e-utils 0.4.19

use super::{tables, PAD_BYTE};
use super::{Config, STANDARD};
use std::fmt;

/// decode
pub fn decode<T: AsRef<[u8]>>(input: T) -> Result<Vec<u8>, DecodeError> {
  decode_config(input, STANDARD)
}
/// decode_config
pub fn decode_config<T: AsRef<[u8]>>(input: T, config: Config) -> Result<Vec<u8>, DecodeError> {
  let mut buffer = Vec::<u8>::with_capacity(input.as_ref().len() * 4 / 3);
  decode_config_buf(input, config, &mut buffer).map(|_| buffer)
}

/// DecodeError
#[derive(Clone, Debug, PartialEq, Eq)]
pub enum DecodeError {
  /// An invalid byte was found in the input. The offset and offending byte are provided.
  InvalidByte(usize, u8),
  /// The length of the input is invalid.
  /// A typical cause of this is stray trailing whitespace or other separator bytes.
  /// In the case where excess trailing bytes have produced an invalid length *and* the last byte
  /// is also an invalid base64 symbol (as would be the case for whitespace, etc), `InvalidByte`
  /// will be emitted instead of `InvalidLength` to make the issue easier to debug.
  InvalidLength,
  /// The last non-padding input symbol's encoded 6 bits have nonzero bits that will be discarded.
  /// This is indicative of corrupted or truncated Base64.
  /// Unlike InvalidByte, which reports symbols that aren't in the alphabet, this error is for
  /// symbols that are in the alphabet but represent nonsensical encodings.
  InvalidLastSymbol(usize, u8),
}

impl fmt::Display for DecodeError {
  fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
    match *self {
      DecodeError::InvalidByte(index, byte) => {
        write!(f, "Invalid byte {}, offset {}.", byte, index)
      }
      DecodeError::InvalidLength => write!(f, "Encoded text cannot have a 6-bit remainder."),
      DecodeError::InvalidLastSymbol(index, byte) => {
        write!(f, "Invalid last symbol {}, offset {}.", byte, index)
      }
    }
  }
}
/// decode_config_buf
pub fn decode_config_buf<T: AsRef<[u8]>>(
  input: T,
  config: Config,
  buffer: &mut Vec<u8>,
) -> Result<(), DecodeError> {
  let input_bytes = input.as_ref();

  let starting_output_len = buffer.len();

  let num_chunks = num_chunks(input_bytes);
  let decoded_len_estimate = num_chunks
    .checked_mul(DECODED_CHUNK_LEN)
    .and_then(|p| p.checked_add(starting_output_len))
    .expect("Overflow when calculating output buffer length");
  buffer.resize(decoded_len_estimate, 0);

  let bytes_written;
  {
    let buffer_slice = &mut buffer.as_mut_slice()[starting_output_len..];
    bytes_written = decode_helper(input_bytes, num_chunks, config, buffer_slice)?;
  }

  buffer.truncate(starting_output_len + bytes_written);

  Ok(())
}
// decode logic operates on chunks of 8 input bytes without padding
const INPUT_CHUNK_LEN: usize = 8;
const DECODED_CHUNK_LEN: usize = 6;
/// Return the number of input chunks (including a possibly partial final chunk) in the input
fn num_chunks(input: &[u8]) -> usize {
  input
    .len()
    .checked_add(INPUT_CHUNK_LEN - 1)
    .expect("Overflow when calculating number of chunks in input")
    / INPUT_CHUNK_LEN
}
// we read a u64 and write a u64, but a u64 of input only yields 6 bytes of output, so the last
// 2 bytes of any output u64 should not be counted as written to (but must be available in a
// slice).
const DECODED_CHUNK_SUFFIX: usize = 2;
// how many u64's of input to handle at a time
const CHUNKS_PER_FAST_LOOP_BLOCK: usize = 4;
const INPUT_BLOCK_LEN: usize = CHUNKS_PER_FAST_LOOP_BLOCK * INPUT_CHUNK_LEN;
// includes the trailing 2 bytes for the final u64 write
const DECODED_BLOCK_LEN: usize =
  CHUNKS_PER_FAST_LOOP_BLOCK * DECODED_CHUNK_LEN + DECODED_CHUNK_SUFFIX;

