# Changelog
All notable changes will be documented in this file.
This document is written according to the [Keep a Changelog][kac] style.
## 0.15.0
### Changed
The minimum compiler version was increased to `1.36.0`, which stabilized the
`alloc` crate. As such, the `#![feature(alloc)]` flag has been removed from the
library, and usage as `--no-default-features --features alloc` may safely use
allocation on the stable compiler series.
As `alloc` is available on a stable compiler, the `alloc` *crate feature* has
been made a strict dependency of the `std` crate feature.
Use of `--no-default-features` continues to set the crate in `#![no_std]` mode,
with no allocation support. `--no-default-features --features alloc` adds a
dependency on `alloc`, and the allocating types. The `std` feature alone now
*only* adds operating-system interfaces, such as `io::Write`.
`std` depends on `alloc`, so using the `std` feature will pull in allocation.
## 0.14.0
### Added
- `add_assign_reverse` on `BitSlice` and `BitVec`, and `add_reverse` on
`BitBox` and `BitVec`.
These methods perform left-to-right addition, propagating the carry from the
0th bit in the sequence to the nth. On `BitSlice`, `add_assign_reverse`
returns the carry-out bit. On `BitVec`, `add_assign_reverse` and `add_reverse`
push the carry-out to the right end of the vector.
This feature was requested in [Issue #16], by GitHub user [@GeorgeGkas].
## 0.13.0
### Changed
- The `BitPtr<T>` internal representation replaced the elements/tail tuple with
a bit-length counter. Most of the changes as a result of this were purely
internal, but as it affected the `Serde` representation, this was moved to a
new version.
## 0.12.0
### Added
- `BitSlice::at` simulates a write reference to a single bit. It creates an
instance of `slice::BitGuard`, which holds a mutable reference to the
requested bit and a `bool` slot. `BitGuard` implements `Deref` and `DerefMut`
to its local `bool`, and writes its local `bool` value to the specified bit in
`Drop`.
This allows writing the following:
```rust
*slice.at(index) = some_bit();
```
as equivalent to
```rust
slice.set(index, some_bit());
```
Note that binding the value produced by `BitSlice::at` will cause the write to
occur when that binding *goes out of scope*, not in the assigning statement.
```rust
let slot = slice.at(index);
*index = some_bit();
```
In practice, this should not be an issue, since the rules for mutable borrows
mean that the original slice is not observable until the slot value produced
by `.at()` goes out of scope.
- **SEE THE RENAME BELOW.** The `Bits` and `BitsMut` traits provide reference
conversion from many Rust fundamental types to `BitSlice` regions. `Bits` is
analagous to `AsRef`, and `BitsMut` to `AsMut`. These traits are implemented
on the `BitStore` fundamentals, slices of them, and arrays up to 32.
- `BitSlice::get_unchecked` and `BitSlice::set_unchecked` perform read and write
actions without any bounds checking to ensure the index is within the slice
bounds. This allows faster work in tight loops where the index is already
checked against the slice length. These methods are, of course, incredibly
unsafe, as they are raw memory access with no safeguards to ensure the read or
write is within bounds.
### Changed
- `BitVec::retain` changed its function argument from `(bool) -> bool` to
`(usize, bool) -> bool`, and passes the index as well as the value.
- `Display` implementations of the `BitIdx` and `BitPos` types now just defer to
the interior number, and do not write their own type.
- `BitSlice::as_ptr` and `::as_mut_ptr` now return the null pointer if they are
the empty slice, rather than a dangling pointer.
- The trait formerly known as `Bits` in all previous versions is now `BitStore`,
and the module `bits` is renamed to `store`. Only the `Bits` → `BitStore`
rename affects public API.
- Rewrote the README to better describe all the recent work.
- The documentation examples use the new `as_bitslice` methods instead of the
much less pleasant `Into` conversions to create `BitSlice` handles. This also
serves to demonstrate the new favored method to access regions as bit slices.
## 0.11.3
[Issue #15]: Incorrect validity check in `BitIdx::span`; excluded tail indices
which were used in `BitVec::push`, inducing false `panic!` events. Thanks to
GitHub user [@schomatis] for the report.
