da14583-pac 0.0.1

/*
DISCLAIMER
This software is supplied by Renesas Electronics Corporation and is only intended for use with Renesas products.
No other uses are authorized. This software is owned by Renesas Electronics Corporation and is protected under all
applicable laws, including copyright laws.
THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING THIS SOFTWARE, WHETHER EXPRESS, IMPLIED
OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT.  ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY
LAW, NEITHER RENESAS ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR
ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Renesas reserves the right, without notice, to make changes to this software and to discontinue the availability
of this software. By using this software, you agree to the additional terms and conditions found by accessing the
following link:
http://www.renesas.com/disclaimer

*/
// Generated from SVD 1.2, with svd2pac 0.4.0 on Sat, 12 Apr 2025 22:25:13 +0000

#![allow(clippy::identity_op)]
#![allow(clippy::module_inception)]
#![allow(clippy::derivable_impls)]
#[allow(unused_imports)]
use crate::common::sealed;
#[allow(unused_imports)]
use crate::common::*;
#[doc = r"wkup580_nl01 registers"]
unsafe impl ::core::marker::Send for super::Wkup580Nl01 {}
unsafe impl ::core::marker::Sync for super::Wkup580Nl01 {}
impl super::Wkup580Nl01 {
    #[allow(unused)]
    #[inline(always)]
    pub(crate) const fn _svd2pac_as_ptr(&self) -> *mut u8 {
        self.ptr
    }
    #[doc = "Number of events before wakeup interrupt"]
    #[inline(always)]
    pub const fn wkup_compare_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupCompareReg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupCompareReg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(2usize),
            )
        }
    }

    #[doc = "Actual number of events of the wakeup counter"]
    #[inline(always)]
    pub const fn wkup_counter_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupCounterReg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupCounterReg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(6usize),
            )
        }
    }

    #[doc = "Control register for the wakeup counter"]
    #[inline(always)]
    pub const fn wkup_ctrl_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupCtrlReg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupCtrlReg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0usize),
            )
        }
    }

    #[doc = "Select the sensitivity polarity for each P0 input"]
    #[inline(always)]
    pub const fn wkup_pol_p0_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupPolP0Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupPolP0Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(18usize),
            )
        }
    }

    #[doc = "Select the sensitivity polarity for each P1 input"]
    #[inline(always)]
    pub const fn wkup_pol_p1_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupPolP1Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupPolP1Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(20usize),
            )
        }
    }

    #[doc = "Select the sensitivity polarity for each P2 input"]
    #[inline(always)]
    pub const fn wkup_pol_p2_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupPolP2Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupPolP2Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(22usize),
            )
        }
    }

    #[doc = "Select the sensitivity polarity for each P3 input"]
    #[inline(always)]
    pub const fn wkup_pol_p3_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupPolP3Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupPolP3Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(24usize),
            )
        }
    }

    #[doc = "Reset the event counter"]
    #[inline(always)]
    pub const fn wkup_reset_cntr_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupResetCntrReg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupResetCntrReg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(8usize),
            )
        }
    }

    #[doc = "Reset wakeup interrupt"]
    #[inline(always)]
    pub const fn wkup_reset_irq_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupResetIrqReg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupResetIrqReg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(4usize),
            )
        }
    }

    #[doc = "Select which inputs from P0 port can trigger wkup counter"]
    #[inline(always)]
    pub const fn wkup_select_p0_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupSelectP0Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupSelectP0Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(10usize),
            )
        }
    }

    #[doc = "Select which inputs from P1 port can trigger wkup counter"]
    #[inline(always)]
    pub const fn wkup_select_p1_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupSelectP1Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupSelectP1Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(12usize),
            )
        }
    }

    #[doc = "Select which inputs from P2 port can trigger wkup counter"]
    #[inline(always)]
    pub const fn wkup_select_p2_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupSelectP2Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupSelectP2Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(14usize),
            )
        }
    }

