CGGTTS

Rust package to manipulate CGGTTS (BIPM) data files

CGGTTS is specified by BIPM, Paris (Bureau International des Poids & des Mesures) and is dedicated to GNSS Time Transfer, Common View, Two Way Satellites time transfers.

CGGTTS Specifications

Supported version: 2E.
Older CGGTTS format are rejected by this library.

Cggtts file analysis

Retrieve data from a local CGGTTS compliant file:

File name must follow naming conventions, refer to specifications

    let cggtts = Cggtts::from_file("data/standard/GZSY8259.506");
    prinln!("{:#?}", cggtts);
    prinln!("{:#?}", cggtts.get_track(0));
    println!("{:?}", cggtts.get_antenna_coordinates());
    println!("{:#?}", cggtts.get_total_delay()); // refer to 'System Delays' section
    assert_eq!(cggtts.has_ionospheric_parameters(), false); // basic session
    
    let mut cggtts = Cggtts::from_file("data/ionospheric/RZOP0159.572");
    prinln!("{:#?}", cggtts);
    prinln!("{:#?}", cggtts.get_track(3));
    assert_eq!(cggtts.has_ionospheric_parameters(), true); // dual carrier session

Data analysis

Measurements are stored within the list of CggttsTracks

    let cggtts = Cggtts::from_file("data/standard/GZSY8259.506");
    let track = cggtts.get_track(0);
    prinln!("{:#?}", track);
    println!("{}", track.get_start_time());
    println!("{}", track.get_duration());
    prinln!("{:#?}", track.get_refsys_srsys());

CggttsTracks are easily manipulated

    let t = cggtts.pop(); // grab 1
    assert_eq!(cggtts.len(), 0); // consumed
    assert_eq!(t.get_azimuth(), 180.0);
    assert_eq!(t.set_elevation(), 90.0);

CGGTTS production

Using the basic constructor gets you started quickly

    let mut cggtts = Cggtts::new();
    cggtts.set_lab_agency("MyLab");
    cggtts.set_nb_channels(10);
    
    // Antenna phase center coordinates [m] 
    // is specified in IRTF spatial referencing
    cggtts.set_antenna_coordinates((+4027881.79.0,+306998.67,+4919499.36));
    println!("{:#?}", cggtts);
    assert_eq!(cggtts.get_total_delay(), 0.0); // system delays is not specified
    assert_eq!(cggtts.support_dual_frequency(), false); // not enough information
    cggtts.to_file("XXXX0159.572").unwrap(); // produce a CGGTTS

Add some measurements to a Cggtts

    let mut track = track::Cggttrack::new(); // basic track
    // customize a little
    track.set_azimuth(90.0);
    track.set_elevation(180.0);   
    track.set_duration(Cggtts::track::BIPM_SPECIFIED_TRACKING_DURATION); // standard
    cggtts.add_track(track);

Add ionospheric parameters estimates

    // read some data
    let cggtts = Cggtts::from_file("data/ionospheric/RZOP0159.572");
    assert_eq!(cggtts.has_ionospheric_parameters(), true); // yes
    // add some data
    let mut track = track::Cggttrack::new(); // basic track
    // customize
    track.set_duration(Cggtts::track::BIPM_SPECIFIED_TRACKING_DURATION); // respect standard
    track.set_refsys_srsys((1E-9,1E-12)); // got some data
    cggtts.push_track(track); // ionospheric_parameters not provided
          // will get blanked out on this line
    
    let params = (5.0E-9, 0.1E-12, 1E-9); // see (msio, smsi, isg) specifications
    track.set_ionospheric_parameters(params));
    cggtts.push_track(track);
    cggtts.to_file("RZOP0159.573"); // fully populated

System delays

When we refer to system delays we refer to propagation induced delays.

In Cggtts files, delays are always specified in [ns].
Ths library manipulates delays in seconds, but converts them back to [ns] in file operations.

