#[doc = "Register `PA_MODEL` reader"]
pub struct R(crate::R<PA_MODEL_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<PA_MODEL_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<PA_MODEL_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<PA_MODEL_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `PA_MODEL` writer"]
pub struct W(crate::W<PA_MODEL_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<PA_MODEL_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<PA_MODEL_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<PA_MODEL_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Pin 0 Mode\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum MODE0_A {
#[doc = "0: Input disabled. Pullup if DOUT is set."]
DISABLED = 0,
#[doc = "1: Input enabled. Filter if DOUT is set"]
INPUT = 1,
#[doc = "2: Input enabled. DOUT determines pull direction"]
INPUTPULL = 2,
#[doc = "3: Input enabled with filter. DOUT determines pull direction"]
INPUTPULLFILTER = 3,
#[doc = "4: Push-pull output"]
PUSHPULL = 4,
#[doc = "5: Push-pull output with drive-strength set by DRIVEMODE"]
PUSHPULLDRIVE = 5,
#[doc = "6: Wired-or output"]
WIREDOR = 6,
#[doc = "7: Wired-or output with pull-down"]
WIREDORPULLDOWN = 7,
#[doc = "8: Open-drain output"]
WIREDAND = 8,
#[doc = "9: Open-drain output with filter"]
WIREDANDFILTER = 9,
#[doc = "10: Open-drain output with pullup"]
WIREDANDPULLUP = 10,
#[doc = "11: Open-drain output with filter and pullup"]
WIREDANDPULLUPFILTER = 11,
#[doc = "12: Open-drain output with drive-strength set by DRIVEMODE"]
WIREDANDDRIVE = 12,
#[doc = "13: Open-drain output with filter and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEFILTER = 13,
#[doc = "14: Open-drain output with pullup and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEPULLUP = 14,
#[doc = "15: Open-drain output with filter, pullup and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEPULLUPFILTER = 15,
}
impl From<MODE0_A> for u8 {
#[inline(always)]
fn from(variant: MODE0_A) -> Self {
variant as _
}
}
#[doc = "Field `MODE0` reader - Pin 0 Mode"]
pub type MODE0_R = crate::FieldReader<u8, MODE0_A>;
impl MODE0_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> MODE0_A {
match self.bits {
0 => MODE0_A::DISABLED,
1 => MODE0_A::INPUT,
2 => MODE0_A::INPUTPULL,
3 => MODE0_A::INPUTPULLFILTER,
4 => MODE0_A::PUSHPULL,
5 => MODE0_A::PUSHPULLDRIVE,
6 => MODE0_A::WIREDOR,
7 => MODE0_A::WIREDORPULLDOWN,
8 => MODE0_A::WIREDAND,
9 => MODE0_A::WIREDANDFILTER,
10 => MODE0_A::WIREDANDPULLUP,
11 => MODE0_A::WIREDANDPULLUPFILTER,
12 => MODE0_A::WIREDANDDRIVE,
13 => MODE0_A::WIREDANDDRIVEFILTER,
14 => MODE0_A::WIREDANDDRIVEPULLUP,
15 => MODE0_A::WIREDANDDRIVEPULLUPFILTER,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `DISABLED`"]
#[inline(always)]
pub fn is_disabled(&self) -> bool {
*self == MODE0_A::DISABLED
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == MODE0_A::INPUT
}
#[doc = "Checks if the value of the field is `INPUTPULL`"]
#[inline(always)]
pub fn is_inputpull(&self) -> bool {
*self == MODE0_A::INPUTPULL
}
#[doc = "Checks if the value of the field is `INPUTPULLFILTER`"]
#[inline(always)]
pub fn is_inputpullfilter(&self) -> bool {
*self == MODE0_A::INPUTPULLFILTER
}
#[doc = "Checks if the value of the field is `PUSHPULL`"]
#[inline(always)]
pub fn is_pushpull(&self) -> bool {
*self == MODE0_A::PUSHPULL
}
#[doc = "Checks if the value of the field is `PUSHPULLDRIVE`"]
#[inline(always)]
pub fn is_pushpulldrive(&self) -> bool {
*self == MODE0_A::PUSHPULLDRIVE
}
#[doc = "Checks if the value of the field is `WIREDOR`"]
#[inline(always)]
pub fn is_wiredor(&self) -> bool {
*self == MODE0_A::WIREDOR
}
#[doc = "Checks if the value of the field is `WIREDORPULLDOWN`"]
#[inline(always)]
pub fn is_wiredorpulldown(&self) -> bool {
*self == MODE0_A::WIREDORPULLDOWN
}
#[doc = "Checks if the value of the field is `WIREDAND`"]
#[inline(always)]
pub fn is_wiredand(&self) -> bool {
*self == MODE0_A::WIREDAND
}
#[doc = "Checks if the value of the field is `WIREDANDFILTER`"]
#[inline(always)]
pub fn is_wiredandfilter(&self) -> bool {
*self == MODE0_A::WIREDANDFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUP`"]
#[inline(always)]
pub fn is_wiredandpullup(&self) -> bool {
*self == MODE0_A::WIREDANDPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredandpullupfilter(&self) -> bool {
*self == MODE0_A::WIREDANDPULLUPFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVE`"]
#[inline(always)]
pub fn is_wiredanddrive(&self) -> bool {
*self == MODE0_A::WIREDANDDRIVE
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEFILTER`"]
#[inline(always)]
pub fn is_wiredanddrivefilter(&self) -> bool {
*self == MODE0_A::WIREDANDDRIVEFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEPULLUP`"]
#[inline(always)]
pub fn is_wiredanddrivepullup(&self) -> bool {
*self == MODE0_A::WIREDANDDRIVEPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredanddrivepullupfilter(&self) -> bool {
*self == MODE0_A::WIREDANDDRIVEPULLUPFILTER
}
}
#[doc = "Field `MODE0` writer - Pin 0 Mode"]
pub type MODE0_W<'a> = crate::FieldWriterSafe<'a, u32, PA_MODEL_SPEC, u8, MODE0_A, 4, 0>;
impl<'a> MODE0_W<'a> {
#[doc = "Input disabled. Pullup if DOUT is set."]
#[inline(always)]
pub fn disabled(self) -> &'a mut W {
self.variant(MODE0_A::DISABLED)
}
#[doc = "Input enabled. Filter if DOUT is set"]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(MODE0_A::INPUT)
}
#[doc = "Input enabled. DOUT determines pull direction"]
#[inline(always)]
pub fn inputpull(self) -> &'a mut W {
self.variant(MODE0_A::INPUTPULL)
}
#[doc = "Input enabled with filter. DOUT determines pull direction"]
#[inline(always)]
pub fn inputpullfilter(self) -> &'a mut W {
self.variant(MODE0_A::INPUTPULLFILTER)
}
#[doc = "Push-pull output"]
#[inline(always)]
pub fn pushpull(self) -> &'a mut W {
self.variant(MODE0_A::PUSHPULL)
}
#[doc = "Push-pull output with drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn pushpulldrive(self) -> &'a mut W {
self.variant(MODE0_A::PUSHPULLDRIVE)
}
#[doc = "Wired-or output"]
#[inline(always)]
pub fn wiredor(self) -> &'a mut W {
self.variant(MODE0_A::WIREDOR)
}
#[doc = "Wired-or output with pull-down"]
#[inline(always)]
pub fn wiredorpulldown(self) -> &'a mut W {
self.variant(MODE0_A::WIREDORPULLDOWN)
}
#[doc = "Open-drain output"]
#[inline(always)]
pub fn wiredand(self) -> &'a mut W {
self.variant(MODE0_A::WIREDAND)
}
#[doc = "Open-drain output with filter"]
#[inline(always)]
pub fn wiredandfilter(self) -> &'a mut W {
self.variant(MODE0_A::WIREDANDFILTER)
}
#[doc = "Open-drain output with pullup"]
#[inline(always)]
pub fn wiredandpullup(self) -> &'a mut W {
self.variant(MODE0_A::WIREDANDPULLUP)
}
#[doc = "Open-drain output with filter and pullup"]
#[inline(always)]
pub fn wiredandpullupfilter(self) -> &'a mut W {
self.variant(MODE0_A::WIREDANDPULLUPFILTER)
}
#[doc = "Open-drain output with drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrive(self) -> &'a mut W {
self.variant(MODE0_A::WIREDANDDRIVE)
}
#[doc = "Open-drain output with filter and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivefilter(self) -> &'a mut W {
self.variant(MODE0_A::WIREDANDDRIVEFILTER)
}
#[doc = "Open-drain output with pullup and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivepullup(self) -> &'a mut W {
self.variant(MODE0_A::WIREDANDDRIVEPULLUP)
}
#[doc = "Open-drain output with filter, pullup and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivepullupfilter(self) -> &'a mut W {
self.variant(MODE0_A::WIREDANDDRIVEPULLUPFILTER)
}
}
#[doc = "Pin 1 Mode\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum MODE1_A {
#[doc = "0: Input disabled. Pullup if DOUT is set."]
