            s.waker.wake();
            r.intenclr().write(|w| w.set_end(true));
        }
    }
}

/// SPIM driver.
pub struct Spim<'d> {
    r: pac::spim::Spim,
    irq: interrupt::Interrupt,
    state: &'static State,
    #[cfg(feature = "_nrf54l")]
    clk: u32,
    _p: PhantomData<&'d ()>,
}

impl<'d> Spim<'d> {
    /// Create a new SPIM driver.
    pub fn new<T: Instance>(
        spim: Peri<'d, T>,
        _irq: impl interrupt::typelevel::Binding<T::Interrupt, InterruptHandler<T>> + 'd,
        sck: Peri<'d, impl GpioPin>,
        miso: Peri<'d, impl GpioPin>,
        mosi: Peri<'d, impl GpioPin>,
        config: Config,
    ) -> Self {
        Self::new_inner(spim, Some(sck.into()), Some(miso.into()), Some(mosi.into()), config)
    }

    /// Create a new SPIM driver, capable of TX only (MOSI only).
    pub fn new_txonly<T: Instance>(
        spim: Peri<'d, T>,
        _irq: impl interrupt::typelevel::Binding<T::Interrupt, InterruptHandler<T>> + 'd,
        sck: Peri<'d, impl GpioPin>,
        mosi: Peri<'d, impl GpioPin>,
        config: Config,
    ) -> Self {
        Self::new_inner(spim, Some(sck.into()), None, Some(mosi.into()), config)
    }

    /// Create a new SPIM driver, capable of RX only (MISO only).
    pub fn new_rxonly<T: Instance>(
        spim: Peri<'d, T>,
        _irq: impl interrupt::typelevel::Binding<T::Interrupt, InterruptHandler<T>> + 'd,
        sck: Peri<'d, impl GpioPin>,
        miso: Peri<'d, impl GpioPin>,
        config: Config,
    ) -> Self {
        Self::new_inner(spim, Some(sck.into()), Some(miso.into()), None, config)
    }

    /// Create a new SPIM driver, capable of TX only (MOSI only), without SCK pin.
    pub fn new_txonly_nosck<T: Instance>(
        spim: Peri<'d, T>,
        _irq: impl interrupt::typelevel::Binding<T::Interrupt, InterruptHandler<T>> + 'd,
        mosi: Peri<'d, impl GpioPin>,
        config: Config,
    ) -> Self {
        Self::new_inner(spim, None, None, Some(mosi.into()), config)
    }

    fn new_inner<T: Instance>(
        _spim: Peri<'d, T>,
        sck: Option<Peri<'d, AnyPin>>,
        miso: Option<Peri<'d, AnyPin>>,
        mosi: Option<Peri<'d, AnyPin>>,
        config: Config,
    ) -> Self {
        let r = T::regs();

        // Configure pins
        if let Some(sck) = &sck {
            sck.conf().write(|w| {
                w.set_dir(gpiovals::Dir::OUTPUT);
                convert_drive(w, config.sck_drive);
            });
        }
        if let Some(mosi) = &mosi {
            mosi.conf().write(|w| {
                w.set_dir(gpiovals::Dir::OUTPUT);
                convert_drive(w, config.mosi_drive);
            });
        }
        if let Some(miso) = &miso {
            miso.conf().write(|w| w.set_input(gpiovals::Input::CONNECT));
        }

        match config.mode.polarity {
            Polarity::IdleHigh => {
                if let Some(sck) = &sck {
                    sck.set_high();
                }
                if let Some(mosi) = &mosi {
                    mosi.set_high();
                }
            }
            Polarity::IdleLow => {
                if let Some(sck) = &sck {
                    sck.set_low();
                }
                if let Some(mosi) = &mosi {
                    mosi.set_low();
                }
            }
        }

        // Select pins.
        r.psel().sck().write_value(sck.psel_bits());
        r.psel().mosi().write_value(mosi.psel_bits());
        r.psel().miso().write_value(miso.psel_bits());

        // Enable SPIM instance.
        r.enable().write(|w| w.set_enable(vals::Enable::ENABLED));

        let mut spim = Self {
            r: T::regs(),
            irq: T::Interrupt::IRQ,
            state: T::state(),
            #[cfg(feature = "_nrf54l")]
            clk: T::clk(),
            _p: PhantomData {},
        };

