cc13x0_pac 0.10.3

Peripheral Access Crate for TI's cc13x0 microcontroller
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101

#[doc = "Register `CFG0` reader"]
pub type R = crate::R<Cfg0Spec>;
#[doc = "Register `CFG0` writer"]
pub type W = crate::W<Cfg0Spec>;
#[doc = "Field `MIN_REFILL_CYCLES` reader - 7:0\\]
This field determines the minimum number of samples (between 2^6 and 2^14) taken to re-generate entropy from the FROs after reading out a 64 bits random number. If the value of this field is zero, the number of samples is fixed to the value determined by the MAX_REFILL_CYCLES field, otherwise the minimum number of samples equals the written value times 64 (which can be up to 2^14). To ensure same entropy in all generated random numbers the value 0 should be used. Then MAX_REFILL_CYCLES controls the minimum refill interval. The number of samples defined here cannot be higher than the number defined by the 'max_refill_cycles' field (i.e. that field takes precedence). No random value will be created if min refill > max refill. This field can only be modified while CTL.TRNG_EN = 0. 0x00: Minimum samples = MAX_REFILL_CYCLES (all numbers have same entropy) 0x01: 1*2^6 samples 0x02: 2*2^6 samples ... 0xFF: 255*2^6 samples"]
pub type MinRefillCyclesR = crate::FieldReader;
#[doc = "Field `MIN_REFILL_CYCLES` writer - 7:0\\]
This field determines the minimum number of samples (between 2^6 and 2^14) taken to re-generate entropy from the FROs after reading out a 64 bits random number. If the value of this field is zero, the number of samples is fixed to the value determined by the MAX_REFILL_CYCLES field, otherwise the minimum number of samples equals the written value times 64 (which can be up to 2^14). To ensure same entropy in all generated random numbers the value 0 should be used. Then MAX_REFILL_CYCLES controls the minimum refill interval. The number of samples defined here cannot be higher than the number defined by the 'max_refill_cycles' field (i.e. that field takes precedence). No random value will be created if min refill > max refill. This field can only be modified while CTL.TRNG_EN = 0. 0x00: Minimum samples = MAX_REFILL_CYCLES (all numbers have same entropy) 0x01: 1*2^6 samples 0x02: 2*2^6 samples ... 0xFF: 255*2^6 samples"]
pub type MinRefillCyclesW<'a, REG> = crate::FieldWriter<'a, REG, 8>;
#[doc = "Field `SMPL_DIV` reader - 11:8\\]
This field directly controls the number of clock cycles between samples taken from the FROs. Default value 0 indicates that samples are taken every clock cycle, maximum value 0xF takes one sample every 16 clock cycles. This field must be set to a value such that the slowest FRO (even under worst-case conditions) has a cycle time less than twice the sample period. This field can only be modified while CTL.TRNG_EN is '0'."]
pub type SmplDivR = crate::FieldReader;
#[doc = "Field `SMPL_DIV` writer - 11:8\\]
This field directly controls the number of clock cycles between samples taken from the FROs. Default value 0 indicates that samples are taken every clock cycle, maximum value 0xF takes one sample every 16 clock cycles. This field must be set to a value such that the slowest FRO (even under worst-case conditions) has a cycle time less than twice the sample period. This field can only be modified while CTL.TRNG_EN is '0'."]
pub type SmplDivW<'a, REG> = crate::FieldWriter<'a, REG, 4>;
#[doc = "Field `RESERVED12` reader - 15:12\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
pub type Reserved12R = crate::FieldReader;
#[doc = "Field `RESERVED12` writer - 15:12\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
pub type Reserved12W<'a, REG> = crate::FieldWriter<'a, REG, 4>;
#[doc = "Field `MAX_REFILL_CYCLES` reader - 31:16\\]
This field determines the maximum number of samples (between 2^8 and 2^24) taken to re-generate entropy from the FROs after reading out a 64 bits random number. If the written value of this field is zero, the number of samples is 2^24, otherwise the number of samples equals the written value times 2^8. 0x0000: 2^24 samples 0x0001: 1*2^8 samples 0x0002: 2*2^8 samples 0x0003: 3*2^8 samples ... 0x8000: 32768*2^8 samples 0xC000: 49152*2^8 samples ... 0xFFFF: 65535*2^8 samples This field can only be modified while CTL.TRNG_EN is 0."]
pub type MaxRefillCyclesR = crate::FieldReader<u16>;
#[doc = "Field `MAX_REFILL_CYCLES` writer - 31:16\\]
This field determines the maximum number of samples (between 2^8 and 2^24) taken to re-generate entropy from the FROs after reading out a 64 bits random number. If the written value of this field is zero, the number of samples is 2^24, otherwise the number of samples equals the written value times 2^8. 0x0000: 2^24 samples 0x0001: 1*2^8 samples 0x0002: 2*2^8 samples 0x0003: 3*2^8 samples ... 0x8000: 32768*2^8 samples 0xC000: 49152*2^8 samples ... 0xFFFF: 65535*2^8 samples This field can only be modified while CTL.TRNG_EN is 0."]