DISABLED = 0,
#[doc = "1: Input enabled. Filter if DOUT is set"]
INPUT = 1,
#[doc = "2: Input enabled. DOUT determines pull direction"]
INPUTPULL = 2,
#[doc = "3: Input enabled with filter. DOUT determines pull direction"]
INPUTPULLFILTER = 3,
#[doc = "4: Push-pull output"]
PUSHPULL = 4,
#[doc = "5: Push-pull output with drive-strength set by DRIVEMODE"]
PUSHPULLDRIVE = 5,
#[doc = "6: Wired-or output"]
WIREDOR = 6,
#[doc = "7: Wired-or output with pull-down"]
WIREDORPULLDOWN = 7,
#[doc = "8: Open-drain output"]
WIREDAND = 8,
#[doc = "9: Open-drain output with filter"]
WIREDANDFILTER = 9,
#[doc = "10: Open-drain output with pullup"]
WIREDANDPULLUP = 10,
#[doc = "11: Open-drain output with filter and pullup"]
WIREDANDPULLUPFILTER = 11,
#[doc = "12: Open-drain output with drive-strength set by DRIVEMODE"]
WIREDANDDRIVE = 12,
#[doc = "13: Open-drain output with filter and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEFILTER = 13,
#[doc = "14: Open-drain output with pullup and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEPULLUP = 14,
#[doc = "15: Open-drain output with filter, pullup and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEPULLUPFILTER = 15,
}
impl From<MODE1_A> for u8 {
#[inline(always)]
fn from(variant: MODE1_A) -> Self {
variant as _
}
}
#[doc = "Field `MODE1` reader - Pin 1 Mode"]
pub type MODE1_R = crate::FieldReader<u8, MODE1_A>;
impl MODE1_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> MODE1_A {
match self.bits {
0 => MODE1_A::DISABLED,
1 => MODE1_A::INPUT,
2 => MODE1_A::INPUTPULL,
3 => MODE1_A::INPUTPULLFILTER,
4 => MODE1_A::PUSHPULL,
5 => MODE1_A::PUSHPULLDRIVE,
6 => MODE1_A::WIREDOR,
7 => MODE1_A::WIREDORPULLDOWN,
8 => MODE1_A::WIREDAND,
9 => MODE1_A::WIREDANDFILTER,
10 => MODE1_A::WIREDANDPULLUP,
11 => MODE1_A::WIREDANDPULLUPFILTER,
12 => MODE1_A::WIREDANDDRIVE,
13 => MODE1_A::WIREDANDDRIVEFILTER,
14 => MODE1_A::WIREDANDDRIVEPULLUP,
15 => MODE1_A::WIREDANDDRIVEPULLUPFILTER,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `DISABLED`"]
#[inline(always)]
pub fn is_disabled(&self) -> bool {
*self == MODE1_A::DISABLED
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == MODE1_A::INPUT
}
#[doc = "Checks if the value of the field is `INPUTPULL`"]
#[inline(always)]
pub fn is_inputpull(&self) -> bool {
*self == MODE1_A::INPUTPULL
}
#[doc = "Checks if the value of the field is `INPUTPULLFILTER`"]
#[inline(always)]
pub fn is_inputpullfilter(&self) -> bool {
*self == MODE1_A::INPUTPULLFILTER
}
#[doc = "Checks if the value of the field is `PUSHPULL`"]
#[inline(always)]
pub fn is_pushpull(&self) -> bool {
*self == MODE1_A::PUSHPULL
}
#[doc = "Checks if the value of the field is `PUSHPULLDRIVE`"]
#[inline(always)]
pub fn is_pushpulldrive(&self) -> bool {
*self == MODE1_A::PUSHPULLDRIVE
}
#[doc = "Checks if the value of the field is `WIREDOR`"]
#[inline(always)]
pub fn is_wiredor(&self) -> bool {
*self == MODE1_A::WIREDOR
}
#[doc = "Checks if the value of the field is `WIREDORPULLDOWN`"]
#[inline(always)]
pub fn is_wiredorpulldown(&self) -> bool {
*self == MODE1_A::WIREDORPULLDOWN
}
#[doc = "Checks if the value of the field is `WIREDAND`"]
#[inline(always)]
pub fn is_wiredand(&self) -> bool {
*self == MODE1_A::WIREDAND
}
#[doc = "Checks if the value of the field is `WIREDANDFILTER`"]
#[inline(always)]
pub fn is_wiredandfilter(&self) -> bool {
*self == MODE1_A::WIREDANDFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUP`"]
#[inline(always)]
pub fn is_wiredandpullup(&self) -> bool {
*self == MODE1_A::WIREDANDPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredandpullupfilter(&self) -> bool {
*self == MODE1_A::WIREDANDPULLUPFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVE`"]
#[inline(always)]
pub fn is_wiredanddrive(&self) -> bool {
*self == MODE1_A::WIREDANDDRIVE
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEFILTER`"]
#[inline(always)]
pub fn is_wiredanddrivefilter(&self) -> bool {
*self == MODE1_A::WIREDANDDRIVEFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEPULLUP`"]
#[inline(always)]
pub fn is_wiredanddrivepullup(&self) -> bool {
*self == MODE1_A::WIREDANDDRIVEPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredanddrivepullupfilter(&self) -> bool {
*self == MODE1_A::WIREDANDDRIVEPULLUPFILTER
}
}
#[doc = "Field `MODE1` writer - Pin 1 Mode"]
pub type MODE1_W<'a> = crate::FieldWriterSafe<'a, u32, PA_MODEL_SPEC, u8, MODE1_A, 4, 4>;
impl<'a> MODE1_W<'a> {
#[doc = "Input disabled. Pullup if DOUT is set."]
#[inline(always)]
pub fn disabled(self) -> &'a mut W {
self.variant(MODE1_A::DISABLED)
}
#[doc = "Input enabled. Filter if DOUT is set"]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(MODE1_A::INPUT)
}
#[doc = "Input enabled. DOUT determines pull direction"]
#[inline(always)]
pub fn inputpull(self) -> &'a mut W {
self.variant(MODE1_A::INPUTPULL)
}
#[doc = "Input enabled with filter. DOUT determines pull direction"]
#[inline(always)]
pub fn inputpullfilter(self) -> &'a mut W {
self.variant(MODE1_A::INPUTPULLFILTER)
}
#[doc = "Push-pull output"]
#[inline(always)]
pub fn pushpull(self) -> &'a mut W {
self.variant(MODE1_A::PUSHPULL)
}
#[doc = "Push-pull output with drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn pushpulldrive(self) -> &'a mut W {
self.variant(MODE1_A::PUSHPULLDRIVE)
}
#[doc = "Wired-or output"]
#[inline(always)]
pub fn wiredor(self) -> &'a mut W {
self.variant(MODE1_A::WIREDOR)
}
#[doc = "Wired-or output with pull-down"]
#[inline(always)]
pub fn wiredorpulldown(self) -> &'a mut W {
self.variant(MODE1_A::WIREDORPULLDOWN)
}
#[doc = "Open-drain output"]
#[inline(always)]
pub fn wiredand(self) -> &'a mut W {
self.variant(MODE1_A::WIREDAND)
}
#[doc = "Open-drain output with filter"]
#[inline(always)]
pub fn wiredandfilter(self) -> &'a mut W {
self.variant(MODE1_A::WIREDANDFILTER)
}
#[doc = "Open-drain output with pullup"]
#[inline(always)]
pub fn wiredandpullup(self) -> &'a mut W {
self.variant(MODE1_A::WIREDANDPULLUP)
}
#[doc = "Open-drain output with filter and pullup"]
#[inline(always)]
pub fn wiredandpullupfilter(self) -> &'a mut W {
self.variant(MODE1_A::WIREDANDPULLUPFILTER)
}
#[doc = "Open-drain output with drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrive(self) -> &'a mut W {
self.variant(MODE1_A::WIREDANDDRIVE)
}
#[doc = "Open-drain output with filter and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivefilter(self) -> &'a mut W {
self.variant(MODE1_A::WIREDANDDRIVEFILTER)
}
#[doc = "Open-drain output with pullup and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivepullup(self) -> &'a mut W {
self.variant(MODE1_A::WIREDANDDRIVEPULLUP)
}
#[doc = "Open-drain output with filter, pullup and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivepullupfilter(self) -> &'a mut W {
self.variant(MODE1_A::WIREDANDDRIVEPULLUPFILTER)
}
}
#[doc = "Pin 2 Mode\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum MODE2_A {
#[doc = "0: Input disabled. Pullup if DOUT is set."]
