d1-pac 0.0.32

Peripheral access API for Allwinner D1 SoC generated from unofficial SVD file
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180

#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
    gp_sr_con: GP_SR_CON,
    gp_ctrl: GP_CTRL,
    gp_cs_en: GP_CS_EN,
    gp_fifo_intc: GP_FIFO_INTC,
    gp_fifo_ints: GP_FIFO_INTS,
    gp_fifo_data: GP_FIFO_DATA,
    gp_cdata: GP_CDATA,
    _reserved7: [u8; 0x04],
    gp_datal_intc: GP_DATAL_INTC,
    gp_datah_intc: GP_DATAH_INTC,
    gp_data_intc: GP_DATA_INTC,
    _reserved10: [u8; 0x04],
    gp_datal_ints: GP_DATAL_INTS,
    gp_datah_ints: GP_DATAH_INTS,
    gp_data_ints: GP_DATA_INTS,
    _reserved13: [u8; 0x04],
    gp_ch0_cmp_data: GP_CH0_CMP_DATA,
    gp_ch1_cmp_data: GP_CH1_CMP_DATA,
    _reserved15: [u8; 0x38],
    gp_ch0_data: GP_CH0_DATA,
    gp_ch1_data: GP_CH1_DATA,
}
impl RegisterBlock {
    #[doc = "0x00 - GPADC Sample Rate Configure Register"]
    #[inline(always)]
    pub const fn gp_sr_con(&self) -> &GP_SR_CON {
        &self.gp_sr_con
    }
    #[doc = "0x04 - GPADC Control Register"]
    #[inline(always)]
    pub const fn gp_ctrl(&self) -> &GP_CTRL {
        &self.gp_ctrl
    }
    #[doc = "0x08 - GPADC Compare and Select Enable Register"]
    #[inline(always)]
    pub const fn gp_cs_en(&self) -> &GP_CS_EN {
        &self.gp_cs_en
    }
    #[doc = "0x0c - GPADC FIFO Interrupt Control Register"]
    #[inline(always)]
    pub const fn gp_fifo_intc(&self) -> &GP_FIFO_INTC {
        &self.gp_fifo_intc
    }
    #[doc = "0x10 - GPADC FIFO Interrupt Status Register"]
    #[inline(always)]
    pub const fn gp_fifo_ints(&self) -> &GP_FIFO_INTS {
        &self.gp_fifo_ints
    }
    #[doc = "0x14 - GPADC FIFO Data Register"]
    #[inline(always)]
    pub const fn gp_fifo_data(&self) -> &GP_FIFO_DATA {
        &self.gp_fifo_data
    }
    #[doc = "0x18 - GPADC Calibration Data Register"]
    #[inline(always)]
    pub const fn gp_cdata(&self) -> &GP_CDATA {
        &self.gp_cdata
    }
    #[doc = "0x20 - GPADC Data Low Interrupt Configure Register"]
    #[inline(always)]
    pub const fn gp_datal_intc(&self) -> &GP_DATAL_INTC {
        &self.gp_datal_intc
    }
    #[doc = "0x24 - GPADC Data High Interrupt Configure Register"]
    #[inline(always)]
    pub const fn gp_datah_intc(&self) -> &GP_DATAH_INTC {
        &self.gp_datah_intc
    }
    #[doc = "0x28 - GPADC Data Interrupt Configure Register"]
    #[inline(always)]
    pub const fn gp_data_intc(&self) -> &GP_DATA_INTC {
        &self.gp_data_intc
    }
    #[doc = "0x30 - GPADC Data Low Interrupt Status Register"]
    #[inline(always)]
    pub const fn gp_datal_ints(&self) -> &GP_DATAL_INTS {
        &self.gp_datal_ints
    }
    #[doc = "0x34 - GPADC Data High Interrupt Status Register"]
    #[inline(always)]
    pub const fn gp_datah_ints(&self) -> &GP_DATAH_INTS {
        &self.gp_datah_ints
    }
    #[doc = "0x38 - GPADC Data Interrupt Status Register"]
    #[inline(always)]
    pub const fn gp_data_ints(&self) -> &GP_DATA_INTS {
        &self.gp_data_ints
    }
    #[doc = "0x40 - GPADC CH0 Compare Data Register"]
    #[inline(always)]
    pub const fn gp_ch0_cmp_data(&self) -> &GP_CH0_CMP_DATA {
        &self.gp_ch0_cmp_data
    }
    #[doc = "0x44 - GPADC CH1 Compare Data Register"]
    #[inline(always)]
    pub const fn gp_ch1_cmp_data(&self) -> &GP_CH1_CMP_DATA {
        &self.gp_ch1_cmp_data
    }
    #[doc = "0x80 - GPADC CH0 Data Register"]
    #[inline(always)]
    pub const fn gp_ch0_data(&self) -> &GP_CH0_DATA {
        &self.gp_ch0_data
    }
