#[doc = "Reader of register ADCFIFOSTAT"]
pub type R = crate::R<u32, super::ADCFIFOSTAT>;
#[doc = "Writer for register ADCFIFOSTAT"]
pub type W = crate::W<u32, super::ADCFIFOSTAT>;
#[doc = "Register ADCFIFOSTAT `reset()`'s with value 0x01"]
impl crate::ResetValue for super::ADCFIFOSTAT {
type Type = u32;
#[inline(always)]
fn reset_value() -> Self::Type {
0x01
}
}
#[doc = "Reader of field `RESERVED5`"]
pub type RESERVED5_R = crate::R<u32, u32>;
#[doc = "Write proxy for field `RESERVED5`"]
pub struct RESERVED5_W<'a> {
w: &'a mut W,
}
impl<'a> RESERVED5_W<'a> {
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub unsafe fn bits(self, value: u32) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x07ff_ffff << 5)) | (((value as u32) & 0x07ff_ffff) << 5);
self.w
}
}
#[doc = "Reader of field `OVERFLOW`"]
pub type OVERFLOW_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `OVERFLOW`"]
pub struct OVERFLOW_W<'a> {
w: &'a mut W,
}
impl<'a> OVERFLOW_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 4)) | (((value as u32) & 0x01) << 4);
self.w
}
}
#[doc = "Reader of field `UNDERFLOW`"]
pub type UNDERFLOW_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `UNDERFLOW`"]
pub struct UNDERFLOW_W<'a> {
w: &'a mut W,
}
impl<'a> UNDERFLOW_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 3)) | (((value as u32) & 0x01) << 3);
self.w
}
}
#[doc = "Reader of field `FULL`"]
pub type FULL_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `FULL`"]
pub struct FULL_W<'a> {
w: &'a mut W,
}
impl<'a> FULL_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 2)) | (((value as u32) & 0x01) << 2);
self.w
}
}
#[doc = "Reader of field `ALMOST_FULL`"]
pub type ALMOST_FULL_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `ALMOST_FULL`"]
pub struct ALMOST_FULL_W<'a> {
w: &'a mut W,
}
impl<'a> ALMOST_FULL_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !(0x01 << 1)) | (((value as u32) & 0x01) << 1);
self.w
}
}
#[doc = "Reader of field `EMPTY`"]
pub type EMPTY_R = crate::R<bool, bool>;
#[doc = "Write proxy for field `EMPTY`"]
pub struct EMPTY_W<'a> {
w: &'a mut W,
}
impl<'a> EMPTY_W<'a> {
#[doc = r"Sets the field bit"]
#[inline(always)]
pub fn set_bit(self) -> &'a mut W {
self.bit(true)
}
#[doc = r"Clears the field bit"]
#[inline(always)]
pub fn clear_bit(self) -> &'a mut W {
self.bit(false)
}
#[doc = r"Writes raw bits to the field"]
#[inline(always)]
pub fn bit(self, value: bool) -> &'a mut W {
self.w.bits = (self.w.bits & !0x01) | ((value as u32) & 0x01);
self.w
}
}
impl R {
#[doc = "Bits 5:31 - 31:5\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
#[inline(always)]
pub fn reserved5(&self) -> RESERVED5_R {
RESERVED5_R::new(((self.bits >> 5) & 0x07ff_ffff) as u32)
}
#[doc = "Bit 4 - 4:4\\]
FIFO overflow flag. 0: FIFO has not overflowed. 1: FIFO has overflowed, this flag is sticky until you flush the FIFO. When the flag is set, the ADC FIFO write pointer is static. It is not possible to add more samples to the ADC FIFO. Flush FIFO to clear the flag."]
#[inline(always)]
pub fn overflow(&self) -> OVERFLOW_R {
OVERFLOW_R::new(((self.bits >> 4) & 0x01) != 0)
}
#[doc = "Bit 3 - 3:3\\]
FIFO underflow flag. 0: FIFO has not underflowed. 1: FIFO has underflowed, this flag is sticky until you flush the FIFO. When the flag is set, the ADC FIFO read pointer is static. Read returns the previous sample that was read. Flush FIFO to clear the flag."]
