#[doc = "Register `PUSHLEN` reader"]
pub struct R(crate::R<PUSHLEN_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<PUSHLEN_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<PUSHLEN_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<PUSHLEN_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `PUSHLEN` writer"]
pub struct W(crate::W<PUSHLEN_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<PUSHLEN_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<PUSHLEN_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<PUSHLEN_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `LENGTH` reader - Start address of data block"]
pub type LENGTH_R = crate::FieldReader<u32, u32>;
#[doc = "Field `LENGTH` writer - Start address of data block"]
pub type LENGTH_W<'a> = crate::FieldWriter<'a, u32, PUSHLEN_SPEC, u32, u32, 28, 0>;
#[doc = "Field `CONSTADDR` reader - Constant address"]
pub type CONSTADDR_R = crate::BitReader<bool>;
#[doc = "Field `CONSTADDR` writer - Constant address"]
pub type CONSTADDR_W<'a> = crate::BitWriter<'a, u32, PUSHLEN_SPEC, bool, 28>;
#[doc = "Field `REALIGN` reader - Realign length"]
pub type REALIGN_R = crate::BitReader<bool>;
#[doc = "Field `REALIGN` writer - Realign length"]
pub type REALIGN_W<'a> = crate::BitWriter<'a, u32, PUSHLEN_SPEC, bool, 29>;
#[doc = "Field `DISCARD` reader - Discard data"]
pub type DISCARD_R = crate::BitReader<bool>;
#[doc = "Field `DISCARD` writer - Discard data"]
pub type DISCARD_W<'a> = crate::BitWriter<'a, u32, PUSHLEN_SPEC, bool, 30>;
impl R {
#[doc = "Bits 0:27 - Start address of data block"]
#[inline(always)]
pub fn length(&self) -> LENGTH_R {
LENGTH_R::new((self.bits & 0x0fff_ffff) as u32)
}
#[doc = "Bit 28 - Constant address"]
#[inline(always)]
pub fn constaddr(&self) -> CONSTADDR_R {
CONSTADDR_R::new(((self.bits >> 28) & 1) != 0)
}
#[doc = "Bit 29 - Realign length"]
#[inline(always)]
pub fn realign(&self) -> REALIGN_R {
REALIGN_R::new(((self.bits >> 29) & 1) != 0)
}
#[doc = "Bit 30 - Discard data"]
#[inline(always)]
pub fn discard(&self) -> DISCARD_R {
DISCARD_R::new(((self.bits >> 30) & 1) != 0)
}
}
impl W {
#[doc = "Bits 0:27 - Start address of data block"]
#[inline(always)]
pub fn length(&mut self) -> LENGTH_W {
LENGTH_W::new(self)
}
#[doc = "Bit 28 - Constant address"]
#[inline(always)]
pub fn constaddr(&mut self) -> CONSTADDR_W {
CONSTADDR_W::new(self)
}
#[doc = "Bit 29 - Realign length"]
#[inline(always)]
pub fn realign(&mut self) -> REALIGN_W {
REALIGN_W::new(self)
}
#[doc = "Bit 30 - Discard data"]
#[inline(always)]
pub fn discard(&mut self) -> DISCARD_W {
DISCARD_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "Pusher: Length of data block. In direct mode, this register is written by the software. In scatter-gather mode, this register is not used.\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [pushlen](index.html) module"]
pub struct PUSHLEN_SPEC;
impl crate::RegisterSpec for PUSHLEN_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [pushlen::R](R) reader structure"]
impl crate::Readable for PUSHLEN_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [pushlen::W](W) writer structure"]
impl crate::Writable for PUSHLEN_SPEC {
type Writer = W;
}
#[doc = "`reset()` method sets PUSHLEN to value 0"]
impl crate::Resettable for PUSHLEN_SPEC {
#[inline(always)]
fn reset_value() -> Self::Ux {
0
}
}