bashkit 0.1.14

//! Resource limits for virtual execution.
//!
//! These limits prevent runaway scripts from consuming excessive resources.
//!
//! # Security Mitigations
//!
//! This module mitigates the following threats (see `specs/006-threat-model.md`):
//!
//! - **TM-DOS-001**: Large script input → `max_input_bytes`
//! - **TM-DOS-002, TM-DOS-004, TM-DOS-019**: Command flooding → `max_commands`
//! - **TM-DOS-016, TM-DOS-017**: Infinite loops → `max_loop_iterations`
//! - **TM-DOS-018**: Nested loop multiplication → `max_total_loop_iterations`
//! - **TM-DOS-020, TM-DOS-021**: Function recursion → `max_function_depth`
//! - **TM-DOS-022**: Parser recursion → `max_ast_depth`
//! - **TM-DOS-023**: CPU exhaustion → `timeout`
//! - **TM-DOS-024**: Parser hang → `parser_timeout`, `max_parser_operations`
//! - **TM-DOS-027**: Builtin parser recursion → `MAX_AWK_PARSER_DEPTH`, `MAX_JQ_JSON_DEPTH` (in builtins)
//!
//! # Fail Points (enabled with `failpoints` feature)
//!
//! - `limits::tick_command` - Inject failures in command counting
//! - `limits::tick_loop` - Inject failures in loop iteration counting
//! - `limits::push_function` - Inject failures in function depth tracking

use std::time::Duration;

#[cfg(feature = "failpoints")]
use fail::fail_point;

/// Resource limits for script execution
#[derive(Debug, Clone)]
pub struct ExecutionLimits {
    /// Maximum number of commands that can be executed (fuel model)
    /// Default: 10,000
    pub max_commands: usize,

    /// Maximum iterations for a single loop
    /// Default: 10,000
    pub max_loop_iterations: usize,

    // THREAT[TM-DOS-018]: Nested loops each reset their per-loop counter,
    // allowing 10K^depth total iterations. This global cap prevents that.
    /// Maximum total loop iterations across all loops (nested and sequential).
    /// Prevents nested loop multiplication attack (TM-DOS-018).
    /// Default: 1,000,000
    pub max_total_loop_iterations: usize,

    /// Maximum function call depth (recursion limit)
    /// Default: 100
    pub max_function_depth: usize,

    /// Execution timeout
    /// Default: 30 seconds
    pub timeout: Duration,

    /// Parser timeout (separate from execution timeout)
    /// Default: 5 seconds
    /// This limits how long the parser can spend parsing a script before giving up.
    /// Protects against parser hang attacks (V3 in threat model).
    pub parser_timeout: Duration,

    /// Maximum input script size in bytes
    /// Default: 10MB (10,000,000 bytes)
    /// Protects against memory exhaustion from large scripts (V1 in threat model).
    pub max_input_bytes: usize,

    /// Maximum AST nesting depth during parsing
    /// Default: 100
    /// Protects against stack overflow from deeply nested scripts (V4 in threat model).
    pub max_ast_depth: usize,

    /// Maximum parser operations (fuel model for parsing)
    /// Default: 100,000
    /// Protects against parser DoS attacks that could otherwise cause CPU exhaustion.
    pub max_parser_operations: usize,

    /// Maximum stdout capture size in bytes
    /// Default: 1MB (1,048,576 bytes)
    /// Prevents unbounded output accumulation from runaway commands.
    pub max_stdout_bytes: usize,

    /// Maximum stderr capture size in bytes
    /// Default: 1MB (1,048,576 bytes)
    /// Prevents unbounded error output accumulation.
    pub max_stderr_bytes: usize,

    /// Whether to capture the final environment state in ExecResult.
    /// Default: false (opt-in to avoid cloning cost when not needed)
    pub capture_final_env: bool,
}

impl Default for ExecutionLimits {
    fn default() -> Self {
        Self {
            max_commands: 10_000,
            max_loop_iterations: 10_000,
            max_total_loop_iterations: 1_000_000,
            max_function_depth: 100,
            timeout: Duration::from_secs(30),
            parser_timeout: Duration::from_secs(5),
            max_input_bytes: 10_000_000, // 10MB
            max_ast_depth: 100,
            max_parser_operations: 100_000,
            max_stdout_bytes: 1_048_576, // 1MB
            max_stderr_bytes: 1_048_576, // 1MB
            capture_final_env: false,
        }
    }
}

impl ExecutionLimits {
    /// Create new limits with defaults
    pub fn new() -> Self {
        Self::default()
    }

