cranelift-codegen 0.66.0

//! This module exposes the machine-specific backend definition pieces.
//!
//! The MachInst infrastructure is the compiler backend, from CLIF
//! (ir::Function) to machine code. The purpose of this infrastructure is, at a
//! high level, to do instruction selection/lowering (to machine instructions),
//! register allocation, and then perform all the fixups to branches, constant
//! data references, etc., needed to actually generate machine code.
//!
//! The container for machine instructions, at various stages of construction,
//! is the `VCode` struct. We refer to a sequence of machine instructions organized
//! into basic blocks as "vcode". This is short for "virtual-register code", though
//! it's a bit of a misnomer because near the end of the pipeline, vcode has all
//! real registers. Nevertheless, the name is catchy and we like it.
//!
//! The compilation pipeline, from an `ir::Function` (already optimized as much as
//! you like by machine-independent optimization passes) onward, is as follows.
//! (N.B.: though we show the VCode separately at each stage, the passes
//! mutate the VCode in place; these are not separate copies of the code.)
//!
//! ```plain
//!
//!     ir::Function                (SSA IR, machine-independent opcodes)
//!         |
//!         |  [lower]
//!         |
//!     VCode<arch_backend::Inst>   (machine instructions:
//!         |                        - mostly virtual registers.
//!         |                        - cond branches in two-target form.
//!         |                        - branch targets are block indices.
//!         |                        - in-memory constants held by insns,
//!         |                          with unknown offsets.
//!         |                        - critical edges (actually all edges)
//!         |                          are split.)
//!         | [regalloc]
//!         |
//!     VCode<arch_backend::Inst>   (machine instructions:
//!         |                        - all real registers.
//!         |                        - new instruction sequence returned
//!         |                          out-of-band in RegAllocResult.
//!         |                        - instruction sequence has spills,
//!         |                          reloads, and moves inserted.
//!         |                        - other invariants same as above.)
//!         |
//!         | [preamble/postamble]
//!         |
//!     VCode<arch_backend::Inst>   (machine instructions:
//!         |                        - stack-frame size known.
//!         |                        - out-of-band instruction sequence
//!         |                          has preamble prepended to entry
//!         |                          block, and postamble injected before
//!         |                          every return instruction.
//!         |                        - all symbolic stack references to
//!         |                          stackslots and spillslots are resolved
//!         |                          to concrete FP-offset mem addresses.)
//!         | [block/insn ordering]
//!         |
//!     VCode<arch_backend::Inst>   (machine instructions:
//!         |                        - vcode.final_block_order is filled in.
//!         |                        - new insn sequence from regalloc is
//!         |                          placed back into vcode and block
//!         |                          boundaries are updated.)
//!         | [redundant branch/block
//!         |  removal]
//!         |
//!     VCode<arch_backend::Inst>   (machine instructions:
//!         |                        - all blocks that were just an
//!         |                          unconditional branch are removed.)
//!         |
//!         | [branch finalization
//!         |  (fallthroughs)]
//!         |
//!     VCode<arch_backend::Inst>   (machine instructions:
//!         |                        - all branches are in lowered one-
//!         |                          target form, but targets are still
//!         |                          block indices.)
//!         |
//!         | [branch finalization
//!         |  (offsets)]
//!         |
//!     VCode<arch_backend::Inst>   (machine instructions:
//!         |                        - all branch offsets from start of
//!         |                          function are known, and all branches
//!         |                          have resolved-offset targets.)
//!         |
//!         | [MemArg finalization]
//!         |
//!     VCode<arch_backend::Inst>   (machine instructions:
//!         |                        - all MemArg references to the constant
//!         |                          pool are replaced with offsets.
//!         |                        - all constant-pool data is collected
//!         |                          in the VCode.)
//!         |
//!         | [binary emission]
//!         |
//!     Vec<u8>                     (machine code!)
//!
//! ```

use crate::binemit::{CodeInfo, CodeOffset, Stackmap};
use crate::ir::condcodes::IntCC;
use crate::ir::{Function, Type};
use crate::result::CodegenResult;
use crate::settings::Flags;

use alloc::boxed::Box;
use alloc::vec::Vec;
use core::fmt::Debug;
use regalloc::RegUsageCollector;
use regalloc::{
    RealReg, RealRegUniverse, Reg, RegClass, RegUsageMapper, SpillSlot, VirtualReg, Writable,
};
use smallvec::SmallVec;
use std::string::String;
use target_lexicon::Triple;

pub mod lower;
pub use lower::*;
pub mod vcode;
pub use vcode::*;
pub mod compile;
pub use compile::*;
pub mod blockorder;
pub use blockorder::*;
pub mod abi;
pub use abi::*;
pub mod pretty_print;
pub use pretty_print::*;
pub mod buffer;
pub use buffer::*;
pub mod adapter;
pub use adapter::*;

