chapa

Bitfield structs, batteries included!

chapa exposes a single attribute macro, #[bitfield], that turns an ordinary struct into newtype backed by a single primitive. Every field maps to an exact range of bits and gets a generated getter, setter, and with_* builder.

Features

• MSB0 and LSB0 support: Naturally write bit orders as per datasheet
• Enum fields: Use enums as bitfield fields with #[derive(BitEnum)]
• Nested bitfields: Embed one bitfield struct inside another
• Readonly fields: Suppress setter generation with readonly or a leading _ prefix
• Default values: Give fields a default = ... and #[derive(Default)] to bake them in
• Aliases: Expose extra accessor names with alias = "name" or alias = ["a", "b"]
• Overlays: Allow multiple logically distinct field groups to share the same bit range
• Bitwise operators: &, |, ^, !, &=, |=, ^= with the backing storage type work directly on the struct
• Bit extraction: extract_bits! masks a value to keep only the specified bit ranges

MSRV

Requires Rust 1.83 or newer (the generated getters, setters, and with_* builders are const fn).

Quick start

use chapa::bitfield;

// An 8-bit status register, bit 0 is the LSB
#[bitfield(u8, order = lsb0)]
#[derive(Copy, Clone, Debug, PartialEq)]
pub struct StatusReg {
    #[bits(0)] enabled: bool,
    #[bits(1..=3)] mode: u8,
    #[bits(4..=7)] _reserved: u8 // Can be ommited; "_" makes it readonly
}

let r = StatusReg::zero()
    .with_enabled(true)
    .with_mode(5);

assert_eq!(r.enabled(), true);
assert_eq!(r.mode(), 5);
assert_eq!(r.reserved(), 0);    // accessible as `reserved`, not `_reserved`

#[bitfield(...)] options

#[bits(...)] options

MSB-0 example

use chapa::bitfield;

// A 32-bit value where bit 0 is the most-significant bit
#[bitfield(u32, order = msb0)]
#[derive(Copy, Clone, Debug, PartialEq)]
pub struct ControlWord {
    #[bits(0..=3)] opcode: u8,
    #[bits(4..=7)] dst: u8,
    #[bits(8..=31, readonly)] payload: u32,
}

let cw = ControlWord::zero()
  .with_opcode(0xA)
  .with_dst(0x3);
assert_eq!(cw.raw(), 0xA300_0000);

Enum fields

Use #[derive(BitEnum)] on an enum to implement BitField, allowing it to be used as a bitfield field type. The enum must also derive Copy + Clone itself and mark exactly one variant #[fallback].

use chapa::{bitfield, BitEnum, BitField};

#[derive(Debug, PartialEq, Clone, Copy, BitEnum)]
pub enum VideoFormat {
    Ntsc = 0,
    Pal = 1,
    Mpal = 2,
    #[fallback]
    Debug = 3,
}

#[bitfield(u16, order = lsb0)]
#[derive(Copy, Clone, Debug, PartialEq)]
pub struct DisplayConfig {
    #[bits(0)] enable: bool,
    #[bits(1..=2)] fmt: VideoFormat,
}

let dc = DisplayConfig::zero()
    .with_enable(true)
    .with_fmt(VideoFormat::Pal);
assert_eq!(dc.fmt(), VideoFormat::Pal);

// Unrecognized raw values are handled two ways:
//   - from_raw (and the getter dc.fmt()) coerce them to the #[fallback] variant
//   - try_from_raw / TryFrom reject them, so corrupt input can be detected
assert_eq!(VideoFormat::from_raw(9), VideoFormat::Debug);   // coerced to #[fallback]
assert!(VideoFormat::try_from_raw(9).is_err());             // detected
assert_eq!(VideoFormat::try_from(9u8).unwrap_err().raw, 9); // TryFrom<u8>

Nested bitfields

A field whose type implements chapa::BitField (i.e. any type annotated with #[bitfield]) can be used as a nested field.

use chapa::bitfield;

#[bitfield(u8, order = msb0, width = 4)]
#[derive(Copy, Clone, Debug, PartialEq)]
pub struct Nibble {
    #[bits(0..=1)] high: u8,
    #[bits(2..=3)] low: u8,
}

#[bitfield(u32, order = msb0)]
#[derive(Copy, Clone, Debug, PartialEq)]
pub struct Word {
    #[bits(0..=3)] top: Nibble,
    #[bits(28..=31)] bot: u8,
}