    /// Set maximum command count
    pub fn max_commands(mut self, count: usize) -> Self {
        self.max_commands = count;
        self
    }

    /// Set maximum loop iterations (per-loop)
    pub fn max_loop_iterations(mut self, count: usize) -> Self {
        self.max_loop_iterations = count;
        self
    }

    /// Set maximum total loop iterations (across all nested/sequential loops).
    /// Prevents TM-DOS-018 nested loop multiplication.
    pub fn max_total_loop_iterations(mut self, count: usize) -> Self {
        self.max_total_loop_iterations = count;
        self
    }

    /// Set maximum function depth
    pub fn max_function_depth(mut self, depth: usize) -> Self {
        self.max_function_depth = depth;
        self
    }

    /// Set execution timeout
    pub fn timeout(mut self, timeout: Duration) -> Self {
        self.timeout = timeout;
        self
    }

    /// Set parser timeout
    pub fn parser_timeout(mut self, timeout: Duration) -> Self {
        self.parser_timeout = timeout;
        self
    }

    /// Set maximum input script size in bytes
    pub fn max_input_bytes(mut self, bytes: usize) -> Self {
        self.max_input_bytes = bytes;
        self
    }

    /// Set maximum AST nesting depth
    pub fn max_ast_depth(mut self, depth: usize) -> Self {
        self.max_ast_depth = depth;
        self
    }

    /// Set maximum parser operations
    pub fn max_parser_operations(mut self, ops: usize) -> Self {
        self.max_parser_operations = ops;
        self
    }

    /// Set maximum stdout capture size in bytes
    pub fn max_stdout_bytes(mut self, bytes: usize) -> Self {
        self.max_stdout_bytes = bytes;
        self
    }

    /// Set maximum stderr capture size in bytes
    pub fn max_stderr_bytes(mut self, bytes: usize) -> Self {
        self.max_stderr_bytes = bytes;
        self
    }

    /// Enable capturing final environment state in ExecResult
    pub fn capture_final_env(mut self, capture: bool) -> Self {
        self.capture_final_env = capture;
        self
    }
}

// THREAT[TM-DOS-059]: Session-level cumulative resource limits.
// Per-exec limits reset every exec() call. Session limits persist across
// all exec() calls within a Bash instance, preventing a tenant from
// circumventing per-execution limits by splitting work across many calls.

/// Default max total commands across all exec() calls: 100,000
pub const DEFAULT_SESSION_MAX_COMMANDS: u64 = 100_000;

/// Default max exec() invocations per session: 1,000
pub const DEFAULT_SESSION_MAX_EXEC_CALLS: u64 = 1_000;

/// Session-level resource limits that persist across `exec()` calls.
///
/// These limits prevent tenants from circumventing per-execution limits
/// by splitting work across many small `exec()` calls.
#[derive(Debug, Clone)]
pub struct SessionLimits {
    /// Maximum total commands across all exec() calls.
    /// Default: 100,000
    pub max_total_commands: u64,

    /// Maximum number of exec() invocations per session.
    /// Default: 1,000
    pub max_exec_calls: u64,
}

impl Default for SessionLimits {
    fn default() -> Self {
        Self {
            max_total_commands: DEFAULT_SESSION_MAX_COMMANDS,
            max_exec_calls: DEFAULT_SESSION_MAX_EXEC_CALLS,
        }
    }
}

impl SessionLimits {
    /// Create new session limits with defaults.
    pub fn new() -> Self {
        Self::default()
    }

    /// Set maximum total commands across all exec() calls.
    pub fn max_total_commands(mut self, count: u64) -> Self {
        self.max_total_commands = count;
        self
    }

    /// Set maximum number of exec() invocations.
    pub fn max_exec_calls(mut self, count: u64) -> Self {
        self.max_exec_calls = count;
        self
    }

    /// Create unlimited session limits (no restrictions).
    pub fn unlimited() -> Self {
        Self {
            max_total_commands: u64::MAX,
            max_exec_calls: u64::MAX,
        }
    }
}

