#[doc = "Register `T1TARGET` reader"]
pub type R = crate::R<T1targetSpec>;
#[doc = "Register `T1TARGET` writer"]
pub type W = crate::W<T1targetSpec>;
#[doc = "Field `VALUE` reader - 7:0\\]
Timer 1 target value. Manual Reload Mode: - Timer 1 increments until the counter value becomes equal to or greater than VALUE. - AUX_TIMER1_EV pulses high for 1 AUX clock period when the counter value is equal to or greater than VALUE. Note: When VALUE is 0, Timer 1 counts to 1. AUX_TIMER1_EV pulses high for 1 AUX clock period. Continuous Reload Mode: - Timer 1 increments until the counter value becomes equal to or greater than ( VALUE - 1), then restarts from 0. - AUX_TIMER1_EV pulses high for 1 AUX clock period when the counter value is 0, except for when you enable the timer. Note: When VALUE is less than 2, Timer 1 counter value remains 0. AUX_TIMER1_EV goes high and remains high 1 AUX clock period after you enable the timer. It is allowed to update the VALUE while the timer runs."]
pub type ValueR = crate::FieldReader;
#[doc = "Field `VALUE` writer - 7:0\\]
Timer 1 target value. Manual Reload Mode: - Timer 1 increments until the counter value becomes equal to or greater than VALUE. - AUX_TIMER1_EV pulses high for 1 AUX clock period when the counter value is equal to or greater than VALUE. Note: When VALUE is 0, Timer 1 counts to 1. AUX_TIMER1_EV pulses high for 1 AUX clock period. Continuous Reload Mode: - Timer 1 increments until the counter value becomes equal to or greater than ( VALUE - 1), then restarts from 0. - AUX_TIMER1_EV pulses high for 1 AUX clock period when the counter value is 0, except for when you enable the timer. Note: When VALUE is less than 2, Timer 1 counter value remains 0. AUX_TIMER1_EV goes high and remains high 1 AUX clock period after you enable the timer. It is allowed to update the VALUE while the timer runs."]
pub type ValueW<'a, REG> = crate::FieldWriter<'a, REG, 8>;
#[doc = "Field `RESERVED8` reader - 31:8\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
pub type Reserved8R = crate::FieldReader<u32>;
#[doc = "Field `RESERVED8` writer - 31:8\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
pub type Reserved8W<'a, REG> = crate::FieldWriter<'a, REG, 24, u32>;
impl R {
#[doc = "Bits 0:7 - 7:0\\]
Timer 1 target value. Manual Reload Mode: - Timer 1 increments until the counter value becomes equal to or greater than VALUE. - AUX_TIMER1_EV pulses high for 1 AUX clock period when the counter value is equal to or greater than VALUE. Note: When VALUE is 0, Timer 1 counts to 1. AUX_TIMER1_EV pulses high for 1 AUX clock period. Continuous Reload Mode: - Timer 1 increments until the counter value becomes equal to or greater than ( VALUE - 1), then restarts from 0. - AUX_TIMER1_EV pulses high for 1 AUX clock period when the counter value is 0, except for when you enable the timer. Note: When VALUE is less than 2, Timer 1 counter value remains 0. AUX_TIMER1_EV goes high and remains high 1 AUX clock period after you enable the timer. It is allowed to update the VALUE while the timer runs."]
#[inline(always)]
pub fn value(&self) -> ValueR {
ValueR::new((self.bits & 0xff) as u8)
}
#[doc = "Bits 8:31 - 31:8\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
#[inline(always)]
pub fn reserved8(&self) -> Reserved8R {
Reserved8R::new((self.bits >> 8) & 0x00ff_ffff)
}
}
impl W {
#[doc = "Bits 0:7 - 7:0\\]
Timer 1 target value. Manual Reload Mode: - Timer 1 increments until the counter value becomes equal to or greater than VALUE. - AUX_TIMER1_EV pulses high for 1 AUX clock period when the counter value is equal to or greater than VALUE. Note: When VALUE is 0, Timer 1 counts to 1. AUX_TIMER1_EV pulses high for 1 AUX clock period. Continuous Reload Mode: - Timer 1 increments until the counter value becomes equal to or greater than ( VALUE - 1), then restarts from 0. - AUX_TIMER1_EV pulses high for 1 AUX clock period when the counter value is 0, except for when you enable the timer. Note: When VALUE is less than 2, Timer 1 counter value remains 0. AUX_TIMER1_EV goes high and remains high 1 AUX clock period after you enable the timer. It is allowed to update the VALUE while the timer runs."]
#[inline(always)]
#[must_use]
pub fn value(&mut self) -> ValueW<T1targetSpec> {
ValueW::new(self, 0)
}
#[doc = "Bits 8:31 - 31:8\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
#[inline(always)]
#[must_use]
pub fn reserved8(&mut self) -> Reserved8W<T1targetSpec> {
Reserved8W::new(self, 8)
}
}
#[doc = "Timer 1 Target Timer 1 counter target value\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`t1target::R`](R). You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`t1target::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct T1targetSpec;
impl crate::RegisterSpec for T1targetSpec {
type Ux = u32;
}
#[doc = "`read()` method returns [`t1target::R`](R) reader structure"]
impl crate::Readable for T1targetSpec {}
#[doc = "`write(|w| ..)` method takes [`t1target::W`](W) writer structure"]
impl crate::Writable for T1targetSpec {
type Safety = crate::Unsafe;
const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets T1TARGET to value 0"]
impl crate::Resettable for T1targetSpec {
const RESET_VALUE: u32 = 0;
}