/// Helper to avoid duplicating num_chunks calculation, which is costly on short inputs.
/// Returns the number of bytes written, or an error.
// We're on the fragile edge of compiler heuristics here. If this is not inlined, slow. If this is
// inlined(always), a different slow. plain ol' inline makes the benchmarks happiest at the moment,
// but this is fragile and the best setting changes with only minor code modifications.
#[inline]
fn decode_helper(
  input: &[u8],
  num_chunks: usize,
  config: Config,
  output: &mut [u8],
) -> Result<usize, DecodeError> {
  let char_set = config.char_set;
  let decode_table = char_set.decode_table();

  let remainder_len = input.len() % INPUT_CHUNK_LEN;

  // Because the fast decode loop writes in groups of 8 bytes (unrolled to
  // CHUNKS_PER_FAST_LOOP_BLOCK times 8 bytes, where possible) and outputs 8 bytes at a time (of
  // which only 6 are valid data), we need to be sure that we stop using the fast decode loop
  // soon enough that there will always be 2 more bytes of valid data written after that loop.
  let trailing_bytes_to_skip = match remainder_len {
    // if input is a multiple of the chunk size, ignore the last chunk as it may have padding,
    // and the fast decode logic cannot handle padding
    0 => INPUT_CHUNK_LEN,
    // 1 and 5 trailing bytes are illegal: can't decode 6 bits of input into a byte
    1 | 5 => {
      // trailing whitespace is so common that it's worth it to check the last byte to
      // possibly return a better error message
      if let Some(b) = input.last() {
        if *b != PAD_BYTE && decode_table[*b as usize] == tables::INVALID_VALUE {
          return Err(DecodeError::InvalidByte(input.len() - 1, *b));
        }
      }

      return Err(DecodeError::InvalidLength);
    }
    // This will decode to one output byte, which isn't enough to overwrite the 2 extra bytes
    // written by the fast decode loop. So, we have to ignore both these 2 bytes and the
    // previous chunk.
    2 => INPUT_CHUNK_LEN + 2,
    // If this is 3 unpadded chars, then it would actually decode to 2 bytes. However, if this
    // is an erroneous 2 chars + 1 pad char that would decode to 1 byte, then it should fail
    // with an error, not panic from going past the bounds of the output slice, so we let it
    // use stage 3 + 4.
    3 => INPUT_CHUNK_LEN + 3,
    // This can also decode to one output byte because it may be 2 input chars + 2 padding
    // chars, which would decode to 1 byte.
    4 => INPUT_CHUNK_LEN + 4,
    // Everything else is a legal decode len (given that we don't require padding), and will
    // decode to at least 2 bytes of output.
    _ => remainder_len,
  };

  // rounded up to include partial chunks
  let mut remaining_chunks = num_chunks;

  let mut input_index = 0;
  let mut output_index = 0;

  {
    let length_of_fast_decode_chunks = input.len().saturating_sub(trailing_bytes_to_skip);

    // Fast loop, stage 1
    // manual unroll to CHUNKS_PER_FAST_LOOP_BLOCK of u64s to amortize slice bounds checks
    if let Some(max_start_index) = length_of_fast_decode_chunks.checked_sub(INPUT_BLOCK_LEN) {
      while input_index <= max_start_index {
        let input_slice = &input[input_index..(input_index + INPUT_BLOCK_LEN)];
        let output_slice = &mut output[output_index..(output_index + DECODED_BLOCK_LEN)];

        decode_chunk(
          &input_slice[0..],
          input_index,
          decode_table,
          &mut output_slice[0..],
        )?;
        decode_chunk(
          &input_slice[8..],
          input_index + 8,
          decode_table,
          &mut output_slice[6..],
        )?;
        decode_chunk(
          &input_slice[16..],
          input_index + 16,
          decode_table,
          &mut output_slice[12..],
        )?;
        decode_chunk(
          &input_slice[24..],
          input_index + 24,
          decode_table,
          &mut output_slice[18..],
        )?;

        input_index += INPUT_BLOCK_LEN;
        output_index += DECODED_BLOCK_LEN - DECODED_CHUNK_SUFFIX;
        remaining_chunks -= CHUNKS_PER_FAST_LOOP_BLOCK;
      }
    }