## 0.11.2
### Added
- `BitBox` and `BitVec` implement [`Sync`], as discussion with [@ratorx] and
more careful reading of the documentation for `Sync` has persuaded me that
this is sound.
## 0.11.1
[Issue #12]: I left in an `eprintln!` statement from debugging
`BitSlice::set_all`. Thanks to GitHub user [@koushiro] for the report.
## 0.11.0
This contains the last (planned) compiler version upgrade, to `1.34.0`, and the
last major feature add before `1.0`: Serde-powered de/serialization.
Deserialization is not possible without access to an allocator, so it is behind
a feature gate, `serde`, which depends on the `alloc` feature.
`BitSlice`, `BitBox`, and `BitVec` all support serialization, and `BitBox` and
`BitVec` support deserialization
### Added
- `serde` feature to serialize `BitSlice`, `BitBox`, and `BitVec`, and
deserialize `BitBox` and `BitVec`.
- `change_cursor<D>` method on `BitSlice`, `BitBox`, and `BitVec`, which enable
changing the element traversal order on a data set without modifying that
data. This is useful for working with slices that have their cursor type
erased, such as crossing serialization or foreign-language boundaries.
- The internal `atomic` module and `Atomic` trait permit atomic access to
elements for the `Bits` trait to use when performing bit set operations. This
is not exposed to the public API.
- Internal domain models for the memory regions governed by `BitPtr`. These
models provide improved logical support for manipulating bit sequences with as
little inefficiency as possible.
- `BitPtr::bare_parts` and `BitPtr::region_data` internal APIs for accessing
components of the pointer structure.
- Clippy is now part of the development routine.
- `bitbox!` macro wraps `bitvec!` to freeze the produced vector.
### Changed
- The internal `Bits` trait uses a `const fn` stabilized in `1.33.0` in order to
compute type information, rather than requiring explicit statements in the
implementations. It now uses synchronized access to elements for write
operations, to prevent race conditions between adjacent bit slices that
overlap in an element.
- The internal `BitPtr` representation had its bit pattern rules modified. There
is now only one empty-slice region representation, and the pointer is able to
index one more element than it previously could. In addition, `BitPtr::tail()`
produces `0` when empty, rather than `T::BITS`, allowing for more correct
values in `serde` de/serialization.
### Removed
- `BitPtr::set_head` and `BitPtr::set_tail`: in practice, `::new` and
`::new_unchecked` were used at all potential use sites for these functions, as
they are more powerful and better validated.
- `BitPtr::head_elt`, `BitPtr::body_elts`, and `BitPtr::tail_elt` were
superseded by the `domain` module. Their public use is better served by
the `AsRef` trait.
- `BitPtr::is_full`: removed for being never used in the library, and not an
interesting query.
### Issues Resolved
- [Issue #9] revealed a severe logic error in the construction of bit masks in
`Bits::set_at`. Thanks to GitHub user [@torce] for the bug report!
- [Issue #10] revealed a logic error in the construction of bit vectors from bit
slices which did not begin at the front of an element.
`BitVec::from_bitslice` cloned the entire underlying `&[T]` of the source
`BitSlice`, which is incorrect, as `BitVec` currently cannot support offset
head cursors. The correct behavior is to use `<BitVec as FromIterator<bool>>`
to collect the source slice into a fresh `BitVec`.
It may be possible in the future to permit offset head cursors in `BitBox` and
`BitVec`.
Thanks to GitHub user [@overminder] for the bug report!
- `BitSlice::set_all` had a bug where fully spanned elements were zeroed, rather
than filled with the requested bit. This was only detected when the
subtraction example in the `README` code sample broke. Resolution: add a
function to the `Bits` trait which fills an element with a bit, producing all
zero or all one.
## 0.10.2
Bugfix for [Issue #8]. This provides explicit implementations of the threading
traits `Send` and `Sync`. These traits were formerly automatically implemented;
the implementation change in `0.10.0` appears to have removed the automatic
impls.
`BitSlice` is both `Send` and `Sync`, as it is unowned memory. `BitBox` and
`BitVec` are `Send` but not `Sync`, as they are owned memory.