DISABLED = 0,
#[doc = "1: Input enabled. Filter if DOUT is set"]
INPUT = 1,
#[doc = "2: Input enabled. DOUT determines pull direction"]
INPUTPULL = 2,
#[doc = "3: Input enabled with filter. DOUT determines pull direction"]
INPUTPULLFILTER = 3,
#[doc = "4: Push-pull output"]
PUSHPULL = 4,
#[doc = "5: Push-pull output with drive-strength set by DRIVEMODE"]
PUSHPULLDRIVE = 5,
#[doc = "6: Wired-or output"]
WIREDOR = 6,
#[doc = "7: Wired-or output with pull-down"]
WIREDORPULLDOWN = 7,
#[doc = "8: Open-drain output"]
WIREDAND = 8,
#[doc = "9: Open-drain output with filter"]
WIREDANDFILTER = 9,
#[doc = "10: Open-drain output with pullup"]
WIREDANDPULLUP = 10,
#[doc = "11: Open-drain output with filter and pullup"]
WIREDANDPULLUPFILTER = 11,
#[doc = "12: Open-drain output with drive-strength set by DRIVEMODE"]
WIREDANDDRIVE = 12,
#[doc = "13: Open-drain output with filter and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEFILTER = 13,
#[doc = "14: Open-drain output with pullup and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEPULLUP = 14,
#[doc = "15: Open-drain output with filter, pullup and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEPULLUPFILTER = 15,
}
impl From<MODE2_A> for u8 {
#[inline(always)]
fn from(variant: MODE2_A) -> Self {
variant as _
}
}
#[doc = "Field `MODE2` reader - Pin 2 Mode"]
pub type MODE2_R = crate::FieldReader<u8, MODE2_A>;
impl MODE2_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> MODE2_A {
match self.bits {
0 => MODE2_A::DISABLED,
1 => MODE2_A::INPUT,
2 => MODE2_A::INPUTPULL,
3 => MODE2_A::INPUTPULLFILTER,
4 => MODE2_A::PUSHPULL,
5 => MODE2_A::PUSHPULLDRIVE,
6 => MODE2_A::WIREDOR,
7 => MODE2_A::WIREDORPULLDOWN,
8 => MODE2_A::WIREDAND,
9 => MODE2_A::WIREDANDFILTER,
10 => MODE2_A::WIREDANDPULLUP,
11 => MODE2_A::WIREDANDPULLUPFILTER,
12 => MODE2_A::WIREDANDDRIVE,
13 => MODE2_A::WIREDANDDRIVEFILTER,
14 => MODE2_A::WIREDANDDRIVEPULLUP,
15 => MODE2_A::WIREDANDDRIVEPULLUPFILTER,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `DISABLED`"]
#[inline(always)]
pub fn is_disabled(&self) -> bool {
*self == MODE2_A::DISABLED
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == MODE2_A::INPUT
}
#[doc = "Checks if the value of the field is `INPUTPULL`"]
#[inline(always)]
pub fn is_inputpull(&self) -> bool {
*self == MODE2_A::INPUTPULL
}
#[doc = "Checks if the value of the field is `INPUTPULLFILTER`"]
#[inline(always)]
pub fn is_inputpullfilter(&self) -> bool {
*self == MODE2_A::INPUTPULLFILTER
}
#[doc = "Checks if the value of the field is `PUSHPULL`"]
#[inline(always)]
pub fn is_pushpull(&self) -> bool {
*self == MODE2_A::PUSHPULL
}
#[doc = "Checks if the value of the field is `PUSHPULLDRIVE`"]
#[inline(always)]
pub fn is_pushpulldrive(&self) -> bool {
*self == MODE2_A::PUSHPULLDRIVE
}
#[doc = "Checks if the value of the field is `WIREDOR`"]
#[inline(always)]
pub fn is_wiredor(&self) -> bool {
*self == MODE2_A::WIREDOR
}
#[doc = "Checks if the value of the field is `WIREDORPULLDOWN`"]
#[inline(always)]
pub fn is_wiredorpulldown(&self) -> bool {
*self == MODE2_A::WIREDORPULLDOWN
}
#[doc = "Checks if the value of the field is `WIREDAND`"]
#[inline(always)]
pub fn is_wiredand(&self) -> bool {
*self == MODE2_A::WIREDAND
}
#[doc = "Checks if the value of the field is `WIREDANDFILTER`"]
#[inline(always)]
pub fn is_wiredandfilter(&self) -> bool {
*self == MODE2_A::WIREDANDFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUP`"]
#[inline(always)]
pub fn is_wiredandpullup(&self) -> bool {
*self == MODE2_A::WIREDANDPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredandpullupfilter(&self) -> bool {
*self == MODE2_A::WIREDANDPULLUPFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVE`"]
#[inline(always)]
pub fn is_wiredanddrive(&self) -> bool {
*self == MODE2_A::WIREDANDDRIVE
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEFILTER`"]
#[inline(always)]
pub fn is_wiredanddrivefilter(&self) -> bool {
*self == MODE2_A::WIREDANDDRIVEFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEPULLUP`"]
#[inline(always)]
pub fn is_wiredanddrivepullup(&self) -> bool {
*self == MODE2_A::WIREDANDDRIVEPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredanddrivepullupfilter(&self) -> bool {
*self == MODE2_A::WIREDANDDRIVEPULLUPFILTER
}
}
#[doc = "Field `MODE2` writer - Pin 2 Mode"]
pub type MODE2_W<'a> = crate::FieldWriterSafe<'a, u32, PA_MODEL_SPEC, u8, MODE2_A, 4, 8>;
impl<'a> MODE2_W<'a> {
#[doc = "Input disabled. Pullup if DOUT is set."]
#[inline(always)]
pub fn disabled(self) -> &'a mut W {
self.variant(MODE2_A::DISABLED)
}
#[doc = "Input enabled. Filter if DOUT is set"]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(MODE2_A::INPUT)
}
#[doc = "Input enabled. DOUT determines pull direction"]
#[inline(always)]
pub fn inputpull(self) -> &'a mut W {
self.variant(MODE2_A::INPUTPULL)
}
#[doc = "Input enabled with filter. DOUT determines pull direction"]
#[inline(always)]
pub fn inputpullfilter(self) -> &'a mut W {
self.variant(MODE2_A::INPUTPULLFILTER)
}
#[doc = "Push-pull output"]
#[inline(always)]
pub fn pushpull(self) -> &'a mut W {
self.variant(MODE2_A::PUSHPULL)
}
#[doc = "Push-pull output with drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn pushpulldrive(self) -> &'a mut W {
self.variant(MODE2_A::PUSHPULLDRIVE)
}
#[doc = "Wired-or output"]
#[inline(always)]
pub fn wiredor(self) -> &'a mut W {
self.variant(MODE2_A::WIREDOR)
}
#[doc = "Wired-or output with pull-down"]
#[inline(always)]
pub fn wiredorpulldown(self) -> &'a mut W {
self.variant(MODE2_A::WIREDORPULLDOWN)
}
#[doc = "Open-drain output"]
#[inline(always)]
pub fn wiredand(self) -> &'a mut W {
self.variant(MODE2_A::WIREDAND)
}
#[doc = "Open-drain output with filter"]
#[inline(always)]
pub fn wiredandfilter(self) -> &'a mut W {
self.variant(MODE2_A::WIREDANDFILTER)
}
#[doc = "Open-drain output with pullup"]
#[inline(always)]
pub fn wiredandpullup(self) -> &'a mut W {
self.variant(MODE2_A::WIREDANDPULLUP)
}
#[doc = "Open-drain output with filter and pullup"]
#[inline(always)]
pub fn wiredandpullupfilter(self) -> &'a mut W {
self.variant(MODE2_A::WIREDANDPULLUPFILTER)
}
#[doc = "Open-drain output with drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrive(self) -> &'a mut W {
self.variant(MODE2_A::WIREDANDDRIVE)
}
#[doc = "Open-drain output with filter and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivefilter(self) -> &'a mut W {
self.variant(MODE2_A::WIREDANDDRIVEFILTER)
}
#[doc = "Open-drain output with pullup and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivepullup(self) -> &'a mut W {
self.variant(MODE2_A::WIREDANDDRIVEPULLUP)
}
#[doc = "Open-drain output with filter, pullup and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivepullupfilter(self) -> &'a mut W {
self.variant(MODE2_A::WIREDANDDRIVEPULLUPFILTER)
}
}
#[doc = "Pin 3 Mode\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum MODE3_A {
#[doc = "0: Input disabled. Pullup if DOUT is set."]
