#[doc = "Register `FRMFILT0` reader"]
pub struct R(crate::R<FRMFILT0_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<FRMFILT0_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<FRMFILT0_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<FRMFILT0_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `FRMFILT0` writer"]
pub struct W(crate::W<FRMFILT0_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<FRMFILT0_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<FRMFILT0_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<FRMFILT0_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `MAX_FRAME_VERSION` reader - Used for filtering on the frame version field of the frame control field (FCF) If FCF\\[13:12\\]
(the frame version subfield) is higher than MAX_FRAME_VERSION\\[1:0\\]
and frame filtering is enabled, the frame is rejected."]
pub struct MAX_FRAME_VERSION_R(crate::FieldReader<u8, u8>);
impl MAX_FRAME_VERSION_R {
pub(crate) fn new(bits: u8) -> Self {
MAX_FRAME_VERSION_R(crate::FieldReader::new(bits))
}
}
impl core::ops::Deref for MAX_FRAME_VERSION_R {
type Target = crate::FieldReader<u8, u8>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
#[doc = "Field `MAX_FRAME_VERSION` writer - Used for filtering on the frame version field of the frame control field (FCF) If FCF\\[13:12\\]
(the frame version subfield) is higher than MAX_FRAME_VERSION\\[1:0\\]
and frame filtering is enabled, the frame is rejected."]
pub struct MAX_FRAME_VERSION_W<'a> {
w: &'a mut W,
}
impl<'a> MAX_FRAME_VERSION_W<'a> {
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x03 << 2)) | ((value as u32 & 0x03) << 2);
self.w
}
}
#[doc = "Field `PAN_COORDINATOR` reader - Should be set high when the device is a PAN coordinator, to accept frames with no destination address (as specified in Section 7.5.6.2 in IEEE 802.15.4) 0: Device is not a PAN coordinator 1: Device is a PAN coordinator"]
pub struct PAN_COORDINATOR_R(crate::FieldReader<bool, bool>);
impl PAN_COORDINATOR_R {
pub(crate) fn new(bits: bool) -> Self {
PAN_COORDINATOR_R(crate::FieldReader::new(bits))
}
}
impl core::ops::Deref for PAN_COORDINATOR_R {
type Target = crate::FieldReader<bool, bool>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
#[doc = "Field `PAN_COORDINATOR` writer - Should be set high when the device is a PAN coordinator, to accept frames with no destination address (as specified in Section 7.5.6.2 in IEEE 802.15.4) 0: Device is not a PAN coordinator 1: Device is a PAN coordinator"]
pub struct PAN_COORDINATOR_W<'a> {
w: &'a mut W,
}
impl<'a> PAN_COORDINATOR_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 1)) | ((value as u32 & 0x01) << 1);
self.w
}
}
#[doc = "Field `FRAME_FILTER_EN` reader - Enables frame filtering When this bit is set, the radio performs frame filtering as specified in section 7.5.6.2 of IEEE 802.15.4(b), third filtering level. FRMFILT0\\[6:1\\]
and FRMFILT1\\[7:1\\], together with the local address information, define the behavior of the filtering algorithm. 0: Frame filtering off. (FRMFILT0\\[6:1\\], FRMFILT1\\[7:1\\]
and SRCMATCH\\[2:0\\]
are don't care.) 1: Frame filtering on."]
pub struct FRAME_FILTER_EN_R(crate::FieldReader<bool, bool>);
impl FRAME_FILTER_EN_R {
pub(crate) fn new(bits: bool) -> Self {
FRAME_FILTER_EN_R(crate::FieldReader::new(bits))
}
}
impl core::ops::Deref for FRAME_FILTER_EN_R {
type Target = crate::FieldReader<bool, bool>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
#[doc = "Field `FRAME_FILTER_EN` writer - Enables frame filtering When this bit is set, the radio performs frame filtering as specified in section 7.5.6.2 of IEEE 802.15.4(b), third filtering level. FRMFILT0\\[6:1\\]
and FRMFILT1\\[7:1\\], together with the local address information, define the behavior of the filtering algorithm. 0: Frame filtering off. (FRMFILT0\\[6:1\\], FRMFILT1\\[7:1\\]
and SRCMATCH\\[2:0\\]
are don't care.) 1: Frame filtering on."]
pub struct FRAME_FILTER_EN_W<'a> {
w: &'a mut W,
}
impl<'a> FRAME_FILTER_EN_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !0x01) | (value as u32 & 0x01);
self.w
}
}
impl R {
#[doc = "Bits 2:3 - Used for filtering on the frame version field of the frame control field (FCF) If FCF\\[13:12\\]
(the frame version subfield) is higher than MAX_FRAME_VERSION\\[1:0\\]
and frame filtering is enabled, the frame is rejected."]
