#[doc = "Register `config` reader"]
pub struct R(crate::R<CONFIG_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<CONFIG_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<CONFIG_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<CONFIG_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `config` writer"]
pub struct W(crate::W<CONFIG_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<CONFIG_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<CONFIG_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<CONFIG_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `stop_on_repeat` reader - Enable or disable stop on one repeat cycle completed"]
pub type STOP_ON_REPEAT_R = crate::BitReader<bool>;
#[doc = "Field `stop_on_repeat` writer - Enable or disable stop on one repeat cycle completed"]
pub type STOP_ON_REPEAT_W<'a, const O: u8> = crate::BitWriter<'a, u32, CONFIG_SPEC, bool, O>;
#[doc = "Field `adc_trigger_source` reader - Select channel in Analog-to-Digital Converter to interact with this peripheral\n\n **This field only works with PWM0.** PWM1 does not have this feature."]
pub type ADC_TRIGGER_SOURCE_R = crate::FieldReader<u8, u8>;
#[doc = "Field `adc_trigger_source` writer - Select channel in Analog-to-Digital Converter to interact with this peripheral\n\n **This field only works with PWM0.** PWM1 does not have this feature."]
pub type ADC_TRIGGER_SOURCE_W<'a, const O: u8> =
crate::FieldWriter<'a, u32, CONFIG_SPEC, u8, u8, 4, O>;
#[doc = "Field `software_break` reader - Enable software signal break"]
pub type SOFTWARE_BREAK_R = crate::BitReader<bool>;
#[doc = "Field `software_break` writer - Enable software signal break"]
pub type SOFTWARE_BREAK_W<'a, const O: u8> = crate::BitWriter<'a, u32, CONFIG_SPEC, bool, O>;
#[doc = "Field `external_break` reader - Enable external pin signal break"]
pub type EXTERNAL_BREAK_R = crate::BitReader<bool>;
#[doc = "Field `external_break` writer - Enable external pin signal break"]
pub type EXTERNAL_BREAK_W<'a, const O: u8> = crate::BitWriter<'a, u32, CONFIG_SPEC, bool, O>;
#[doc = "Field `external_polarity` reader - Polarity for external pin break function"]
pub type EXTERNAL_POLARITY_R = crate::BitReader<bool>;
#[doc = "Field `external_polarity` writer - Polarity for external pin break function"]
pub type EXTERNAL_POLARITY_W<'a, const O: u8> = crate::BitWriter<'a, u32, CONFIG_SPEC, bool, O>;
#[doc = "Field `stop_function` reader - Enable or disable stop function"]
pub type STOP_FUNCTION_R = crate::BitReader<bool>;
#[doc = "Field `stop_function` writer - Enable or disable stop function"]
pub type STOP_FUNCTION_W<'a, const O: u8> = crate::BitWriter<'a, u32, CONFIG_SPEC, bool, O>;
#[doc = "Field `stop_mode` reader - Mode to stop this peripheral"]
pub type STOP_MODE_R = crate::BitReader<bool>;
#[doc = "Field `stop_mode` writer - Mode to stop this peripheral"]
pub type STOP_MODE_W<'a, const O: u8> = crate::BitWriter<'a, u32, CONFIG_SPEC, bool, O>;
#[doc = "Field `stop_state` reader - Is this peripheral stopped?"]
pub type STOP_STATE_R = crate::BitReader<bool>;
#[doc = "Field `stop_state` writer - Is this peripheral stopped?"]
pub type STOP_STATE_W<'a, const O: u8> = crate::BitWriter<'a, u32, CONFIG_SPEC, bool, O>;
#[doc = "Field `clock_select` reader - Select group clock source"]
pub type CLOCK_SELECT_R = crate::FieldReader<u8, CLOCK_SOURCE_A>;
#[doc = "Select group clock source\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
#[repr(u8)]
pub enum CLOCK_SOURCE_A {
#[doc = "0: External crystal as clock source"]
XTAL = 0,
#[doc = "1: Bus clock as clock source"]
BCLK = 1,
#[doc = "2: 32-kHz clock source"]
F32K = 2,
}
impl From<CLOCK_SOURCE_A> for u8 {
#[inline(always)]
fn from(variant: CLOCK_SOURCE_A) -> Self {
variant as _
}
}
impl CLOCK_SELECT_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> Option<CLOCK_SOURCE_A> {
match self.bits {
0 => Some(CLOCK_SOURCE_A::XTAL),
1 => Some(CLOCK_SOURCE_A::BCLK),
2 => Some(CLOCK_SOURCE_A::F32K),
_ => None,
}
}
#[doc = "Checks if the value of the field is `XTAL`"]
#[inline(always)]
pub fn is_xtal(&self) -> bool {
*self == CLOCK_SOURCE_A::XTAL
}
#[doc = "Checks if the value of the field is `BCLK`"]
#[inline(always)]
pub fn is_bclk(&self) -> bool {
*self == CLOCK_SOURCE_A::BCLK
}
#[doc = "Checks if the value of the field is `F32K`"]
#[inline(always)]
pub fn is_f32k(&self) -> bool {
*self == CLOCK_SOURCE_A::F32K
}
}
#[doc = "Field `clock_select` writer - Select group clock source"]
pub type CLOCK_SELECT_W<'a, const O: u8> =
crate::FieldWriter<'a, u32, CONFIG_SPEC, u8, CLOCK_SOURCE_A, 2, O>;
impl<'a, const O: u8> CLOCK_SELECT_W<'a, O> {
#[doc = "External crystal as clock source"]
#[inline(always)]
pub fn xtal(self) -> &'a mut W {
self.variant(CLOCK_SOURCE_A::XTAL)
}
#[doc = "Bus clock as clock source"]
#[inline(always)]
pub fn bclk(self) -> &'a mut W {
self.variant(CLOCK_SOURCE_A::BCLK)
}
#[doc = "32-kHz clock source"]
#[inline(always)]
pub fn f32k(self) -> &'a mut W {
self.variant(CLOCK_SOURCE_A::F32K)
}
}
impl R {
#[doc = "Bit 19 - Enable or disable stop on one repeat cycle completed"]
#[inline(always)]
pub fn stop_on_repeat(&self) -> STOP_ON_REPEAT_R {
STOP_ON_REPEAT_R::new(((self.bits >> 19) & 1) != 0)
}
#[doc = "Bits 20:23 - Select channel in Analog-to-Digital Converter to interact with this peripheral\n\n **This field only works with PWM0.** PWM1 does not have this feature."]