DISABLED = 0,
#[doc = "1: Input enabled. Filter if DOUT is set"]
INPUT = 1,
#[doc = "2: Input enabled. DOUT determines pull direction"]
INPUTPULL = 2,
#[doc = "3: Input enabled with filter. DOUT determines pull direction"]
INPUTPULLFILTER = 3,
#[doc = "4: Push-pull output"]
PUSHPULL = 4,
#[doc = "5: Push-pull output with drive-strength set by DRIVEMODE"]
PUSHPULLDRIVE = 5,
#[doc = "6: Wired-or output"]
WIREDOR = 6,
#[doc = "7: Wired-or output with pull-down"]
WIREDORPULLDOWN = 7,
#[doc = "8: Open-drain output"]
WIREDAND = 8,
#[doc = "9: Open-drain output with filter"]
WIREDANDFILTER = 9,
#[doc = "10: Open-drain output with pullup"]
WIREDANDPULLUP = 10,
#[doc = "11: Open-drain output with filter and pullup"]
WIREDANDPULLUPFILTER = 11,
#[doc = "12: Open-drain output with drive-strength set by DRIVEMODE"]
WIREDANDDRIVE = 12,
#[doc = "13: Open-drain output with filter and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEFILTER = 13,
#[doc = "14: Open-drain output with pullup and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEPULLUP = 14,
#[doc = "15: Open-drain output with filter, pullup and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEPULLUPFILTER = 15,
}
impl From<MODE3_A> for u8 {
#[inline(always)]
fn from(variant: MODE3_A) -> Self {
variant as _
}
}
#[doc = "Field `MODE3` reader - Pin 3 Mode"]
pub type MODE3_R = crate::FieldReader<u8, MODE3_A>;
impl MODE3_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> MODE3_A {
match self.bits {
0 => MODE3_A::DISABLED,
1 => MODE3_A::INPUT,
2 => MODE3_A::INPUTPULL,
3 => MODE3_A::INPUTPULLFILTER,
4 => MODE3_A::PUSHPULL,
5 => MODE3_A::PUSHPULLDRIVE,
6 => MODE3_A::WIREDOR,
7 => MODE3_A::WIREDORPULLDOWN,
8 => MODE3_A::WIREDAND,
9 => MODE3_A::WIREDANDFILTER,
10 => MODE3_A::WIREDANDPULLUP,
11 => MODE3_A::WIREDANDPULLUPFILTER,
12 => MODE3_A::WIREDANDDRIVE,
13 => MODE3_A::WIREDANDDRIVEFILTER,
14 => MODE3_A::WIREDANDDRIVEPULLUP,
15 => MODE3_A::WIREDANDDRIVEPULLUPFILTER,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `DISABLED`"]
#[inline(always)]
pub fn is_disabled(&self) -> bool {
*self == MODE3_A::DISABLED
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == MODE3_A::INPUT
}
#[doc = "Checks if the value of the field is `INPUTPULL`"]
#[inline(always)]
pub fn is_inputpull(&self) -> bool {
*self == MODE3_A::INPUTPULL
}
#[doc = "Checks if the value of the field is `INPUTPULLFILTER`"]
#[inline(always)]
pub fn is_inputpullfilter(&self) -> bool {
*self == MODE3_A::INPUTPULLFILTER
}
#[doc = "Checks if the value of the field is `PUSHPULL`"]
#[inline(always)]
pub fn is_pushpull(&self) -> bool {
*self == MODE3_A::PUSHPULL
}
#[doc = "Checks if the value of the field is `PUSHPULLDRIVE`"]
#[inline(always)]
pub fn is_pushpulldrive(&self) -> bool {
*self == MODE3_A::PUSHPULLDRIVE
}
#[doc = "Checks if the value of the field is `WIREDOR`"]
#[inline(always)]
pub fn is_wiredor(&self) -> bool {
*self == MODE3_A::WIREDOR
}
#[doc = "Checks if the value of the field is `WIREDORPULLDOWN`"]
#[inline(always)]
pub fn is_wiredorpulldown(&self) -> bool {
*self == MODE3_A::WIREDORPULLDOWN
}
#[doc = "Checks if the value of the field is `WIREDAND`"]
#[inline(always)]
pub fn is_wiredand(&self) -> bool {
*self == MODE3_A::WIREDAND
}
#[doc = "Checks if the value of the field is `WIREDANDFILTER`"]
#[inline(always)]
pub fn is_wiredandfilter(&self) -> bool {
*self == MODE3_A::WIREDANDFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUP`"]
#[inline(always)]
pub fn is_wiredandpullup(&self) -> bool {
*self == MODE3_A::WIREDANDPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredandpullupfilter(&self) -> bool {
*self == MODE3_A::WIREDANDPULLUPFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVE`"]
#[inline(always)]
pub fn is_wiredanddrive(&self) -> bool {
*self == MODE3_A::WIREDANDDRIVE
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEFILTER`"]
#[inline(always)]
pub fn is_wiredanddrivefilter(&self) -> bool {
*self == MODE3_A::WIREDANDDRIVEFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEPULLUP`"]
#[inline(always)]
pub fn is_wiredanddrivepullup(&self) -> bool {
*self == MODE3_A::WIREDANDDRIVEPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredanddrivepullupfilter(&self) -> bool {
*self == MODE3_A::WIREDANDDRIVEPULLUPFILTER
}
}
#[doc = "Field `MODE3` writer - Pin 3 Mode"]
pub type MODE3_W<'a> = crate::FieldWriterSafe<'a, u32, PA_MODEL_SPEC, u8, MODE3_A, 4, 12>;
impl<'a> MODE3_W<'a> {
#[doc = "Input disabled. Pullup if DOUT is set."]
#[inline(always)]
pub fn disabled(self) -> &'a mut W {
self.variant(MODE3_A::DISABLED)
}
#[doc = "Input enabled. Filter if DOUT is set"]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(MODE3_A::INPUT)
}
#[doc = "Input enabled. DOUT determines pull direction"]
#[inline(always)]
pub fn inputpull(self) -> &'a mut W {
self.variant(MODE3_A::INPUTPULL)
}
#[doc = "Input enabled with filter. DOUT determines pull direction"]
#[inline(always)]
pub fn inputpullfilter(self) -> &'a mut W {
self.variant(MODE3_A::INPUTPULLFILTER)
}
#[doc = "Push-pull output"]
#[inline(always)]
pub fn pushpull(self) -> &'a mut W {
self.variant(MODE3_A::PUSHPULL)
}
#[doc = "Push-pull output with drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn pushpulldrive(self) -> &'a mut W {
self.variant(MODE3_A::PUSHPULLDRIVE)
}
#[doc = "Wired-or output"]
#[inline(always)]
pub fn wiredor(self) -> &'a mut W {
self.variant(MODE3_A::WIREDOR)
}
#[doc = "Wired-or output with pull-down"]
#[inline(always)]
pub fn wiredorpulldown(self) -> &'a mut W {
self.variant(MODE3_A::WIREDORPULLDOWN)
}
#[doc = "Open-drain output"]
#[inline(always)]
pub fn wiredand(self) -> &'a mut W {
self.variant(MODE3_A::WIREDAND)
}
#[doc = "Open-drain output with filter"]
#[inline(always)]
pub fn wiredandfilter(self) -> &'a mut W {
self.variant(MODE3_A::WIREDANDFILTER)
}
#[doc = "Open-drain output with pullup"]
#[inline(always)]
pub fn wiredandpullup(self) -> &'a mut W {
self.variant(MODE3_A::WIREDANDPULLUP)
}
#[doc = "Open-drain output with filter and pullup"]
#[inline(always)]
pub fn wiredandpullupfilter(self) -> &'a mut W {
self.variant(MODE3_A::WIREDANDPULLUPFILTER)
}
#[doc = "Open-drain output with drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrive(self) -> &'a mut W {
self.variant(MODE3_A::WIREDANDDRIVE)
}
#[doc = "Open-drain output with filter and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivefilter(self) -> &'a mut W {
self.variant(MODE3_A::WIREDANDDRIVEFILTER)
}
#[doc = "Open-drain output with pullup and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivepullup(self) -> &'a mut W {
self.variant(MODE3_A::WIREDANDDRIVEPULLUP)
}
#[doc = "Open-drain output with filter, pullup and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivepullupfilter(self) -> &'a mut W {
self.variant(MODE3_A::WIREDANDDRIVEPULLUPFILTER)
}
}
#[doc = "Pin 4 Mode\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum MODE4_A {
#[doc = "0: Input disabled. Pullup if DOUT is set."]