/// Execution counters for tracking resource usage
#[derive(Debug, Clone, Default)]
pub struct ExecutionCounters {
    /// Number of commands executed
    pub commands: usize,

    /// Current function call depth
    pub function_depth: usize,

    /// Number of iterations in current loop (reset per-loop)
    pub loop_iterations: usize,

    // THREAT[TM-DOS-018]: Nested loop multiplication
    // This counter never resets, tracking total iterations across all loops.
    /// Total loop iterations across all loops (never reset)
    pub total_loop_iterations: usize,

    // THREAT[TM-DOS-059]: Session-level cumulative counters.
    // These persist across exec() calls (never reset by reset_for_execution).
    /// Total commands across all exec() calls in this session.
    pub session_commands: u64,

    /// Number of exec() invocations in this session.
    pub session_exec_calls: u64,
}

impl ExecutionCounters {
    /// Create new counters
    pub fn new() -> Self {
        Self::default()
    }

    /// Reset counters for a new exec() invocation.
    /// Each exec() is a separate script and gets its own budget.
    /// This prevents a prior exec() from permanently poisoning the session.
    pub fn reset_for_execution(&mut self) {
        self.commands = 0;
        self.loop_iterations = 0;
        self.total_loop_iterations = 0;
        // function_depth should already be 0 between exec() calls,
        // but reset defensively to avoid stuck state
        self.function_depth = 0;
    }

    /// Increment command counter, returns error if limit exceeded
    pub fn tick_command(&mut self, limits: &ExecutionLimits) -> Result<(), LimitExceeded> {
        // Fail point: test behavior when counter increment is corrupted
        #[cfg(feature = "failpoints")]
        fail_point!("limits::tick_command", |action| {
            match action.as_deref() {
                Some("skip_increment") => {
                    // Simulate counter not incrementing (potential bypass)
                    return Ok(());
                }
                Some("force_overflow") => {
                    // Simulate counter overflow
                    self.commands = usize::MAX;
                    return Err(LimitExceeded::MaxCommands(limits.max_commands));
                }
                Some("corrupt_high") => {
                    // Simulate counter corruption to a high value
                    self.commands = limits.max_commands + 1;
                }
                _ => {}
            }
            Ok(())
        });

        self.commands += 1;
        self.session_commands += 1;
        if self.commands > limits.max_commands {
            return Err(LimitExceeded::MaxCommands(limits.max_commands));
        }
        Ok(())
    }

    /// Check session-level limits. Called at exec() entry and during execution.
    pub fn check_session_limits(
        &self,
        session_limits: &SessionLimits,
    ) -> Result<(), LimitExceeded> {
        if self.session_exec_calls > session_limits.max_exec_calls {
            return Err(LimitExceeded::SessionMaxExecCalls(
                session_limits.max_exec_calls,
            ));
        }
        if self.session_commands > session_limits.max_total_commands {
            return Err(LimitExceeded::SessionMaxCommands(
                session_limits.max_total_commands,
            ));
        }
        Ok(())
    }

    /// Increment exec call counter for session tracking.
    pub fn tick_exec_call(&mut self) {
        self.session_exec_calls += 1;
    }

    /// Increment loop iteration counter, returns error if limit exceeded
    pub fn tick_loop(&mut self, limits: &ExecutionLimits) -> Result<(), LimitExceeded> {
        // Fail point: test behavior when loop counter is corrupted
        #[cfg(feature = "failpoints")]
        fail_point!("limits::tick_loop", |action| {
            match action.as_deref() {
                Some("skip_check") => {
                    // Simulate limit check being bypassed
                    self.loop_iterations += 1;
                    return Ok(());
                }
                Some("reset_counter") => {
                    // Simulate counter being reset (infinite loop potential)
                    self.loop_iterations = 0;
                    return Ok(());
                }
                _ => {}
            }
            Ok(())
        });

        self.loop_iterations += 1;
        self.total_loop_iterations += 1;
        if self.loop_iterations > limits.max_loop_iterations {
            return Err(LimitExceeded::MaxLoopIterations(limits.max_loop_iterations));
        }
        // THREAT[TM-DOS-018]: Check global cap to prevent nested loop multiplication
        if self.total_loop_iterations > limits.max_total_loop_iterations {
            return Err(LimitExceeded::MaxTotalLoopIterations(
                limits.max_total_loop_iterations,
            ));
        }
        Ok(())
    }