    // Fast loop, stage 2 (aka still pretty fast loop)
    // 8 bytes at a time for whatever we didn't do in stage 1.
    if let Some(max_start_index) = length_of_fast_decode_chunks.checked_sub(INPUT_CHUNK_LEN) {
      while input_index < max_start_index {
        decode_chunk(
          &input[input_index..(input_index + INPUT_CHUNK_LEN)],
          input_index,
          decode_table,
          &mut output[output_index..(output_index + DECODED_CHUNK_LEN + DECODED_CHUNK_SUFFIX)],
        )?;

        output_index += DECODED_CHUNK_LEN;
        input_index += INPUT_CHUNK_LEN;
        remaining_chunks -= 1;
      }
    }
  }

  // Stage 3
  // If input length was such that a chunk had to be deferred until after the fast loop
  // because decoding it would have produced 2 trailing bytes that wouldn't then be
  // overwritten, we decode that chunk here. This way is slower but doesn't write the 2
  // trailing bytes.
  // However, we still need to avoid the last chunk (partial or complete) because it could
  // have padding, so we always do 1 fewer to avoid the last chunk.
  for _ in 1..remaining_chunks {
    decode_chunk_precise(
      &input[input_index..],
      input_index,
      decode_table,
      &mut output[output_index..(output_index + DECODED_CHUNK_LEN)],
    )?;

    input_index += INPUT_CHUNK_LEN;
    output_index += DECODED_CHUNK_LEN;
  }

  // always have one more (possibly partial) block of 8 input
  debug_assert!(input.len() - input_index > 1 || input.is_empty());
  debug_assert!(input.len() - input_index <= 8);

  // Stage 4
  // Finally, decode any leftovers that aren't a complete input block of 8 bytes.
  // Use a u64 as a stack-resident 8 byte buffer.
  let mut leftover_bits: u64 = 0;
  let mut morsels_in_leftover = 0;
  let mut padding_bytes = 0;
  let mut first_padding_index: usize = 0;
  let mut last_symbol = 0_u8;
  let start_of_leftovers = input_index;
  for (i, b) in input[start_of_leftovers..].iter().enumerate() {
    // '=' padding
    if *b == PAD_BYTE {
      // There can be bad padding in a few ways:
      // 1 - Padding with non-padding characters after it
      // 2 - Padding after zero or one non-padding characters before it
      //     in the current quad.
      // 3 - More than two characters of padding. If 3 or 4 padding chars
      //     are in the same quad, that implies it will be caught by #2.
      //     If it spreads from one quad to another, it will be caught by
      //     #2 in the second quad.

      if i % 4 < 2 {
        // Check for case #2.
        let bad_padding_index = start_of_leftovers
          + if padding_bytes > 0 {
            // If we've already seen padding, report the first padding index.
            // This is to be consistent with the faster logic above: it will report an
            // error on the first padding character (since it doesn't expect to see
            // anything but actual encoded data).
            first_padding_index
          } else {
            // haven't seen padding before, just use where we are now
            i
          };
        return Err(DecodeError::InvalidByte(bad_padding_index, *b));
      }

      if padding_bytes == 0 {
        first_padding_index = i;
      }

      padding_bytes += 1;
      continue;
    }

    // Check for case #1.
    // To make '=' handling consistent with the main loop, don't allow
    // non-suffix '=' in trailing chunk either. Report error as first
    // erroneous padding.
    if padding_bytes > 0 {
      return Err(DecodeError::InvalidByte(
        start_of_leftovers + first_padding_index,
        PAD_BYTE,
      ));
    }
    last_symbol = *b;

    // can use up to 8 * 6 = 48 bits of the u64, if last chunk has no padding.
    // To minimize shifts, pack the leftovers from left to right.
    let shift = 64 - (morsels_in_leftover + 1) * 6;
    // tables are all 256 elements, lookup with a u8 index always succeeds
    let morsel = decode_table[*b as usize];
    if morsel == tables::INVALID_VALUE {
      return Err(DecodeError::InvalidByte(start_of_leftovers + i, *b));
    }

    leftover_bits |= (morsel as u64) << shift;
    morsels_in_leftover += 1;
  }

  let leftover_bits_ready_to_append = match morsels_in_leftover {
    0 => 0,
    2 => 8,
    3 => 16,
    4 => 24,
    6 => 32,
    7 => 40,
    8 => 48,
    _ => unreachable!(
      "Impossible: must only have 0 to 8 input bytes in last chunk, with no invalid lengths"
    ),
  };

