cadmpeg-0.6.5 is not a library.

cadmpeg

cadmpeg inspects native CAD containers, dumps supported model data into CADIR, checks and compares CADIR models, and exports CADIR, STEP Part 21 (AP203, AP214, or AP242), and bounded IGES 5.1, 5.2, or 5.3 Fixed ASCII. It also writes supported .FCStd, .f3d, .sldprt, and .3dm models.

Native codecs transfer different subsets of geometry, topology, design intent, presentation, and metadata. Check format support before relying on a conversion path.

Install

Install with Homebrew:

brew install cadmpeg/tap/cadmpeg

Or use the installer for macOS and Linux:

curl --proto '=https' --tlsv1.2 -LsSf \
  https://github.com/cadmpeg/cadmpeg/releases/latest/download/cadmpeg-installer.sh | sh

Or install from crates.io:

cargo install cadmpeg

Convert a model

convert decodes the input, checks the resulting CADIR, then exports it:

cadmpeg convert bracket.f3d -o bracket.step
cadmpeg convert bracket.f3d -o bracket.ap242.step --to step:ap242-e3
cadmpeg convert bracket.f3d -o bracket.step --reject-lossy=export
cadmpeg convert bracket.f3d -o bracket.igs --to 5.3
cadmpeg convert bracket.f3d -o bracket.3dm --to rhino:archive-80

`--to FORMAT[:DIALECT]`

One flag names the output format and, when you want to say so, the dialect of it. --to is a spelling of -f/--format; the three are the same flag.

--to rhino:archive-80 names both halves. The format half may use any spelling --to accepts, so --to 3dm:archive-80 is the same request.
--to step names the format alone. It says which kind of file to write, not which dialect of it, so a same-format conversion still preserves the input's dialect.
--to 5.1 names a dialect of the format the output path implies. Each format's own short vocabulary works here: 5.1 for IGES, 60 for Rhino, ap242e3 for STEP. A bare value is read as a format first, and no dialect spelling collides with a format name.

Omitting --to is the identity default: converting a file to its own format keeps the dialect it already is, and converting across formats writes the target format's default. cadmpeg dialects FORMAT lists every id, and cadmpeg inspect FILE prints the id of the file in front of you — the same string you would pass to --to.

The CLI inspect path calls cadmpeg_registry::resolve_and_inspect_with. cadmpeg_registry::identify is the candidate-reporting entry point: it retains equal-confidence candidates instead of resolving them to one source.

A dialect the writer cannot produce is refused by name, with the whole catalog of what it can produce, rather than silently rewritten. For IGES this covers Compressed ASCII and Binary sources: converting one back to IGES replays the original bytes, which the writer could not synthesize, and asking for a different target is a synthesis request that says so.

The output extension selects step, iges, fcstd, f3d, sldprt, rhino, or cadir. Pass --to when the filename does not identify the format, or when a text format (cadir, step) goes to standard output:

cadmpeg convert bracket.f3d --to step > bracket.step

Binary formats (fcstd, f3d, sldprt, rhino) are refused on standard output, because that spelling is nearly always --input-format (alias --from) written as --format; pass -o FILE or, for a deliberate binary pipe, --binary-stdout.

Conversion stops before export if the check finds errors in what the output writes. An error in data the output format does not carry, for example feature history in a STEP export, stays in the report and does not stop the write. Conversion also refuses geometry output when decoding transfers no geometry. --allow-errors and --allow-empty write the current result anyway. They leave model data unchanged.

convert decodes a native source only as deeply as the output needs: STEP, IGES, and Rhino output decodes geometry and skips design intent, so the decode report lists no loss in sketches, features, or history. --full-decode, and every --reject-lossy scope, decode the whole source whatever the output.

Inspect, dump, and check

Inspect a native container without decoding its model:

cadmpeg inspect bracket.f3d
cadmpeg inspect bracket.f3d --json

Dump a native file to canonical CADIR JSON:

cadmpeg dump bracket.f3d -o bracket.cadir.json

Without --output, artifact-producing commands write only the artifact to standard output. Diagnostics and loss summaries go to standard error, so redirection remains safe.

Check either CADIR or a supported native file:

cadmpeg check bracket.cadir.json
cadmpeg check bracket.f3d --json

--container-only stops native decoding before geometry and records container depth. It is useful for container diagnostics. convert writes such a document to CADIR only: every other output refuses it (insufficient_depth, exit 1), and --allow-empty does not override that.