/// A machine instruction.
pub trait MachInst: Clone + Debug {
    /// Return the registers referenced by this machine instruction along with
    /// the modes of reference (use, def, modify).
    fn get_regs(&self, collector: &mut RegUsageCollector);

    /// Map virtual registers to physical registers using the given virt->phys
    /// maps corresponding to the program points prior to, and after, this instruction.
    fn map_regs<RUM: RegUsageMapper>(&mut self, maps: &RUM);

    /// If this is a simple move, return the (source, destination) tuple of registers.
    fn is_move(&self) -> Option<(Writable<Reg>, Reg)>;

    /// Is this a terminator (branch or ret)? If so, return its type
    /// (ret/uncond/cond) and target if applicable.
    fn is_term<'a>(&'a self) -> MachTerminator<'a>;

    /// Returns true if the instruction is an epilogue placeholder.
    fn is_epilogue_placeholder(&self) -> bool;

    /// Generate a move.
    fn gen_move(to_reg: Writable<Reg>, from_reg: Reg, ty: Type) -> Self;

    /// Generate a constant into a reg.
    fn gen_constant(to_reg: Writable<Reg>, value: u64, ty: Type) -> SmallVec<[Self; 4]>;

    /// Generate a zero-length no-op.
    fn gen_zero_len_nop() -> Self;

    /// Possibly operate on a value directly in a spill-slot rather than a
    /// register. Useful if the machine has register-memory instruction forms
    /// (e.g., add directly from or directly to memory), like x86.
    fn maybe_direct_reload(&self, reg: VirtualReg, slot: SpillSlot) -> Option<Self>;

    /// Determine a register class to store the given Cranelift type.
    /// May return an error if the type isn't supported by this backend.
    fn rc_for_type(ty: Type) -> CodegenResult<RegClass>;

    /// Generate a jump to another target. Used during lowering of
    /// control flow.
    fn gen_jump(target: MachLabel) -> Self;

    /// Generate a NOP. The `preferred_size` parameter allows the caller to
    /// request a NOP of that size, or as close to it as possible. The machine
    /// backend may return a NOP whose binary encoding is smaller than the
    /// preferred size, but must not return a NOP that is larger. However,
    /// the instruction must have a nonzero size.
    fn gen_nop(preferred_size: usize) -> Self;

    /// Get the register universe for this backend.
    fn reg_universe(flags: &Flags) -> RealRegUniverse;

    /// Align a basic block offset (from start of function).  By default, no
    /// alignment occurs.
    fn align_basic_block(offset: CodeOffset) -> CodeOffset {
        offset
    }

    /// What is the worst-case instruction size emitted by this instruction type?
    fn worst_case_size() -> CodeOffset;

    /// What is the register class used for reference types (GC-observable pointers)? Can
    /// be dependent on compilation flags.
    fn ref_type_regclass(_flags: &Flags) -> RegClass;

    /// A label-use kind: a type that describes the types of label references that
    /// can occur in an instruction.
    type LabelUse: MachInstLabelUse;
}

/// A descriptor of a label reference (use) in an instruction set.
pub trait MachInstLabelUse: Clone + Copy + Debug + Eq {
    /// Required alignment for any veneer. Usually the required instruction
    /// alignment (e.g., 4 for a RISC with 32-bit instructions, or 1 for x86).
    const ALIGN: CodeOffset;