Overlay groups

Fields in different overlay groups may share bit ranges. This is useful for instruction formats where the same bits are interpreted differently depending on other bits. This is useful for instruction decoding, but also to handle specific MMIO registers that change their meaning depending on certain encoded bits.

use chapa::bitfield;

#[bitfield(u32, order = msb0)]
#[derive(Copy, Clone, Debug, PartialEq)]
pub struct Instr {
    #[bits(0..=5)] opcode: u8,

    #[bits(6..=10,  overlay = "r_form")] rs: u8,
    #[bits(11..=15, overlay = "r_form")] ra: u8,
    #[bits(16..=20, overlay = "r_form")] rb: u8,

    #[bits(6..=10,  overlay = "i_form")] dst: u8,
    #[bits(11..=31, overlay = "i_form")] imm: u32,
}

Constructors and default values

Every struct gets a const fn zero() that returns an all-zero instance. There is no new(). To give a field its own starting value, add default = <expr> and #[derive(Default)]; the generated default() applies those values, while zero() and from_raw always ignore them.

default works on any field type (bool, integer, #[derive(BitEnum)] enum, or nested bitfield, e.g. default = Mode::On), including readonly ones. Values wider than the field truncate to its width, exactly like a setter. Declaring a default without #[derive(Default)] is a compile error, since the value would otherwise never be applied.

use chapa::bitfield;

#[bitfield(u16, order = lsb0)]
#[derive(Copy, Clone, Debug, PartialEq, Default)]
pub struct Config {
    #[bits(0)] enabled: bool,
    #[bits(1..=3, default = 5)] mode: u8,
    #[bits(8, default = true)] ready: bool,
}

let c = Config::default();
assert_eq!(c.mode(), 5);
assert_eq!(c.ready(), true);
assert_eq!(c.enabled(), false);   // no default -> zero

// zero() and from_raw never inject defaults
assert_eq!(Config::zero().mode(), 0);
assert_eq!(Config::from_raw(0).mode(), 0);

Bitwise operations

Every bitfield struct implements BitAnd, BitOr, BitXor, Not, BitAndAssign, BitOrAssign, and BitXorAssign against its backing storage type.

use chapa::bitfield;

#[bitfield(u32, order = msb0)]
#[derive(Copy, Clone)]
pub struct Msr {
    #[bits(16, alias = "rnd1")] random1: bool,
    #[bits(17, alias = "rnd2")] random2: bool,
}

const RESTORE_MASK: u32 = 0x0000_FF73;

let srr1: u32 = 0x0000_8000;
let msr = Msr::zero();

// No .raw() / from_raw() needed:
let updated = (msr & !RESTORE_MASK) | (srr1 & RESTORE_MASK);

Bit extraction

extract_bits! keeps only the specified bit positions from a value, zeroing all others. Bits can be single indices or inclusive start..=end ranges.

For raw integers, specify the ordering and type explicitly:

use chapa::extract_bits;

let val: u32 = 0xFFFF_FFFF;
// MSB0: keep bits 0, 5–9, 16–31
let masked = extract_bits!(msb0 u32; val; 0, 5..=9, 16..=31);
assert_eq!(masked, 0x87C0_FFFF);

// LSB0: keep bits 0–3 and 12–15
let masked = extract_bits!(lsb0 u16; val as u16; 0..=3, 12..=15);
assert_eq!(masked, 0xF00F);

For chapa bitfield structs, omit the ordering, it is deduced from the struct's #[bitfield] definition and the result is returned as the same struct type:

use chapa::{bitfield, extract_bits};

#[bitfield(u32, order = msb0)]
#[derive(Copy, Clone)]
pub struct Msr { /* ... */ }

let msr = Msr::from_raw(0xFFFF_FFFF);
let masked: Msr = extract_bits!(msr; 0..=0, 5..=9, 16..=31);
let srr1: u32 = masked.raw();

The explicit form (msb0 u32) emits const MASK: T = ..., so the mask is guaranteed to be computed at compile time. The struct form calls an #[inline] helper; LLVM should constant-fold the mask in practice, but there is no language-level guarantee.

Generated API

For a field foo: u8 spanning bits 4..=7 the macro generates:

Additionally, every struct implements the following traits: