basis 0.15.1

//! One workspace open's A2A configuration, kept so it can be read again.
//!
//! The open reads the three sources once and connects what they name; a
//! reload (ADR-0031 §1) reads the same three sources the same way — the same
//! [`discovered`] the open calls, so the rules cannot drift apart — and hands
//! the result to the live set. What the run header reports about A2A, the
//! files in effect and the names configured, is read from here at the moment
//! it is reported, so it follows the set rather than the open.
//!
//! Every read is stamped first — each source path's existence, length and
//! modification time ([`super::watch`]) — so a watch can tell whether
//! anything changed since the last read without reading anything itself.

use std::{
    path::{Path, PathBuf},
    sync::{Arc, Mutex, RwLock},
    time::Duration,
};

use super::{
    A2aAgent, A2aConfig, A2aError, A2aReload, DEFAULT_GLOBAL_A2A_FILE,
    remote::{OnChange, RemoteAgents},
    watch::{self, A2aWatch, A2aWatchError, Stamp},
};
use crate::{event::ContextFile, runtime::Runtime};

/// What a workspace open knows about its remote agents: where it looked, what
/// it found there, and the live set it connected.
pub(crate) struct LiveA2a {
    root: PathBuf,
    config: A2aConfig,
    /// The files that can configure an agent, whether or not they exist —
    /// what a watch polls. Host-supplied agents have no file.
    paths: Vec<PathBuf>,
    /// What [`paths`](Self::paths) looked like just before the last read,
    /// successful or not.
    seen: Mutex<Vec<Stamp>>,
    /// The files that took effect on the last successful read.
    files: RwLock<Vec<ContextFile>>,
    remote: Arc<RemoteAgents>,
    /// Held across a whole reload — reading, connecting, applying — so two
    /// reloads, a host's and the watch's say, apply one after the other
    /// rather than each diffing against a set the other is about to replace.
    reloading: tokio::sync::Mutex<()>,
}

impl LiveA2a {
    /// Connects what [`discovered`] found on `runtime`, and keeps what it
    /// took to find it.
    pub(crate) async fn connect(
        root: PathBuf,
        config: A2aConfig,
        discovery: Discovery,
        runtime: &Arc<Runtime>,
    ) -> Self {
        let remembered_in = runtime.a2a_conversations_dir().map(Path::to_path_buf);
        let remote = RemoteAgents::connect(discovery.agents, remembered_in)
            .await
            .with_on_change(refresher(runtime))
            .with_hop(runtime.a2a_hop());
        Self {
            paths: sources(&root, &config),
            seen: Mutex::new(discovery.seen),
            root,
            config,
            files: RwLock::new(discovery.files),
            remote: Arc::new(remote),
            reloading: tokio::sync::Mutex::new(()),
        }
    }

    /// The live set, as every agent minted or resumed from this open holds it.
    pub(crate) fn remote(&self) -> &Arc<RemoteAgents> {
        &self.remote
    }

    /// Every configured name, in configuration order.
    pub(crate) fn names(&self) -> Vec<String> {
        self.remote.names()
    }

    /// The files in effect, most specific first.
    pub(crate) fn files(&self) -> Vec<ContextFile> {
        self.files
            .read()
            .unwrap_or_else(|poisoned| poisoned.into_inner())
            .clone()
    }

    /// Reads the sources again and applies the difference.
    ///
    /// A source that fails to read or validate is returned as the error before
    /// anything is applied, so the set — and the files reported — stay exactly
    /// as they were: a half-typed file never drops an agent (ADR-0031 §1).
    pub(crate) async fn reload(&self) -> Result<A2aReload, A2aError> {
        let _serial = self.reloading.lock().await;
        let discovery = match discovered(&self.root, &self.config) {
            Ok(discovery) => discovery,
            // Recorded at once for a read that failed: there is nothing to
            // apply, and a watch should try a broken file again when it
            // changes, not on every poll.
            Err((seen, error)) => {
                self.saw(seen);
                return Err(error);
            }
        };

        let report = self.remote.reload(discovery.agents).await;
        *self
            .files
            .write()
            .unwrap_or_else(|poisoned| poisoned.into_inner()) = discovery.files;
        // Recorded only once the set is swapped: a reload cancelled while it
        // connected — a host's timeout, a watch dropped mid-reload — applied
        // nothing, so the edit it read must still look unseen to the next
        // poll rather than be skipped for good.
        self.saw(discovery.seen);
        Ok(report)
    }

    fn saw(&self, seen: Vec<Stamp>) {
        *self
            .seen
            .lock()
            .unwrap_or_else(|poisoned| poisoned.into_inner()) = seen;
    }

    /// What the sources looked like just before the last read.
    pub(crate) fn seen(&self) -> Vec<Stamp> {
        self.seen
            .lock()
            .unwrap_or_else(|poisoned| poisoned.into_inner())
            .clone()
    }

    /// Starts polling this open's A2A files every `interval`, reloading on a
    /// change. See [`Workspace::watch_a2a`](crate::Workspace::watch_a2a).
    pub(crate) fn watch(self: &Arc<Self>, interval: Duration) -> Result<A2aWatch, A2aWatchError> {
        watch::start(Arc::downgrade(self), self.paths.clone(), interval)
    }
}

/// What one read of the sources found, and what they looked like just before.
pub(crate) struct Discovery {
    files: Vec<ContextFile>,
    agents: Vec<A2aAgent>,
    seen: Vec<Stamp>,
}

/// The files that can configure an agent for `workspace`, existing or not, in
/// [`super::discover`]'s order.
fn sources(workspace: &Path, config: &A2aConfig) -> Vec<PathBuf> {
    crate::paths::candidate(workspace, &config.workspace_file)
        .into_iter()
        .chain(
            config
                .global_dir
                .as_ref()
                .map(|global| global.join(DEFAULT_GLOBAL_A2A_FILE)),
        )
        .collect()
}

/// Asks mentra to capture every registered tool's description again, so the
/// next model request of every agent holding the set is told the set as it
/// is (ADR-0031 §3).
///
/// Weak, because the set is held by the `spawn` copies mentra's registry owns:
/// a strong runtime here would be a cycle through that registry, and the
/// runtime would never drop — the reason `spawn` reads the agent ledger
/// through its own `Arc` rather than the runtime's.
fn refresher(runtime: &Arc<Runtime>) -> OnChange {
    let runtime = Arc::downgrade(runtime);
    Box::new(move || {
        if let Some(runtime) = runtime.upgrade() {
            runtime.mentra_runtime().refresh_tool_descriptors();
        }
    })
}

/// Discovers the remote agents a workspace can reach, and which files said
/// so — what both the open and every reload read. Stamps the sources first,
/// and hands the stamps back with a failure too.
///
/// Each file is read once: the sources are what the header names, and the
/// same sources are layered under the host's own list into what connects.
pub(crate) fn discovered(
    workspace: &Path,
    config: &A2aConfig,
) -> Result<Discovery, (Vec<Stamp>, A2aError)> {
    let seen = watch::stamps(&sources(workspace, config));
    let read = || -> Result<_, A2aError> {
        let supplied = super::supplied(config)?;
        let sources = super::discover(workspace, config)?;
        let files = sources
            .iter()
            .map(|source| ContextFile {
                path: source.path.clone(),
                scope: source.scope.label(),
            })
            .collect();
        Ok((files, super::layered(supplied, sources)))
    };
    match read() {
        Ok((files, agents)) => Ok(Discovery {
            files,
            agents,
            seen,
        }),
        Err(error) => Err((seen, error)),
    }
}

/// Names and files only, for [`super::A2aAgent`]'s reason: the config holds
/// expanded credentials.
impl std::fmt::Debug for LiveA2a {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        f.debug_struct("LiveA2a")
            .field("files", &self.files())
            .field("agents", &self.remote)
            .finish_non_exhaustive()
    }
}

#[cfg(test)]
mod tests;