Read raw bytes

cadmpeg inspect also carries byte tools that work on any file, decoded or not. Every offset and length argument accepts 0x hexadecimal or decimal, and _ between digits.

cadmpeg inspect hex part.prt --offset 0x40 --len 0x80   # dump with an ASCII gutter
cadmpeg inspect read part.prt --type u32 --offset 0x40  # one scalar, decimal and hex
cadmpeg inspect read part.prt --type f64 --offset 0x100 --count 8 --stride 24
cadmpeg inspect find part.prt --encoding hex '4d5a??00'          # `??` is a byte wildcard
cadmpeg inspect find part.prt --encoding utf16le Extrude
cadmpeg inspect strings part.prt --min 6 --encoding both
cadmpeg inspect struct part.prt --offset 0x100 --count 4 \
  --layout 'u32le:id,pad4,f64le:x,f64le:y,f64le:z'
cadmpeg inspect container part.f3d                      # ZIP or CFB members
cadmpeg inspect extract part.f3d 'Design/Streams.dat' -o streams.dat
cadmpeg inspect cmp probe-a.prt probe-b.prt             # positional byte compare

--endian le and --endian be select the byte order for read; little-endian is the default. read --count N walks a record array, stepping --stride bytes and defaulting to the scalar width.

Common alternative spellings are accepted: --length for --len, --min-len and --min-length for --min, --start for --offset, --step for --stride, -n for --count, and --input FILE for the positional file on single-input tools. cadmpeg inspect bytes <tool> runs the same tool as cadmpeg inspect <tool>. find FILE NEEDLE --encoding hex|ascii|utf16le selects the encoding of the positional pattern. Text or hex values on read --type produce an error that names the corresponding tool. find stops at --max hits and says so, --max 0 reports every hit, and --context N dumps N bytes around each hit.

--layout is a comma-separated record spec with no implicit alignment:

Field	Meaning
`u8`, `i8`	One byte. A byte-order suffix is rejected.
`u16le`, `i32be`, `f64le`, …	A wide scalar. The `le` or `be` suffix is required.
`bytesN`	`N` raw bytes, printed as hexadecimal.
`padN`	`N` bytes skipped and not printed. Takes no name.

Every field except padN accepts an optional :name; unnamed fields are called f<index>. struct --count N decodes N consecutive records and reports an error rather than a partial record when the run passes end of file.

inspect container lists ZIP or CFB members. ZIP columns are header/data/packed/unpacked/method/crc32/name, so a hex dump of an entry follows directly. CFB columns are id/kind/size/alloc/path; size and alloc are empty for storages. --json prints the same listing as versioned JSON with raw names and container_kind zip or cfb. Names in the table are single-quoted because Fusion .f3d entry names hold [ and ], which a shell reads as a glob. inspect extract FILE MEMBER writes one ZIP entry's decompressed, CRC-checked bytes, or one CFB stream, to -o FILE or standard output; the member name matches byte-exactly, brackets included, where unzip reads it as a glob and fails. Other container families are listed by cadmpeg inspect FILE through their codec.

inspect cmp compares byte n of one file with byte n of the other. It reports the first differing offset, the differing byte count, and the differing spans. --gap merges two spans separated by that many equal bytes or fewer. It exits 1 if the files are not identical, including length-only (Unix cmp contract). cadmpeg diff compares decoded models.

A file whose name is also a subcommand name, such as hex, is read as the subcommand. Write ./hex for such a file.

Compare models

diff compares two decoded models structurally:

cadmpeg diff before.cadir.json after.cadir.json
cadmpeg diff before.f3d after.f3d --json

It reports unit, tolerance, arena membership, and modified entity fields. Exit status 1 indicates a difference.

Inputs and outputs

The built-in codecs recognize .f3d, .FCStd, .ipt, .iam, .sldprt, .3dm, .CATPart, IGES, STEP, bare ASM/ACIS .sat/.smt/.smb/.sab streams, and the NX and Creo .prt layouts by content. Commands that load models also accept CADIR JSON. Use --input-format (alias --from) to bypass detection for an ambiguous or extensionless input. Every command that takes one input file also accepts --input FILE as a spelling of the positional; the two-file commands (diff, inspect cmp, inspect extract) take their inputs positionally only.

Output formats are:

cadir for canonical CADIR JSON; json is an alias.
step for ISO 10303-21 Part 21; iges for IGES fixed ASCII.
fcstd, f3d, rhino, and sldprt for the native writers' supported subsets.

cadmpeg formats lists what this build reads and writes. cadmpeg dialects [FORMAT] lists the dialects of each format: the id, how well cadmpeg reads it, whether anything writes it, and which of them are write targets of this build's encoders.

Native writers use retained source data where the format requires it, and reject unsupported edits. The format support page defines each reader and writer's current semantic coverage.

File output is atomic. cadmpeg refuses to replace its input or an existing output unless --force is present. An explicit --to format takes precedence over a conflicting output extension and emits a warning.