Thanks to GitHub user [@ratorx] for the report!
## 0.10.1
Bugfix for [Issue #7]. `BitSlice::count_ones` and `BitSlice::count_zeros`
counted the total number of bits present in a slice, not the number of bits set
or unset, when operating inside a single element.
The small case used `.map().count()`, but the large case correctly used
`.map().filter().count()`. The missing `.filter()` call, to remove unset or set
bits from the counting, was the cause of the bug.
Thanks to GitHub user [@geq1t] for the report!
## 0.10.0
This version was a complete rewrite of the entire crate. The minimum compiler
version has been upgraded to `1.31.0`. The crate is written against the Rust
2018 edition of the language. It will be a `1.0` release after polishing.
### Added
- `BitPtr` custom pointer representation. This is the most important component
of the rewrite, and what enabled the expanded feature set and API surface.
This structure allows `BitSlice` and `BitVec` to have head cursors at any bit,
not just at the front edge of an element. This allows the crate to support
arbitrary range slicing and slice splitting, and in turn greatly expand the
usability of the slice and vector types.
The `BitPtr` type is wholly crate-internal, and renders the `&BitSlice` and
`BitVec` handle types ***wholly incompatible*** with standard Rust slice and
vector handles. With great power comes great responsibility to never, ever,
interchange these types through any means except the provided translation API.
- Range indexing and more powerful iteration. Bit-precision addressing allows
arbitrary subslices and enables more of the slice API from `core`.
### Changed
- Almost everything has been rewritten. The git diff for this version is
horrifying.
- Formatting traits better leverage the builtin printing structures available
from `core::fmt`, and are made available on `no_std`.
### Removed
- `u64` is only usable as the storage type on 64-bit systems; it has 32-bit
alignment on 32-bit systems and as such is unusable there.
## 0.9.0
### Changed
- The trait `Endian` has been renamed to `Cursor`, and all type variables
`E: Endian` have been renamed to `C: Cursor`.
- The `Bits` trait is no longer bound by `Default`.
## 0.8.0
### Added
- `std` and `alloc` features, which can be disabled for use in `#![no_std]`
libraries. This was implemented by Robert Habermeier, `rphmeier@gmail.com`.
Note that the `BitSlice` tests and all the examples are disabled when the
`alloc` feature is not present. They will function normally when `alloc` is
present but `std` is not.
### Changed
- Compute `Bits::WIDTH` as `size_of::<Self>() * 8` instead of `1 << Bits::INDX`.
## 0.7.0
### Added
- `examples/readme.rs` tracks the contents of the example code in `README.md`.
It will continue to do so until the `external_doc` feature stabilizes so that
the contents of the README can be included in the module documentation of
`src/lib.rs`.
- Officially use the Rust community code of conduct.
- README sections describe why a user might want this library, and what makes it
different than `bit-vec`.
### Changed
- Update minimum Rust version to `1.30.0`.
Internally, this permits use of `std` rather than `::std`. This compiler
edition does not change *intra-crate* macro usage. Clients at `1.30.0` and
above no longer need `#[macro_use]` above `extern crate bitvec;`, and are able
to import the `bitvec!` macro directly with `use bitvec::bitvec;` or
`use bitvec::prelude::*`.
Implementation note: References to literals stabilized at *some* point between
`1.20.0` and `1.30.0`, so the static bool items used for indexing are no
longer needed.
- Include numeric arithmetic as well as set arithmetic in the README.
## 0.6.0
### Changed
- Update minimum Rust version to `1.25.0` in order to use nested imports.
- Fix logic in `Endian::prev`, and re-enabled edge tests.
- Pluralize `BitSlice::count_one()` and `BitSlice::count_zero()` function names.
- Fix documentation and comments.
- Consolidate implementation of `bitvec!` to not use any other macros.
## 0.5.0
### Added
- `BitVec` and `BitSlice` implement `Hash`.
- `BitVec` fully implements addition, negation, and subtraction.
- `BitSlice` implements in-place addition and negation.
- `impl AddAssign for BitSlice`
- `impl Neg for &mut BitSlice`
This distinction is required in order to match the expectations of the
arithmetic traits and the realities of immovable `BitSlice`.