#[inline(always)]
pub fn adc_trigger_source(&self) -> ADC_TRIGGER_SOURCE_R {
ADC_TRIGGER_SOURCE_R::new(((self.bits >> 20) & 0x0f) as u8)
}
#[doc = "Bit 24 - Enable software signal break"]
#[inline(always)]
pub fn software_break(&self) -> SOFTWARE_BREAK_R {
SOFTWARE_BREAK_R::new(((self.bits >> 24) & 1) != 0)
}
#[doc = "Bit 25 - Enable external pin signal break"]
#[inline(always)]
pub fn external_break(&self) -> EXTERNAL_BREAK_R {
EXTERNAL_BREAK_R::new(((self.bits >> 25) & 1) != 0)
}
#[doc = "Bit 26 - Polarity for external pin break function"]
#[inline(always)]
pub fn external_polarity(&self) -> EXTERNAL_POLARITY_R {
EXTERNAL_POLARITY_R::new(((self.bits >> 26) & 1) != 0)
}
#[doc = "Bit 27 - Enable or disable stop function"]
#[inline(always)]
pub fn stop_function(&self) -> STOP_FUNCTION_R {
STOP_FUNCTION_R::new(((self.bits >> 27) & 1) != 0)
}
#[doc = "Bit 28 - Mode to stop this peripheral"]
#[inline(always)]
pub fn stop_mode(&self) -> STOP_MODE_R {
STOP_MODE_R::new(((self.bits >> 28) & 1) != 0)
}
#[doc = "Bit 29 - Is this peripheral stopped?"]
#[inline(always)]
pub fn stop_state(&self) -> STOP_STATE_R {
STOP_STATE_R::new(((self.bits >> 29) & 1) != 0)
}
#[doc = "Bits 30:31 - Select group clock source"]
#[inline(always)]
pub fn clock_select(&self) -> CLOCK_SELECT_R {
CLOCK_SELECT_R::new(((self.bits >> 30) & 3) as u8)
}
}
impl W {
#[doc = "Bit 19 - Enable or disable stop on one repeat cycle completed"]
#[inline(always)]
#[must_use]
pub fn stop_on_repeat(&mut self) -> STOP_ON_REPEAT_W<19> {
STOP_ON_REPEAT_W::new(self)
}
#[doc = "Bits 20:23 - Select channel in Analog-to-Digital Converter to interact with this peripheral\n\n **This field only works with PWM0.** PWM1 does not have this feature."]
#[inline(always)]
#[must_use]
pub fn adc_trigger_source(&mut self) -> ADC_TRIGGER_SOURCE_W<20> {
ADC_TRIGGER_SOURCE_W::new(self)
}
#[doc = "Bit 24 - Enable software signal break"]
#[inline(always)]
#[must_use]
pub fn software_break(&mut self) -> SOFTWARE_BREAK_W<24> {
SOFTWARE_BREAK_W::new(self)
}
#[doc = "Bit 25 - Enable external pin signal break"]
#[inline(always)]
#[must_use]
pub fn external_break(&mut self) -> EXTERNAL_BREAK_W<25> {
EXTERNAL_BREAK_W::new(self)
}
#[doc = "Bit 26 - Polarity for external pin break function"]
#[inline(always)]
#[must_use]
pub fn external_polarity(&mut self) -> EXTERNAL_POLARITY_W<26> {
EXTERNAL_POLARITY_W::new(self)
}
#[doc = "Bit 27 - Enable or disable stop function"]
#[inline(always)]
#[must_use]
pub fn stop_function(&mut self) -> STOP_FUNCTION_W<27> {
STOP_FUNCTION_W::new(self)
}
#[doc = "Bit 28 - Mode to stop this peripheral"]
#[inline(always)]
#[must_use]
pub fn stop_mode(&mut self) -> STOP_MODE_W<28> {
STOP_MODE_W::new(self)
}
#[doc = "Bit 29 - Is this peripheral stopped?"]
#[inline(always)]
#[must_use]
pub fn stop_state(&mut self) -> STOP_STATE_W<29> {
STOP_STATE_W::new(self)
}
#[doc = "Bits 30:31 - Select group clock source"]
#[inline(always)]
#[must_use]
pub fn clock_select(&mut self) -> CLOCK_SELECT_W<30> {
CLOCK_SELECT_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "Peripheral group configuration\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [config](index.html) module"]
pub struct CONFIG_SPEC;
impl crate::RegisterSpec for CONFIG_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [config::R](R) reader structure"]
impl crate::Readable for CONFIG_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [config::W](W) writer structure"]
impl crate::Writable for CONFIG_SPEC {
type Writer = W;
const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets config to value 0"]
impl crate::Resettable for CONFIG_SPEC {
const RESET_VALUE: Self::Ux = 0;
}