    /// What is the maximum PC-relative range (positive)? E.g., if `1024`, a
    /// label-reference fixup at offset `x` is valid if the label resolves to `x
    /// + 1024`.
    fn max_pos_range(self) -> CodeOffset;
    /// What is the maximum PC-relative range (negative)? This is the absolute
    /// value; i.e., if `1024`, then a label-reference fixup at offset `x` is
    /// valid if the label resolves to `x - 1024`.
    fn max_neg_range(self) -> CodeOffset;
    /// What is the size of code-buffer slice this label-use needs to patch in
    /// the label's value?
    fn patch_size(self) -> CodeOffset;
    /// Perform a code-patch, given the offset into the buffer of this label use
    /// and the offset into the buffer of the label's definition.
    /// It is guaranteed that, given `delta = offset - label_offset`, we will
    /// have `offset >= -self.max_neg_range()` and `offset <=
    /// self.max_pos_range()`.
    fn patch(self, buffer: &mut [u8], use_offset: CodeOffset, label_offset: CodeOffset);
    /// Can the label-use be patched to a veneer that supports a longer range?
    /// Usually valid for jumps (a short-range jump can jump to a longer-range
    /// jump), but not for e.g. constant pool references, because the constant
    /// load would require different code (one more level of indirection).
    fn supports_veneer(self) -> bool;
    /// How many bytes are needed for a veneer?
    fn veneer_size(self) -> CodeOffset;
    /// Generate a veneer. The given code-buffer slice is `self.veneer_size()`
    /// bytes long at offset `veneer_offset` in the buffer. The original
    /// label-use will be patched to refer to this veneer's offset.  A new
    /// (offset, LabelUse) is returned that allows the veneer to use the actual
    /// label. For veneers to work properly, it is expected that the new veneer
    /// has a larger range; on most platforms this probably means either a
    /// "long-range jump" (e.g., on ARM, the 26-bit form), or if already at that
    /// stage, a jump that supports a full 32-bit range, for example.
    fn generate_veneer(self, buffer: &mut [u8], veneer_offset: CodeOffset) -> (CodeOffset, Self);
}

/// Describes a block terminator (not call) in the vcode, when its branches
/// have not yet been finalized (so a branch may have two targets).
#[derive(Clone, Debug, PartialEq, Eq)]
pub enum MachTerminator<'a> {
    /// Not a terminator.
    None,
    /// A return instruction.
    Ret,
    /// An unconditional branch to another block.
    Uncond(MachLabel),
    /// A conditional branch to one of two other blocks.
    Cond(MachLabel, MachLabel),
    /// An indirect branch with known possible targets.
    Indirect(&'a [MachLabel]),
}

/// A trait describing the ability to encode a MachInst into binary machine code.
pub trait MachInstEmit: MachInst {
    /// Persistent state carried across `emit` invocations.
    type State: MachInstEmitState<Self>;
    /// Emit the instruction.
    fn emit(&self, code: &mut MachBuffer<Self>, flags: &Flags, state: &mut Self::State);
    /// Pretty-print the instruction.
    fn pretty_print(&self, mb_rru: Option<&RealRegUniverse>, state: &mut Self::State) -> String;
}

/// A trait describing the emission state carried between MachInsts when
/// emitting a function body.
pub trait MachInstEmitState<I: MachInst>: Default + Clone + Debug {
    /// Create a new emission state given the ABI object.
    fn new(abi: &dyn ABIBody<I = I>) -> Self;
    /// Update the emission state before emitting an instruction that is a
    /// safepoint.
    fn pre_safepoint(&mut self, _stackmap: Stackmap) {}
}

/// The result of a `MachBackend::compile_function()` call. Contains machine
/// code (as bytes) and a disassembly, if requested.
pub struct MachCompileResult {
    /// Machine code.
    pub buffer: MachBufferFinalized,
    /// Size of stack frame, in bytes.
    pub frame_size: u32,
    /// Disassembly, if requested.
    pub disasm: Option<String>,
}

impl MachCompileResult {
    /// Get a `CodeInfo` describing section sizes from this compilation result.
    pub fn code_info(&self) -> CodeInfo {
        let code_size = self.buffer.total_size();
        CodeInfo {
            code_size,
            jumptables_size: 0,
            rodata_size: 0,
            total_size: code_size,
        }
    }
}

/// Top-level machine backend trait, which wraps all monomorphized code and
/// allows a virtual call from the machine-independent `Function::compile()`.
pub trait MachBackend {
    /// Compile the given function.
    fn compile_function(
        &self,
        func: &Function,
        want_disasm: bool,
    ) -> CodegenResult<MachCompileResult>;

    /// Return flags for this backend.
    fn flags(&self) -> &Flags;

    /// Return triple for this backend.
    fn triple(&self) -> Triple;

    /// Return name for this backend.
    fn name(&self) -> &'static str;

    /// Return the register universe for this backend.
    fn reg_universe(&self) -> &RealRegUniverse;

    /// Machine-specific condcode info needed by TargetIsa.
    /// Condition that will be true when an IaddIfcout overflows.
    fn unsigned_add_overflow_condition(&self) -> IntCC;

    /// Machine-specific condcode info needed by TargetIsa.
    /// Condition that will be true when an IsubIfcout overflows.
    fn unsigned_sub_overflow_condition(&self) -> IntCC;
}