#[doc = "Register `PORTA_MODEH` reader"]
pub struct R(crate::R<PORTA_MODEH_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<PORTA_MODEH_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<PORTA_MODEH_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<PORTA_MODEH_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `PORTA_MODEH` writer"]
pub struct W(crate::W<PORTA_MODEH_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<PORTA_MODEH_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<PORTA_MODEH_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<PORTA_MODEH_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `MODE0` reader - MODE n"]
pub type MODE0_R = crate::FieldReader<u8, MODE0_A>;
#[doc = "MODE n\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum MODE0_A {
#[doc = "0: Input disabled. Pullup if DOUT is set."]
DISABLED = 0,
#[doc = "1: Input enabled. Filter if DOUT is set."]
INPUT = 1,
#[doc = "2: Input enabled. DOUT determines pull direction."]
INPUTPULL = 2,
#[doc = "3: Input enabled with filter. DOUT determines pull direction."]
INPUTPULLFILTER = 3,
#[doc = "4: Push-pull output."]
PUSHPULL = 4,
#[doc = "5: Push-pull using alternate control."]
PUSHPULLALT = 5,
#[doc = "6: Wired-or output."]
WIREDOR = 6,
#[doc = "7: Wired-or output with pull-down."]
WIREDORPULLDOWN = 7,
#[doc = "8: Open-drain output."]
WIREDAND = 8,
#[doc = "9: Open-drain output with filter."]
WIREDANDFILTER = 9,
#[doc = "10: Open-drain output with pullup."]
WIREDANDPULLUP = 10,
#[doc = "11: Open-drain output with filter and pullup."]
WIREDANDPULLUPFILTER = 11,
#[doc = "12: Open-drain output using alternate control."]
WIREDANDALT = 12,
#[doc = "13: Open-drain output using alternate control with filter."]
WIREDANDALTFILTER = 13,
#[doc = "14: Open-drain output using alternate control with pullup."]
WIREDANDALTPULLUP = 14,
#[doc = "15: Open-drain output using alternate control with filter and pullup."]
WIREDANDALTPULLUPFILTER = 15,
}
impl From<MODE0_A> for u8 {
#[inline(always)]
fn from(variant: MODE0_A) -> Self {
variant as _
}
}
impl MODE0_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> MODE0_A {
match self.bits {
0 => MODE0_A::DISABLED,
1 => MODE0_A::INPUT,
2 => MODE0_A::INPUTPULL,
3 => MODE0_A::INPUTPULLFILTER,
4 => MODE0_A::PUSHPULL,
5 => MODE0_A::PUSHPULLALT,
6 => MODE0_A::WIREDOR,
7 => MODE0_A::WIREDORPULLDOWN,
8 => MODE0_A::WIREDAND,
9 => MODE0_A::WIREDANDFILTER,
10 => MODE0_A::WIREDANDPULLUP,
11 => MODE0_A::WIREDANDPULLUPFILTER,
12 => MODE0_A::WIREDANDALT,
13 => MODE0_A::WIREDANDALTFILTER,
14 => MODE0_A::WIREDANDALTPULLUP,
15 => MODE0_A::WIREDANDALTPULLUPFILTER,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `DISABLED`"]
#[inline(always)]
pub fn is_disabled(&self) -> bool {
*self == MODE0_A::DISABLED
}
#[doc = "Checks if the value of the field is `INPUT`"]
#[inline(always)]
pub fn is_input(&self) -> bool {
*self == MODE0_A::INPUT
}
#[doc = "Checks if the value of the field is `INPUTPULL`"]
#[inline(always)]
pub fn is_inputpull(&self) -> bool {
*self == MODE0_A::INPUTPULL
}
#[doc = "Checks if the value of the field is `INPUTPULLFILTER`"]
#[inline(always)]
pub fn is_inputpullfilter(&self) -> bool {
*self == MODE0_A::INPUTPULLFILTER
}
#[doc = "Checks if the value of the field is `PUSHPULL`"]
#[inline(always)]
pub fn is_pushpull(&self) -> bool {
*self == MODE0_A::PUSHPULL
}
#[doc = "Checks if the value of the field is `PUSHPULLALT`"]
#[inline(always)]
pub fn is_pushpullalt(&self) -> bool {
*self == MODE0_A::PUSHPULLALT
}
#[doc = "Checks if the value of the field is `WIREDOR`"]
#[inline(always)]
pub fn is_wiredor(&self) -> bool {
*self == MODE0_A::WIREDOR
}
#[doc = "Checks if the value of the field is `WIREDORPULLDOWN`"]
#[inline(always)]
pub fn is_wiredorpulldown(&self) -> bool {
*self == MODE0_A::WIREDORPULLDOWN
}
#[doc = "Checks if the value of the field is `WIREDAND`"]
#[inline(always)]
pub fn is_wiredand(&self) -> bool {
*self == MODE0_A::WIREDAND
}
#[doc = "Checks if the value of the field is `WIREDANDFILTER`"]
#[inline(always)]
pub fn is_wiredandfilter(&self) -> bool {
*self == MODE0_A::WIREDANDFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUP`"]
#[inline(always)]
pub fn is_wiredandpullup(&self) -> bool {
*self == MODE0_A::WIREDANDPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredandpullupfilter(&self) -> bool {
*self == MODE0_A::WIREDANDPULLUPFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDALT`"]
#[inline(always)]
pub fn is_wiredandalt(&self) -> bool {
*self == MODE0_A::WIREDANDALT
}
#[doc = "Checks if the value of the field is `WIREDANDALTFILTER`"]
#[inline(always)]
pub fn is_wiredandaltfilter(&self) -> bool {
*self == MODE0_A::WIREDANDALTFILTER
}
#[doc = "Checks if the value of the field is `WIREDANDALTPULLUP`"]
#[inline(always)]
pub fn is_wiredandaltpullup(&self) -> bool {
*self == MODE0_A::WIREDANDALTPULLUP
}
#[doc = "Checks if the value of the field is `WIREDANDALTPULLUPFILTER`"]
#[inline(always)]
pub fn is_wiredandaltpullupfilter(&self) -> bool {
*self == MODE0_A::WIREDANDALTPULLUPFILTER
}
}
#[doc = "Field `MODE0` writer - MODE n"]
pub type MODE0_W<'a, const O: u8> =
crate::FieldWriterSafe<'a, u32, PORTA_MODEH_SPEC, u8, MODE0_A, 4, O>;
impl<'a, const O: u8> MODE0_W<'a, O> {
#[doc = "Input disabled. Pullup if DOUT is set."]
