e310x 0.12.0

With svd2rust generated peripherals for Freedom E310 MCU's.
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174

#[repr(C)]
#[doc = "Register block"]
pub struct RegisterBlock {
    lock: Lock,
    clock: Clock,
    output_en: OutputEn,
    select: Select,
    write_en: WriteEn,
    mode: Mode,
    mrr: Mrr,
    mpp: Mpp,
    vrren: Vrren,
    vppen: Vppen,
    addr: Addr,
    data_in: DataIn,
    data_out: DataOut,
    rsctrl: Rsctrl,
}
impl RegisterBlock {
    #[doc = "0x00 - Programmed-I/O lock register"]
    #[inline(always)]
    pub const fn lock(&self) -> &Lock {
        &self.lock
    }
    #[doc = "0x04 - OTP device clock signal"]
    #[inline(always)]
    pub const fn clock(&self) -> &Clock {
        &self.clock
    }
    #[doc = "0x08 - OTP device output-enable signal"]
    #[inline(always)]
    pub const fn output_en(&self) -> &OutputEn {
        &self.output_en
    }
    #[doc = "0x0c - OTP device chip-select signal"]
    #[inline(always)]
    pub const fn select(&self) -> &Select {
        &self.select
    }
    #[doc = "0x10 - OTP device write-enable signal"]
    #[inline(always)]
    pub const fn write_en(&self) -> &WriteEn {
        &self.write_en
    }
    #[doc = "0x14 - OTP device mode register"]
    #[inline(always)]
    pub const fn mode(&self) -> &Mode {
        &self.mode
    }
    #[doc = "0x18 - OTP read-voltage regulator control"]
    #[inline(always)]
    pub const fn mrr(&self) -> &Mrr {
        &self.mrr
    }
    #[doc = "0x1c - OTP write-voltage charge pump control"]
    #[inline(always)]
    pub const fn mpp(&self) -> &Mpp {
        &self.mpp
    }
    #[doc = "0x20 - OTP read-voltage enable"]
    #[inline(always)]
    pub const fn vrren(&self) -> &Vrren {
        &self.vrren
    }
    #[doc = "0x24 - OTP write-voltage enable"]
    #[inline(always)]
    pub const fn vppen(&self) -> &Vppen {
        &self.vppen
    }
    #[doc = "0x28 - OTP device address"]
    #[inline(always)]
    pub const fn addr(&self) -> &Addr {
        &self.addr
    }
    #[doc = "0x2c - OTP device data input"]
    #[inline(always)]
    pub const fn data_in(&self) -> &DataIn {
        &self.data_in
    }
    #[doc = "0x30 - OTP device data output"]
    #[inline(always)]
    pub const fn data_out(&self) -> &DataOut {
        &self.data_out
    }
    #[doc = "0x34 - OTP read sequencer control"]
    #[inline(always)]
    pub const fn rsctrl(&self) -> &Rsctrl {
        &self.rsctrl
    }
}
#[doc = "lock (rw) register accessor: Programmed-I/O lock register\n\nYou can [`read`](crate::Reg::read) this register and get [`lock::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`lock::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lock`]
module"]
#[doc(alias = "lock")]
pub type Lock = crate::Reg<lock::LockSpec>;
#[doc = "Programmed-I/O lock register"]
pub mod lock;
#[doc = "clock (rw) register accessor: OTP device clock signal\n\nYou can [`read`](crate::Reg::read) this register and get [`clock::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`clock::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@clock`]
module"]
#[doc(alias = "clock")]
pub type Clock = crate::Reg<clock::ClockSpec>;
#[doc = "OTP device clock signal"]
pub mod clock;
#[doc = "output_en (rw) register accessor: OTP device output-enable signal\n\nYou can [`read`](crate::Reg::read) this register and get [`output_en::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`output_en::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@output_en`]
module"]
#[doc(alias = "output_en")]
pub type OutputEn = crate::Reg<output_en::OutputEnSpec>;
#[doc = "OTP device output-enable signal"]
pub mod output_en;
#[doc = "select (rw) register accessor: OTP device chip-select signal\n\nYou can [`read`](crate::Reg::read) this register and get [`select::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`select::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@select`]
module"]
#[doc(alias = "select")]
pub type Select = crate::Reg<select::SelectSpec>;