    #[doc = "Select which inputs from P3 port can trigger wkup counter"]
    #[inline(always)]
    pub const fn wkup_select_p3_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupSelectP3Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupSelectP3Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(16usize),
            )
        }
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupCompareReg_SPEC;
impl crate::sealed::RegSpec for WkupCompareReg_SPEC {
    type DataType = u16;
}
#[doc = "Number of events before wakeup interrupt"]
pub type WkupCompareReg = crate::RegValueT<WkupCompareReg_SPEC>;

impl WkupCompareReg {
    #[doc = "The number of events that have to be counted before the wakeup interrupt will be given"]
    #[inline(always)]
    pub fn compare(
        self,
    ) -> crate::common::RegisterField<0, 0xff, 1, 0, u8, WkupCompareReg_SPEC, crate::common::RW>
    {
        crate::common::RegisterField::<0,0xff,1,0,u8, WkupCompareReg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for WkupCompareReg {
    #[inline(always)]
    fn default() -> WkupCompareReg {
        <crate::RegValueT<WkupCompareReg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupCounterReg_SPEC;
impl crate::sealed::RegSpec for WkupCounterReg_SPEC {
    type DataType = u16;
}
#[doc = "Actual number of events of the wakeup counter"]
pub type WkupCounterReg = crate::RegValueT<WkupCounterReg_SPEC>;

impl WkupCounterReg {
    #[doc = "This value represents the number of events that have been counted so far. It will be reset by resetting the interrupt."]
    #[inline(always)]
    pub fn event_value(
        self,
    ) -> crate::common::RegisterField<0, 0xff, 1, 0, u8, WkupCounterReg_SPEC, crate::common::R>
    {
        crate::common::RegisterField::<0,0xff,1,0,u8, WkupCounterReg_SPEC,crate::common::R>::from_register(self,0)
    }
}
impl ::core::default::Default for WkupCounterReg {
    #[inline(always)]
    fn default() -> WkupCounterReg {
        <crate::RegValueT<WkupCounterReg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupCtrlReg_SPEC;
impl crate::sealed::RegSpec for WkupCtrlReg_SPEC {
    type DataType = u16;
}
#[doc = "Control register for the wakeup counter"]
pub type WkupCtrlReg = crate::RegValueT<WkupCtrlReg_SPEC>;

impl WkupCtrlReg {
    #[doc = "0: no interrupt will be enabled\n1: if the event counter reaches the value set by WKUP_COMPARE_REG an IRQ will be generated"]
    #[inline(always)]
    pub fn wkup_enable_irq(
        self,
    ) -> crate::common::RegisterFieldBool<7, 1, 0, WkupCtrlReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<7,1,0,WkupCtrlReg_SPEC,crate::common::RW>::from_register(self,0)
    }
    #[doc = "0: no effect\n1: emulate key hit. The event counter will increment by 1 (after debouncing if enabled). First make this bit 0 before any new key hit can be sensed."]
    #[inline(always)]
    pub fn wkup_sft_keyhit(
        self,
    ) -> crate::common::RegisterFieldBool<6, 1, 0, WkupCtrlReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<6,1,0,WkupCtrlReg_SPEC,crate::common::RW>::from_register(self,0)
    }
    #[doc = "Keyboard debounce time (N*1 ms with N = 1 to 63).\n0x0: no debouncing\n0x1 to 0x3F: 1 ms to 63 ms debounce time"]
    #[inline(always)]
    pub fn wkup_deb_value(
        self,
    ) -> crate::common::RegisterField<0, 0x3f, 1, 0, u8, WkupCtrlReg_SPEC, crate::common::RW> {
        crate::common::RegisterField::<0,0x3f,1,0,u8, WkupCtrlReg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for WkupCtrlReg {
    #[inline(always)]
    fn default() -> WkupCtrlReg {
        <crate::RegValueT<WkupCtrlReg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupPolP0Reg_SPEC;
impl crate::sealed::RegSpec for WkupPolP0Reg_SPEC {
    type DataType = u16;
}
#[doc = "Select the sensitivity polarity for each P0 input"]
pub type WkupPolP0Reg = crate::RegValueT<WkupPolP0Reg_SPEC>;

impl WkupPolP0Reg {
    #[doc = "0: enabled input P0x will increment the event counter if that input goes high\n1: enabled input P0x will increment the event counter if that input goes low"]
    #[inline(always)]
    pub fn wkup_pol_p0(
        self,
    ) -> crate::common::RegisterField<0, 0xff, 1, 0, u8, WkupPolP0Reg_SPEC, crate::common::RW> {
        crate::common::RegisterField::<0,0xff,1,0,u8, WkupPolP0Reg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for WkupPolP0Reg {
    #[inline(always)]
    fn default() -> WkupPolP0Reg {
        <crate::RegValueT<WkupPolP0Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupPolP1Reg_SPEC;
impl crate::sealed::RegSpec for WkupPolP1Reg_SPEC {
    type DataType = u16;
}
#[doc = "Select the sensitivity polarity for each P1 input"]
pub type WkupPolP1Reg = crate::RegValueT<WkupPolP1Reg_SPEC>;