        // Apply runtime peripheral configuration
        Self::set_config(&mut spim, &config).unwrap();

        // Disable all events interrupts
        r.intenclr().write(|w| w.0 = 0xFFFF_FFFF);

        T::Interrupt::unpend();
        unsafe { T::Interrupt::enable() };

        spim
    }

    fn prepare_dma_transfer(&mut self, rx: *mut [u8], tx: *const [u8], offset: usize, length: usize) {
        compiler_fence(Ordering::SeqCst);

        let r = self.r;

        fn xfer_params(ptr: u32, total: usize, offset: usize, length: usize) -> (u32, usize) {
            if total > offset {
                (ptr.wrapping_add(offset as _), core::cmp::min(total - offset, length))
            } else {
                (ptr, 0)
            }
        }

        // Set up the DMA read.
        let (rx_ptr, rx_len) = xfer_params(rx as *mut u8 as _, rx.len() as _, offset, length);
        r.dma().rx().ptr().write_value(rx_ptr);
        r.dma().rx().maxcnt().write(|w| w.set_maxcnt(rx_len as _));

        // Set up the DMA write.
        let (tx_ptr, tx_len) = xfer_params(tx as *const u8 as _, tx.len() as _, offset, length);
        r.dma().tx().ptr().write_value(tx_ptr);
        r.dma().tx().maxcnt().write(|w| w.set_maxcnt(tx_len as _));

        /*
        trace!("XFER: offset: {}, length: {}", offset, length);
        trace!("RX(len: {}, ptr: {=u32:02x})", rx_len, rx_ptr as u32);
        trace!("TX(len: {}, ptr: {=u32:02x})", tx_len, tx_ptr as u32);
        */

        #[cfg(feature = "_nrf52832_anomaly_109")]
        if offset == 0 {
            let s = self.state;

            r.events_started().write_value(0);

            // Set rx/tx buffer lengths to 0...
            r.dma().tx().maxcnt().write(|_| ());
            r.dma().rx().maxcnt().write(|_| ());

            // ...and keep track of original buffer lengths...
            s.tx.store(tx_len as _, Ordering::Relaxed);
            s.rx.store(rx_len as _, Ordering::Relaxed);

            // ...signalling the start of the fake transfer.
            r.intenset().write(|w| w.set_started(true));
        }

        // Reset and enable the event
        r.events_end().write_value(0);
        r.intenset().write(|w| w.set_end(true));

        // Start SPI transaction.
        r.tasks_start().write_value(1);
    }

    fn blocking_inner_from_ram_chunk(&mut self, rx: *mut [u8], tx: *const [u8], offset: usize, length: usize) {
        self.prepare_dma_transfer(rx, tx, offset, length);

        #[cfg(feature = "_nrf52832_anomaly_109")]
        if offset == 0 {
            while self.nrf52832_dma_workaround_status().is_pending() {}
        }

        // Wait for 'end' event.
        while self.r.events_end().read() == 0 {}

        compiler_fence(Ordering::SeqCst);
    }

    fn blocking_inner_from_ram(&mut self, rx: *mut [u8], tx: *const [u8]) -> Result<(), Error> {
        slice_in_ram_or(tx, Error::BufferNotInRAM)?;
        // NOTE: RAM slice check for rx is not necessary, as a mutable
        // slice can only be built from data located in RAM.

        let xfer_len = core::cmp::max(rx.len(), tx.len());
        for offset in (0..xfer_len).step_by(EASY_DMA_SIZE) {
            let length = core::cmp::min(xfer_len - offset, EASY_DMA_SIZE);
            self.blocking_inner_from_ram_chunk(rx, tx, offset, length);
        }
        Ok(())
    }

    fn blocking_inner(&mut self, rx: &mut [u8], tx: &[u8]) -> Result<(), Error> {
        match self.blocking_inner_from_ram(rx, tx) {
            Ok(_) => Ok(()),
            Err(Error::BufferNotInRAM) => {
                // trace!("Copying SPIM tx buffer into RAM for DMA");
                let tx_ram_buf = &mut [0; FORCE_COPY_BUFFER_SIZE][..tx.len()];
                tx_ram_buf.copy_from_slice(tx);
                self.blocking_inner_from_ram(rx, tx_ram_buf)
            }
        }
    }

    async fn async_inner_from_ram_chunk(&mut self, rx: *mut [u8], tx: *const [u8], offset: usize, length: usize) {
        self.prepare_dma_transfer(rx, tx, offset, length);