    /// Reset loop iteration counter (called when entering a new loop)
    pub fn reset_loop(&mut self) {
        self.loop_iterations = 0;
    }

    /// Push function call, returns error if depth exceeded
    pub fn push_function(&mut self, limits: &ExecutionLimits) -> Result<(), LimitExceeded> {
        // Fail point: test behavior when function depth tracking fails
        #[cfg(feature = "failpoints")]
        fail_point!("limits::push_function", |action| {
            match action.as_deref() {
                Some("skip_check") => {
                    // Simulate depth check being bypassed (stack overflow potential)
                    self.function_depth += 1;
                    return Ok(());
                }
                Some("corrupt_depth") => {
                    // Simulate depth counter corruption
                    self.function_depth = 0;
                    return Ok(());
                }
                _ => {}
            }
            Ok(())
        });

        // Check before incrementing so we don't leave invalid state on failure
        if self.function_depth >= limits.max_function_depth {
            return Err(LimitExceeded::MaxFunctionDepth(limits.max_function_depth));
        }
        self.function_depth += 1;
        Ok(())
    }

    /// Pop function call
    pub fn pop_function(&mut self) {
        if self.function_depth > 0 {
            self.function_depth -= 1;
        }
    }
}

/// Error returned when a resource limit is exceeded
#[derive(Debug, Clone, thiserror::Error)]
pub enum LimitExceeded {
    #[error("maximum command count exceeded ({0})")]
    MaxCommands(usize),

    #[error("maximum loop iterations exceeded ({0})")]
    MaxLoopIterations(usize),

    #[error("maximum total loop iterations exceeded ({0})")]
    MaxTotalLoopIterations(usize),

    #[error("maximum function depth exceeded ({0})")]
    MaxFunctionDepth(usize),

    #[error("execution timeout ({0:?})")]
    Timeout(Duration),

    #[error("parser timeout ({0:?})")]
    ParserTimeout(Duration),

    #[error("input too large ({0} bytes, max {1} bytes)")]
    InputTooLarge(usize, usize),

    #[error("AST nesting too deep ({0} levels, max {1})")]
    AstTooDeep(usize, usize),

    #[error("parser fuel exhausted ({0} operations, max {1})")]
    ParserExhausted(usize, usize),

    #[error("session command limit exceeded ({0} total commands)")]
    SessionMaxCommands(u64),

    #[error("session exec() call limit exceeded ({0} calls)")]
    SessionMaxExecCalls(u64),

    #[error("memory limit exceeded: {0}")]
    Memory(String),
}

// THREAT[TM-DOS-060]: Per-instance memory budget.
// Without limits, a script can create unbounded variables, arrays, and
// functions, consuming arbitrary heap memory and OOMing a multi-tenant process.

/// Default max variable count (scalar variables).
pub const DEFAULT_MAX_VARIABLE_COUNT: usize = 10_000;
/// Default max total variable bytes (keys + values).
pub const DEFAULT_MAX_TOTAL_VARIABLE_BYTES: usize = 10_000_000; // 10MB
/// Default max array entries (total across all indexed + associative arrays).
pub const DEFAULT_MAX_ARRAY_ENTRIES: usize = 100_000;
/// Default max function definitions.
pub const DEFAULT_MAX_FUNCTION_COUNT: usize = 1_000;
/// Default max total function body bytes (source text).
pub const DEFAULT_MAX_FUNCTION_BODY_BYTES: usize = 1_000_000; // 1MB

/// Memory limits for a Bash instance.
///
/// Controls the maximum amount of interpreter-level memory
/// (variables, arrays, functions) a single instance can consume.
#[derive(Debug, Clone)]
pub struct MemoryLimits {
    /// Maximum number of scalar variables.
    pub max_variable_count: usize,
    /// Maximum total bytes across all variable keys + values.
    pub max_total_variable_bytes: usize,
    /// Maximum total entries across all indexed and associative arrays.
    pub max_array_entries: usize,
    /// Maximum number of function definitions.
    pub max_function_count: usize,
    /// Maximum total bytes of function body source text.
    pub max_function_body_bytes: usize,
}

impl Default for MemoryLimits {
    fn default() -> Self {
        Self {
            max_variable_count: DEFAULT_MAX_VARIABLE_COUNT,
            max_total_variable_bytes: DEFAULT_MAX_TOTAL_VARIABLE_BYTES,
            max_array_entries: DEFAULT_MAX_ARRAY_ENTRIES,
            max_function_count: DEFAULT_MAX_FUNCTION_COUNT,
            max_function_body_bytes: DEFAULT_MAX_FUNCTION_BODY_BYTES,
        }
    }
}

impl MemoryLimits {
    /// Create new memory limits with defaults.
    pub fn new() -> Self {
        Self::default()
    }