impl WkupPolP1Reg {
    #[doc = "0: enabled input P1x will increment the event counter if that input goes high\n1: enabled input P1x will increment the event counter if that input goes low"]
    #[inline(always)]
    pub fn wkup_pol_p1(
        self,
    ) -> crate::common::RegisterField<0, 0x3f, 1, 0, u8, WkupPolP1Reg_SPEC, crate::common::RW> {
        crate::common::RegisterField::<0,0x3f,1,0,u8, WkupPolP1Reg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for WkupPolP1Reg {
    #[inline(always)]
    fn default() -> WkupPolP1Reg {
        <crate::RegValueT<WkupPolP1Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupPolP2Reg_SPEC;
impl crate::sealed::RegSpec for WkupPolP2Reg_SPEC {
    type DataType = u16;
}
#[doc = "Select the sensitivity polarity for each P2 input"]
pub type WkupPolP2Reg = crate::RegValueT<WkupPolP2Reg_SPEC>;

impl WkupPolP2Reg {
    #[doc = "0: enabled input P2x will increment the event counter if that input goes high\n1: enabled input P2x will increment the event counter if that input goes low"]
    #[inline(always)]
    pub fn wkup_pol_p2(
        self,
    ) -> crate::common::RegisterField<0, 0x3ff, 1, 0, u16, WkupPolP2Reg_SPEC, crate::common::RW>
    {
        crate::common::RegisterField::<0,0x3ff,1,0,u16, WkupPolP2Reg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for WkupPolP2Reg {
    #[inline(always)]
    fn default() -> WkupPolP2Reg {
        <crate::RegValueT<WkupPolP2Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupPolP3Reg_SPEC;
impl crate::sealed::RegSpec for WkupPolP3Reg_SPEC {
    type DataType = u16;
}
#[doc = "Select the sensitivity polarity for each P3 input"]
pub type WkupPolP3Reg = crate::RegValueT<WkupPolP3Reg_SPEC>;

impl WkupPolP3Reg {
    #[doc = "0: enabled input P3x will increment the event counter if that input goes high\n1: enabled input P3x will increment the event counter if that input goes low"]
    #[inline(always)]
    pub fn wkup_pol_p3(
        self,
    ) -> crate::common::RegisterField<0, 0xff, 1, 0, u8, WkupPolP3Reg_SPEC, crate::common::RW> {
        crate::common::RegisterField::<0,0xff,1,0,u8, WkupPolP3Reg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for WkupPolP3Reg {
    #[inline(always)]
    fn default() -> WkupPolP3Reg {
        <crate::RegValueT<WkupPolP3Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupResetCntrReg_SPEC;
impl crate::sealed::RegSpec for WkupResetCntrReg_SPEC {
    type DataType = u16;
}
#[doc = "Reset the event counter"]
pub type WkupResetCntrReg = crate::RegValueT<WkupResetCntrReg_SPEC>;

impl WkupResetCntrReg {
    #[doc = "writing any value to this register will reset the event counter"]
    #[inline(always)]
    pub fn wkup_cntr_rst(
        self,
    ) -> crate::common::RegisterField<0, 0xffff, 1, 0, u16, WkupResetCntrReg_SPEC, crate::common::W>
    {
        crate::common::RegisterField::<0,0xffff,1,0,u16, WkupResetCntrReg_SPEC,crate::common::W>::from_register(self,0)
    }
}
impl ::core::default::Default for WkupResetCntrReg {
    #[inline(always)]
    fn default() -> WkupResetCntrReg {
        <crate::RegValueT<WkupResetCntrReg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupResetIrqReg_SPEC;
impl crate::sealed::RegSpec for WkupResetIrqReg_SPEC {
    type DataType = u16;
}
#[doc = "Reset wakeup interrupt"]
pub type WkupResetIrqReg = crate::RegValueT<WkupResetIrqReg_SPEC>;