        #[cfg(feature = "_nrf52832_anomaly_109")]
        if offset == 0 {
            poll_fn(|cx| {
                let s = self.state;

                s.waker.register(cx.waker());

                self.nrf52832_dma_workaround_status()
            })
            .await;
        }

        // Wait for 'end' event.
        poll_fn(|cx| {
            self.state.waker.register(cx.waker());
            if self.r.events_end().read() != 0 {
                return Poll::Ready(());
            }

            Poll::Pending
        })
        .await;

        compiler_fence(Ordering::SeqCst);
    }

    async fn async_inner_from_ram(&mut self, rx: *mut [u8], tx: *const [u8]) -> Result<(), Error> {
        slice_in_ram_or(tx, Error::BufferNotInRAM)?;
        // NOTE: RAM slice check for rx is not necessary, as a mutable
        // slice can only be built from data located in RAM.

        let xfer_len = core::cmp::max(rx.len(), tx.len());
        for offset in (0..xfer_len).step_by(EASY_DMA_SIZE) {
            let length = core::cmp::min(xfer_len - offset, EASY_DMA_SIZE);
            self.async_inner_from_ram_chunk(rx, tx, offset, length).await;
        }
        Ok(())
    }

    async fn async_inner(&mut self, rx: &mut [u8], tx: &[u8]) -> Result<(), Error> {
        match self.async_inner_from_ram(rx, tx).await {
            Ok(_) => Ok(()),
            Err(Error::BufferNotInRAM) => {
                // trace!("Copying SPIM tx buffer into RAM for DMA");
                let tx_ram_buf = &mut [0; FORCE_COPY_BUFFER_SIZE][..tx.len()];
                tx_ram_buf.copy_from_slice(tx);
                self.async_inner_from_ram(rx, tx_ram_buf).await
            }
        }
    }

    /// Reads data from the SPI bus without sending anything. Blocks until the buffer has been filled.
    pub fn blocking_read(&mut self, data: &mut [u8]) -> Result<(), Error> {
        self.blocking_inner(data, &[])
    }

    /// Simultaneously sends and receives data. Blocks until the transmission is completed.
    /// If necessary, the write buffer will be copied into RAM (see struct description for detail).
    pub fn blocking_transfer(&mut self, read: &mut [u8], write: &[u8]) -> Result<(), Error> {
        self.blocking_inner(read, write)
    }

    /// Same as [`blocking_transfer`](Spim::blocking_transfer) but will fail instead of copying data into RAM. Consult the module level documentation to learn more.
    pub fn blocking_transfer_from_ram(&mut self, read: &mut [u8], write: &[u8]) -> Result<(), Error> {
        self.blocking_inner(read, write)
    }

    /// Simultaneously sends and receives data.
    /// Places the received data into the same buffer and blocks until the transmission is completed.
    pub fn blocking_transfer_in_place(&mut self, data: &mut [u8]) -> Result<(), Error> {
        self.blocking_inner_from_ram(data, data)
    }

    /// Sends data, discarding any received data. Blocks  until the transmission is completed.
    /// If necessary, the write buffer will be copied into RAM (see struct description for detail).
    pub fn blocking_write(&mut self, data: &[u8]) -> Result<(), Error> {
        self.blocking_inner(&mut [], data)
    }

    /// Same as [`blocking_write`](Spim::blocking_write) but will fail instead of copying data into RAM. Consult the module level documentation to learn more.
    pub fn blocking_write_from_ram(&mut self, data: &[u8]) -> Result<(), Error> {
        self.blocking_inner(&mut [], data)
    }

    /// Reads data from the SPI bus without sending anything.
    pub async fn read(&mut self, data: &mut [u8]) -> Result<(), Error> {
        self.async_inner(data, &[]).await
    }

    /// Simultaneously sends and receives data.
    /// If necessary, the write buffer will be copied into RAM (see struct description for detail).
    pub async fn transfer(&mut self, read: &mut [u8], write: &[u8]) -> Result<(), Error> {
        self.async_inner(read, write).await
    }

    /// Same as [`transfer`](Spim::transfer) but will fail instead of copying data into RAM. Consult the module level documentation to learn more.
    pub async fn transfer_from_ram(&mut self, read: &mut [u8], write: &[u8]) -> Result<(), Error> {
        self.async_inner_from_ram(read, write).await
    }