#[inline(always)]
pub fn underflow(&self) -> UNDERFLOW_R {
UNDERFLOW_R::new(((self.bits >> 3) & 0x01) != 0)
}
#[doc = "Bit 2 - 2:2\\]
FIFO full flag. 0: FIFO is not full, there is less than 4 samples in the FIFO. 1: FIFO is full, there are 4 samples in the FIFO. When the flag is set, it is not possible to add more samples to the ADC FIFO. An attempt to add samples sets the OVERFLOW flag."]
#[inline(always)]
pub fn full(&self) -> FULL_R {
FULL_R::new(((self.bits >> 2) & 0x01) != 0)
}
#[doc = "Bit 1 - 1:1\\]
FIFO almost full flag. 0: There are less than 3 samples in the FIFO, or the FIFO is full. The FULL flag is also asserted in the latter case. 1: There are 3 samples in the FIFO, there is room for one more sample."]
#[inline(always)]
pub fn almost_full(&self) -> ALMOST_FULL_R {
ALMOST_FULL_R::new(((self.bits >> 1) & 0x01) != 0)
}
#[doc = "Bit 0 - 0:0\\]
FIFO empty flag. 0: FIFO contains one or more samples. 1: FIFO is empty. When the flag is set, read returns the previous sample that was read and sets the UNDERFLOW flag."]
#[inline(always)]
pub fn empty(&self) -> EMPTY_R {
EMPTY_R::new((self.bits & 0x01) != 0)
}
}
impl W {
#[doc = "Bits 5:31 - 31:5\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
#[inline(always)]
pub fn reserved5(&mut self) -> RESERVED5_W {
RESERVED5_W { w: self }
}
#[doc = "Bit 4 - 4:4\\]
FIFO overflow flag. 0: FIFO has not overflowed. 1: FIFO has overflowed, this flag is sticky until you flush the FIFO. When the flag is set, the ADC FIFO write pointer is static. It is not possible to add more samples to the ADC FIFO. Flush FIFO to clear the flag."]
#[inline(always)]
pub fn overflow(&mut self) -> OVERFLOW_W {
OVERFLOW_W { w: self }
}
#[doc = "Bit 3 - 3:3\\]
FIFO underflow flag. 0: FIFO has not underflowed. 1: FIFO has underflowed, this flag is sticky until you flush the FIFO. When the flag is set, the ADC FIFO read pointer is static. Read returns the previous sample that was read. Flush FIFO to clear the flag."]
#[inline(always)]
pub fn underflow(&mut self) -> UNDERFLOW_W {
UNDERFLOW_W { w: self }
}
#[doc = "Bit 2 - 2:2\\]
FIFO full flag. 0: FIFO is not full, there is less than 4 samples in the FIFO. 1: FIFO is full, there are 4 samples in the FIFO. When the flag is set, it is not possible to add more samples to the ADC FIFO. An attempt to add samples sets the OVERFLOW flag."]
#[inline(always)]
pub fn full(&mut self) -> FULL_W {
FULL_W { w: self }
}
#[doc = "Bit 1 - 1:1\\]
FIFO almost full flag. 0: There are less than 3 samples in the FIFO, or the FIFO is full. The FULL flag is also asserted in the latter case. 1: There are 3 samples in the FIFO, there is room for one more sample."]
#[inline(always)]
pub fn almost_full(&mut self) -> ALMOST_FULL_W {
ALMOST_FULL_W { w: self }
}
#[doc = "Bit 0 - 0:0\\]
FIFO empty flag. 0: FIFO contains one or more samples. 1: FIFO is empty. When the flag is set, read returns the previous sample that was read and sets the UNDERFLOW flag."]
#[inline(always)]
pub fn empty(&mut self) -> EMPTY_W {
EMPTY_W { w: self }
}
}