DISABLED = 0,
#[doc = "1: Input enabled. Filter if DOUT is set"]
INPUT = 1,
#[doc = "2: Input enabled. DOUT determines pull direction"]
INPUTPULL = 2,
#[doc = "3: Input enabled with filter. DOUT determines pull direction"]
INPUTPULLFILTER = 3,
#[doc = "4: Push-pull output"]
PUSHPULL = 4,
#[doc = "5: Push-pull output with drive-strength set by DRIVEMODE"]
PUSHPULLDRIVE = 5,
#[doc = "6: Wired-or output"]
WIREDOR = 6,
#[doc = "7: Wired-or output with pull-down"]
WIREDORPULLDOWN = 7,
#[doc = "8: Open-drain output"]
WIREDAND = 8,
#[doc = "9: Open-drain output with filter"]
WIREDANDFILTER = 9,
#[doc = "10: Open-drain output with pullup"]
WIREDANDPULLUP = 10,
#[doc = "11: Open-drain output with filter and pullup"]
WIREDANDPULLUPFILTER = 11,
#[doc = "12: Open-drain output with drive-strength set by DRIVEMODE"]
WIREDANDDRIVE = 12,
#[doc = "13: Open-drain output with filter and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEFILTER = 13,
#[doc = "14: Open-drain output with pullup and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEPULLUP = 14,
#[doc = "15: Open-drain output with filter, pullup and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEPULLUPFILTER = 15,
}
impl From<MODE4_A> for u8 {
#[inline(always)]
fn from(variant: MODE4_A) -> Self {
variant as _
}
}
#[doc = "Field `MODE4` reader - Pin 4 Mode"]
pub type MODE4_R = crate::FieldReader<u8, MODE4_A>;
impl MODE4_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> MODE4_A {
match self.bits {
0 => MODE4_A::DISABLED,
1 => MODE4_A::INPUT,
2 => MODE4_A::INPUTPULL,
3 => MODE4_A::INPUTPULLFILTER,
4 => MODE4_A::PUSHPULL,
5 => MODE4_A::PUSHPULLDRIVE,
6 => MODE4_A::WIREDOR,
7 => MODE4_A::WIREDORPULLDOWN,
8 => MODE4_A::WIREDAND,
9 => MODE4_A::WIREDANDFILTER,
10 => MODE4_A::WIREDANDPULLUP,
11 => MODE4_A::WIREDANDPULLUPFILTER,
12 => MODE4_A::WIREDANDDRIVE,
13 => MODE4_A::WIREDANDDRIVEFILTER,
14 => MODE4_A::WIREDANDDRIVEPULLUP,
15 => MODE4_A::WIREDANDDRIVEPULLUPFILTER,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `DISABLED`"]
#[inline(always)]
pub fn is_disabled(&self) -> bool {
*self == MODE4_A::DISABLED
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == MODE4_A::INPUT
}
#[doc = "Checks if the value of the field is `INPUTPULL`"]
#[inline(always)]
pub fn is_inputpull(&self) -> bool {
*self == MODE4_A::INPUTPULL
}
#[doc = "Checks if the value of the field is `INPUTPULLFILTER`"]
#[inline(always)]
pub fn is_inputpullfilter(&self) -> bool {
*self == MODE4_A::INPUTPULLFILTER
}
#[doc = "Checks if the value of the field is `PUSHPULL`"]
#[inline(always)]
pub fn is_pushpull(&self) -> bool {
*self == MODE4_A::PUSHPULL
}
#[doc = "Checks if the value of the field is `PUSHPULLDRIVE`"]
#[inline(always)]
pub fn is_pushpulldrive(&self) -> bool {
*self == MODE4_A::PUSHPULLDRIVE
}
#[doc = "Checks if the value of the field is `WIREDOR`"]
#[inline(always)]
pub fn is_wiredor(&self) -> bool {
*self == MODE4_A::WIREDOR
}
#[doc = "Checks if the value of the field is `WIREDORPULLDOWN`"]
#[inline(always)]
pub fn is_wiredorpulldown(&self) -> bool {
*self == MODE4_A::WIREDORPULLDOWN
}
#[doc = "Checks if the value of the field is `WIREDAND`"]
#[inline(always)]
pub fn is_wiredand(&self) -> bool {
*self == MODE4_A::WIREDAND
}
#[doc = "Checks if the value of the field is `WIREDANDFILTER`"]
#[inline(always)]
pub fn is_wiredandfilter(&self) -> bool {
*self == MODE4_A::WIREDANDFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUP`"]
#[inline(always)]
pub fn is_wiredandpullup(&self) -> bool {
*self == MODE4_A::WIREDANDPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredandpullupfilter(&self) -> bool {
*self == MODE4_A::WIREDANDPULLUPFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVE`"]
#[inline(always)]
pub fn is_wiredanddrive(&self) -> bool {
*self == MODE4_A::WIREDANDDRIVE
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEFILTER`"]
#[inline(always)]
pub fn is_wiredanddrivefilter(&self) -> bool {
*self == MODE4_A::WIREDANDDRIVEFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEPULLUP`"]
#[inline(always)]
pub fn is_wiredanddrivepullup(&self) -> bool {
*self == MODE4_A::WIREDANDDRIVEPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredanddrivepullupfilter(&self) -> bool {
*self == MODE4_A::WIREDANDDRIVEPULLUPFILTER
}
}
#[doc = "Field `MODE4` writer - Pin 4 Mode"]
pub type MODE4_W<'a> = crate::FieldWriterSafe<'a, u32, PA_MODEL_SPEC, u8, MODE4_A, 4, 16>;
impl<'a> MODE4_W<'a> {
#[doc = "Input disabled. Pullup if DOUT is set."]
#[inline(always)]
pub fn disabled(self) -> &'a mut W {
self.variant(MODE4_A::DISABLED)
}
#[doc = "Input enabled. Filter if DOUT is set"]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(MODE4_A::INPUT)
}
#[doc = "Input enabled. DOUT determines pull direction"]
#[inline(always)]
pub fn inputpull(self) -> &'a mut W {
self.variant(MODE4_A::INPUTPULL)
}
#[doc = "Input enabled with filter. DOUT determines pull direction"]
#[inline(always)]
pub fn inputpullfilter(self) -> &'a mut W {
self.variant(MODE4_A::INPUTPULLFILTER)
}
#[doc = "Push-pull output"]
#[inline(always)]
pub fn pushpull(self) -> &'a mut W {
self.variant(MODE4_A::PUSHPULL)
}
#[doc = "Push-pull output with drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn pushpulldrive(self) -> &'a mut W {
self.variant(MODE4_A::PUSHPULLDRIVE)
}
#[doc = "Wired-or output"]
#[inline(always)]
pub fn wiredor(self) -> &'a mut W {
self.variant(MODE4_A::WIREDOR)
}
#[doc = "Wired-or output with pull-down"]
#[inline(always)]
pub fn wiredorpulldown(self) -> &'a mut W {
self.variant(MODE4_A::WIREDORPULLDOWN)
}
#[doc = "Open-drain output"]
#[inline(always)]
pub fn wiredand(self) -> &'a mut W {
self.variant(MODE4_A::WIREDAND)
}
#[doc = "Open-drain output with filter"]
#[inline(always)]
pub fn wiredandfilter(self) -> &'a mut W {
self.variant(MODE4_A::WIREDANDFILTER)
}
#[doc = "Open-drain output with pullup"]
#[inline(always)]
pub fn wiredandpullup(self) -> &'a mut W {
self.variant(MODE4_A::WIREDANDPULLUP)
}
#[doc = "Open-drain output with filter and pullup"]
#[inline(always)]
pub fn wiredandpullupfilter(self) -> &'a mut W {
self.variant(MODE4_A::WIREDANDPULLUPFILTER)
}
#[doc = "Open-drain output with drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrive(self) -> &'a mut W {
self.variant(MODE4_A::WIREDANDDRIVE)
}
#[doc = "Open-drain output with filter and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivefilter(self) -> &'a mut W {
self.variant(MODE4_A::WIREDANDDRIVEFILTER)
}
#[doc = "Open-drain output with pullup and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivepullup(self) -> &'a mut W {
self.variant(MODE4_A::WIREDANDDRIVEPULLUP)
}
#[doc = "Open-drain output with filter, pullup and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivepullupfilter(self) -> &'a mut W {
self.variant(MODE4_A::WIREDANDDRIVEPULLUPFILTER)
}
}
#[doc = "Pin 5 Mode\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum MODE5_A {
#[doc = "0: Input disabled. Pullup if DOUT is set."]