    /// Simultaneously sends and receives data. Places the received data into the same buffer.
    pub async fn transfer_in_place(&mut self, data: &mut [u8]) -> Result<(), Error> {
        self.async_inner_from_ram(data, data).await
    }

    /// Sends data, discarding any received data.
    /// If necessary, the write buffer will be copied into RAM (see struct description for detail).
    pub async fn write(&mut self, data: &[u8]) -> Result<(), Error> {
        self.async_inner(&mut [], data).await
    }

    /// Same as [`write`](Spim::write) but will fail instead of copying data into RAM. Consult the module level documentation to learn more.
    pub async fn write_from_ram(&mut self, data: &[u8]) -> Result<(), Error> {
        self.async_inner_from_ram(&mut [], data).await
    }

    #[cfg(feature = "_nrf52832_anomaly_109")]
    fn nrf52832_dma_workaround_status(&mut self) -> Poll<()> {
        let r = self.r;
        if r.events_started().read() != 0 {
            let s = self.state;

            // Handle the first "fake" transmission
            r.events_started().write_value(0);
            r.events_end().write_value(0);

            // Update DMA registers with correct rx/tx buffer sizes
            r.dma()
                .rx()
                .maxcnt()
                .write(|w| w.set_maxcnt(s.rx.load(Ordering::Relaxed)));
            r.dma()
                .tx()
                .maxcnt()
                .write(|w| w.set_maxcnt(s.tx.load(Ordering::Relaxed)));

            r.intenset().write(|w| w.set_end(true));
            // ... and start actual, hopefully glitch-free transmission
            r.tasks_start().write_value(1);
            return Poll::Ready(());
        }
        Poll::Pending
    }
}

impl<'d> Drop for Spim<'d> {
    fn drop(&mut self) {
        trace!("spim drop");

        // TODO check for abort, wait for xxxstopped

        // disable!
        let r = self.r;
        r.enable().write(|w| w.set_enable(vals::Enable::DISABLED));

        gpio::deconfigure_pin(r.psel().sck().read());
        gpio::deconfigure_pin(r.psel().miso().read());
        gpio::deconfigure_pin(r.psel().mosi().read());

        // Disable all events interrupts
        cortex_m::peripheral::NVIC::mask(self.irq);

        trace!("spim drop: done");
    }
}

pub(crate) struct State {
    waker: AtomicWaker,
    #[cfg(feature = "_nrf52832_anomaly_109")]
    rx: AtomicU8,
    #[cfg(feature = "_nrf52832_anomaly_109")]
    tx: AtomicU8,
}

impl State {
    pub(crate) const fn new() -> Self {
        Self {
            waker: AtomicWaker::new(),
            #[cfg(feature = "_nrf52832_anomaly_109")]
            rx: AtomicU8::new(0),
            #[cfg(feature = "_nrf52832_anomaly_109")]
            tx: AtomicU8::new(0),
        }
    }
}

pub(crate) trait SealedInstance {
    fn regs() -> pac::spim::Spim;
    fn state() -> &'static State;
    #[cfg(feature = "_nrf54l")]
    fn clk() -> u32;
}

/// SPIM peripheral instance
#[allow(private_bounds)]
pub trait Instance: SealedInstance + PeripheralType + 'static {
    /// Interrupt for this peripheral.
    type Interrupt: interrupt::typelevel::Interrupt;
}

#[cfg(feature = "_nrf54l")]
macro_rules! impl_spim {
    ($type:ident, $pac_type:ident, $irq:ident, $clk:expr) => {
        impl crate::spim::SealedInstance for peripherals::$type {
            fn regs() -> pac::spim::Spim {
                pac::$pac_type
            }
            fn state() -> &'static crate::spim::State {
                static STATE: crate::spim::State = crate::spim::State::new();
                &STATE
            }
            fn clk() -> u32 {
                $clk
            }
        }
        impl crate::spim::Instance for peripherals::$type {
            type Interrupt = crate::interrupt::typelevel::$irq;
        }
    };
}