pub type MaxRefillCyclesW<'a, REG> = crate::FieldWriter<'a, REG, 16, u16>;
impl R {
    #[doc = "Bits 0:7 - 7:0\\]
This field determines the minimum number of samples (between 2^6 and 2^14) taken to re-generate entropy from the FROs after reading out a 64 bits random number. If the value of this field is zero, the number of samples is fixed to the value determined by the MAX_REFILL_CYCLES field, otherwise the minimum number of samples equals the written value times 64 (which can be up to 2^14). To ensure same entropy in all generated random numbers the value 0 should be used. Then MAX_REFILL_CYCLES controls the minimum refill interval. The number of samples defined here cannot be higher than the number defined by the 'max_refill_cycles' field (i.e. that field takes precedence). No random value will be created if min refill > max refill. This field can only be modified while CTL.TRNG_EN = 0. 0x00: Minimum samples = MAX_REFILL_CYCLES (all numbers have same entropy) 0x01: 1*2^6 samples 0x02: 2*2^6 samples ... 0xFF: 255*2^6 samples"]
    #[inline(always)]
    pub fn min_refill_cycles(&self) -> MinRefillCyclesR {
        MinRefillCyclesR::new((self.bits & 0xff) as u8)
    }
    #[doc = "Bits 8:11 - 11:8\\]
This field directly controls the number of clock cycles between samples taken from the FROs. Default value 0 indicates that samples are taken every clock cycle, maximum value 0xF takes one sample every 16 clock cycles. This field must be set to a value such that the slowest FRO (even under worst-case conditions) has a cycle time less than twice the sample period. This field can only be modified while CTL.TRNG_EN is '0'."]
    #[inline(always)]
    pub fn smpl_div(&self) -> SmplDivR {
        SmplDivR::new(((self.bits >> 8) & 0x0f) as u8)
    }
    #[doc = "Bits 12:15 - 15:12\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
    #[inline(always)]
    pub fn reserved12(&self) -> Reserved12R {
        Reserved12R::new(((self.bits >> 12) & 0x0f) as u8)
    }
    #[doc = "Bits 16:31 - 31:16\\]
This field determines the maximum number of samples (between 2^8 and 2^24) taken to re-generate entropy from the FROs after reading out a 64 bits random number. If the written value of this field is zero, the number of samples is 2^24, otherwise the number of samples equals the written value times 2^8. 0x0000: 2^24 samples 0x0001: 1*2^8 samples 0x0002: 2*2^8 samples 0x0003: 3*2^8 samples ... 0x8000: 32768*2^8 samples 0xC000: 49152*2^8 samples ... 0xFFFF: 65535*2^8 samples This field can only be modified while CTL.TRNG_EN is 0."]
    #[inline(always)]
    pub fn max_refill_cycles(&self) -> MaxRefillCyclesR {
        MaxRefillCyclesR::new(((self.bits >> 16) & 0xffff) as u16)
    }
}
impl W {
    #[doc = "Bits 0:7 - 7:0\\]
This field determines the minimum number of samples (between 2^6 and 2^14) taken to re-generate entropy from the FROs after reading out a 64 bits random number. If the value of this field is zero, the number of samples is fixed to the value determined by the MAX_REFILL_CYCLES field, otherwise the minimum number of samples equals the written value times 64 (which can be up to 2^14). To ensure same entropy in all generated random numbers the value 0 should be used. Then MAX_REFILL_CYCLES controls the minimum refill interval. The number of samples defined here cannot be higher than the number defined by the 'max_refill_cycles' field (i.e. that field takes precedence). No random value will be created if min refill > max refill. This field can only be modified while CTL.TRNG_EN = 0. 0x00: Minimum samples = MAX_REFILL_CYCLES (all numbers have same entropy) 0x01: 1*2^6 samples 0x02: 2*2^6 samples ... 0xFF: 255*2^6 samples"]
    #[inline(always)]
    #[must_use]
    pub fn min_refill_cycles(&mut self) -> MinRefillCyclesW<Cfg0Spec> {
        MinRefillCyclesW::new(self, 0)
    }
    #[doc = "Bits 8:11 - 11:8\\]
This field directly controls the number of clock cycles between samples taken from the FROs. Default value 0 indicates that samples are taken every clock cycle, maximum value 0xF takes one sample every 16 clock cycles. This field must be set to a value such that the slowest FRO (even under worst-case conditions) has a cycle time less than twice the sample period. This field can only be modified while CTL.TRNG_EN is '0'."]
    #[inline(always)]
    #[must_use]
    pub fn smpl_div(&mut self) -> SmplDivW<Cfg0Spec> {
        SmplDivW::new(self, 8)
    }
    #[doc = "Bits 12:15 - 15:12\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
    #[inline(always)]
    #[must_use]
    pub fn reserved12(&mut self) -> Reserved12W<Cfg0Spec> {
        Reserved12W::new(self, 12)
    }
    #[doc = "Bits 16:31 - 31:16\\]
This field determines the maximum number of samples (between 2^8 and 2^24) taken to re-generate entropy from the FROs after reading out a 64 bits random number. If the written value of this field is zero, the number of samples is 2^24, otherwise the number of samples equals the written value times 2^8. 0x0000: 2^24 samples 0x0001: 1*2^8 samples 0x0002: 2*2^8 samples 0x0003: 3*2^8 samples ... 0x8000: 32768*2^8 samples 0xC000: 49152*2^8 samples ... 0xFFFF: 65535*2^8 samples This field can only be modified while CTL.TRNG_EN is 0."]
    #[inline(always)]
    #[must_use]
    pub fn max_refill_cycles(&mut self) -> MaxRefillCyclesW<Cfg0Spec> {
        MaxRefillCyclesW::new(self, 16)
    }
}
#[doc = "Configuration 0\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`cfg0::R`](R).  You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`cfg0::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct Cfg0Spec;
impl crate::RegisterSpec for Cfg0Spec {
    type Ux = u32;
}
#[doc = "`read()` method returns [`cfg0::R`](R) reader structure"]
impl crate::Readable for Cfg0Spec {}
#[doc = "`write(|w| ..)` method takes [`cfg0::W`](W) writer structure"]
impl crate::Writable for Cfg0Spec {
    type Safety = crate::Unsafe;
    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets CFG0 to value 0"]
impl crate::Resettable for Cfg0Spec {
    const RESET_VALUE: u32 = 0;
}