efm32pg23-pac 0.1.1

Peripheral access API for EFM32PG23 MCU (generated using svd2rust)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53

#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
    #[doc = "0x00 - A write access to any address in this area will be mapped to the TX FIFO (only for the payload). A read access to any address in this area will be mapped to the RX FIFO (only for the payload). Using an address range (16 x 32-bit) rather than one single address mapped to the FIFO allows using incremental bursts."]
    pub fifo: crate::Reg<fifo::FIFO_SPEC>,
    _reserved1: [u8; 0x3c],
    #[doc = "0x40 - TX Status register."]
    pub tx_status: crate::Reg<tx_status::TX_STATUS_SPEC>,
    #[doc = "0x44 - RX Status register."]
    pub rx_status: crate::Reg<rx_status::RX_STATUS_SPEC>,
    #[doc = "0x48 - TX Protection register."]
    pub tx_prot: crate::Reg<tx_prot::TX_PROT_SPEC>,
    #[doc = "0x4c - RX Protection register."]
    pub rx_prot: crate::Reg<rx_prot::RX_PROT_SPEC>,
    #[doc = "0x50 - A write access to this register will be mapped to the TX FIFO (only for header)."]
    pub tx_header: crate::Reg<tx_header::TX_HEADER_SPEC>,
    #[doc = "0x54 - A read access to this register will be mapped to the RX FIFO (only for the header)."]
    pub rx_header: crate::Reg<rx_header::RX_HEADER_SPEC>,
    #[doc = "0x58 - Configuration register."]
    pub configuration: crate::Reg<configuration::CONFIGURATION_SPEC>,
}
#[doc = "FIFO register accessor: an alias for `Reg<FIFO_SPEC>`"]
pub type FIFO = crate::Reg<fifo::FIFO_SPEC>;
#[doc = "A write access to any address in this area will be mapped to the TX FIFO (only for the payload). A read access to any address in this area will be mapped to the RX FIFO (only for the payload). Using an address range (16 x 32-bit) rather than one single address mapped to the FIFO allows using incremental bursts."]
pub mod fifo;
#[doc = "TX_STATUS register accessor: an alias for `Reg<TX_STATUS_SPEC>`"]
pub type TX_STATUS = crate::Reg<tx_status::TX_STATUS_SPEC>;
#[doc = "TX Status register."]
pub mod tx_status;
#[doc = "RX_STATUS register accessor: an alias for `Reg<RX_STATUS_SPEC>`"]
pub type RX_STATUS = crate::Reg<rx_status::RX_STATUS_SPEC>;
#[doc = "RX Status register."]
pub mod rx_status;
#[doc = "TX_PROT register accessor: an alias for `Reg<TX_PROT_SPEC>`"]
pub type TX_PROT = crate::Reg<tx_prot::TX_PROT_SPEC>;
#[doc = "TX Protection register."]
pub mod tx_prot;
#[doc = "RX_PROT register accessor: an alias for `Reg<RX_PROT_SPEC>`"]
pub type RX_PROT = crate::Reg<rx_prot::RX_PROT_SPEC>;
#[doc = "RX Protection register."]
pub mod rx_prot;
#[doc = "TX_HEADER register accessor: an alias for `Reg<TX_HEADER_SPEC>`"]
pub type TX_HEADER = crate::Reg<tx_header::TX_HEADER_SPEC>;
#[doc = "A write access to this register will be mapped to the TX FIFO (only for header)."]
pub mod tx_header;
#[doc = "RX_HEADER register accessor: an alias for `Reg<RX_HEADER_SPEC>`"]
pub type RX_HEADER = crate::Reg<rx_header::RX_HEADER_SPEC>;
#[doc = "A read access to this register will be mapped to the RX FIFO (only for the header)."]
pub mod rx_header;
#[doc = "CONFIGURATION register accessor: an alias for `Reg<CONFIGURATION_SPEC>`"]
pub type CONFIGURATION = crate::Reg<configuration::CONFIGURATION_SPEC>;
#[doc = "Configuration register."]
pub mod configuration;