use super::*;
pub fn new() -> System {
System {
name: "SI", module: "si",
doc_prelude: "The International System of Units (SI)
Where experimental values are used for constants, the values are obtained from the 2014 values from
[The NIST Reference on Constants, Unit, and Uncertainty](http://physics.nist.gov/cuu/Constants/).
",
base: base_units!(
M: Meter, m, Length;
KG: Kilogram, kg, Mass;
S: Second, s, Time;
A: Ampere, A, Current;
K: Kelvin, K, Temperature;
CD: Candela, cd, LuminousIntensity;
MOL: Mole, mol, AmountOfSubstance;
),
derived: derived_units!(
HZ: Hertz = Unitless / Second, Frequency;
N: Newton = Kilogram * Meter / Second2, Force;
PA: Pascal = Newton / Meter2, Pressure;
J: Joule = Newton * Meter, Energy;
W: Watt = Joule / Second, Power;
C: Coulomb = Second * Ampere, Charge;
V: Volt = Watt / Ampere, ElectricPotential;
F: Farad = Coulomb / Volt, Capacitance;
OHM: Ohm = Volt / Ampere, Resistance;
SIE: Siemens = Ampere / Volt, Conductance;
WB: Weber = Joule / Ampere, MagneticFlux;
T: Tesla = Weber / Meter2;
H: Henry = Ohm * Second, Inductance;
LM: Lumen = Candela;
LX: Lux = Candela / Meter2;
BQ: Becquerel = Hertz;
GY: Gray = Joule / Kilogram;
SV: Sievert = Gray;
KAT: Katal = Mole / Second;
M2: Meter2 = Meter * Meter, Area;
M3: Meter3 = Meter2 * Meter, Volume;
PM: PerMeter = Unitless / Meter, ReciprocalLength;
PM2: PerMeter2 = PerMeter / Meter;
PM3: PerMeter3 = PerMeter2 / Meter;
S2: Second2 = Second * Second;
S3: Second3 = Second2 * Second;
S4: Second4 = Second3 * Second;
PS2: PerSecond2 = Unitless / Second2;
PS3: PerSecond3 = Unitless / Second3;
PS4: PerSecond4 = Unitless / Second4;
MPS: MeterPerSecond = Meter / Second, Velocity;
MPS2: MeterPerSecond2 = Meter / Second2, Acceleration;
MPS3: MeterPerSecond3 = Meter / Second3, Jerk;
MPS4: MeterPerSecond4 = Meter / Second4;
M2PS: Meter2PerSecond = Meter2 / Second;
M2PS2: Meter2PerSecond2 = Meter2 / Second2;
M2PS3: Meter2PerSecond3 = Meter2 / Second3;
M3PS: Meter3PerSecond = Meter3 / Second;
M3PS2: Meter3PerSecond2 = Meter3 / Second2;
M3PS3: Meter3PerSecond3 = Meter3 / Second3;
NS: NewtonSecond = Newton * Second;
JS: JouleSecond = Joule * Second;
NPS: NewtonPerSecond = Newton / Second;
KGPM: KilogramPerMeter = Kilogram / Meter;
KGPM2: KilogramPerMeter2 = Kilogram / Meter2;
KGPM3: KilogramPerMeter3 = Kilogram / Meter3;
MPKG: MeterPerKilogram = Meter / Kilogram;
M2PKG: Meter2PerKilogram = Meter2 / Kilogram;
M3PKG: Meter3PerKilogram = Meter3 / Kilogram;
MOLPM: MolePerMeter = Mole / Meter;
MOLPM2: MolePerMeter2 = Mole / Meter2;
MOLPM3: MolePerMeter3 = Mole / Meter3;
MPMOL: MeterPerMole = Meter / Mole;
M2PMOL: Meter2PerMole = Meter2 / Mole;
M3PMOL: Meter3PerMole = Meter3 / Mole;
JPK: JoulePerKelvin = Joule / Kelvin;
JPKMOL: JoulePerKelvinMole = JoulePerKelvin / Mole;
JPKGK: JoulePerKilogramKelvin = JoulePerKelvin / Kilogram;
JPMOL: JoulePerMole = Joule / Mole;
JPKG: JoulePerKilogram = Joule / Kilogram;
JPM2: JoulePerMeter2 = Joule / Meter2;
JPM3: JoulePerMeter3 = Joule / Meter3;
NPM: NewtonPerMeter = JoulePerMeter2;
WPM2: WattPerMeter2 = Watt / Meter2;
WPMK: WattPerMeterKelvin = Watt / Meter / Kelvin;
PAS: PascalSecond = Pascal * Second;
CPM2: CoulombPerMeter2 = Coulomb / Meter2;
CPM3: CoulombPerMeter3 = Coulomb / Meter3;
APM2: AmperePerMeter2 = Ampere / Meter2;
SIEPM: SiemensPerMeter = Siemens / Meter;
SIEM2PMOL: SiemensMeter2PerMole = Siemens * Meter2 / Mole;
FPM: FaradPerMeter = Farad / Meter;
