#[doc = "Register `OSCCFG` reader"]
pub type R = crate::R<OsccfgSpec>;
#[doc = "Register `OSCCFG` writer"]
pub type W = crate::W<OsccfgSpec>;
#[doc = "Field `PER_E` reader - 2:0\\]
Number of 32 KHz clocks between oscillator amplitude calibrations. When this counter expires, an oscillator amplitude compensation is triggered immediately in Active mode. When this counter expires in Powerdown mode an internal flag is set such that the amplitude compensation is postponed until the next recharge occurs. The Period will effectively be a 16 bit value coded in a 5 bit mantissa and 3 bit exponent PERIOD=(PER_M*16+15)*2^PER_E This field sets the exponent Note: Oscillator amplitude calibration is turned of when both PER_M and this bitfield are set to 0"]
pub type PerER = crate::FieldReader;
#[doc = "Field `PER_E` writer - 2:0\\]
Number of 32 KHz clocks between oscillator amplitude calibrations. When this counter expires, an oscillator amplitude compensation is triggered immediately in Active mode. When this counter expires in Powerdown mode an internal flag is set such that the amplitude compensation is postponed until the next recharge occurs. The Period will effectively be a 16 bit value coded in a 5 bit mantissa and 3 bit exponent PERIOD=(PER_M*16+15)*2^PER_E This field sets the exponent Note: Oscillator amplitude calibration is turned of when both PER_M and this bitfield are set to 0"]
pub type PerEW<'a, REG> = crate::FieldWriter<'a, REG, 3>;
#[doc = "Field `PER_M` reader - 7:3\\]
Number of 32 KHz clocks between oscillator amplitude calibrations. When this counter expires, an oscillator amplitude compensation is triggered immediately in Active mode. When this counter expires in Powerdown mode an internal flag is set such that the amplitude compensation is postponed until the next recharge occurs. The Period will effectively be a 16 bit value coded in a 5 bit mantissa and 3 bit exponent PERIOD=(PER_M*16+15)*2^PER_E This field sets the mantissa Note: Oscillator amplitude calibration is turned of when both this bitfield and PER_E are set to 0"]
pub type PerMR = crate::FieldReader;
#[doc = "Field `PER_M` writer - 7:3\\]
Number of 32 KHz clocks between oscillator amplitude calibrations. When this counter expires, an oscillator amplitude compensation is triggered immediately in Active mode. When this counter expires in Powerdown mode an internal flag is set such that the amplitude compensation is postponed until the next recharge occurs. The Period will effectively be a 16 bit value coded in a 5 bit mantissa and 3 bit exponent PERIOD=(PER_M*16+15)*2^PER_E This field sets the mantissa Note: Oscillator amplitude calibration is turned of when both this bitfield and PER_E are set to 0"]
pub type PerMW<'a, REG> = crate::FieldWriter<'a, REG, 5>;
#[doc = "Field `RESERVED8` reader - 31:8\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
pub type Reserved8R = crate::FieldReader<u32>;
#[doc = "Field `RESERVED8` writer - 31:8\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
pub type Reserved8W<'a, REG> = crate::FieldWriter<'a, REG, 24, u32>;
impl R {
#[doc = "Bits 0:2 - 2:0\\]
Number of 32 KHz clocks between oscillator amplitude calibrations. When this counter expires, an oscillator amplitude compensation is triggered immediately in Active mode. When this counter expires in Powerdown mode an internal flag is set such that the amplitude compensation is postponed until the next recharge occurs. The Period will effectively be a 16 bit value coded in a 5 bit mantissa and 3 bit exponent PERIOD=(PER_M*16+15)*2^PER_E This field sets the exponent Note: Oscillator amplitude calibration is turned of when both PER_M and this bitfield are set to 0"]
#[inline(always)]
pub fn per_e(&self) -> PerER {
PerER::new((self.bits & 7) as u8)
}
#[doc = "Bits 3:7 - 7:3\\]
Number of 32 KHz clocks between oscillator amplitude calibrations. When this counter expires, an oscillator amplitude compensation is triggered immediately in Active mode. When this counter expires in Powerdown mode an internal flag is set such that the amplitude compensation is postponed until the next recharge occurs. The Period will effectively be a 16 bit value coded in a 5 bit mantissa and 3 bit exponent PERIOD=(PER_M*16+15)*2^PER_E This field sets the mantissa Note: Oscillator amplitude calibration is turned of when both this bitfield and PER_E are set to 0"]
#[inline(always)]
pub fn per_m(&self) -> PerMR {
PerMR::new(((self.bits >> 3) & 0x1f) as u8)
}
#[doc = "Bits 8:31 - 31:8\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
#[inline(always)]
pub fn reserved8(&self) -> Reserved8R {
Reserved8R::new((self.bits >> 8) & 0x00ff_ffff)
}
}
impl W {
#[doc = "Bits 0:2 - 2:0\\]
Number of 32 KHz clocks between oscillator amplitude calibrations. When this counter expires, an oscillator amplitude compensation is triggered immediately in Active mode. When this counter expires in Powerdown mode an internal flag is set such that the amplitude compensation is postponed until the next recharge occurs. The Period will effectively be a 16 bit value coded in a 5 bit mantissa and 3 bit exponent PERIOD=(PER_M*16+15)*2^PER_E This field sets the exponent Note: Oscillator amplitude calibration is turned of when both PER_M and this bitfield are set to 0"]
#[inline(always)]
#[must_use]
pub fn per_e(&mut self) -> PerEW<OsccfgSpec> {
PerEW::new(self, 0)
}
#[doc = "Bits 3:7 - 7:3\\]
Number of 32 KHz clocks between oscillator amplitude calibrations. When this counter expires, an oscillator amplitude compensation is triggered immediately in Active mode. When this counter expires in Powerdown mode an internal flag is set such that the amplitude compensation is postponed until the next recharge occurs. The Period will effectively be a 16 bit value coded in a 5 bit mantissa and 3 bit exponent PERIOD=(PER_M*16+15)*2^PER_E This field sets the mantissa Note: Oscillator amplitude calibration is turned of when both this bitfield and PER_E are set to 0"]
#[inline(always)]
#[must_use]
pub fn per_m(&mut self) -> PerMW<OsccfgSpec> {
PerMW::new(self, 3)
}
#[doc = "Bits 8:31 - 31:8\\]
Software should not rely on the value of a reserved. Writing any other value than the reset value may result in undefined behavior."]
#[inline(always)]
#[must_use]
pub fn reserved8(&mut self) -> Reserved8W<OsccfgSpec> {
Reserved8W::new(self, 8)
}
}
#[doc = "Oscillator Configuration This register sets the period for Amplitude compensation requests sent to the oscillator control system. The amplitude compensations is only applicable when XOSC_HF is running in low power mode.\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`osccfg::R`](R). You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`osccfg::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct OsccfgSpec;
impl crate::RegisterSpec for OsccfgSpec {
type Ux = u32;
}
#[doc = "`read()` method returns [`osccfg::R`](R) reader structure"]
impl crate::Readable for OsccfgSpec {}
#[doc = "`write(|w| ..)` method takes [`osccfg::W`](W) writer structure"]
impl crate::Writable for OsccfgSpec {
type Safety = crate::Unsafe;
const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets OSCCFG to value 0"]
impl crate::Resettable for OsccfgSpec {
const RESET_VALUE: u32 = 0;
}