# ComChan (Communication Channel)
<div align="center">
**A Blazingly Fast Serial Monitor for Embedded Systems and Serial
Communication**
</div>
[](https://crates.io/crates/comchan)
[](LICENSE)
For detailed instructions with images and videos, take a look at `comchan`'s
[wiki](https://github.com/Vaishnav-Sabari-Girish/ComChan/wiki)
## Installation
Choose your preferred installation method:
### From crates.io
> [!NOTE]
> The easiest way to install ComChan is via `cargo install`
```bash
# Install from source (Standard Braille Engine)
cargo install comchan
# Install with Hardware-Accelerated 3D support (Ratty Terminal) and BLE
cargo install comchan --features ratty,ble
```
Verify the installation:
```bash
comchan --version
```
### From AUR
For Arch Linux users, ComChan is available in the AUR (thanks to
[orhun](https://github.com/orhun)!):
```bash
# ComChan with default features (No 3D/BLE)
## Using yay
yay -S comchan
## Using paru
paru -S comchan
# ComChan with 3D (no BLE)
## Using yay
yay -S comchan-ratty
## Using paru
paru -S comchan-ratty
```
### The Binary
```bash
# Using binstall (Has ratty and BLE)
cargo binstall comchan
# AUR
yay -S comchan-bin
paru -S comchan-bin
```
> [!NOTE]
> The binary is packaged with the `ratty` and `ble` features enabled, which
> means you can install the binary if your machine is unable to compile
> `comchan` with the `ratty` and `ble` features.
### Using `elda`
`comchan` can also be installed using
[`elda`](https://github.com/Mjoyufull/Elda)
```bash
elda i https://github.com/Vaishnav-Sabari-Girish/ComChan
```
> [!NOTE]
> Credits for `elda` go to **[Rikona](https://github.com/Mjoyufull)**
### From source
Build from source for the latest development version:
```bash
# Clone from GitHub
git clone https://github.com/Vaishnav-Sabari-Girish/ComChan.git
# Build and run with all features
cd ComChan
cargo run --release --features ble,ratty -- --version
```
## CLI Usage
```text
Blazingly Fast Minimal Serial Monitor with Plotting
Usage: comchan [OPTIONS]
Options:
--completions <COMPLETIONS> Generate Shell completions
-p, --port <PORT> Serial port to connect to (or 'BLE_STREAM' for Bluetooth)
--ble Start ComChan in Bluetooth Low Energy (BLE) stream mode
-r, --baud <BAUD> Baud Rate of the Serial Monitor
-l, --log <LOG_FILE> Log data into a file
-v, --verbose Enable verbose output
--plot Launch the serial plotter
-c, --config <CONFIG_FILE> Path to config file
-x, --hex Display incoming data in hex dump format
-h, --help Print help
-V, --version Print version
# ... (and many more)
```
---
## Common Commands
### BLE Streaming (Nordic UART Service)
ComChan supports streaming data wirelessly from BLE-enabled embedded devices
(like the nRF52 series) using the standard Nordic UART Service (NUS).
```bash
# Start ComChan in BLE mode to scan and connect to a peripheral
comchan --ble
```
ComChan will scan for devices, prompt you to select your target, and
automatically subscribe to the NUS TX characteristic. You can seamlessly switch
between the raw monitor and the plotter (`--plot`) using `Ctrl+P` while the BLE
stream is active.
### Basic Serial Monitor
```bash
comchan -p /dev/ttyUSB0 -r 115200
```
### Dual Monitor Side-by-Side View
Monitor two serial ports simultaneously in a split-pane TUI. Perfect for
debugging UART/CAN bridges or inter-microcontroller communication.
```bash
comchan -p /dev/ttyUSB0 /dev/ttyUSB1 -r 115200
# Test it out using the built-in simulator!
comchan --simulate -p mock1 mock2
```
> [!TIP]
> The dual monitor features independent pane auto-scrolling. Press `?` at any
> time to open the interactive help modal for shortcuts to switch active panes,
> scroll through history, and more. Logging (`--log`) and CSV streaming
> (`--csv`) will also automatically split into two separate files to prevent
> data mixing!
### RTT & Defmt Debug Probe Mode
Bypass physical UART serial ports entirely! ComChan can stream zero-latency logs
directly from your microcontroller's memory via SWD.
```bash
comchan --rtt --elf path/to/firmware.elf --chip nRF52840_xxAA
```
### Plotter & 3D Spatial Telemetry
Visualize sensor data in real-time. Use `Tab` or `2` to toggle between the 2D
Line Chart and the 3D Telemetry Dashboard.
```bash
comchan --port /dev/ttyUSB0 --baud 115200 --plot
```
---
## Features
### Current Features ✅
* **BLE Support** - Stream data wirelessly via Nordic UART Service (NUS).
* **Dual Monitor Side-by-Side View** - View two serial ports simultaneously in a
split-pane TUI with independent scrollbars and auto-split logging.
* **Read & Write Serial Data** - Monitor incoming data and send commands.
* **Instant Mode Hot-Swapping** - Seamlessly toggle between Monitor and Plotter
via `Ctrl+P`.
* **RTT & Defmt Support** - Stream logs via SWD/J-Link directly from memory.
* **Auto-Recovery & Graceful Exit** - Robust handling of connection drops and
hardware resets.
* **Terminal-Based Serial Plotter** - Visualize sensor values with auto-scaling.
* **3D Spatial Telemetry (IMU)** - Real-time 3D rotation dashboard.
* **Real-Time Session Replay** - Replay previously recorded `.log` or `.csv`
files.
* **Continuous CSV Streaming** - Stream parsed numeric data to CSV on-the-fly.
* **Hex Dump View** - Inspect raw binary payloads with `--hex` or
`--hex-pretty`.
* **Export Plot to SVG** - Save visualizations as high-quality SVGs.
* **Hardware Simulation** - Generate mock sensor data for testing without
hardware.
## Stargazers over time (Graph)
## 🧠 (mostly) Brain made
**This project was NOT vibe-coded BUT AI is still involved in some parts of
it.**
* **Generating test code:** Because it's something I always skip so I would
rather have some AI generated tests than none at all.
* **Micro-improvements:** I have used AI as an advisor to improve some bits of
code here and there. Big refactors or new features are done by my hand though.
<br>
<br>
[⬆ Back to Top](https://www.google.com/search?q=%23comchan-communication-channel)