HPM: HenryPerMeter = Henry / Meter;
VPM: VoltPerMeter = Volt / Meter;
APM: AmperePerMeter = Ampere / Meter;
CDPM2: CandelaPerMeter2 = Candela / Meter2;
LMS: LumenSecond = Lumen * Second;
LXS: LuxSecond = Lux * Second;
CPKG: CoulombPerKilogram = Coulomb / Kilogram;
GYPS: GrayPerSecond = Gray / Second;
OHMM: OhmMeter = Ohm * Meter;
CPM: CoulombPerMeter = Coulomb / Meter;
MOLPKG: MolePerKilogram = Mole / Kilogram;
KGPMOL: KilogramPerMole = Kilogram / Mole;
KGPS: KilogramPerSecomd = Kilogram / Second;
JPT: JoulePerTesla = Joule / Tesla;
WPM3: WattPerMeter3 = Watt / Meter3;
KPW: KelvinPerWatt = Kelvin / Watt;
PK: PerKelvin = Unitless / Kelvin;
KPM: KelvinPerMeter = Kelvin / Meter;
M2PVS: Meter2PerVoltSecond = Meter2 / Volt / Second;
JPM2S: JoulePerMeter2Second = JoulePerMeter2 / Second;
PPA: PerPascal = Unitless / Pascal;
PH: PerHenry = Unitless / Henry;
WBPM: WeberPerMeter = Weber / Meter;
WBM: WeberMeter = Weber * Meter;
TM: TeslaMeter = Tesla * Meter;
M3PMOLS: Meter3PerMoleSecond = Meter3 / Mole / Second;
NMSPKG: NewtonMeterSecondPerKilogram = Newton * Meter * Second / Kilogram;
LMPW: LumenPerWatt = Lumen / Watt;
MPH: MeterPerHenry = Meter / Henry;
WPM: WattPerMeter = Watt / Meter;
),
constants: constants!(
RAD: Unitless = 1.0 * ONE.value_unsafe, "Radian";
SR: Unitless = 1.0 * ONE.value_unsafe, "Steradian";
MIN: Second = 60.0 * S.value_unsafe, "Minute";
HR: Second = 60.0 * MIN.value_unsafe, "Hour";
DAY: Second = 24.0 * HR.value_unsafe, "Day";
DEG: Unitless = consts::PI / 180.0 * RAD.value_unsafe, "Degree";
HA: Meter2 = 10000.0 * M2.value_unsafe, "Hectare";
L: Meter3 = 0.001 * M3.value_unsafe, "Liter";
TNE: Kilogram = 1.0e3 * KG.value_unsafe, "Tonne";
AU: Meter = 149_597_870_700.0 * M.value_unsafe, "Astronomical unit";
E: Coulomb = 1.6021766208e-19 * C.value_unsafe, "Elementary charge";
EV: Joule = E.value_unsafe * V.value_unsafe, "Electronvolt";
U: Kilogram = 1.660539040e-27 * KG.value_unsafe, "Unified atomic mass unit; dalton";
C0: MeterPerSecond = 299792458.0 * MPS.value_unsafe, "Speed of light in a vacuum";
HBAR: JouleSecond = 1.054571800e-34 * JS.value_unsafe, "Reduced Planck constant";
M_E: Kilogram = 9.10938356e-31 * KG.value_unsafe, "Electron mass";
R_BOHR: Meter = 0.52917721067e-10 * M.value_unsafe, "Bohr radius";
EH: Joule = 4.359744650e-18 * J.value_unsafe, "Hartree energy";
AO: Meter = 1e-10 * M.value_unsafe, "Ångström";
ARE: Meter2 = 100.0 * M2.value_unsafe, "Are";
BARN: Meter2 = 1e-28 * M2.value_unsafe, "Barn";
BAR: Pascal = 1e5 * PA.value_unsafe, "Bar";
MBAR: Pascal = 100.0 * PA.value_unsafe, "Millibar";
ATM: Pascal = 101325.0 * PA.value_unsafe, "Atmosphere";
BA: Pascal = 0.1 * PA.value_unsafe, "Barye";
MMHG: Pascal = 133.322387415 * PA.value_unsafe, "Millimeter of mercury";
TORR: Pascal = ATM.value_unsafe / 760.0, "Torr";
DYN: Newton = 1.0e-5 * N.value_unsafe, "Dyne";
FT: Meter = 0.3048 * M.value_unsafe, "Foot";
IN: Meter = FT.value_unsafe / 12.0, "Inch";
YD: Meter = 3.0 * FT.value_unsafe, "Yard";
MI: Meter = 5280.0 * FT.value_unsafe, "Mile";
LB: Kilogram = 0.45359237 * KG.value_unsafe, "Pound mass";
OZ: Kilogram = LB.value_unsafe / 16.0, "Ounce";
LBF: Newton = 4.4482216152605 * N.value_unsafe, "Pound force";
),
fmt: true,
from: vec![
"UCUM",
],
refl_blacklist: vec!
["MOL", "KAT", "MOLPM", "MPMOL", "MOLPKG", "KGPMOL", "M2PMOL", "M3PMOL",
"SIEM2PMOL", "JPKMOL", "JPMOL", "MOLPM2", "MOLPM3", "M3PMOLS"],
}
}