#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
#[doc = "0x00 - Transmit configuration register"]
pub transmit_config: TRANSMIT_CONFIG,
#[doc = "0x04 - Receive configuration register"]
pub receive_config: RECEIVE_CONFIG,
#[doc = "0x08 - Bit period control register"]
pub bit_period: BIT_PERIOD,
#[doc = "0x0c - Data configuration register"]
pub data_config: DATA_CONFIG,
#[doc = "0x10 - IR-mode transmit position control"]
pub transmit_position: TRANSMIT_POSITION,
#[doc = "0x14 - IR-mode receive position control"]
pub receive_position: RECEIVE_POSITION,
#[doc = "0x18 - Receive Time-Out interrupt control"]
pub receive_timeout: RECEIVE_TIMEOUT,
#[doc = "0x1c - Manual override of flow control signal"]
pub signal_override: SIGNAL_OVERRIDE,
#[doc = "0x20 - Interrupt state register"]
pub interrupt_state: INTERRUPT_STATE,
#[doc = "0x24 - Interrupt mask register"]
pub interrupt_mask: INTERRUPT_MASK,
#[doc = "0x28 - Clear interrupt register"]
pub interrupt_clear: INTERRUPT_CLEAR,
#[doc = "0x2c - Interrupt enable register"]
pub interrupt_enable: INTERRUPT_ENABLE,
#[doc = "0x30 - Bus state register"]
pub bus_state: BUS_STATE,
#[doc = "0x34 - Auto baudrate detection register"]
pub auto_baudrate: AUTO_BAUDRATE,
_reserved14: [u8; 0x48],
#[doc = "0x80 - FIFO configuration register 0"]
pub fifo_config_0: FIFO_CONFIG_0,
#[doc = "0x84 - FIFO configuration register 1"]
pub fifo_config_1: FIFO_CONFIG_1,
#[doc = "0x88 - FIFO write data register"]
pub data_write: DATA_WRITE,
#[doc = "0x8c - FIFO read data register"]
pub data_read: DATA_READ,
}
#[doc = "transmit_config (rw) register accessor: an alias for `Reg<TRANSMIT_CONFIG_SPEC>`"]
pub type TRANSMIT_CONFIG = crate::Reg<transmit_config::TRANSMIT_CONFIG_SPEC>;
#[doc = "Transmit configuration register"]
pub mod transmit_config;
#[doc = "receive_config (rw) register accessor: an alias for `Reg<RECEIVE_CONFIG_SPEC>`"]
pub type RECEIVE_CONFIG = crate::Reg<receive_config::RECEIVE_CONFIG_SPEC>;
#[doc = "Receive configuration register"]
pub mod receive_config;
#[doc = "bit_period (rw) register accessor: an alias for `Reg<BIT_PERIOD_SPEC>`"]
pub type BIT_PERIOD = crate::Reg<bit_period::BIT_PERIOD_SPEC>;
#[doc = "Bit period control register"]
pub mod bit_period;
#[doc = "data_config (rw) register accessor: an alias for `Reg<DATA_CONFIG_SPEC>`"]
pub type DATA_CONFIG = crate::Reg<data_config::DATA_CONFIG_SPEC>;
#[doc = "Data configuration register"]
pub mod data_config;
#[doc = "transmit_position (rw) register accessor: an alias for `Reg<TRANSMIT_POSITION_SPEC>`"]
pub type TRANSMIT_POSITION = crate::Reg<transmit_position::TRANSMIT_POSITION_SPEC>;
#[doc = "IR-mode transmit position control"]
pub mod transmit_position;
#[doc = "receive_position (rw) register accessor: an alias for `Reg<RECEIVE_POSITION_SPEC>`"]
pub type RECEIVE_POSITION = crate::Reg<receive_position::RECEIVE_POSITION_SPEC>;
#[doc = "IR-mode receive position control"]
pub mod receive_position;
#[doc = "receive_timeout (rw) register accessor: an alias for `Reg<RECEIVE_TIMEOUT_SPEC>`"]
pub type RECEIVE_TIMEOUT = crate::Reg<receive_timeout::RECEIVE_TIMEOUT_SPEC>;
#[doc = "Receive Time-Out interrupt control"]
pub mod receive_timeout;
#[doc = "signal_override (rw) register accessor: an alias for `Reg<SIGNAL_OVERRIDE_SPEC>`"]
pub type SIGNAL_OVERRIDE = crate::Reg<signal_override::SIGNAL_OVERRIDE_SPEC>;
#[doc = "Manual override of flow control signal"]
pub mod signal_override;
#[doc = "interrupt_state (r) register accessor: an alias for `Reg<INTERRUPT_STATE_SPEC>`"]
pub type INTERRUPT_STATE = crate::Reg<interrupt_state::INTERRUPT_STATE_SPEC>;
#[doc = "Interrupt state register"]
pub mod interrupt_state;
#[doc = "interrupt_mask (rw) register accessor: an alias for `Reg<INTERRUPT_MASK_SPEC>`"]
pub type INTERRUPT_MASK = crate::Reg<interrupt_mask::INTERRUPT_MASK_SPEC>;
#[doc = "Interrupt mask register"]
pub mod interrupt_mask;
#[doc = "interrupt_clear (w) register accessor: an alias for `Reg<INTERRUPT_CLEAR_SPEC>`"]
pub type INTERRUPT_CLEAR = crate::Reg<interrupt_clear::INTERRUPT_CLEAR_SPEC>;
#[doc = "Clear interrupt register"]
pub mod interrupt_clear;
#[doc = "interrupt_enable (rw) register accessor: an alias for `Reg<INTERRUPT_ENABLE_SPEC>`"]
pub type INTERRUPT_ENABLE = crate::Reg<interrupt_enable::INTERRUPT_ENABLE_SPEC>;
#[doc = "Interrupt enable register"]
pub mod interrupt_enable;
#[doc = "bus_state (r) register accessor: an alias for `Reg<BUS_STATE_SPEC>`"]
pub type BUS_STATE = crate::Reg<bus_state::BUS_STATE_SPEC>;
#[doc = "Bus state register"]
pub mod bus_state;
#[doc = "auto_baudrate (r) register accessor: an alias for `Reg<AUTO_BAUDRATE_SPEC>`"]
pub type AUTO_BAUDRATE = crate::Reg<auto_baudrate::AUTO_BAUDRATE_SPEC>;
#[doc = "Auto baudrate detection register"]
pub mod auto_baudrate;
#[doc = "fifo_config_0 (rw) register accessor: an alias for `Reg<FIFO_CONFIG_0_SPEC>`"]
pub type FIFO_CONFIG_0 = crate::Reg<fifo_config_0::FIFO_CONFIG_0_SPEC>;
#[doc = "FIFO configuration register 0"]
pub mod fifo_config_0;
#[doc = "fifo_config_1 (rw) register accessor: an alias for `Reg<FIFO_CONFIG_1_SPEC>`"]
pub type FIFO_CONFIG_1 = crate::Reg<fifo_config_1::FIFO_CONFIG_1_SPEC>;
#[doc = "FIFO configuration register 1"]
pub mod fifo_config_1;
#[doc = "data_write (w) register accessor: an alias for `Reg<DATA_WRITE_SPEC>`"]
pub type DATA_WRITE = crate::Reg<data_write::DATA_WRITE_SPEC>;
#[doc = "FIFO write data register"]
pub mod data_write;
#[doc = "data_read (r) register accessor: an alias for `Reg<DATA_READ_SPEC>`"]
pub type DATA_READ = crate::Reg<data_read::DATA_READ_SPEC>;
#[doc = "FIFO read data register"]
pub mod data_read;