#[inline(always)]
pub fn disabled(self) -> &'a mut W {
self.variant(MODE0_A::DISABLED)
}
#[doc = "Input enabled. Filter if DOUT is set."]
#[inline(always)]
pub fn input(self) -> &'a mut W {
self.variant(MODE0_A::INPUT)
}
#[doc = "Input enabled. DOUT determines pull direction."]
#[inline(always)]
pub fn inputpull(self) -> &'a mut W {
self.variant(MODE0_A::INPUTPULL)
}
#[doc = "Input enabled with filter. DOUT determines pull direction."]
#[inline(always)]
pub fn inputpullfilter(self) -> &'a mut W {
self.variant(MODE0_A::INPUTPULLFILTER)
}
#[doc = "Push-pull output."]
#[inline(always)]
pub fn pushpull(self) -> &'a mut W {
self.variant(MODE0_A::PUSHPULL)
}
#[doc = "Push-pull using alternate control."]
#[inline(always)]
pub fn pushpullalt(self) -> &'a mut W {
self.variant(MODE0_A::PUSHPULLALT)
}
#[doc = "Wired-or output."]
#[inline(always)]
pub fn wiredor(self) -> &'a mut W {
self.variant(MODE0_A::WIREDOR)
}
#[doc = "Wired-or output with pull-down."]
#[inline(always)]
pub fn wiredorpulldown(self) -> &'a mut W {
self.variant(MODE0_A::WIREDORPULLDOWN)
}
#[doc = "Open-drain output."]
#[inline(always)]
pub fn wiredand(self) -> &'a mut W {
self.variant(MODE0_A::WIREDAND)
}
#[doc = "Open-drain output with filter."]
#[inline(always)]
pub fn wiredandfilter(self) -> &'a mut W {
self.variant(MODE0_A::WIREDANDFILTER)
}
#[doc = "Open-drain output with pullup."]
#[inline(always)]
pub fn wiredandpullup(self) -> &'a mut W {
self.variant(MODE0_A::WIREDANDPULLUP)
}
#[doc = "Open-drain output with filter and pullup."]
#[inline(always)]
pub fn wiredandpullupfilter(self) -> &'a mut W {
self.variant(MODE0_A::WIREDANDPULLUPFILTER)
}
#[doc = "Open-drain output using alternate control."]
#[inline(always)]
pub fn wiredandalt(self) -> &'a mut W {
self.variant(MODE0_A::WIREDANDALT)
}
#[doc = "Open-drain output using alternate control with filter."]
#[inline(always)]
pub fn wiredandaltfilter(self) -> &'a mut W {
self.variant(MODE0_A::WIREDANDALTFILTER)
}
#[doc = "Open-drain output using alternate control with pullup."]
#[inline(always)]
pub fn wiredandaltpullup(self) -> &'a mut W {
self.variant(MODE0_A::WIREDANDALTPULLUP)
}
#[doc = "Open-drain output using alternate control with filter and pullup."]
#[inline(always)]
pub fn wiredandaltpullupfilter(self) -> &'a mut W {
self.variant(MODE0_A::WIREDANDALTPULLUPFILTER)
}
}
impl R {
#[doc = "Bits 0:3 - MODE n"]
#[inline(always)]
pub fn mode0(&self) -> MODE0_R {
MODE0_R::new((self.bits & 0x0f) as u8)
}
}
impl W {
#[doc = "Bits 0:3 - MODE n"]
#[inline(always)]
#[must_use]
pub fn mode0(&mut self) -> MODE0_W<0> {
MODE0_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "mode high\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [porta_modeh](index.html) module"]
pub struct PORTA_MODEH_SPEC;
impl crate::RegisterSpec for PORTA_MODEH_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [porta_modeh::R](R) reader structure"]
impl crate::Readable for PORTA_MODEH_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [porta_modeh::W](W) writer structure"]
impl crate::Writable for PORTA_MODEH_SPEC {
type Writer = W;
const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets PORTA_MODEH to value 0"]
impl crate::Resettable for PORTA_MODEH_SPEC {
const RESET_VALUE: Self::Ux = 0;
}