#[inline(always)]
pub fn max_frame_version(&self) -> MAX_FRAME_VERSION_R {
MAX_FRAME_VERSION_R::new(((self.bits >> 2) & 0x03) as u8)
}
#[doc = "Bit 1 - Should be set high when the device is a PAN coordinator, to accept frames with no destination address (as specified in Section 7.5.6.2 in IEEE 802.15.4) 0: Device is not a PAN coordinator 1: Device is a PAN coordinator"]
#[inline(always)]
pub fn pan_coordinator(&self) -> PAN_COORDINATOR_R {
PAN_COORDINATOR_R::new(((self.bits >> 1) & 0x01) != 0)
}
#[doc = "Bit 0 - Enables frame filtering When this bit is set, the radio performs frame filtering as specified in section 7.5.6.2 of IEEE 802.15.4(b), third filtering level. FRMFILT0\\[6:1\\]
and FRMFILT1\\[7:1\\], together with the local address information, define the behavior of the filtering algorithm. 0: Frame filtering off. (FRMFILT0\\[6:1\\], FRMFILT1\\[7:1\\]
and SRCMATCH\\[2:0\\]
are don't care.) 1: Frame filtering on."]
#[inline(always)]
pub fn frame_filter_en(&self) -> FRAME_FILTER_EN_R {
FRAME_FILTER_EN_R::new((self.bits & 0x01) != 0)
}
}
impl W {
#[doc = "Bits 2:3 - Used for filtering on the frame version field of the frame control field (FCF) If FCF\\[13:12\\]
(the frame version subfield) is higher than MAX_FRAME_VERSION\\[1:0\\]
and frame filtering is enabled, the frame is rejected."]
#[inline(always)]
pub fn max_frame_version(&mut self) -> MAX_FRAME_VERSION_W {
MAX_FRAME_VERSION_W { w: self }
}
#[doc = "Bit 1 - Should be set high when the device is a PAN coordinator, to accept frames with no destination address (as specified in Section 7.5.6.2 in IEEE 802.15.4) 0: Device is not a PAN coordinator 1: Device is a PAN coordinator"]
#[inline(always)]
pub fn pan_coordinator(&mut self) -> PAN_COORDINATOR_W {
PAN_COORDINATOR_W { w: self }
}
#[doc = "Bit 0 - Enables frame filtering When this bit is set, the radio performs frame filtering as specified in section 7.5.6.2 of IEEE 802.15.4(b), third filtering level. FRMFILT0\\[6:1\\]
and FRMFILT1\\[7:1\\], together with the local address information, define the behavior of the filtering algorithm. 0: Frame filtering off. (FRMFILT0\\[6:1\\], FRMFILT1\\[7:1\\]
and SRCMATCH\\[2:0\\]
are don't care.) 1: Frame filtering on."]
#[inline(always)]
pub fn frame_filter_en(&mut self) -> FRAME_FILTER_EN_W {
FRAME_FILTER_EN_W { w: self }
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "The frame filtering function rejects unintended frames as specified by IEEE 802.15.4, section 7.5.6.2, third filtering level. In addition, it provides filtering on: - The eight different frame types (see the FRMFILT1 register) - The reserved bits in the frame control field (FCF) The function is controlled by: - The FRMFILT0 and FRMFILT1 registers - The PAN_ID, SHORT_ADDR, and EXT_ADDR values in RAM\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [frmfilt0](index.html) module"]
pub struct FRMFILT0_SPEC;
impl crate::RegisterSpec for FRMFILT0_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [frmfilt0::R](R) reader structure"]
impl crate::Readable for FRMFILT0_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [frmfilt0::W](W) writer structure"]
impl crate::Writable for FRMFILT0_SPEC {
type Writer = W;
}
#[doc = "`reset()` method sets FRMFILT0 to value 0"]
impl crate::Resettable for FRMFILT0_SPEC {
#[inline(always)]
fn reset_value() -> Self::Ux {
0
}
}