dw3000-ng 0.8.2

A modernized driver for DW3000 Ultra Wide Band module
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47

//! Enumeration for fast commands

#[allow(non_camel_case_types)]
#[derive(Copy, Clone, Debug, Eq, PartialEq)]
/// Fast command enumeration to easily control the module
pub enum FastCommand {
    /// Fast command to go to IDLE state and clears any events
    CMD_TXRXOFF = 0x0,
    /// Fast command to Immediate start of transmission
    CMD_TX = 0x1,
    /// Fast command to Enable RX immediately
    CMD_RX = 0x2,
    /// Fast command to Delayed TX w.r.t. DX_TIME
    CMD_DTX = 0x3,
    /// Fast command to Delayed RX w.r.t. DX_TIME
    CMD_DRX = 0x4,
    /// Fast command to Delayed TX w.r.t. TX timestamp + DX_TIME
    CMD_DTX_TS = 0x5,
    /// Fast command to Delayed RX w.r.t. TX timestamp + DX_TIME
    CMD_DRX_TS = 0x6,
    /// Fast command to Delayed TX w.r.t. RX timestamp + DX_TIME
    CMD_DTX_RS = 0x7,
    /// Fast command to Delayed RX w.r.t. RX timestamp + DX_TIME
    CMD_DRX_RS = 0x8,
    /// Fast command to Delayed TX w.r.t. DREF_TIME + DX_TIME
    CMD_DTX_REF = 0x9,
    /// Fast command to Delayed RX w.r.t. DREF_TIME + DX_TIME
    CMD_DRX_REF = 0xA,
    /// Fast command to TX if no preamble detected
    CMD_CCA_TX = 0xB,
    /// Fast command to Start TX immediately, then when TX is done, enable the receiver
    CMD_TX_W4R = 0xC,
    /// Fast command to Delayed TX w.r.t. DX_TIME, then enable receiver
    CMD_DTX_W4R = 0xD,
    /// Fast command to Delayed TX w.r.t. TX timestamp + DX_TIME, then enable receiver
    CMD_DTX_TS_W4R = 0xE,
    /// Fast command to Delayed TX w.r.t. RX timestamp + DX_TIME, then enable receiver
    CMD_DTX_RS_W4R = 0xF,
    /// Fast command to Delayed TX w.r.t. DREF_TIME + DX_TIME, then enable receiver
    CMD_DTX_REF_W4R = 0x10,
    /// Fast command to TX packet if no preamble detected, then enable receiver
    CMD_CCA_TX_W4R = 0x11,
    /// Fast command to Clear all interrupt events
    CMD_CLR_IRQS = 0x12,
    /// Fast command to Toggle double buffer pointer / notify the device that the host has finished processing the received buffer/data.
    CMD_DB_TOGGLE = 0x13,
}