#[doc = "Reader of register IMSC"]
pub type R = crate::R<u32, super::IMSC>;
#[doc = "Writer for register IMSC"]
pub type W = crate::W<u32, super::IMSC>;
#[doc = "Register IMSC `reset()`'s with value 0"]
impl crate::ResetValue for super::IMSC {
type Type = u32;
#[inline(always)]
fn reset_value() -> Self::Type {
0
}
}
#[doc = "Reader of field `RESERVED12`"]
pub type RESERVED12_R = crate::R<u32, u32>;
#[doc = "Write proxy for field `RESERVED12`"]
pub struct RESERVED12_W<'a> {
w: &'a mut W,
}
impl<'a> RESERVED12_W<'a> {
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u32) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x000f_ffff << 12)) | (((value as u32) & 0x000f_ffff) << 12);
self.w
}
}
#[doc = "Reader of field `EOTIM`"]
pub type EOTIM_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `EOTIM`"]
pub struct EOTIM_W<'a> {
w: &'a mut W,
}
impl<'a> EOTIM_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 11)) | (((value as u32) & 0x01) << 11);
self.w
}
}
#[doc = "Reader of field `OEIM`"]
pub type OEIM_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `OEIM`"]
pub struct OEIM_W<'a> {
w: &'a mut W,
}
impl<'a> OEIM_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 10)) | (((value as u32) & 0x01) << 10);
self.w
}
}
#[doc = "Reader of field `BEIM`"]
pub type BEIM_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `BEIM`"]
pub struct BEIM_W<'a> {
w: &'a mut W,
}
impl<'a> BEIM_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 9)) | (((value as u32) & 0x01) << 9);
self.w
}
}
#[doc = "Reader of field `PEIM`"]
pub type PEIM_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `PEIM`"]
pub struct PEIM_W<'a> {
w: &'a mut W,
}
impl<'a> PEIM_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 8)) | (((value as u32) & 0x01) << 8);
self.w
}
}
#[doc = "Reader of field `FEIM`"]
pub type FEIM_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `FEIM`"]
pub struct FEIM_W<'a> {
w: &'a mut W,
}
impl<'a> FEIM_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 7)) | (((value as u32) & 0x01) << 7);
self.w
}
}
#[doc = "Reader of field `RTIM`"]
pub type RTIM_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `RTIM`"]
pub struct RTIM_W<'a> {
w: &'a mut W,
}
impl<'a> RTIM_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 6)) | (((value as u32) & 0x01) << 6);
self.w
}
}
#[doc = "Reader of field `TXIM`"]
pub type TXIM_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `TXIM`"]
pub struct TXIM_W<'a> {
w: &'a mut W,
}
impl<'a> TXIM_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 5)) | (((value as u32) & 0x01) << 5);
self.w
}
}
#[doc = "Reader of field `RXIM`"]
pub type RXIM_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `RXIM`"]
pub struct RXIM_W<'a> {
w: &'a mut W,
}
impl<'a> RXIM_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 4)) | (((value as u32) & 0x01) << 4);
self.w
}
}
#[doc = "Reader of field `RESERVED2`"]
pub type RESERVED2_R = crate::R<u8, u8>;
#[doc = "Write proxy for field `RESERVED2`"]
pub struct RESERVED2_W<'a> {
w: &'a mut W,
}
impl<'a> RESERVED2_W<'a> {
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u8) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x03 << 2)) | (((value as u32) & 0x03) << 2);
self.w
}
}
#[doc = "Reader of field `CTSMIM`"]
pub type CTSMIM_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `CTSMIM`"]
pub struct CTSMIM_W<'a> {
w: &'a mut W,
}
impl<'a> CTSMIM_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 1)) | (((value as u32) & 0x01) << 1);
self.w
}
}
#[doc = "Reader of field `RESERVED0`"]
pub type RESERVED0_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `RESERVED0`"]
pub struct RESERVED0_W<'a> {
w: &'a mut W,
}
impl<'a> RESERVED0_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !0x01) | ((value as u32) & 0x01);
self.w
}
}
impl R {
#[doc = "Bits 12:31 - 31:12\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
#[inline(always)]
pub fn reserved12(&self) -> RESERVED12_R {
RESERVED12_R::new(((self.bits >> 12) & 0x000f_ffff) as u32)
}
#[doc = "Bit 11 - 11:11\\]
End of Transmission interrupt mask. A read returns the current mask for UART's EoT interrupt. On a write of 1, the mask of the EoT interrupt is set which means the interrupt state will be reflected in MIS.EOTMIS. A write of 0 clears the mask which means MIS.EOTMIS will not reflect the interrupt."]