#[doc = "OTP device chip-select signal"]
pub mod select;
#[doc = "write_en (rw) register accessor: OTP device write-enable signal\n\nYou can [`read`](crate::Reg::read) this register and get [`write_en::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`write_en::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@write_en`]
module"]
#[doc(alias = "write_en")]
pub type WriteEn = crate::Reg<write_en::WriteEnSpec>;
#[doc = "OTP device write-enable signal"]
pub mod write_en;
#[doc = "mode (rw) register accessor: OTP device mode register\n\nYou can [`read`](crate::Reg::read) this register and get [`mode::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`mode::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@mode`]
module"]
#[doc(alias = "mode")]
pub type Mode = crate::Reg<mode::ModeSpec>;
#[doc = "OTP device mode register"]
pub mod mode;
#[doc = "mrr (rw) register accessor: OTP read-voltage regulator control\n\nYou can [`read`](crate::Reg::read) this register and get [`mrr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`mrr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@mrr`]
module"]
#[doc(alias = "mrr")]
pub type Mrr = crate::Reg<mrr::MrrSpec>;
#[doc = "OTP read-voltage regulator control"]
pub mod mrr;
#[doc = "mpp (rw) register accessor: OTP write-voltage charge pump control\n\nYou can [`read`](crate::Reg::read) this register and get [`mpp::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`mpp::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@mpp`]
module"]
#[doc(alias = "mpp")]
pub type Mpp = crate::Reg<mpp::MppSpec>;
#[doc = "OTP write-voltage charge pump control"]
pub mod mpp;
#[doc = "vrren (rw) register accessor: OTP read-voltage enable\n\nYou can [`read`](crate::Reg::read) this register and get [`vrren::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`vrren::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@vrren`]
module"]
#[doc(alias = "vrren")]
pub type Vrren = crate::Reg<vrren::VrrenSpec>;
#[doc = "OTP read-voltage enable"]
pub mod vrren;
#[doc = "vppen (rw) register accessor: OTP write-voltage enable\n\nYou can [`read`](crate::Reg::read) this register and get [`vppen::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`vppen::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@vppen`]
module"]
#[doc(alias = "vppen")]
pub type Vppen = crate::Reg<vppen::VppenSpec>;
#[doc = "OTP write-voltage enable"]
pub mod vppen;
#[doc = "addr (rw) register accessor: OTP device address\n\nYou can [`read`](crate::Reg::read) this register and get [`addr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`addr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@addr`]
module"]
#[doc(alias = "addr")]
pub type Addr = crate::Reg<addr::AddrSpec>;
#[doc = "OTP device address"]
pub mod addr;
#[doc = "data_in (rw) register accessor: OTP device data input\n\nYou can [`read`](crate::Reg::read) this register and get [`data_in::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data_in::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data_in`]
module"]
#[doc(alias = "data_in")]
pub type DataIn = crate::Reg<data_in::DataInSpec>;
#[doc = "OTP device data input"]
pub mod data_in;
#[doc = "data_out (rw) register accessor: OTP device data output\n\nYou can [`read`](crate::Reg::read) this register and get [`data_out::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data_out::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data_out`]
module"]
#[doc(alias = "data_out")]
pub type DataOut = crate::Reg<data_out::DataOutSpec>;
#[doc = "OTP device data output"]
pub mod data_out;
#[doc = "rsctrl (rw) register accessor: OTP read sequencer control\n\nYou can [`read`](crate::Reg::read) this register and get [`rsctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rsctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rsctrl`]
module"]
#[doc(alias = "rsctrl")]
pub type Rsctrl = crate::Reg<rsctrl::RsctrlSpec>;
#[doc = "OTP read sequencer control"]
pub mod rsctrl;