#[doc = "Register `pe_pull0` reader"]
pub type R = crate::R<PE_PULL0_SPEC>;
#[doc = "Register `pe_pull0` writer"]
pub type W = crate::W<PE_PULL0_SPEC>;
#[doc = "Field `pe_pull[0-15]` reader - PE Pull_up/down Select"]
pub type PE_PULL_R = crate::FieldReader<PE_PULL_A>;
#[doc = "PE Pull_up/down Select\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum PE_PULL_A {
#[doc = "0: `0`"]
PULL_DISABLE = 0,
#[doc = "1: `1`"]
PULL_UP = 1,
#[doc = "2: `10`"]
PULL_DOWN = 2,
}
impl From<PE_PULL_A> for u8 {
#[inline(always)]
fn from(variant: PE_PULL_A) -> Self {
variant as _
}
}
impl crate::FieldSpec for PE_PULL_A {
type Ux = u8;
}
impl PE_PULL_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub const fn variant(&self) -> PE_PULL_A {
match self.bits {
0 => PE_PULL_A::PULL_DISABLE,
1 => PE_PULL_A::PULL_UP,
2 => PE_PULL_A::PULL_DOWN,
_ => unreachable!(),
}
}
#[doc = "`0`"]
#[inline(always)]
pub fn is_pull_disable(&self) -> bool {
*self == PE_PULL_A::PULL_DISABLE
}
#[doc = "`1`"]
#[inline(always)]
pub fn is_pull_up(&self) -> bool {
*self == PE_PULL_A::PULL_UP
}
#[doc = "`10`"]
#[inline(always)]
pub fn is_pull_down(&self) -> bool {
*self == PE_PULL_A::PULL_DOWN
}
}
#[doc = "Field `pe_pull[0-15]` writer - PE Pull_up/down Select"]
pub type PE_PULL_W<'a, REG> = crate::FieldWriter<'a, REG, 2, PE_PULL_A>;
impl<'a, REG> PE_PULL_W<'a, REG>
where
REG: crate::Writable + crate::RegisterSpec,
REG::Ux: From<u8>,
{
#[doc = "`0`"]
#[inline(always)]
pub fn pull_disable(self) -> &'a mut crate::W<REG> {
self.variant(PE_PULL_A::PULL_DISABLE)
}
#[doc = "`1`"]
#[inline(always)]
pub fn pull_up(self) -> &'a mut crate::W<REG> {
self.variant(PE_PULL_A::PULL_UP)
}
#[doc = "`10`"]
#[inline(always)]
pub fn pull_down(self) -> &'a mut crate::W<REG> {
self.variant(PE_PULL_A::PULL_DOWN)
}
}
impl R {
#[doc = "PE Pull_up/down Select\n\nNOTE: `n` is number of field in register. `n == 0` corresponds to `pe0_pull` field"]
#[inline(always)]
pub fn pe_pull(&self, n: u8) -> PE_PULL_R {
#[allow(clippy::no_effect)]
[(); 16][n as usize];
PE_PULL_R::new(((self.bits >> (n * 2)) & 3) as u8)
}
#[doc = "Bits 0:1 - PE Pull_up/down Select"]
#[inline(always)]
pub fn pe0_pull(&self) -> PE_PULL_R {
PE_PULL_R::new((self.bits & 3) as u8)
}
#[doc = "Bits 2:3 - PE Pull_up/down Select"]
#[inline(always)]
pub fn pe1_pull(&self) -> PE_PULL_R {
PE_PULL_R::new(((self.bits >> 2) & 3) as u8)
}
#[doc = "Bits 4:5 - PE Pull_up/down Select"]
#[inline(always)]
pub fn pe2_pull(&self) -> PE_PULL_R {
PE_PULL_R::new(((self.bits >> 4) & 3) as u8)
}
#[doc = "Bits 6:7 - PE Pull_up/down Select"]
#[inline(always)]
pub fn pe3_pull(&self) -> PE_PULL_R {
PE_PULL_R::new(((self.bits >> 6) & 3) as u8)
}
#[doc = "Bits 8:9 - PE Pull_up/down Select"]
#[inline(always)]
pub fn pe4_pull(&self) -> PE_PULL_R {
PE_PULL_R::new(((self.bits >> 8) & 3) as u8)
}
#[doc = "Bits 10:11 - PE Pull_up/down Select"]
#[inline(always)]
pub fn pe5_pull(&self) -> PE_PULL_R {
PE_PULL_R::new(((self.bits >> 10) & 3) as u8)
}
#[doc = "Bits 12:13 - PE Pull_up/down Select"]
#[inline(always)]
pub fn pe6_pull(&self) -> PE_PULL_R {
PE_PULL_R::new(((self.bits >> 12) & 3) as u8)
}
#[doc = "Bits 14:15 - PE Pull_up/down Select"]
#[inline(always)]
pub fn pe7_pull(&self) -> PE_PULL_R {
PE_PULL_R::new(((self.bits >> 14) & 3) as u8)
}
#[doc = "Bits 16:17 - PE Pull_up/down Select"]
#[inline(always)]
pub fn pe8_pull(&self) -> PE_PULL_R {
PE_PULL_R::new(((self.bits >> 16) & 3) as u8)
}
#[doc = "Bits 18:19 - PE Pull_up/down Select"]
#[inline(always)]
pub fn pe9_pull(&self) -> PE_PULL_R {
PE_PULL_R::new(((self.bits >> 18) & 3) as u8)
}
#[doc = "Bits 20:21 - PE Pull_up/down Select"]
#[inline(always)]
pub fn pe10_pull(&self) -> PE_PULL_R {
PE_PULL_R::new(((self.bits >> 20) & 3) as u8)
}
#[doc = "Bits 22:23 - PE Pull_up/down Select"]
#[inline(always)]
pub fn pe11_pull(&self) -> PE_PULL_R {
PE_PULL_R::new(((self.bits >> 22) & 3) as u8)
}
#[doc = "Bits 24:25 - PE Pull_up/down Select"]
#[inline(always)]
pub fn pe12_pull(&self) -> PE_PULL_R {
PE_PULL_R::new(((self.bits >> 24) & 3) as u8)
}
#[doc = "Bits 26:27 - PE Pull_up/down Select"]
#[inline(always)]