DISABLED = 0,
#[doc = "1: Input enabled. Filter if DOUT is set"]
INPUT = 1,
#[doc = "2: Input enabled. DOUT determines pull direction"]
INPUTPULL = 2,
#[doc = "3: Input enabled with filter. DOUT determines pull direction"]
INPUTPULLFILTER = 3,
#[doc = "4: Push-pull output"]
PUSHPULL = 4,
#[doc = "5: Push-pull output with drive-strength set by DRIVEMODE"]
PUSHPULLDRIVE = 5,
#[doc = "6: Wired-or output"]
WIREDOR = 6,
#[doc = "7: Wired-or output with pull-down"]
WIREDORPULLDOWN = 7,
#[doc = "8: Open-drain output"]
WIREDAND = 8,
#[doc = "9: Open-drain output with filter"]
WIREDANDFILTER = 9,
#[doc = "10: Open-drain output with pullup"]
WIREDANDPULLUP = 10,
#[doc = "11: Open-drain output with filter and pullup"]
WIREDANDPULLUPFILTER = 11,
#[doc = "12: Open-drain output with drive-strength set by DRIVEMODE"]
WIREDANDDRIVE = 12,
#[doc = "13: Open-drain output with filter and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEFILTER = 13,
#[doc = "14: Open-drain output with pullup and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEPULLUP = 14,
#[doc = "15: Open-drain output with filter, pullup and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEPULLUPFILTER = 15,
}
impl From<MODE5_A> for u8 {
#[inline(always)]
fn from(variant: MODE5_A) -> Self {
variant as _
}
}
#[doc = "Field `MODE5` reader - Pin 5 Mode"]
pub type MODE5_R = crate::FieldReader<u8, MODE5_A>;
impl MODE5_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> MODE5_A {
match self.bits {
0 => MODE5_A::DISABLED,
1 => MODE5_A::INPUT,
2 => MODE5_A::INPUTPULL,
3 => MODE5_A::INPUTPULLFILTER,
4 => MODE5_A::PUSHPULL,
5 => MODE5_A::PUSHPULLDRIVE,
6 => MODE5_A::WIREDOR,
7 => MODE5_A::WIREDORPULLDOWN,
8 => MODE5_A::WIREDAND,
9 => MODE5_A::WIREDANDFILTER,
10 => MODE5_A::WIREDANDPULLUP,
11 => MODE5_A::WIREDANDPULLUPFILTER,
12 => MODE5_A::WIREDANDDRIVE,
13 => MODE5_A::WIREDANDDRIVEFILTER,
14 => MODE5_A::WIREDANDDRIVEPULLUP,
15 => MODE5_A::WIREDANDDRIVEPULLUPFILTER,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `DISABLED`"]
#[inline(always)]
pub fn is_disabled(&self) -> bool {
*self == MODE5_A::DISABLED
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == MODE5_A::INPUT
}
#[doc = "Checks if the value of the field is `INPUTPULL`"]
#[inline(always)]
pub fn is_inputpull(&self) -> bool {
*self == MODE5_A::INPUTPULL
}
#[doc = "Checks if the value of the field is `INPUTPULLFILTER`"]
#[inline(always)]
pub fn is_inputpullfilter(&self) -> bool {
*self == MODE5_A::INPUTPULLFILTER
}
#[doc = "Checks if the value of the field is `PUSHPULL`"]
#[inline(always)]
pub fn is_pushpull(&self) -> bool {
*self == MODE5_A::PUSHPULL
}
#[doc = "Checks if the value of the field is `PUSHPULLDRIVE`"]
#[inline(always)]
pub fn is_pushpulldrive(&self) -> bool {
*self == MODE5_A::PUSHPULLDRIVE
}
#[doc = "Checks if the value of the field is `WIREDOR`"]
#[inline(always)]
pub fn is_wiredor(&self) -> bool {
*self == MODE5_A::WIREDOR
}
#[doc = "Checks if the value of the field is `WIREDORPULLDOWN`"]
#[inline(always)]
pub fn is_wiredorpulldown(&self) -> bool {
*self == MODE5_A::WIREDORPULLDOWN
}
#[doc = "Checks if the value of the field is `WIREDAND`"]
#[inline(always)]
pub fn is_wiredand(&self) -> bool {
*self == MODE5_A::WIREDAND
}
#[doc = "Checks if the value of the field is `WIREDANDFILTER`"]
#[inline(always)]
pub fn is_wiredandfilter(&self) -> bool {
*self == MODE5_A::WIREDANDFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUP`"]
#[inline(always)]
pub fn is_wiredandpullup(&self) -> bool {
*self == MODE5_A::WIREDANDPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredandpullupfilter(&self) -> bool {
*self == MODE5_A::WIREDANDPULLUPFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVE`"]
#[inline(always)]
pub fn is_wiredanddrive(&self) -> bool {
*self == MODE5_A::WIREDANDDRIVE
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEFILTER`"]
#[inline(always)]
pub fn is_wiredanddrivefilter(&self) -> bool {
*self == MODE5_A::WIREDANDDRIVEFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEPULLUP`"]
#[inline(always)]
pub fn is_wiredanddrivepullup(&self) -> bool {
*self == MODE5_A::WIREDANDDRIVEPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredanddrivepullupfilter(&self) -> bool {
*self == MODE5_A::WIREDANDDRIVEPULLUPFILTER
}
}
#[doc = "Field `MODE5` writer - Pin 5 Mode"]
pub type MODE5_W<'a> = crate::FieldWriterSafe<'a, u32, PA_MODEL_SPEC, u8, MODE5_A, 4, 20>;
impl<'a> MODE5_W<'a> {
#[doc = "Input disabled. Pullup if DOUT is set."]
#[inline(always)]
pub fn disabled(self) -> &'a mut W {
self.variant(MODE5_A::DISABLED)
}
#[doc = "Input enabled. Filter if DOUT is set"]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(MODE5_A::INPUT)
}
#[doc = "Input enabled. DOUT determines pull direction"]
#[inline(always)]
pub fn inputpull(self) -> &'a mut W {
self.variant(MODE5_A::INPUTPULL)
}
#[doc = "Input enabled with filter. DOUT determines pull direction"]
#[inline(always)]
pub fn inputpullfilter(self) -> &'a mut W {
self.variant(MODE5_A::INPUTPULLFILTER)
}
#[doc = "Push-pull output"]
#[inline(always)]
pub fn pushpull(self) -> &'a mut W {
self.variant(MODE5_A::PUSHPULL)
}
#[doc = "Push-pull output with drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn pushpulldrive(self) -> &'a mut W {
self.variant(MODE5_A::PUSHPULLDRIVE)
}
#[doc = "Wired-or output"]
#[inline(always)]
pub fn wiredor(self) -> &'a mut W {
self.variant(MODE5_A::WIREDOR)
}
#[doc = "Wired-or output with pull-down"]
#[inline(always)]
pub fn wiredorpulldown(self) -> &'a mut W {
self.variant(MODE5_A::WIREDORPULLDOWN)
}
#[doc = "Open-drain output"]
#[inline(always)]
pub fn wiredand(self) -> &'a mut W {
self.variant(MODE5_A::WIREDAND)
}
#[doc = "Open-drain output with filter"]
#[inline(always)]
pub fn wiredandfilter(self) -> &'a mut W {
self.variant(MODE5_A::WIREDANDFILTER)
}
#[doc = "Open-drain output with pullup"]
#[inline(always)]
pub fn wiredandpullup(self) -> &'a mut W {
self.variant(MODE5_A::WIREDANDPULLUP)
}
#[doc = "Open-drain output with filter and pullup"]
#[inline(always)]
pub fn wiredandpullupfilter(self) -> &'a mut W {
self.variant(MODE5_A::WIREDANDPULLUPFILTER)
}
#[doc = "Open-drain output with drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrive(self) -> &'a mut W {
self.variant(MODE5_A::WIREDANDDRIVE)
}
#[doc = "Open-drain output with filter and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivefilter(self) -> &'a mut W {
self.variant(MODE5_A::WIREDANDDRIVEFILTER)
}
#[doc = "Open-drain output with pullup and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivepullup(self) -> &'a mut W {
self.variant(MODE5_A::WIREDANDDRIVEPULLUP)
}
#[doc = "Open-drain output with filter, pullup and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivepullupfilter(self) -> &'a mut W {
self.variant(MODE5_A::WIREDANDDRIVEPULLUPFILTER)
}
}
#[doc = "Pin 6 Mode\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum MODE6_A {
#[doc = "0: Input disabled. Pullup if DOUT is set."]
DISABLED = 0,
#[doc = "1: Input enabled. Filter if DOUT is set"]
INPUT = 1,
#[doc = "2: Input enabled. DOUT determines pull direction"]
INPUTPULL = 2,
#[doc = "3: Input enabled with filter. DOUT determines pull direction"]
INPUTPULLFILTER = 3,
#[doc = "4: Push-pull output"]
PUSHPULL = 4,
#[doc = "5: Push-pull output with drive-strength set by DRIVEMODE"]
PUSHPULLDRIVE = 5,
#[doc = "6: Wired-or output"]
WIREDOR = 6,
#[doc = "7: Wired-or output with pull-down"]
WIREDORPULLDOWN = 7,
#[doc = "8: Open-drain output"]
WIREDAND = 8,
#[doc = "9: Open-drain output with filter"]
WIREDANDFILTER = 9,
#[doc = "10: Open-drain output with pullup"]
WIREDANDPULLUP = 10,
#[doc = "11: Open-drain output with filter and pullup"]
WIREDANDPULLUPFILTER = 11,
#[doc = "12: Open-drain output with drive-strength set by DRIVEMODE"]
WIREDANDDRIVE = 12,
#[doc = "13: Open-drain output with filter and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEFILTER = 13,
#[doc = "14: Open-drain output with pullup and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEPULLUP = 14,
#[doc = "15: Open-drain output with filter, pullup and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEPULLUPFILTER = 15,
}
impl From<MODE6_A> for u8 {
#[inline(always)]
fn from(variant: MODE6_A) -> Self {
variant as _
}
}
#[doc = "Field `MODE6` reader - Pin 6 Mode"]
pub type MODE6_R = crate::FieldReader<u8, MODE6_A>;
impl MODE6_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> MODE6_A {
match self.bits {
0 => MODE6_A::DISABLED,
1 => MODE6_A::INPUT,
2 => MODE6_A::INPUTPULL,
3 => MODE6_A::INPUTPULLFILTER,
4 => MODE6_A::PUSHPULL,
5 => MODE6_A::PUSHPULLDRIVE,
6 => MODE6_A::WIREDOR,
7 => MODE6_A::WIREDORPULLDOWN,
8 => MODE6_A::WIREDAND,
9 => MODE6_A::WIREDANDFILTER,
10 => MODE6_A::WIREDANDPULLUP,
11 => MODE6_A::WIREDANDPULLUPFILTER,
12 => MODE6_A::WIREDANDDRIVE,
13 => MODE6_A::WIREDANDDRIVEFILTER,
14 => MODE6_A::WIREDANDDRIVEPULLUP,
15 => MODE6_A::WIREDANDDRIVEPULLUPFILTER,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `DISABLED`"]
#[inline(always)]
pub fn is_disabled(&self) -> bool {
*self == MODE6_A::DISABLED
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == MODE6_A::INPUT
}
#[doc = "Checks if the value of the field is `INPUTPULL`"]
#[inline(always)]