  // if there are bits set outside the bits we care about, last symbol encodes trailing bits that
  // will not be included in the output
  let mask = !0 >> leftover_bits_ready_to_append;
  if !config.decode_allow_trailing_bits && (leftover_bits & mask) != 0 {
    // last morsel is at `morsels_in_leftover` - 1
    return Err(DecodeError::InvalidLastSymbol(
      start_of_leftovers + morsels_in_leftover - 1,
      last_symbol,
    ));
  }

  let mut leftover_bits_appended_to_buf = 0;
  while leftover_bits_appended_to_buf < leftover_bits_ready_to_append {
    // `as` simply truncates the higher bits, which is what we want here
    let selected_bits = (leftover_bits >> (56 - leftover_bits_appended_to_buf)) as u8;
    output[output_index] = selected_bits;
    output_index += 1;

    leftover_bits_appended_to_buf += 8;
  }

  Ok(output_index)
}

/// Decode 8 bytes of input into 6 bytes of output. 8 bytes of output will be written, but only the
/// first 6 of those contain meaningful data.
///
/// `input` is the bytes to decode, of which the first 8 bytes will be processed.
/// `index_at_start_of_input` is the offset in the overall input (used for reporting errors
/// accurately)
/// `decode_table` is the lookup table for the particular base64 alphabet.
/// `output` will have its first 8 bytes overwritten, of which only the first 6 are valid decoded
/// data.
// yes, really inline (worth 30-50% speedup)
#[inline(always)]
fn decode_chunk(
  input: &[u8],
  index_at_start_of_input: usize,
  decode_table: &[u8; 256],
  output: &mut [u8],
) -> Result<(), DecodeError> {
  let mut accum: u64;

  let morsel = decode_table[input[0] as usize];
  if morsel == tables::INVALID_VALUE {
    return Err(DecodeError::InvalidByte(index_at_start_of_input, input[0]));
  }
  accum = (morsel as u64) << 58;

  let morsel = decode_table[input[1] as usize];
  if morsel == tables::INVALID_VALUE {
    return Err(DecodeError::InvalidByte(
      index_at_start_of_input + 1,
      input[1],
    ));
  }
  accum |= (morsel as u64) << 52;

  let morsel = decode_table[input[2] as usize];
  if morsel == tables::INVALID_VALUE {
    return Err(DecodeError::InvalidByte(
      index_at_start_of_input + 2,
      input[2],
    ));
  }
  accum |= (morsel as u64) << 46;

  let morsel = decode_table[input[3] as usize];
  if morsel == tables::INVALID_VALUE {
    return Err(DecodeError::InvalidByte(
      index_at_start_of_input + 3,
      input[3],
    ));
  }
  accum |= (morsel as u64) << 40;

  let morsel = decode_table[input[4] as usize];
  if morsel == tables::INVALID_VALUE {
    return Err(DecodeError::InvalidByte(
      index_at_start_of_input + 4,
      input[4],
    ));
  }
  accum |= (morsel as u64) << 34;

  let morsel = decode_table[input[5] as usize];
  if morsel == tables::INVALID_VALUE {
    return Err(DecodeError::InvalidByte(
      index_at_start_of_input + 5,
      input[5],
    ));
  }
  accum |= (morsel as u64) << 28;

  let morsel = decode_table[input[6] as usize];
  if morsel == tables::INVALID_VALUE {
    return Err(DecodeError::InvalidByte(
      index_at_start_of_input + 6,
      input[6],
    ));
  }
  accum |= (morsel as u64) << 22;

  let morsel = decode_table[input[7] as usize];
  if morsel == tables::INVALID_VALUE {
    return Err(DecodeError::InvalidByte(
      index_at_start_of_input + 7,
      input[7],
    ));
  }
  accum |= (morsel as u64) << 16;

  write_u64(output, accum);

  Ok(())
}

#[inline]
fn write_u64(output: &mut [u8], value: u64) {
  output[..8].copy_from_slice(&value.to_be_bytes());
}

/// Decode an 8-byte chunk, but only write the 6 bytes actually decoded instead of including 2
/// trailing garbage bytes.
#[inline]
fn decode_chunk_precise(
  input: &[u8],
  index_at_start_of_input: usize,
  decode_table: &[u8; 256],
  output: &mut [u8],
) -> Result<(), DecodeError> {
  let mut tmp_buf = [0_u8; 8];

  decode_chunk(
    input,
    index_at_start_of_input,
    decode_table,
    &mut tmp_buf[..],
  )?;

  output[0..6].copy_from_slice(&tmp_buf[0..6]);

  Ok(())
}