pub fn pe13_pull(&self) -> PE_PULL_R {
PE_PULL_R::new(((self.bits >> 26) & 3) as u8)
}
#[doc = "Bits 28:29 - PE Pull_up/down Select"]
#[inline(always)]
pub fn pe14_pull(&self) -> PE_PULL_R {
PE_PULL_R::new(((self.bits >> 28) & 3) as u8)
}
#[doc = "Bits 30:31 - PE Pull_up/down Select"]
#[inline(always)]
pub fn pe15_pull(&self) -> PE_PULL_R {
PE_PULL_R::new(((self.bits >> 30) & 3) as u8)
}
}
impl W {
#[doc = "PE Pull_up/down Select\n\nNOTE: `n` is number of field in register. `n == 0` corresponds to `pe0_pull` field"]
#[inline(always)]
#[must_use]
pub fn pe_pull(&mut self, n: u8) -> PE_PULL_W<PE_PULL0_SPEC> {
#[allow(clippy::no_effect)]
[(); 16][n as usize];
PE_PULL_W::new(self, n * 2)
}
#[doc = "Bits 0:1 - PE Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pe0_pull(&mut self) -> PE_PULL_W<PE_PULL0_SPEC> {
PE_PULL_W::new(self, 0)
}
#[doc = "Bits 2:3 - PE Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pe1_pull(&mut self) -> PE_PULL_W<PE_PULL0_SPEC> {
PE_PULL_W::new(self, 2)
}
#[doc = "Bits 4:5 - PE Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pe2_pull(&mut self) -> PE_PULL_W<PE_PULL0_SPEC> {
PE_PULL_W::new(self, 4)
}
#[doc = "Bits 6:7 - PE Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pe3_pull(&mut self) -> PE_PULL_W<PE_PULL0_SPEC> {
PE_PULL_W::new(self, 6)
}
#[doc = "Bits 8:9 - PE Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pe4_pull(&mut self) -> PE_PULL_W<PE_PULL0_SPEC> {
PE_PULL_W::new(self, 8)
}
#[doc = "Bits 10:11 - PE Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pe5_pull(&mut self) -> PE_PULL_W<PE_PULL0_SPEC> {
PE_PULL_W::new(self, 10)
}
#[doc = "Bits 12:13 - PE Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pe6_pull(&mut self) -> PE_PULL_W<PE_PULL0_SPEC> {
PE_PULL_W::new(self, 12)
}
#[doc = "Bits 14:15 - PE Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pe7_pull(&mut self) -> PE_PULL_W<PE_PULL0_SPEC> {
PE_PULL_W::new(self, 14)
}
#[doc = "Bits 16:17 - PE Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pe8_pull(&mut self) -> PE_PULL_W<PE_PULL0_SPEC> {
PE_PULL_W::new(self, 16)
}
#[doc = "Bits 18:19 - PE Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pe9_pull(&mut self) -> PE_PULL_W<PE_PULL0_SPEC> {
PE_PULL_W::new(self, 18)
}
#[doc = "Bits 20:21 - PE Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pe10_pull(&mut self) -> PE_PULL_W<PE_PULL0_SPEC> {
PE_PULL_W::new(self, 20)
}
#[doc = "Bits 22:23 - PE Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pe11_pull(&mut self) -> PE_PULL_W<PE_PULL0_SPEC> {
PE_PULL_W::new(self, 22)
}
#[doc = "Bits 24:25 - PE Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pe12_pull(&mut self) -> PE_PULL_W<PE_PULL0_SPEC> {
PE_PULL_W::new(self, 24)
}
#[doc = "Bits 26:27 - PE Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pe13_pull(&mut self) -> PE_PULL_W<PE_PULL0_SPEC> {
PE_PULL_W::new(self, 26)
}
#[doc = "Bits 28:29 - PE Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pe14_pull(&mut self) -> PE_PULL_W<PE_PULL0_SPEC> {
PE_PULL_W::new(self, 28)
}
#[doc = "Bits 30:31 - PE Pull_up/down Select"]
#[inline(always)]
#[must_use]
pub fn pe15_pull(&mut self) -> PE_PULL_W<PE_PULL0_SPEC> {
PE_PULL_W::new(self, 30)
}
#[doc = r" Writes raw bits to the register."]
#[doc = r""]
#[doc = r" # Safety"]
#[doc = r""]
#[doc = r" Passing incorrect value can cause undefined behaviour. See reference manual"]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.bits = bits;
self
}
}
#[doc = "PE Pull Register 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`pe_pull0::R`](R). You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`pe_pull0::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct PE_PULL0_SPEC;
impl crate::RegisterSpec for PE_PULL0_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [`pe_pull0::R`](R) reader structure"]
impl crate::Readable for PE_PULL0_SPEC {}
#[doc = "`write(|w| ..)` method takes [`pe_pull0::W`](W) writer structure"]
impl crate::Writable for PE_PULL0_SPEC {
const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets pe_pull0 to value 0"]
impl crate::Resettable for PE_PULL0_SPEC {
const RESET_VALUE: Self::Ux = 0;
}