cyt4dn_b 0.0.1

Peripheral access crate for cyt4dn_b T2G family
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95

#[doc = "Register `SERVICE` reader"]
pub struct R(crate::R<SERVICE_SPEC>);
impl core::ops::Deref for R {
    type Target = crate::R<SERVICE_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl From<crate::R<SERVICE_SPEC>> for R {
    #[inline(always)]
    fn from(reader: crate::R<SERVICE_SPEC>) -> Self {
        R(reader)
    }
}
#[doc = "Register `SERVICE` writer"]
pub struct W(crate::W<SERVICE_SPEC>);
impl core::ops::Deref for W {
    type Target = crate::W<SERVICE_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl core::ops::DerefMut for W {
    #[inline(always)]
    fn deref_mut(&mut self) -> &mut Self::Target {
        &mut self.0
    }
}
impl From<crate::W<SERVICE_SPEC>> for W {
    #[inline(always)]
    fn from(writer: crate::W<SERVICE_SPEC>) -> Self {
        W(writer)
    }
}
#[doc = "Field `CTR0_SERVICE` reader - Services subcounter 0. This resets the count value for subcounter 0 to zero. This may take up to three clk_lf cycles to take effect. Hardware clears this bit, after necessary synchronization. To ensure a pending CTR0_SERVICE write is reflected, firmware should wait until this bit reads low before attempting to write CTR0_SERVICE=1. If subcounter 0 is disabled, CTR0_SERVICE will not trigger a LOWER_ACTION and will not clear a preloaded count value."]
pub type CTR0_SERVICE_R = crate::BitReader<bool>;
#[doc = "Field `CTR0_SERVICE` writer - Services subcounter 0. This resets the count value for subcounter 0 to zero. This may take up to three clk_lf cycles to take effect. Hardware clears this bit, after necessary synchronization. To ensure a pending CTR0_SERVICE write is reflected, firmware should wait until this bit reads low before attempting to write CTR0_SERVICE=1. If subcounter 0 is disabled, CTR0_SERVICE will not trigger a LOWER_ACTION and will not clear a preloaded count value."]
pub type CTR0_SERVICE_W<'a, const O: u8> = crate::BitWriter<'a, u32, SERVICE_SPEC, bool, O>;
#[doc = "Field `CTR1_SERVICE` reader - Services subcounter 1. This resets the count value for subcounter 1 to zero. This may take up to three clk_lf cycles to take effect. Hardware clears this bit, after necessary synchronization. To ensure a pending CTR1_SERVICE write is reflected, firmware should wait until this bit reads low before attempting to write CTR1_SERVICE=1. If subcounter 1 is disabled, CTR1_SERVICE will not trigger a LOWER_ACTION and will not clear a preloaded count value."]
pub type CTR1_SERVICE_R = crate::BitReader<bool>;
#[doc = "Field `CTR1_SERVICE` writer - Services subcounter 1. This resets the count value for subcounter 1 to zero. This may take up to three clk_lf cycles to take effect. Hardware clears this bit, after necessary synchronization. To ensure a pending CTR1_SERVICE write is reflected, firmware should wait until this bit reads low before attempting to write CTR1_SERVICE=1. If subcounter 1 is disabled, CTR1_SERVICE will not trigger a LOWER_ACTION and will not clear a preloaded count value."]
pub type CTR1_SERVICE_W<'a, const O: u8> = crate::BitWriter<'a, u32, SERVICE_SPEC, bool, O>;
impl R {
    #[doc = "Bit 0 - Services subcounter 0. This resets the count value for subcounter 0 to zero. This may take up to three clk_lf cycles to take effect. Hardware clears this bit, after necessary synchronization. To ensure a pending CTR0_SERVICE write is reflected, firmware should wait until this bit reads low before attempting to write CTR0_SERVICE=1. If subcounter 0 is disabled, CTR0_SERVICE will not trigger a LOWER_ACTION and will not clear a preloaded count value."]
    #[inline(always)]
    pub fn ctr0_service(&self) -> CTR0_SERVICE_R {
        CTR0_SERVICE_R::new((self.bits & 1) != 0)
    }
    #[doc = "Bit 1 - Services subcounter 1. This resets the count value for subcounter 1 to zero. This may take up to three clk_lf cycles to take effect. Hardware clears this bit, after necessary synchronization. To ensure a pending CTR1_SERVICE write is reflected, firmware should wait until this bit reads low before attempting to write CTR1_SERVICE=1. If subcounter 1 is disabled, CTR1_SERVICE will not trigger a LOWER_ACTION and will not clear a preloaded count value."]
    #[inline(always)]
    pub fn ctr1_service(&self) -> CTR1_SERVICE_R {
        CTR1_SERVICE_R::new(((self.bits >> 1) & 1) != 0)
    }
}
impl W {
    #[doc = "Bit 0 - Services subcounter 0. This resets the count value for subcounter 0 to zero. This may take up to three clk_lf cycles to take effect. Hardware clears this bit, after necessary synchronization. To ensure a pending CTR0_SERVICE write is reflected, firmware should wait until this bit reads low before attempting to write CTR0_SERVICE=1. If subcounter 0 is disabled, CTR0_SERVICE will not trigger a LOWER_ACTION and will not clear a preloaded count value."]
    #[inline(always)]
    #[must_use]
    pub fn ctr0_service(&mut self) -> CTR0_SERVICE_W<0> {
        CTR0_SERVICE_W::new(self)
    }
    #[doc = "Bit 1 - Services subcounter 1. This resets the count value for subcounter 1 to zero. This may take up to three clk_lf cycles to take effect. Hardware clears this bit, after necessary synchronization. To ensure a pending CTR1_SERVICE write is reflected, firmware should wait until this bit reads low before attempting to write CTR1_SERVICE=1. If subcounter 1 is disabled, CTR1_SERVICE will not trigger a LOWER_ACTION and will not clear a preloaded count value."]
    #[inline(always)]
    #[must_use]
    pub fn ctr1_service(&mut self) -> CTR1_SERVICE_W<1> {
        CTR1_SERVICE_W::new(self)
    }
    #[doc = "Writes raw bits to the register."]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.0.bits(bits);
        self
    }
}
#[doc = "MCWDT Service Register\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [service](index.html) module"]
pub struct SERVICE_SPEC;
impl crate::RegisterSpec for SERVICE_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [service::R](R) reader structure"]
impl crate::Readable for SERVICE_SPEC {
    type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [service::W](W) writer structure"]
impl crate::Writable for SERVICE_SPEC {
    type Writer = W;
    const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets SERVICE to value 0"]
impl crate::Resettable for SERVICE_SPEC {
    const RESET_VALUE: Self::Ux = 0;
}