#[inline(always)]
pub fn eotim(&self) -> EOTIM_R {
EOTIM_R::new(((self.bits >> 11) & 0x01) != 0)
}
#[doc = "Bit 10 - 10:10\\]
Overrun error interrupt mask. A read returns the current mask for UART's overrun error interrupt. On a write of 1, the mask of the overrun error interrupt is set which means the interrupt state will be reflected in MIS.OEMIS. A write of 0 clears the mask which means MIS.OEMIS will not reflect the interrupt."]
#[inline(always)]
pub fn oeim(&self) -> OEIM_R {
OEIM_R::new(((self.bits >> 10) & 0x01) != 0)
}
#[doc = "Bit 9 - 9:9\\]
Break error interrupt mask. A read returns the current mask for UART's break error interrupt. On a write of 1, the mask of the overrun error interrupt is set which means the interrupt state will be reflected in MIS.BEMIS. A write of 0 clears the mask which means MIS.BEMIS will not reflect the interrupt."]
#[inline(always)]
pub fn beim(&self) -> BEIM_R {
BEIM_R::new(((self.bits >> 9) & 0x01) != 0)
}
#[doc = "Bit 8 - 8:8\\]
Parity error interrupt mask. A read returns the current mask for UART's parity error interrupt. On a write of 1, the mask of the overrun error interrupt is set which means the interrupt state will be reflected in MIS.PEMIS. A write of 0 clears the mask which means MIS.PEMIS will not reflect the interrupt."]
#[inline(always)]
pub fn peim(&self) -> PEIM_R {
PEIM_R::new(((self.bits >> 8) & 0x01) != 0)
}
#[doc = "Bit 7 - 7:7\\]
Framing error interrupt mask. A read returns the current mask for UART's framing error interrupt. On a write of 1, the mask of the overrun error interrupt is set which means the interrupt state will be reflected in MIS.FEMIS. A write of 0 clears the mask which means MIS.FEMIS will not reflect the interrupt."]
#[inline(always)]
pub fn feim(&self) -> FEIM_R {
FEIM_R::new(((self.bits >> 7) & 0x01) != 0)
}
#[doc = "Bit 6 - 6:6\\]
Receive timeout interrupt mask. A read returns the current mask for UART's receive timeout interrupt. On a write of 1, the mask of the overrun error interrupt is set which means the interrupt state will be reflected in MIS.RTMIS. A write of 0 clears the mask which means this bitfield will not reflect the interrupt. The raw interrupt for receive timeout RIS.RTRIS cannot be set unless the mask is set (RTIM = 1). This is because the mask acts as an enable for power saving. That is, the same status can be read from MIS.RTMIS and RIS.RTRIS."]
#[inline(always)]
pub fn rtim(&self) -> RTIM_R {
RTIM_R::new(((self.bits >> 6) & 0x01) != 0)
}
#[doc = "Bit 5 - 5:5\\]
Transmit interrupt mask. A read returns the current mask for UART's transmit interrupt. On a write of 1, the mask of the overrun error interrupt is set which means the interrupt state will be reflected in MIS.TXMIS. A write of 0 clears the mask which means MIS.TXMIS will not reflect the interrupt."]
#[inline(always)]
pub fn txim(&self) -> TXIM_R {
TXIM_R::new(((self.bits >> 5) & 0x01) != 0)
}
#[doc = "Bit 4 - 4:4\\]
Receive interrupt mask. A read returns the current mask for UART's receive interrupt. On a write of 1, the mask of the overrun error interrupt is set which means the interrupt state will be reflected in MIS.RXMIS. A write of 0 clears the mask which means MIS.RXMIS will not reflect the interrupt."]
#[inline(always)]
pub fn rxim(&self) -> RXIM_R {
RXIM_R::new(((self.bits >> 4) & 0x01) != 0)
}
#[doc = "Bits 2:3 - 3:2\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
#[inline(always)]
pub fn reserved2(&self) -> RESERVED2_R {
RESERVED2_R::new(((self.bits >> 2) & 0x03) as u8)
}
#[doc = "Bit 1 - 1:1\\]
Clear to Send (CTS) modem interrupt mask. A read returns the current mask for UART's clear to send interrupt. On a write of 1, the mask of the overrun error interrupt is set which means the interrupt state will be reflected in MIS.CTSMMIS. A write of 0 clears the mask which means MIS.CTSMMIS will not reflect the interrupt."]
#[inline(always)]
pub fn ctsmim(&self) -> CTSMIM_R {
CTSMIM_R::new(((self.bits >> 1) & 0x01) != 0)
}
#[doc = "Bit 0 - 0:0\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
#[inline(always)]
pub fn reserved0(&self) -> RESERVED0_R {
RESERVED0_R::new((self.bits & 0x01) != 0)
}
}
impl W {
#[doc = "Bits 12:31 - 31:12\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
#[inline(always)]
pub fn reserved12(&mut self) -> RESERVED12_W {
RESERVED12_W { w: self }
}
#[doc = "Bit 11 - 11:11\\]
End of Transmission interrupt mask. A read returns the current mask for UART's EoT interrupt. On a write of 1, the mask of the EoT interrupt is set which means the interrupt state will be reflected in MIS.EOTMIS. A write of 0 clears the mask which means MIS.EOTMIS will not reflect the interrupt."]