pub fn is_inputpull(&self) -> bool {
*self == MODE6_A::INPUTPULL
}
#[doc = "Checks if the value of the field is `INPUTPULLFILTER`"]
#[inline(always)]
pub fn is_inputpullfilter(&self) -> bool {
*self == MODE6_A::INPUTPULLFILTER
}
#[doc = "Checks if the value of the field is `PUSHPULL`"]
#[inline(always)]
pub fn is_pushpull(&self) -> bool {
*self == MODE6_A::PUSHPULL
}
#[doc = "Checks if the value of the field is `PUSHPULLDRIVE`"]
#[inline(always)]
pub fn is_pushpulldrive(&self) -> bool {
*self == MODE6_A::PUSHPULLDRIVE
}
#[doc = "Checks if the value of the field is `WIREDOR`"]
#[inline(always)]
pub fn is_wiredor(&self) -> bool {
*self == MODE6_A::WIREDOR
}
#[doc = "Checks if the value of the field is `WIREDORPULLDOWN`"]
#[inline(always)]
pub fn is_wiredorpulldown(&self) -> bool {
*self == MODE6_A::WIREDORPULLDOWN
}
#[doc = "Checks if the value of the field is `WIREDAND`"]
#[inline(always)]
pub fn is_wiredand(&self) -> bool {
*self == MODE6_A::WIREDAND
}
#[doc = "Checks if the value of the field is `WIREDANDFILTER`"]
#[inline(always)]
pub fn is_wiredandfilter(&self) -> bool {
*self == MODE6_A::WIREDANDFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUP`"]
#[inline(always)]
pub fn is_wiredandpullup(&self) -> bool {
*self == MODE6_A::WIREDANDPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredandpullupfilter(&self) -> bool {
*self == MODE6_A::WIREDANDPULLUPFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVE`"]
#[inline(always)]
pub fn is_wiredanddrive(&self) -> bool {
*self == MODE6_A::WIREDANDDRIVE
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEFILTER`"]
#[inline(always)]
pub fn is_wiredanddrivefilter(&self) -> bool {
*self == MODE6_A::WIREDANDDRIVEFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEPULLUP`"]
#[inline(always)]
pub fn is_wiredanddrivepullup(&self) -> bool {
*self == MODE6_A::WIREDANDDRIVEPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredanddrivepullupfilter(&self) -> bool {
*self == MODE6_A::WIREDANDDRIVEPULLUPFILTER
}
}
#[doc = "Field `MODE6` writer - Pin 6 Mode"]
pub type MODE6_W<'a> = crate::FieldWriterSafe<'a, u32, PA_MODEL_SPEC, u8, MODE6_A, 4, 24>;
impl<'a> MODE6_W<'a> {
#[doc = "Input disabled. Pullup if DOUT is set."]
#[inline(always)]
pub fn disabled(self) -> &'a mut W {
self.variant(MODE6_A::DISABLED)
}
#[doc = "Input enabled. Filter if DOUT is set"]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(MODE6_A::INPUT)
}
#[doc = "Input enabled. DOUT determines pull direction"]
#[inline(always)]
pub fn inputpull(self) -> &'a mut W {
self.variant(MODE6_A::INPUTPULL)
}
#[doc = "Input enabled with filter. DOUT determines pull direction"]
#[inline(always)]
pub fn inputpullfilter(self) -> &'a mut W {
self.variant(MODE6_A::INPUTPULLFILTER)
}
#[doc = "Push-pull output"]
#[inline(always)]
pub fn pushpull(self) -> &'a mut W {
self.variant(MODE6_A::PUSHPULL)
}
#[doc = "Push-pull output with drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn pushpulldrive(self) -> &'a mut W {
self.variant(MODE6_A::PUSHPULLDRIVE)
}
#[doc = "Wired-or output"]
#[inline(always)]
pub fn wiredor(self) -> &'a mut W {
self.variant(MODE6_A::WIREDOR)
}
#[doc = "Wired-or output with pull-down"]
#[inline(always)]
pub fn wiredorpulldown(self) -> &'a mut W {
self.variant(MODE6_A::WIREDORPULLDOWN)
}
#[doc = "Open-drain output"]
#[inline(always)]
pub fn wiredand(self) -> &'a mut W {
self.variant(MODE6_A::WIREDAND)
}
#[doc = "Open-drain output with filter"]
#[inline(always)]
pub fn wiredandfilter(self) -> &'a mut W {
self.variant(MODE6_A::WIREDANDFILTER)
}
#[doc = "Open-drain output with pullup"]
#[inline(always)]
pub fn wiredandpullup(self) -> &'a mut W {
self.variant(MODE6_A::WIREDANDPULLUP)
}
#[doc = "Open-drain output with filter and pullup"]
#[inline(always)]
pub fn wiredandpullupfilter(self) -> &'a mut W {
self.variant(MODE6_A::WIREDANDPULLUPFILTER)
}
#[doc = "Open-drain output with drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrive(self) -> &'a mut W {
self.variant(MODE6_A::WIREDANDDRIVE)
}
#[doc = "Open-drain output with filter and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivefilter(self) -> &'a mut W {
self.variant(MODE6_A::WIREDANDDRIVEFILTER)
}
#[doc = "Open-drain output with pullup and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivepullup(self) -> &'a mut W {
self.variant(MODE6_A::WIREDANDDRIVEPULLUP)
}
#[doc = "Open-drain output with filter, pullup and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivepullupfilter(self) -> &'a mut W {
self.variant(MODE6_A::WIREDANDDRIVEPULLUPFILTER)
}
}
#[doc = "Pin 7 Mode\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum MODE7_A {
#[doc = "0: Input disabled. Pullup if DOUT is set."]
DISABLED = 0,
#[doc = "1: Input enabled. Filter if DOUT is set"]
INPUT = 1,
#[doc = "2: Input enabled. DOUT determines pull direction"]
INPUTPULL = 2,
#[doc = "3: Input enabled with filter. DOUT determines pull direction"]
INPUTPULLFILTER = 3,
#[doc = "4: Push-pull output"]
PUSHPULL = 4,
#[doc = "5: Push-pull output with drive-strength set by DRIVEMODE"]
PUSHPULLDRIVE = 5,
#[doc = "6: Wired-or output"]
WIREDOR = 6,
#[doc = "7: Wired-or output with pull-down"]
WIREDORPULLDOWN = 7,
#[doc = "8: Open-drain output"]
WIREDAND = 8,
#[doc = "9: Open-drain output with filter"]
WIREDANDFILTER = 9,
#[doc = "10: Open-drain output with pullup"]
WIREDANDPULLUP = 10,
#[doc = "11: Open-drain output with filter and pullup"]
WIREDANDPULLUPFILTER = 11,
#[doc = "12: Open-drain output with drive-strength set by DRIVEMODE"]
WIREDANDDRIVE = 12,
#[doc = "13: Open-drain output with filter and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEFILTER = 13,
#[doc = "14: Open-drain output with pullup and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEPULLUP = 14,
#[doc = "15: Open-drain output with filter, pullup and drive-strength set by DRIVEMODE"]
WIREDANDDRIVEPULLUPFILTER = 15,
}
impl From<MODE7_A> for u8 {
#[inline(always)]
fn from(variant: MODE7_A) -> Self {
variant as _
}
}
#[doc = "Field `MODE7` reader - Pin 7 Mode"]
pub type MODE7_R = crate::FieldReader<u8, MODE7_A>;
impl MODE7_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> MODE7_A {
match self.bits {
0 => MODE7_A::DISABLED,
1 => MODE7_A::INPUT,
2 => MODE7_A::INPUTPULL,
3 => MODE7_A::INPUTPULLFILTER,
4 => MODE7_A::PUSHPULL,
5 => MODE7_A::PUSHPULLDRIVE,
6 => MODE7_A::WIREDOR,
7 => MODE7_A::WIREDORPULLDOWN,
8 => MODE7_A::WIREDAND,
9 => MODE7_A::WIREDANDFILTER,
10 => MODE7_A::WIREDANDPULLUP,
11 => MODE7_A::WIREDANDPULLUPFILTER,
12 => MODE7_A::WIREDANDDRIVE,
13 => MODE7_A::WIREDANDDRIVEFILTER,
14 => MODE7_A::WIREDANDDRIVEPULLUP,
15 => MODE7_A::WIREDANDDRIVEPULLUPFILTER,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `DISABLED`"]
#[inline(always)]
pub fn is_disabled(&self) -> bool {
*self == MODE7_A::DISABLED
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == MODE7_A::INPUT
}
#[doc = "Checks if the value of the field is `INPUTPULL`"]
#[inline(always)]
pub fn is_inputpull(&self) -> bool {
*self == MODE7_A::INPUTPULL
}
#[doc = "Checks if the value of the field is `INPUTPULLFILTER`"]
#[inline(always)]
pub fn is_inputpullfilter(&self) -> bool {
*self == MODE7_A::INPUTPULLFILTER
}
#[doc = "Checks if the value of the field is `PUSHPULL`"]
#[inline(always)]
pub fn is_pushpull(&self) -> bool {
*self == MODE7_A::PUSHPULL
}
#[doc = "Checks if the value of the field is `PUSHPULLDRIVE`"]
#[inline(always)]
pub fn is_pushpulldrive(&self) -> bool {
*self == MODE7_A::PUSHPULLDRIVE
}
#[doc = "Checks if the value of the field is `WIREDOR`"]
#[inline(always)]
pub fn is_wiredor(&self) -> bool {
*self == MODE7_A::WIREDOR
}
#[doc = "Checks if the value of the field is `WIREDORPULLDOWN`"]
#[inline(always)]
pub fn is_wiredorpulldown(&self) -> bool {
*self == MODE7_A::WIREDORPULLDOWN
}
#[doc = "Checks if the value of the field is `WIREDAND`"]
#[inline(always)]
pub fn is_wiredand(&self) -> bool {
*self == MODE7_A::WIREDAND
}
#[doc = "Checks if the value of the field is `WIREDANDFILTER`"]
#[inline(always)]
pub fn is_wiredandfilter(&self) -> bool {
*self == MODE7_A::WIREDANDFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUP`"]
#[inline(always)]
pub fn is_wiredandpullup(&self) -> bool {
*self == MODE7_A::WIREDANDPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredandpullupfilter(&self) -> bool {
*self == MODE7_A::WIREDANDPULLUPFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVE`"]
#[inline(always)]
pub fn is_wiredanddrive(&self) -> bool {
*self == MODE7_A::WIREDANDDRIVE
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEFILTER`"]
#[inline(always)]
pub fn is_wiredanddrivefilter(&self) -> bool {
*self == MODE7_A::WIREDANDDRIVEFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEPULLUP`"]
#[inline(always)]
pub fn is_wiredanddrivepullup(&self) -> bool {
*self == MODE7_A::WIREDANDDRIVEPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDDRIVEPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredanddrivepullupfilter(&self) -> bool {
*self == MODE7_A::WIREDANDDRIVEPULLUPFILTER
}
}
#[doc = "Field `MODE7` writer - Pin 7 Mode"]
pub type MODE7_W<'a> = crate::FieldWriterSafe<'a, u32, PA_MODEL_SPEC, u8, MODE7_A, 4, 28>;
impl<'a> MODE7_W<'a> {
#[doc = "Input disabled. Pullup if DOUT is set."]