    #[doc = "0x84 - GPADC CH1 Data Register"]
    #[inline(always)]
    pub const fn gp_ch1_data(&self) -> &GP_CH1_DATA {
        &self.gp_ch1_data
    }
}
#[doc = "gp_sr_con (rw) register accessor: GPADC Sample Rate Configure Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_sr_con::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_sr_con::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_sr_con`] module"]
pub type GP_SR_CON = crate::Reg<gp_sr_con::GP_SR_CON_SPEC>;
#[doc = "GPADC Sample Rate Configure Register"]
pub mod gp_sr_con;
#[doc = "gp_ctrl (rw) register accessor: GPADC Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_ctrl::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_ctrl::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_ctrl`] module"]
pub type GP_CTRL = crate::Reg<gp_ctrl::GP_CTRL_SPEC>;
#[doc = "GPADC Control Register"]
pub mod gp_ctrl;
#[doc = "gp_cs_en (rw) register accessor: GPADC Compare and Select Enable Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_cs_en::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_cs_en::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_cs_en`] module"]
pub type GP_CS_EN = crate::Reg<gp_cs_en::GP_CS_EN_SPEC>;
#[doc = "GPADC Compare and Select Enable Register"]
pub mod gp_cs_en;
#[doc = "gp_fifo_intc (rw) register accessor: GPADC FIFO Interrupt Control Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_fifo_intc::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_fifo_intc::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_fifo_intc`] module"]
pub type GP_FIFO_INTC = crate::Reg<gp_fifo_intc::GP_FIFO_INTC_SPEC>;
#[doc = "GPADC FIFO Interrupt Control Register"]
pub mod gp_fifo_intc;
#[doc = "gp_fifo_ints (rw) register accessor: GPADC FIFO Interrupt Status Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_fifo_ints::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_fifo_ints::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_fifo_ints`] module"]
pub type GP_FIFO_INTS = crate::Reg<gp_fifo_ints::GP_FIFO_INTS_SPEC>;
#[doc = "GPADC FIFO Interrupt Status Register"]
pub mod gp_fifo_ints;
#[doc = "gp_fifo_data (rw) register accessor: GPADC FIFO Data Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_fifo_data::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_fifo_data::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_fifo_data`] module"]
pub type GP_FIFO_DATA = crate::Reg<gp_fifo_data::GP_FIFO_DATA_SPEC>;
#[doc = "GPADC FIFO Data Register"]
pub mod gp_fifo_data;
#[doc = "gp_cdata (rw) register accessor: GPADC Calibration Data Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_cdata::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_cdata::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_cdata`] module"]
pub type GP_CDATA = crate::Reg<gp_cdata::GP_CDATA_SPEC>;
#[doc = "GPADC Calibration Data Register"]
pub mod gp_cdata;
#[doc = "gp_datal_intc (rw) register accessor: GPADC Data Low Interrupt Configure Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_datal_intc::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_datal_intc::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_datal_intc`] module"]
pub type GP_DATAL_INTC = crate::Reg<gp_datal_intc::GP_DATAL_INTC_SPEC>;
#[doc = "GPADC Data Low Interrupt Configure Register"]
pub mod gp_datal_intc;
#[doc = "gp_datah_intc (rw) register accessor: GPADC Data High Interrupt Configure Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_datah_intc::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_datah_intc::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_datah_intc`] module"]