- `BitSlice` offers `.all()`, `.any()`, `.not_all()`, `.not_any()`, and
`.some()` methods to perform n-ary Boolean logic.
- `.all()` tests if all bits are set high
- `.any()` tests if any bits are set high (includes `.all()`)
- `.not_all()` tests if any bits are set low (includes `.not_all()`)
- `.not_any()` tests if all bits are set low
- `.some()` tests if any bits are high and any are low (excludes `.all()` and
`.not_all()`)
- `BitSlice` can count how many bits are set high or low with `.count_one()` and
`.count_zero()`.
## 0.4.0
### Added
`BitSlice::for_each` provides mutable iteration over a slice. It yields each
successive `(index: usize, bit: bool)` pair to a closure, and stores the return
value of that closure at the yielded index.
`BitVec` now implements `Eq` and `Ord` against other `BitVec`s. It is impossible
at this time to make `BitVec` generic over anything that is `Borrow<BitSlice>`,
which would allow comparisons over different ownership types. The declaration
```rust
impl<A, B, C, D, E> PartialEq<C> for BitVec<A, B>
where A: Endian,
B: Bits,
C: Borrow<BitSlice<D, E>>,
D: Endian,
E: Bits,
{
fn eq(&self, rhs: E) { … }
}
```
is impossible to write, so `BitVec == BitSlice` will be rejected.
As with many other traits on `BitVec`, the implementations are just a thin
wrapper over the corresponding `BitSlice` implementations.
### Changed
Refine the API documentation. Rust guidelines recommend imperative rather than
descriptive summaries for function documentation, which largely meant stripping
the trailing -s from the first verb in each function document.
I also moved the example code from the trait-level documentation to the
function-level documentation, so that it would show up an `type::func` in the
`rustdoc` output rather than just `type`. This makes it much clearer what is
being tested.
### Removed
`BitVec` methods `iter` and `raw_len` moved to `BitSlice` in `0.3.0` but were
not removed in that release.
The remaining debugging `eprintln!` calls have been stripped.
## 0.3.0
Split `BitVec` off into `BitSlice` wherever possible.
### Added
- The `BitSlice` type is the `[T]` to `BitVec`'s `Vec<T>`. `BitVec` now `Deref`s
to it, and has offloaded all the work that does not require managing allocated
memory.
- Almost all of the public API on both types has documentation and example code.
### Changed
- The implementations of left- ard right- shift are now faster.
- `BitVec` can `Borrow` and `Deref` down to `BitSlice`, and offloads as much
work as possible to it.
- `Clone` is more intelligent.
## 0.2.0
Improved the `bitvec!` macro.
### Changed
- `bitvec!` takes more syntaxes to better match `vec!`, and has better
runtime performance. The increased static memory used by `bitvec!` should be
more than counterbalanced by the vastly better generated code.
## 0.1.0
Initial implementation and release.
### Added
- `Endian` and `Bits` traits
- `BitVec` type with basic `Vec` idioms and parallel trait implementations
- `bitvec!` generator macro
[@GeorgeGkas]: https://github.com/GeorgeGkas
[@geq1t]: https://github.com/geq1t
[@koushiro]: https://github.com/koushiro
[@overminder]: https://github.com/overminder
[@ratorx]: https://github.com/ratorx
[@schomatis]: https://github.com/schomatis
[@torce]: https://github.com/torce
[Issue #7]: https://github.com/myrrlyn/bitvec/issues/7
[Issue #8]: https://github.com/myrrlyn/bitvec/issues/8
[Issue #9]: https://github.com/myrrlyn/bitvec/issues/9
[Issue #10]: https://github.com/myrrlyn/bitvec/issues/10
[Issue #12]: https://github.com/myrrlyn/bitvec/issues/12
[Issue #15]: https://github.com/myrrlyn/bitvec/issues/15
[Issue #16]: https://github.com/myrrlyn/bitvec/issues/16
[`Sync`]: https://doc.rust-lang.org/stable/core/marker/trait.Sync.html
[kac]: https://keepachangelog.com/en/1.0.0/