Definitions

+--------+               +---------- system ---------+ +++++++++++
+        +      cable    +------+                      + counter +
+  ANT   + ------------> + RCVR + -------------------> + DUT     +
+--------+               +------+                      +         +
                            ^                          +         +
 +++++++ -------------------| ref_dly                  +         +
 + REF + --------------------------------------------> + REF     +
 +++++++                                               +++++++++++

"total" delay is defined as ANT + cable + A + B
(A+B) is defined as internal delay, propagation delay inside the receiver & the antenna
in case we do not have the (A+B) granularity, we then refer to (A+B)=system delay
cable delay refers to the RF cable delay
ref delay is the time offset between the time reference (whose name is "Reference" field), and the receiver internal clock
internal (A+B) or system delay are mutually exclusive. User is expected to use either one of them.
In case user specifies both, this lib will not crash but prefer (A+B) (advaced system definition)
when internal (A+B) delay or system delay is provided, the standard expects a Ref delay too. In case the user did not specify a Ref delay, we set it to 0 ns to still have a valid Cggtts generated.

Case of Dual Frequency CGGTTS

In dual frequency context (two carriers), total, system, internal should be specified for each carrier frequency.

cable and ref delays are not tied to a carrier frequency.

Delays and CGGTTS production interface

This library provdes an easy to use interface to specify your system when publishing a CGGTTS:

(A) basic use: system delays are not known

let mut cggtts = Cggtts::new(); // default
assert_eq!(cggtts.get_total_delay(), 0.0); // no specifications

(A*) basic use: usually the RF cable delay is easilly determined.

let mut cggtts = Cggtts::new(); // default
cggtts.set_cable_delay(10E-9); // [s] !!
assert_eq!(cggtts.get_total_delay(), 10E-9); // that's a starting point
cggtts.to_file("GZXXDD.DDD");

This definition does not match a standard definition. To still generate a standardized CGGTTS, the lib in this context declares a single frequency TOTAL DELAY of 10 ns.

(A**) basic use: total delay is known. Total delay is always tied to a GNSS constellation, like intermediate & advanced examples down below. In case you don't know, use the default constructor:

let mut cggtts = Cggtts::new(); // default
cggtts.set_cable_delay(10E-9); // [s] !!
let mut delay = CalibratedDelay::default(); // default
delay.delays.push(100E-9); // [s]!!
assert_eq!(cggtts.get_total_delay(), 110E-9);

(B) intermediate use: system delay is known and we know the RF cable delay. System delay is always tied to a constellation:

let mut cggtts = Cggtts::new(); // default
cggtts.set_cable_delay(10E-9); // [s] !!

let delay = CalibratedDelay::new(
    constellation: track::Constellation::GPS,
    values: vec![150E-9],
    codes: vec!["C1"], // GPS::C1
    report: None
 );

cggtts.set_system_delay(delay); 
assert_eq!(cggtts.get_total_delay(), 150-9+10E-9);
cggtts.to_file("GZXXDD.DDD");

(B*) same hypothesis but in a dual frequency context. Therefore we specify a delay for each carrier frequency:

let mut cggtts = Cggtts::new(); // default
cggtts.set_cable_delay(25E-9); // [s] !!

let delay = CalibratedDelay::new(
    constellation: track::Constellation::Glonass,
    values: vec![150E-9,345E-9],
    codes: vec!["C1", "P1"], // Glonass::C1&P1
    report: None
 );

cggtts.set_system_delay(delay); 
assert_eq!(cggtts.get_total_delay(), 150-9+10E-9);
cggtts.to_file("GZXXDD.DDD");

(C) advance use: (A+B) intrinsic delays are known

let mut cggtts = Cggtts::new(); // default
cggtts.set_cable_delay(25E-9); // [s] !!

let delay = CalibratedDelay::new(
    constellation: track::Constellation::Galileo,
    values: vec![50E-9],
    codes: vec!["E1"], // Galileo::E1
    report: "some-calibration-info"
 );

cggtts.set_internal_delay(delay); 
assert_eq!(cggtts.get_total_delay(), 50E-9+50E-9+25E-9);
cggtts.to_file("GZXXDD.DDD");

cggtts 0.1.6