pub type GP_DATAH_INTC = crate::Reg<gp_datah_intc::GP_DATAH_INTC_SPEC>;
#[doc = "GPADC Data High Interrupt Configure Register"]
pub mod gp_datah_intc;
#[doc = "gp_data_intc (rw) register accessor: GPADC Data Interrupt Configure Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_data_intc::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_data_intc::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_data_intc`] module"]
pub type GP_DATA_INTC = crate::Reg<gp_data_intc::GP_DATA_INTC_SPEC>;
#[doc = "GPADC Data Interrupt Configure Register"]
pub mod gp_data_intc;
#[doc = "gp_datal_ints (rw) register accessor: GPADC Data Low Interrupt Status Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_datal_ints::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_datal_ints::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_datal_ints`] module"]
pub type GP_DATAL_INTS = crate::Reg<gp_datal_ints::GP_DATAL_INTS_SPEC>;
#[doc = "GPADC Data Low Interrupt Status Register"]
pub mod gp_datal_ints;
#[doc = "gp_datah_ints (rw) register accessor: GPADC Data High Interrupt Status Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_datah_ints::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_datah_ints::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_datah_ints`] module"]
pub type GP_DATAH_INTS = crate::Reg<gp_datah_ints::GP_DATAH_INTS_SPEC>;
#[doc = "GPADC Data High Interrupt Status Register"]
pub mod gp_datah_ints;
#[doc = "gp_data_ints (rw) register accessor: GPADC Data Interrupt Status Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_data_ints::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_data_ints::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_data_ints`] module"]
pub type GP_DATA_INTS = crate::Reg<gp_data_ints::GP_DATA_INTS_SPEC>;
#[doc = "GPADC Data Interrupt Status Register"]
pub mod gp_data_ints;
#[doc = "gp_ch0_cmp_data (rw) register accessor: GPADC CH0 Compare Data Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_ch0_cmp_data::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_ch0_cmp_data::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_ch0_cmp_data`] module"]
pub type GP_CH0_CMP_DATA = crate::Reg<gp_ch0_cmp_data::GP_CH0_CMP_DATA_SPEC>;
#[doc = "GPADC CH0 Compare Data Register"]
pub mod gp_ch0_cmp_data;
#[doc = "gp_ch1_cmp_data (rw) register accessor: GPADC CH1 Compare Data Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_ch1_cmp_data::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_ch1_cmp_data::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_ch1_cmp_data`] module"]
pub type GP_CH1_CMP_DATA = crate::Reg<gp_ch1_cmp_data::GP_CH1_CMP_DATA_SPEC>;
#[doc = "GPADC CH1 Compare Data Register"]
pub mod gp_ch1_cmp_data;
#[doc = "gp_ch0_data (rw) register accessor: GPADC CH0 Data Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_ch0_data::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_ch0_data::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_ch0_data`] module"]
pub type GP_CH0_DATA = crate::Reg<gp_ch0_data::GP_CH0_DATA_SPEC>;
#[doc = "GPADC CH0 Data Register"]
pub mod gp_ch0_data;
#[doc = "gp_ch1_data (rw) register accessor: GPADC CH1 Data Register\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`gp_ch1_data::R`].  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`gp_ch1_data::W`]. You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@gp_ch1_data`] module"]
pub type GP_CH1_DATA = crate::Reg<gp_ch1_data::GP_CH1_DATA_SPEC>;
#[doc = "GPADC CH1 Data Register"]
pub mod gp_ch1_data;