chia 0.1.13

use super::sanitize_int::sanitize_uint;
use super::validation_error::{atom, ErrorCode, ValidationErr};
use clvmr::allocator::{Allocator, NodePtr};
use clvmr::op_utils::u64_from_bytes;

pub fn sanitize_hash(
    a: &Allocator,
    n: NodePtr,
    size: usize,
    code: ErrorCode,
) -> Result<NodePtr, ValidationErr> {
    let buf = atom(a, n, code)?;

    if buf.len() != size {
        Err(ValidationErr(n, code))
    } else {
        Ok(n)
    }
}

pub fn parse_amount(a: &Allocator, n: NodePtr, code: ErrorCode) -> Result<u64, ValidationErr> {
    // amounts are not allowed to exceed 2^64. i.e. 8 bytes
    match sanitize_uint(a, n, 8, code) {
        Err(ValidationErr(n, ErrorCode::NegativeAmount)) => Err(ValidationErr(n, code)),
        Err(r) => Err(r),
        Ok(r) => Ok(u64_from_bytes(r)),
    }
}

// a negative height is always true. In this case the
// condition can be ignored and this functon returns 0
pub fn parse_height(a: &Allocator, n: NodePtr, code: ErrorCode) -> Result<u32, ValidationErr> {
    // heights are not allowed to exceed 2^32. i.e. 4 bytes
    match sanitize_uint(a, n, 4, code) {
        // Height is always positive, so a negative requirement is always true,
        // just like 0.
        Err(ValidationErr(_, ErrorCode::NegativeAmount)) => Ok(0),
        Err(r) => Err(r),
        Ok(r) => Ok(u64_from_bytes(r) as u32),
    }
}

// negative seconds are always valid conditions, and will return 0
pub fn parse_seconds(a: &Allocator, n: NodePtr, code: ErrorCode) -> Result<u64, ValidationErr> {
    // seconds are not allowed to exceed 2^64. i.e. 8 bytes
    match sanitize_uint(a, n, 8, code) {
        // seconds is always positive, so a negative requirement is always true,
        // we don't need to include this condition
        Err(ValidationErr(_, ErrorCode::NegativeAmount)) => Ok(0),
        Err(r) => Err(r),
        Ok(r) => Ok(u64_from_bytes(r)),
    }
}

pub fn sanitize_announce_msg(
    a: &Allocator,
    n: NodePtr,
    code: ErrorCode,
) -> Result<NodePtr, ValidationErr> {
    let buf = atom(a, n, code)?;

    if buf.len() > 1024 {
        Err(ValidationErr(n, code))
    } else {
        Ok(n)
    }
}

#[cfg(test)]
fn zero_vec(len: usize) -> Vec<u8> {
    let mut ret = Vec::<u8>::new();
    for _i in 0..len {
        ret.push(0);
    }
    ret
}

#[test]
fn test_sanitize_hash() {
    let mut a = Allocator::new();
    let short = zero_vec(31);
    let valid = zero_vec(32);
    let long = zero_vec(33);

    let short_n = a.new_atom(&short).unwrap();
    assert_eq!(
        sanitize_hash(&a, short_n, 32, ErrorCode::InvalidCondition),
        Err(ValidationErr(short_n, ErrorCode::InvalidCondition))
    );
    let valid_n = a.new_atom(&valid).unwrap();
    assert_eq!(
        sanitize_hash(&a, valid_n, 32, ErrorCode::InvalidCondition),
        Ok(valid_n)
    );
    let long_n = a.new_atom(&long).unwrap();
    assert_eq!(
        sanitize_hash(&a, long_n, 32, ErrorCode::InvalidCondition),
        Err(ValidationErr(long_n, ErrorCode::InvalidCondition))
    );

    let pair = a.new_pair(short_n, long_n).unwrap();
    assert_eq!(
        sanitize_hash(&a, pair, 32, ErrorCode::InvalidCondition),
        Err(ValidationErr(pair, ErrorCode::InvalidCondition))
    );
}

#[test]
fn test_sanitize_announce_msg() {
    let mut a = Allocator::new();
    let valid = zero_vec(1024);
    let valid_n = a.new_atom(&valid).unwrap();
    assert_eq!(
        sanitize_announce_msg(&a, valid_n, ErrorCode::InvalidCondition),
        Ok(valid_n)
    );

    let long = zero_vec(1025);
    let long_n = a.new_atom(&long).unwrap();
    assert_eq!(
        sanitize_announce_msg(&a, long_n, ErrorCode::InvalidCondition),
        Err(ValidationErr(long_n, ErrorCode::InvalidCondition))
    );

    let pair = a.new_pair(valid_n, long_n).unwrap();
    assert_eq!(
        sanitize_announce_msg(&a, pair, ErrorCode::InvalidCondition),
        Err(ValidationErr(pair, ErrorCode::InvalidCondition))
    );
}

#[cfg(test)]
fn amount_tester(buf: &[u8]) -> Result<u64, ValidationErr> {
    let mut a = Allocator::new();
    let n = a.new_atom(buf).unwrap();

    parse_amount(&mut a, n, ErrorCode::InvalidCoinAmount)
}

#[test]
fn test_sanitize_amount() {
    // negative amounts are not allowed
    // regardless of flags
    assert_eq!(
        amount_tester(&[0x80]).unwrap_err().1,
        ErrorCode::InvalidCoinAmount
    );
    assert_eq!(
        amount_tester(&[0xff]).unwrap_err().1,
        ErrorCode::InvalidCoinAmount
    );
    assert_eq!(
        amount_tester(&[0xff, 0]).unwrap_err().1,
        ErrorCode::InvalidCoinAmount
    );

