cyt4dn_b 0.0.1

Peripheral access crate for cyt4dn_b T2G family
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110

#[doc = "Register `CTL` reader"]
pub struct R(crate::R<CTL_SPEC>);
impl core::ops::Deref for R {
    type Target = crate::R<CTL_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl From<crate::R<CTL_SPEC>> for R {
    #[inline(always)]
    fn from(reader: crate::R<CTL_SPEC>) -> Self {
        R(reader)
    }
}
#[doc = "Register `CTL` writer"]
pub struct W(crate::W<CTL_SPEC>);
impl core::ops::Deref for W {
    type Target = crate::W<CTL_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl core::ops::DerefMut for W {
    #[inline(always)]
    fn deref_mut(&mut self) -> &mut Self::Target {
        &mut self.0
    }
}
impl From<crate::W<CTL_SPEC>> for W {
    #[inline(always)]
    fn from(writer: crate::W<CTL_SPEC>) -> Self {
        W(writer)
    }
}
#[doc = "Field `TR_EN` reader - Trigger output enable: '0': Disabled. The trigger output 'tr_fault' is '0'. '1': Enabled. The trigger output 'tr_fault' reflects STATUS.VALID. The trigger can be used to initiate a Datawire transfer of the FAULT data (FAULT_DATA0 through FAULT_DATA3)."]
pub type TR_EN_R = crate::BitReader<bool>;
#[doc = "Field `TR_EN` writer - Trigger output enable: '0': Disabled. The trigger output 'tr_fault' is '0'. '1': Enabled. The trigger output 'tr_fault' reflects STATUS.VALID. The trigger can be used to initiate a Datawire transfer of the FAULT data (FAULT_DATA0 through FAULT_DATA3)."]
pub type TR_EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, CTL_SPEC, bool, O>;
#[doc = "Field `OUT_EN` reader - IO output signal enable: '0': Disabled. The IO output signal 'fault_out' is '0'. The IO output enable signal 'fault_out_en' is '0'. '1': Enabled. The IO output signal 'fault_out' reflects STATUS.VALID. The IO output enable signal 'fault_out_en' is '1'."]
pub type OUT_EN_R = crate::BitReader<bool>;
#[doc = "Field `OUT_EN` writer - IO output signal enable: '0': Disabled. The IO output signal 'fault_out' is '0'. The IO output enable signal 'fault_out_en' is '0'. '1': Enabled. The IO output signal 'fault_out' reflects STATUS.VALID. The IO output enable signal 'fault_out_en' is '1'."]
pub type OUT_EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, CTL_SPEC, bool, O>;
#[doc = "Field `RESET_REQ_EN` reader - Reset request enable: '0': Disabled. '1': Enabled. The output reset request signal 'fault_reset_req' reflects STATUS.VALID. This reset causes a warm/soft/core reset. This warm/soft/core reset does not affect the fault logic STATUS, DATA0, ..., DATA3 registers (allowing for post soft reset failure analysis). The 'fault_reset_req' signals of the individual fault report structures are combined (logically OR'd) into a single SRSS 'fault_reset_req' signal."]
pub type RESET_REQ_EN_R = crate::BitReader<bool>;
#[doc = "Field `RESET_REQ_EN` writer - Reset request enable: '0': Disabled. '1': Enabled. The output reset request signal 'fault_reset_req' reflects STATUS.VALID. This reset causes a warm/soft/core reset. This warm/soft/core reset does not affect the fault logic STATUS, DATA0, ..., DATA3 registers (allowing for post soft reset failure analysis). The 'fault_reset_req' signals of the individual fault report structures are combined (logically OR'd) into a single SRSS 'fault_reset_req' signal."]
pub type RESET_REQ_EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, CTL_SPEC, bool, O>;
impl R {
    #[doc = "Bit 0 - Trigger output enable: '0': Disabled. The trigger output 'tr_fault' is '0'. '1': Enabled. The trigger output 'tr_fault' reflects STATUS.VALID. The trigger can be used to initiate a Datawire transfer of the FAULT data (FAULT_DATA0 through FAULT_DATA3)."]
    #[inline(always)]
    pub fn tr_en(&self) -> TR_EN_R {
        TR_EN_R::new((self.bits & 1) != 0)
    }
    #[doc = "Bit 1 - IO output signal enable: '0': Disabled. The IO output signal 'fault_out' is '0'. The IO output enable signal 'fault_out_en' is '0'. '1': Enabled. The IO output signal 'fault_out' reflects STATUS.VALID. The IO output enable signal 'fault_out_en' is '1'."]
    #[inline(always)]
    pub fn out_en(&self) -> OUT_EN_R {
        OUT_EN_R::new(((self.bits >> 1) & 1) != 0)
    }
    #[doc = "Bit 2 - Reset request enable: '0': Disabled. '1': Enabled. The output reset request signal 'fault_reset_req' reflects STATUS.VALID. This reset causes a warm/soft/core reset. This warm/soft/core reset does not affect the fault logic STATUS, DATA0, ..., DATA3 registers (allowing for post soft reset failure analysis). The 'fault_reset_req' signals of the individual fault report structures are combined (logically OR'd) into a single SRSS 'fault_reset_req' signal."]
    #[inline(always)]
    pub fn reset_req_en(&self) -> RESET_REQ_EN_R {
        RESET_REQ_EN_R::new(((self.bits >> 2) & 1) != 0)
    }
}
impl W {
    #[doc = "Bit 0 - Trigger output enable: '0': Disabled. The trigger output 'tr_fault' is '0'. '1': Enabled. The trigger output 'tr_fault' reflects STATUS.VALID. The trigger can be used to initiate a Datawire transfer of the FAULT data (FAULT_DATA0 through FAULT_DATA3)."]
    #[inline(always)]
    #[must_use]
    pub fn tr_en(&mut self) -> TR_EN_W<0> {
        TR_EN_W::new(self)
    }
    #[doc = "Bit 1 - IO output signal enable: '0': Disabled. The IO output signal 'fault_out' is '0'. The IO output enable signal 'fault_out_en' is '0'. '1': Enabled. The IO output signal 'fault_out' reflects STATUS.VALID. The IO output enable signal 'fault_out_en' is '1'."]
    #[inline(always)]
    #[must_use]
    pub fn out_en(&mut self) -> OUT_EN_W<1> {
        OUT_EN_W::new(self)
    }
    #[doc = "Bit 2 - Reset request enable: '0': Disabled. '1': Enabled. The output reset request signal 'fault_reset_req' reflects STATUS.VALID. This reset causes a warm/soft/core reset. This warm/soft/core reset does not affect the fault logic STATUS, DATA0, ..., DATA3 registers (allowing for post soft reset failure analysis). The 'fault_reset_req' signals of the individual fault report structures are combined (logically OR'd) into a single SRSS 'fault_reset_req' signal."]
    #[inline(always)]
    #[must_use]
    pub fn reset_req_en(&mut self) -> RESET_REQ_EN_W<2> {
        RESET_REQ_EN_W::new(self)
    }
    #[doc = "Writes raw bits to the register."]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.0.bits(bits);
        self
    }
}
#[doc = "Fault control\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [ctl](index.html) module"]
pub struct CTL_SPEC;
impl crate::RegisterSpec for CTL_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [ctl::R](R) reader structure"]
impl crate::Readable for CTL_SPEC {
    type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [ctl::W](W) writer structure"]
impl crate::Writable for CTL_SPEC {
    type Writer = W;
    const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets CTL to value 0"]
impl crate::Resettable for CTL_SPEC {
    const RESET_VALUE: Self::Ux = 0;
}