#[inline(always)]
pub fn eotim(&mut self) -> EOTIM_W {
EOTIM_W { w: self }
}
#[doc = "Bit 10 - 10:10\\]
Overrun error interrupt mask. A read returns the current mask for UART's overrun error interrupt. On a write of 1, the mask of the overrun error interrupt is set which means the interrupt state will be reflected in MIS.OEMIS. A write of 0 clears the mask which means MIS.OEMIS will not reflect the interrupt."]
#[inline(always)]
pub fn oeim(&mut self) -> OEIM_W {
OEIM_W { w: self }
}
#[doc = "Bit 9 - 9:9\\]
Break error interrupt mask. A read returns the current mask for UART's break error interrupt. On a write of 1, the mask of the overrun error interrupt is set which means the interrupt state will be reflected in MIS.BEMIS. A write of 0 clears the mask which means MIS.BEMIS will not reflect the interrupt."]
#[inline(always)]
pub fn beim(&mut self) -> BEIM_W {
BEIM_W { w: self }
}
#[doc = "Bit 8 - 8:8\\]
Parity error interrupt mask. A read returns the current mask for UART's parity error interrupt. On a write of 1, the mask of the overrun error interrupt is set which means the interrupt state will be reflected in MIS.PEMIS. A write of 0 clears the mask which means MIS.PEMIS will not reflect the interrupt."]
#[inline(always)]
pub fn peim(&mut self) -> PEIM_W {
PEIM_W { w: self }
}
#[doc = "Bit 7 - 7:7\\]
Framing error interrupt mask. A read returns the current mask for UART's framing error interrupt. On a write of 1, the mask of the overrun error interrupt is set which means the interrupt state will be reflected in MIS.FEMIS. A write of 0 clears the mask which means MIS.FEMIS will not reflect the interrupt."]
#[inline(always)]
pub fn feim(&mut self) -> FEIM_W {
FEIM_W { w: self }
}
#[doc = "Bit 6 - 6:6\\]
Receive timeout interrupt mask. A read returns the current mask for UART's receive timeout interrupt. On a write of 1, the mask of the overrun error interrupt is set which means the interrupt state will be reflected in MIS.RTMIS. A write of 0 clears the mask which means this bitfield will not reflect the interrupt. The raw interrupt for receive timeout RIS.RTRIS cannot be set unless the mask is set (RTIM = 1). This is because the mask acts as an enable for power saving. That is, the same status can be read from MIS.RTMIS and RIS.RTRIS."]
#[inline(always)]
pub fn rtim(&mut self) -> RTIM_W {
RTIM_W { w: self }
}
#[doc = "Bit 5 - 5:5\\]
Transmit interrupt mask. A read returns the current mask for UART's transmit interrupt. On a write of 1, the mask of the overrun error interrupt is set which means the interrupt state will be reflected in MIS.TXMIS. A write of 0 clears the mask which means MIS.TXMIS will not reflect the interrupt."]
#[inline(always)]
pub fn txim(&mut self) -> TXIM_W {
TXIM_W { w: self }
}
#[doc = "Bit 4 - 4:4\\]
Receive interrupt mask. A read returns the current mask for UART's receive interrupt. On a write of 1, the mask of the overrun error interrupt is set which means the interrupt state will be reflected in MIS.RXMIS. A write of 0 clears the mask which means MIS.RXMIS will not reflect the interrupt."]
#[inline(always)]
pub fn rxim(&mut self) -> RXIM_W {
RXIM_W { w: self }
}
#[doc = "Bits 2:3 - 3:2\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
#[inline(always)]
pub fn reserved2(&mut self) -> RESERVED2_W {
RESERVED2_W { w: self }
}
#[doc = "Bit 1 - 1:1\\]
Clear to Send (CTS) modem interrupt mask. A read returns the current mask for UART's clear to send interrupt. On a write of 1, the mask of the overrun error interrupt is set which means the interrupt state will be reflected in MIS.CTSMMIS. A write of 0 clears the mask which means MIS.CTSMMIS will not reflect the interrupt."]
#[inline(always)]
pub fn ctsmim(&mut self) -> CTSMIM_W {
CTSMIM_W { w: self }
}
#[doc = "Bit 0 - 0:0\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
#[inline(always)]
pub fn reserved0(&mut self) -> RESERVED0_W {
RESERVED0_W { w: self }
}
}