cc2538-pac 0.1.0

#[doc = "Register `ILPR` reader"]
pub struct R(crate::R<ILPR_SPEC>);
impl core::ops::Deref for R {
    type Target = crate::R<ILPR_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl From<crate::R<ILPR_SPEC>> for R {
    #[inline(always)]
    fn from(reader: crate::R<ILPR_SPEC>) -> Self {
        R(reader)
    }
}
#[doc = "Register `ILPR` writer"]
pub struct W(crate::W<ILPR_SPEC>);
impl core::ops::Deref for W {
    type Target = crate::W<ILPR_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl core::ops::DerefMut for W {
    #[inline(always)]
    fn deref_mut(&mut self) -> &mut Self::Target {
        &mut self.0
    }
}
impl From<crate::W<ILPR_SPEC>> for W {
    #[inline(always)]
    fn from(writer: crate::W<ILPR_SPEC>) -> Self {
        W(writer)
    }
}
#[doc = "Field `ILPDVSR` reader - IrDA low-power divisor This field contains the 8-bit low-power divisor value."]
pub struct ILPDVSR_R(crate::FieldReader<u8, u8>);
impl ILPDVSR_R {
    pub(crate) fn new(bits: u8) -> Self {
        ILPDVSR_R(crate::FieldReader::new(bits))
    }
}
impl core::ops::Deref for ILPDVSR_R {
    type Target = crate::FieldReader<u8, u8>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
#[doc = "Field `ILPDVSR` writer - IrDA low-power divisor This field contains the 8-bit low-power divisor value."]
pub struct ILPDVSR_W<'a> {
    w: &'a mut W,
}
impl<'a> ILPDVSR_W<'a> {
    #[doc = r"Writes raw bits to the field"]
    #[inline(always)]
    pub unsafe fn bits(self, value: u8) -> &'a mut W {
        self.w.bits = (self.w.bits & !0xff) | (value as u32 & 0xff);
        self.w
    }
}
impl R {
    #[doc = "Bits 0:7 - IrDA low-power divisor This field contains the 8-bit low-power divisor value."]
    #[inline(always)]
    pub fn ilpdvsr(&self) -> ILPDVSR_R {
        ILPDVSR_R::new((self.bits & 0xff) as u8)
    }
}
impl W {
    #[doc = "Bits 0:7 - IrDA low-power divisor This field contains the 8-bit low-power divisor value."]
    #[inline(always)]
    pub fn ilpdvsr(&mut self) -> ILPDVSR_W {
        ILPDVSR_W { w: self }
    }
    #[doc = "Writes raw bits to the register."]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.0.bits(bits);
        self
    }
}
#[doc = "UART IrDA low-power register The ILPR register stores the 8-bit low-power counter divisor value used to derive the low-power SIR pulse width clock by dividing down the system clock (SysClk). All the bits are cleared when reset. The internal IrLPBaud16 clock is generated by dividing down SysClk according to the low-power divisor value written to ILPR. The duration of SIR pulses generated when low-power mode is enabled is three times the period of the IrLPBaud16 clock. The low-power divisor value is calculated as follows: ILPDVSR = SysClk / FIrLPBaud16 where FIrLPBaud16 is nominally 1.8432 MHz The divisor must be programmed such that FIrLPBaud16 is in the range 1.42 MHz to 2.12 MHz, resulting in a low-power pulse duration of 1.41-2.11 us (three times the period of IrLPBaud16). The minimum frequency of IrLPBaud16 ensures that pulses less than one period of IrLPBaud16 are rejected, but pulses greater than 1.4 us are accepted as valid pulses. Note: Zero is an illegal value. Programming a zero value results in no IrLPBaud16 pulses being generated.\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [ilpr](index.html) module"]
pub struct ILPR_SPEC;
impl crate::RegisterSpec for ILPR_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [ilpr::R](R) reader structure"]
impl crate::Readable for ILPR_SPEC {
    type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [ilpr::W](W) writer structure"]
impl crate::Writable for ILPR_SPEC {
    type Writer = W;
}
#[doc = "`reset()` method sets ILPR to value 0"]
impl crate::Resettable for ILPR_SPEC {
    #[inline(always)]
    fn reset_value() -> Self::Ux {
        0
    }
}