Losses and machine-readable reports

Native decoding prints whether geometry transferred and lists known losses. STEP export reports omitted, reduced, or normalized content. To save a versioned JSON record of a dump or convert operation, pass --report:

cadmpeg convert bracket.f3d -o bracket.step \
  --report bracket.conversion.json

The command report contains decode, check, and export sections when those stages ran. inspect --json, inspect container --json, check --json, and diff --json write versioned JSON directly to standard output.

inspect, check, and diff produce no artifact beside the report, so they also accept -o and --output for the report path. Every command refuses to replace an existing report or artifact unless --force is present. Check findings live under .check_report.findings; cadmpeg check prints the error count and exits 1 on the same error and blocking findings.

Query reports

query projects one named view from a JSON artifact without jq: it reads a command report, a decoded CADIR document, or a <stem>.fidelity.json decode sidecar, detects which one it was given, and prints the view. Aggregate views print tab-separated rows with a header; item, graph, and join print pretty-printed JSON records.

cadmpeg check bracket.f3d -o report.json
cadmpeg query findings report.json     # severity  check  entity  message
cadmpeg query losses report.json       # severity  code   message
cadmpeg query coverage report.json     # decode coverage counts
cadmpeg query counts bracket.cadir.json  # per-arena entity counts; alias: arenas
cadmpeg query item bracket.cadir.json model.faces FACE_ID  # one record; alias: record
cadmpeg query schema types model.features    # the arena's IR record type (no FILE)
cadmpeg query schema file part.cadir.json native.nx.class_definitions  # inferred native fields
cadmpeg query graph bracket.cadir.json model.features ID --hops 1
cadmpeg query graph bracket.cadir.json model.features ID --follow native_ref --reverse
cadmpeg query join bracket.cadir.json model.features native.rhino.unknowns \
  --left-key native_ref --right-key id
cadmpeg query summary report.json      # artifact kind and section counts
cadmpeg query fidelity part.cadir.fidelity.json  # retained source records
cadmpeg query fidelity part.cadir.fidelity.json --stream S -o s.bin  # extract

counts on a CADIR document lists arena lengths for model and every native.<codec> namespace; on a check report it lists entity_counts. item uses the same dotted arena names as query counts --json (model.<arena> or native.<codec>.<arena>; a bare name means model.<arena>). It matches the JSON-string id field exactly or as a unique suffix, accepts several IDs in one call, and with no ID prints the first record (--head N for the first N). --fields a,b.c projects those paths as TSV (projection only — no --where). graph starts from the same FILE ARENA [ID...] selection and walks identity references: a string is an edge when it equals another record's id in this document. --hops N (default 1) is the maximum edge length; 0 emits only the starts. --follow PATH,... keeps those field paths only (exact match). --reverse walks incoming references. --max-paths (default 10000) truncates with a note on standard error and still exits 0. join matches two arenas on required --left-key and --right-key paths (matched inner join, unmatched left anti-join, all grouped rights). --right-file joins two documents by key value only. schema with no file prints the IR's compile-time record type for a model arena — every field, whether it is required, and every variant of a tagged union — or, bare, every model arena and its element type (sidecar prints the decode-sidecar shape). schema FILE ARENA infers native (and other) arena fields from the records: each dotted path's presence, JSON type, an example, and a relation column (id for the record identity, ref / refs for fields whose values resolve to a record id in this document or match the identity grammar). Use relation=ref|refs paths as graph --follow fields and as join keys. An unknown arena name lists every addressable arena and its entry count. Which arenas a document actually has also comes from counts. fidelity lists a decode sidecar's retained source records (the extraction address space) and, with --stream NAME, reassembles that stream's retained bytes byte-exactly into -o FILE — refusing gapped extents and extent-only retention loudly rather than splicing or writing empty output. An empty or not-run section is not an error: the header prints, a note goes to standard error, and the exit status stays 0. A view the artifact kind can never carry exits 2 and names the command that produces the right artifact. --json wraps the projection in the versioned envelope, and - reads standard input.

Exit status

Verdict commands exit 1 on a negative verdict. Other commands do not use 1. Exit 2 is operational on every command.

0: the requested operation completed; a verdict command had a positive verdict when it ran.
1: negative verdict. Verdict commands are convert (refused write), check (failed check), diff (models differ), and inspect cmp (files differ). inspect cmp exits 1 if the files are not identical, including length-only (Unix cmp contract).
2: operational error, including invalid arguments, unrecognized input, decode or encode failure, and file-system errors.

Non-verdict commands are dump, query, and inspect (except inspect cmp).

Run cadmpeg help <command> for the complete options of a command.

cadmpeg 0.6.5