    // leading zeros are somtimes necessary to make values positive
    assert_eq!(amount_tester(&[0, 0xff]), Ok(0xff));
    // but are stripped when they are redundant
    assert_eq!(
        amount_tester(&[0, 0, 0, 0xff]).unwrap_err().1,
        ErrorCode::InvalidCoinAmount
    );
    assert_eq!(
        amount_tester(&[0, 0, 0, 0x80]).unwrap_err().1,
        ErrorCode::InvalidCoinAmount
    );
    assert_eq!(
        amount_tester(&[0, 0, 0, 0x7f]).unwrap_err().1,
        ErrorCode::InvalidCoinAmount
    );
    assert_eq!(
        amount_tester(&[0, 0, 0]).unwrap_err().1,
        ErrorCode::InvalidCoinAmount
    );

    // amounts aren't allowed to be too big
    assert_eq!(
        amount_tester(&[0x7f, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0])
            .unwrap_err()
            .1,
        ErrorCode::InvalidCoinAmount
    );

    // this is small enough though
    assert_eq!(
        amount_tester(&[0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff]),
        Ok(0xffffffffffffffff)
    );
}

#[cfg(test)]
fn height_tester(buf: &[u8]) -> Result<u32, ValidationErr> {
    let mut a = Allocator::new();
    let n = a.new_atom(buf).unwrap();

    parse_height(&mut a, n, ErrorCode::AssertHeightAbsolute)
}

#[test]
fn test_parse_height() {
    // negative heights can be ignored
    assert_eq!(height_tester(&[0x80]), Ok(0));
    assert_eq!(height_tester(&[0xff]), Ok(0));
    assert_eq!(height_tester(&[0xff, 0]), Ok(0));

    // leading zeros are somtimes necessary to make values positive
    assert_eq!(height_tester(&[0, 0xff]), Ok(0xff));
    // but are stripped when they are redundant
    assert_eq!(
        height_tester(&[0, 0, 0, 0xff]).unwrap_err().1,
        ErrorCode::AssertHeightAbsolute
    );
    assert_eq!(
        height_tester(&[0, 0, 0, 0x80]).unwrap_err().1,
        ErrorCode::AssertHeightAbsolute
    );
    assert_eq!(
        height_tester(&[0, 0, 0, 0x7f]).unwrap_err().1,
        ErrorCode::AssertHeightAbsolute
    );
    assert_eq!(
        height_tester(&[0, 0, 0]).unwrap_err().1,
        ErrorCode::AssertHeightAbsolute
    );
    assert_eq!(
        height_tester(&[0]).unwrap_err().1,
        ErrorCode::AssertHeightAbsolute
    );

    // heights aren't allowed to be > 2^32 (i.e. 5 bytes)
    assert_eq!(
        height_tester(&[0x7f, 0xff, 0xff, 0xff, 0xff, 0xff])
            .unwrap_err()
            .1,
        ErrorCode::AssertHeightAbsolute
    );

    // this is small enough though
    assert_eq!(height_tester(&[0, 0xff, 0xff, 0xff, 0xff]), Ok(0xffffffff));

    let mut a = Allocator::new();
    let pair = a.new_pair(a.null(), a.null()).unwrap();
    assert_eq!(
        parse_height(&mut a, pair, ErrorCode::AssertHeightAbsolute),
        Err(ValidationErr(pair, ErrorCode::AssertHeightAbsolute))
    );
}

#[cfg(test)]
fn seconds_tester(buf: &[u8]) -> Result<u64, ValidationErr> {
    let mut a = Allocator::new();
    let n = a.new_atom(buf).unwrap();

    parse_seconds(&mut a, n, ErrorCode::AssertSecondsAbsolute)
}

#[test]
fn test_parse_seconds() {
    // negative seconds can be ignored
    assert_eq!(seconds_tester(&[0x80]), Ok(0));
    assert_eq!(seconds_tester(&[0xff]), Ok(0));
    assert_eq!(seconds_tester(&[0xff, 0]), Ok(0));

    // leading zeros are somtimes necessary to make values positive
    assert_eq!(seconds_tester(&[0, 0xff]), Ok(0xff));
    // but are stripped when they are redundant
    assert_eq!(
        seconds_tester(&[0, 0, 0, 0xff]).unwrap_err().1,
        ErrorCode::AssertSecondsAbsolute
    );
    assert_eq!(
        seconds_tester(&[0, 0, 0, 0x80]).unwrap_err().1,
        ErrorCode::AssertSecondsAbsolute
    );
    assert_eq!(
        seconds_tester(&[0, 0, 0, 0x7f]).unwrap_err().1,
        ErrorCode::AssertSecondsAbsolute
    );
    assert_eq!(
        seconds_tester(&[0, 0, 0]).unwrap_err().1,
        ErrorCode::AssertSecondsAbsolute
    );
    assert_eq!(
        seconds_tester(&[0]).unwrap_err().1,
        ErrorCode::AssertSecondsAbsolute
    );

    // seconds aren't allowed to be > 2^64 (i.e. 9 bytes)
    assert_eq!(
        seconds_tester(&[0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff],)
            .unwrap_err()
            .1,
        ErrorCode::AssertSecondsAbsolute
    );

    // this is small enough though
    assert_eq!(
        seconds_tester(&[0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff]),
        Ok(0xffffffffffffffff)
    );

    let mut a = Allocator::new();
    let pair = a.new_pair(a.null(), a.null()).unwrap();
    assert_eq!(
        parse_seconds(&mut a, pair, ErrorCode::AssertSecondsAbsolute),
        Err(ValidationErr(pair, ErrorCode::AssertSecondsAbsolute))
    );
}