#[cfg(not(feature = "_nrf54l"))]
macro_rules! impl_spim {
    ($type:ident, $pac_type:ident, $irq:ident) => {
        impl crate::spim::SealedInstance for peripherals::$type {
            fn regs() -> pac::spim::Spim {
                pac::$pac_type
            }
            fn state() -> &'static crate::spim::State {
                static STATE: crate::spim::State = crate::spim::State::new();
                &STATE
            }
        }
        impl crate::spim::Instance for peripherals::$type {
            type Interrupt = crate::interrupt::typelevel::$irq;
        }
    };
}

// ====================

mod eh02 {
    use super::*;

    impl<'d> embedded_hal_02::blocking::spi::Transfer<u8> for Spim<'d> {
        type Error = Error;
        fn transfer<'w>(&mut self, words: &'w mut [u8]) -> Result<&'w [u8], Self::Error> {
            self.blocking_transfer_in_place(words)?;
            Ok(words)
        }
    }

    impl<'d> embedded_hal_02::blocking::spi::Write<u8> for Spim<'d> {
        type Error = Error;

        fn write(&mut self, words: &[u8]) -> Result<(), Self::Error> {
            self.blocking_write(words)
        }
    }
}

impl embedded_hal_1::spi::Error for Error {
    fn kind(&self) -> embedded_hal_1::spi::ErrorKind {
        match *self {
            Self::BufferNotInRAM => embedded_hal_1::spi::ErrorKind::Other,
        }
    }
}

impl<'d> embedded_hal_1::spi::ErrorType for Spim<'d> {
    type Error = Error;
}

impl<'d> embedded_hal_1::spi::SpiBus<u8> for Spim<'d> {
    fn flush(&mut self) -> Result<(), Self::Error> {
        Ok(())
    }

    fn read(&mut self, words: &mut [u8]) -> Result<(), Self::Error> {
        self.blocking_transfer(words, &[])
    }

    fn write(&mut self, words: &[u8]) -> Result<(), Self::Error> {
        self.blocking_write(words)
    }

    fn transfer(&mut self, read: &mut [u8], write: &[u8]) -> Result<(), Self::Error> {
        self.blocking_transfer(read, write)
    }

    fn transfer_in_place(&mut self, words: &mut [u8]) -> Result<(), Self::Error> {
        self.blocking_transfer_in_place(words)
    }
}

impl<'d> embedded_hal_async::spi::SpiBus<u8> for Spim<'d> {
    async fn flush(&mut self) -> Result<(), Error> {
        Ok(())
    }

    async fn read(&mut self, words: &mut [u8]) -> Result<(), Error> {
        self.read(words).await
    }

    async fn write(&mut self, data: &[u8]) -> Result<(), Error> {
        self.write(data).await
    }

    async fn transfer(&mut self, rx: &mut [u8], tx: &[u8]) -> Result<(), Error> {
        self.transfer(rx, tx).await
    }

    async fn transfer_in_place(&mut self, words: &mut [u8]) -> Result<(), Error> {
        self.transfer_in_place(words).await
    }
}

impl<'d> SetConfig for Spim<'d> {
    type Config = Config;
    type ConfigError = ();
    fn set_config(&mut self, config: &Self::Config) -> Result<(), Self::ConfigError> {
        let r = self.r;
        // Configure mode.
        let mode = config.mode;
        r.config().write(|w| {
            w.set_order(config.bit_order);
            match mode {
                MODE_0 => {
                    w.set_cpol(vals::Cpol::ACTIVE_HIGH);
                    w.set_cpha(vals::Cpha::LEADING);
                }
                MODE_1 => {
                    w.set_cpol(vals::Cpol::ACTIVE_HIGH);
                    w.set_cpha(vals::Cpha::TRAILING);
                }
                MODE_2 => {
                    w.set_cpol(vals::Cpol::ACTIVE_LOW);
                    w.set_cpha(vals::Cpha::LEADING);
                }
                MODE_3 => {
                    w.set_cpol(vals::Cpol::ACTIVE_LOW);
                    w.set_cpha(vals::Cpha::TRAILING);
                }
            }
        });

        // Configure frequency.
        let frequency = config.frequency;
        #[cfg(not(feature = "_nrf54l"))]
        r.frequency().write(|w| w.set_frequency(frequency.into()));
        #[cfg(feature = "_nrf54l")]
        {
            r.prescaler().write(|w| w.set_divisor(frequency.to_divisor(self.clk)));
        }

        // Set over-read character
        let orc = config.orc;
        r.orc().write(|w| w.set_orc(orc));

        Ok(())
    }
}