    /// Set maximum variable count.
    pub fn max_variable_count(mut self, count: usize) -> Self {
        self.max_variable_count = count;
        self
    }

    /// Set maximum total variable bytes.
    pub fn max_total_variable_bytes(mut self, bytes: usize) -> Self {
        self.max_total_variable_bytes = bytes;
        self
    }

    /// Set maximum array entries.
    pub fn max_array_entries(mut self, count: usize) -> Self {
        self.max_array_entries = count;
        self
    }

    /// Set maximum function count.
    pub fn max_function_count(mut self, count: usize) -> Self {
        self.max_function_count = count;
        self
    }

    /// Set maximum function body bytes.
    pub fn max_function_body_bytes(mut self, bytes: usize) -> Self {
        self.max_function_body_bytes = bytes;
        self
    }

    /// Create unlimited memory limits.
    pub fn unlimited() -> Self {
        Self {
            max_variable_count: usize::MAX,
            max_total_variable_bytes: usize::MAX,
            max_array_entries: usize::MAX,
            max_function_count: usize::MAX,
            max_function_body_bytes: usize::MAX,
        }
    }
}

/// Tracks approximate memory usage for budget enforcement.
#[derive(Debug, Clone, Default)]
pub struct MemoryBudget {
    /// Number of scalar variables (excluding internal markers).
    pub variable_count: usize,
    /// Total bytes in variable keys + values.
    pub variable_bytes: usize,
    /// Total entries across all arrays (indexed + associative).
    pub array_entries: usize,
    /// Number of function definitions.
    pub function_count: usize,
    /// Total bytes in function bodies.
    pub function_body_bytes: usize,
}

impl MemoryBudget {
    /// Check if adding a variable would exceed limits.
    pub fn check_variable_insert(
        &self,
        key_len: usize,
        value_len: usize,
        is_new: bool,
        old_key_len: usize,
        old_value_len: usize,
        limits: &MemoryLimits,
    ) -> Result<(), LimitExceeded> {
        if is_new && self.variable_count >= limits.max_variable_count {
            return Err(LimitExceeded::Memory(format!(
                "variable count limit ({}) exceeded",
                limits.max_variable_count
            )));
        }
        let new_bytes =
            (self.variable_bytes + key_len + value_len).saturating_sub(old_key_len + old_value_len);
        if new_bytes > limits.max_total_variable_bytes {
            return Err(LimitExceeded::Memory(format!(
                "variable byte limit ({}) exceeded",
                limits.max_total_variable_bytes
            )));
        }
        Ok(())
    }

    /// Record a variable insert (call after successful insert).
    pub fn record_variable_insert(
        &mut self,
        key_len: usize,
        value_len: usize,
        is_new: bool,
        old_key_len: usize,
        old_value_len: usize,
    ) {
        if is_new {
            self.variable_count += 1;
        }
        self.variable_bytes =
            (self.variable_bytes + key_len + value_len).saturating_sub(old_key_len + old_value_len);
    }

    /// Record a variable removal.
    pub fn record_variable_remove(&mut self, key_len: usize, value_len: usize) {
        self.variable_count = self.variable_count.saturating_sub(1);
        self.variable_bytes = self.variable_bytes.saturating_sub(key_len + value_len);
    }

    /// Check if adding array entries would exceed limits.
    pub fn check_array_entries(
        &self,
        additional: usize,
        limits: &MemoryLimits,
    ) -> Result<(), LimitExceeded> {
        if self.array_entries + additional > limits.max_array_entries {
            return Err(LimitExceeded::Memory(format!(
                "array entry limit ({}) exceeded",
                limits.max_array_entries
            )));
        }
        Ok(())
    }

    /// Record array entry changes.
    pub fn record_array_insert(&mut self, added: usize) {
        self.array_entries += added;
    }