#[inline(always)]
pub fn disabled(self) -> &'a mut W {
self.variant(MODE7_A::DISABLED)
}
#[doc = "Input enabled. Filter if DOUT is set"]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(MODE7_A::INPUT)
}
#[doc = "Input enabled. DOUT determines pull direction"]
#[inline(always)]
pub fn inputpull(self) -> &'a mut W {
self.variant(MODE7_A::INPUTPULL)
}
#[doc = "Input enabled with filter. DOUT determines pull direction"]
#[inline(always)]
pub fn inputpullfilter(self) -> &'a mut W {
self.variant(MODE7_A::INPUTPULLFILTER)
}
#[doc = "Push-pull output"]
#[inline(always)]
pub fn pushpull(self) -> &'a mut W {
self.variant(MODE7_A::PUSHPULL)
}
#[doc = "Push-pull output with drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn pushpulldrive(self) -> &'a mut W {
self.variant(MODE7_A::PUSHPULLDRIVE)
}
#[doc = "Wired-or output"]
#[inline(always)]
pub fn wiredor(self) -> &'a mut W {
self.variant(MODE7_A::WIREDOR)
}
#[doc = "Wired-or output with pull-down"]
#[inline(always)]
pub fn wiredorpulldown(self) -> &'a mut W {
self.variant(MODE7_A::WIREDORPULLDOWN)
}
#[doc = "Open-drain output"]
#[inline(always)]
pub fn wiredand(self) -> &'a mut W {
self.variant(MODE7_A::WIREDAND)
}
#[doc = "Open-drain output with filter"]
#[inline(always)]
pub fn wiredandfilter(self) -> &'a mut W {
self.variant(MODE7_A::WIREDANDFILTER)
}
#[doc = "Open-drain output with pullup"]
#[inline(always)]
pub fn wiredandpullup(self) -> &'a mut W {
self.variant(MODE7_A::WIREDANDPULLUP)
}
#[doc = "Open-drain output with filter and pullup"]
#[inline(always)]
pub fn wiredandpullupfilter(self) -> &'a mut W {
self.variant(MODE7_A::WIREDANDPULLUPFILTER)
}
#[doc = "Open-drain output with drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrive(self) -> &'a mut W {
self.variant(MODE7_A::WIREDANDDRIVE)
}
#[doc = "Open-drain output with filter and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivefilter(self) -> &'a mut W {
self.variant(MODE7_A::WIREDANDDRIVEFILTER)
}
#[doc = "Open-drain output with pullup and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivepullup(self) -> &'a mut W {
self.variant(MODE7_A::WIREDANDDRIVEPULLUP)
}
#[doc = "Open-drain output with filter, pullup and drive-strength set by DRIVEMODE"]
#[inline(always)]
pub fn wiredanddrivepullupfilter(self) -> &'a mut W {
self.variant(MODE7_A::WIREDANDDRIVEPULLUPFILTER)
}
}
impl R {
#[doc = "Bits 0:3 - Pin 0 Mode"]
#[inline(always)]
pub fn mode0(&self) -> MODE0_R {
MODE0_R::new((self.bits & 0x0f) as u8)
}
#[doc = "Bits 4:7 - Pin 1 Mode"]
#[inline(always)]
pub fn mode1(&self) -> MODE1_R {
MODE1_R::new(((self.bits >> 4) & 0x0f) as u8)
}
#[doc = "Bits 8:11 - Pin 2 Mode"]
#[inline(always)]
pub fn mode2(&self) -> MODE2_R {
MODE2_R::new(((self.bits >> 8) & 0x0f) as u8)
}
#[doc = "Bits 12:15 - Pin 3 Mode"]
#[inline(always)]
pub fn mode3(&self) -> MODE3_R {
MODE3_R::new(((self.bits >> 12) & 0x0f) as u8)
}
#[doc = "Bits 16:19 - Pin 4 Mode"]
#[inline(always)]
pub fn mode4(&self) -> MODE4_R {
MODE4_R::new(((self.bits >> 16) & 0x0f) as u8)
}
#[doc = "Bits 20:23 - Pin 5 Mode"]
#[inline(always)]
pub fn mode5(&self) -> MODE5_R {
MODE5_R::new(((self.bits >> 20) & 0x0f) as u8)
}
#[doc = "Bits 24:27 - Pin 6 Mode"]
#[inline(always)]
pub fn mode6(&self) -> MODE6_R {
MODE6_R::new(((self.bits >> 24) & 0x0f) as u8)
}
#[doc = "Bits 28:31 - Pin 7 Mode"]
#[inline(always)]
pub fn mode7(&self) -> MODE7_R {
MODE7_R::new(((self.bits >> 28) & 0x0f) as u8)
}
}
impl W {
#[doc = "Bits 0:3 - Pin 0 Mode"]
#[inline(always)]
pub fn mode0(&mut self) -> MODE0_W {
MODE0_W::new(self)
}
#[doc = "Bits 4:7 - Pin 1 Mode"]
#[inline(always)]
pub fn mode1(&mut self) -> MODE1_W {
MODE1_W::new(self)
}
#[doc = "Bits 8:11 - Pin 2 Mode"]
#[inline(always)]
pub fn mode2(&mut self) -> MODE2_W {
MODE2_W::new(self)
}
#[doc = "Bits 12:15 - Pin 3 Mode"]
#[inline(always)]
pub fn mode3(&mut self) -> MODE3_W {
MODE3_W::new(self)
}
#[doc = "Bits 16:19 - Pin 4 Mode"]
#[inline(always)]
pub fn mode4(&mut self) -> MODE4_W {
MODE4_W::new(self)
}
#[doc = "Bits 20:23 - Pin 5 Mode"]
#[inline(always)]
pub fn mode5(&mut self) -> MODE5_W {
MODE5_W::new(self)
}
#[doc = "Bits 24:27 - Pin 6 Mode"]
#[inline(always)]
pub fn mode6(&mut self) -> MODE6_W {
MODE6_W::new(self)
}
#[doc = "Bits 28:31 - Pin 7 Mode"]
#[inline(always)]
pub fn mode7(&mut self) -> MODE7_W {
MODE7_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "Port Pin Mode Low Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [pa_model](index.html) module"]
pub struct PA_MODEL_SPEC;
impl crate::RegisterSpec for PA_MODEL_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [pa_model::R](R) reader structure"]
impl crate::Readable for PA_MODEL_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [pa_model::W](W) writer structure"]
impl crate::Writable for PA_MODEL_SPEC {
type Writer = W;
}
#[doc = "`reset()` method sets PA_MODEL to value 0"]
impl crate::Resettable for PA_MODEL_SPEC {
#[inline(always)]
fn reset_value() -> Self::Ux {
0
}
}