impl WkupResetIrqReg {
    #[doc = "writing any value to this register will reset the interrupt. reading always returns 0."]
    #[inline(always)]
    pub fn wkup_irq_rst(
        self,
    ) -> crate::common::RegisterField<0, 0xffff, 1, 0, u16, WkupResetIrqReg_SPEC, crate::common::W>
    {
        crate::common::RegisterField::<0,0xffff,1,0,u16, WkupResetIrqReg_SPEC,crate::common::W>::from_register(self,0)
    }
}
impl ::core::default::Default for WkupResetIrqReg {
    #[inline(always)]
    fn default() -> WkupResetIrqReg {
        <crate::RegValueT<WkupResetIrqReg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupSelectP0Reg_SPEC;
impl crate::sealed::RegSpec for WkupSelectP0Reg_SPEC {
    type DataType = u16;
}
#[doc = "Select which inputs from P0 port can trigger wkup counter"]
pub type WkupSelectP0Reg = crate::RegValueT<WkupSelectP0Reg_SPEC>;

impl WkupSelectP0Reg {
    #[doc = "0: input P0x is not enabled for wakeup event counter\n1: input P0x is enabled for wakeup event counter"]
    #[inline(always)]
    pub fn wkup_select_p0(
        self,
    ) -> crate::common::RegisterField<0, 0xff, 1, 0, u8, WkupSelectP0Reg_SPEC, crate::common::RW>
    {
        crate::common::RegisterField::<0,0xff,1,0,u8, WkupSelectP0Reg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for WkupSelectP0Reg {
    #[inline(always)]
    fn default() -> WkupSelectP0Reg {
        <crate::RegValueT<WkupSelectP0Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupSelectP1Reg_SPEC;
impl crate::sealed::RegSpec for WkupSelectP1Reg_SPEC {
    type DataType = u16;
}
#[doc = "Select which inputs from P1 port can trigger wkup counter"]
pub type WkupSelectP1Reg = crate::RegValueT<WkupSelectP1Reg_SPEC>;

impl WkupSelectP1Reg {
    #[doc = "0: input P1x is not enabled for wakeup event counter\n1: input P1x is enabled for wakeup event counter"]
    #[inline(always)]
    pub fn wkup_select_p1(
        self,
    ) -> crate::common::RegisterField<0, 0x3f, 1, 0, u8, WkupSelectP1Reg_SPEC, crate::common::RW>
    {
        crate::common::RegisterField::<0,0x3f,1,0,u8, WkupSelectP1Reg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for WkupSelectP1Reg {
    #[inline(always)]
    fn default() -> WkupSelectP1Reg {
        <crate::RegValueT<WkupSelectP1Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupSelectP2Reg_SPEC;
impl crate::sealed::RegSpec for WkupSelectP2Reg_SPEC {
    type DataType = u16;
}
#[doc = "Select which inputs from P2 port can trigger wkup counter"]
pub type WkupSelectP2Reg = crate::RegValueT<WkupSelectP2Reg_SPEC>;

impl WkupSelectP2Reg {
    #[doc = "0: input P2x is not enabled for wakeup event counter\n1: input P2x is enabled for wakeup event counter"]
    #[inline(always)]
    pub fn wkup_select_p2(
        self,
    ) -> crate::common::RegisterField<0, 0x3ff, 1, 0, u16, WkupSelectP2Reg_SPEC, crate::common::RW>
    {
        crate::common::RegisterField::<0,0x3ff,1,0,u16, WkupSelectP2Reg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for WkupSelectP2Reg {
    #[inline(always)]
    fn default() -> WkupSelectP2Reg {
        <crate::RegValueT<WkupSelectP2Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupSelectP3Reg_SPEC;
impl crate::sealed::RegSpec for WkupSelectP3Reg_SPEC {
    type DataType = u16;
}
#[doc = "Select which inputs from P3 port can trigger wkup counter"]
pub type WkupSelectP3Reg = crate::RegValueT<WkupSelectP3Reg_SPEC>;

impl WkupSelectP3Reg {
    #[doc = "0: input P3x is not enabled for wakeup event counter\n1: input P3x is enabled for wakeup event counter"]
    #[inline(always)]
    pub fn wkup_select_p3(
        self,
    ) -> crate::common::RegisterField<0, 0xff, 1, 0, u8, WkupSelectP3Reg_SPEC, crate::common::RW>
    {
        crate::common::RegisterField::<0,0xff,1,0,u8, WkupSelectP3Reg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for WkupSelectP3Reg {
    #[inline(always)]
    fn default() -> WkupSelectP3Reg {
        <crate::RegValueT<WkupSelectP3Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}