    /// Record array entry removal.
    pub fn record_array_remove(&mut self, removed: usize) {
        self.array_entries = self.array_entries.saturating_sub(removed);
    }

    /// Check if adding a function would exceed limits.
    pub fn check_function_insert(
        &self,
        body_bytes: usize,
        is_new: bool,
        old_body_bytes: usize,
        limits: &MemoryLimits,
    ) -> Result<(), LimitExceeded> {
        if is_new && self.function_count >= limits.max_function_count {
            return Err(LimitExceeded::Memory(format!(
                "function count limit ({}) exceeded",
                limits.max_function_count
            )));
        }
        let new_bytes = self.function_body_bytes + body_bytes - old_body_bytes;
        if new_bytes > limits.max_function_body_bytes {
            return Err(LimitExceeded::Memory(format!(
                "function body byte limit ({}) exceeded",
                limits.max_function_body_bytes
            )));
        }
        Ok(())
    }

    /// Record a function insert.
    pub fn record_function_insert(
        &mut self,
        body_bytes: usize,
        is_new: bool,
        old_body_bytes: usize,
    ) {
        if is_new {
            self.function_count += 1;
        }
        self.function_body_bytes =
            (self.function_body_bytes + body_bytes).saturating_sub(old_body_bytes);
    }

    /// Record a function removal.
    pub fn record_function_remove(&mut self, body_bytes: usize) {
        self.function_count = self.function_count.saturating_sub(1);
        self.function_body_bytes = self.function_body_bytes.saturating_sub(body_bytes);
    }
}

#[cfg(test)]
mod tests {
    use super::*;

    #[test]
    fn test_default_limits() {
        let limits = ExecutionLimits::default();
        assert_eq!(limits.max_commands, 10_000);
        assert_eq!(limits.max_loop_iterations, 10_000);
        assert_eq!(limits.max_total_loop_iterations, 1_000_000);
        assert_eq!(limits.max_function_depth, 100);
        assert_eq!(limits.timeout, Duration::from_secs(30));
        assert_eq!(limits.parser_timeout, Duration::from_secs(5));
        assert_eq!(limits.max_input_bytes, 10_000_000);
        assert_eq!(limits.max_ast_depth, 100);
        assert_eq!(limits.max_parser_operations, 100_000);
        assert_eq!(limits.max_stdout_bytes, 1_048_576);
        assert_eq!(limits.max_stderr_bytes, 1_048_576);
        assert!(!limits.capture_final_env);
    }

    #[test]
    fn test_builder_pattern() {
        let limits = ExecutionLimits::new()
            .max_commands(100)
            .max_loop_iterations(50)
            .max_function_depth(10)
            .timeout(Duration::from_secs(5));

        assert_eq!(limits.max_commands, 100);
        assert_eq!(limits.max_loop_iterations, 50);
        assert_eq!(limits.max_function_depth, 10);
        assert_eq!(limits.timeout, Duration::from_secs(5));
    }

    #[test]
    fn test_command_counter() {
        let limits = ExecutionLimits::new().max_commands(5);
        let mut counters = ExecutionCounters::new();

        for _ in 0..5 {
            assert!(counters.tick_command(&limits).is_ok());
        }

        // 6th command should fail
        assert!(matches!(
            counters.tick_command(&limits),
            Err(LimitExceeded::MaxCommands(5))
        ));
    }

    #[test]
    fn test_loop_counter() {
        let limits = ExecutionLimits::new().max_loop_iterations(3);
        let mut counters = ExecutionCounters::new();

        for _ in 0..3 {
            assert!(counters.tick_loop(&limits).is_ok());
        }

        // 4th iteration should fail
        assert!(matches!(
            counters.tick_loop(&limits),
            Err(LimitExceeded::MaxLoopIterations(3))
        ));

        // Reset and try again
        counters.reset_loop();
        assert!(counters.tick_loop(&limits).is_ok());
    }

    #[test]
    fn test_total_loop_counter_accumulates() {
        let limits = ExecutionLimits::new()
            .max_loop_iterations(5)
            .max_total_loop_iterations(8);
        let mut counters = ExecutionCounters::new();

        // First loop: 5 iterations (per-loop limit)
        for _ in 0..5 {
            assert!(counters.tick_loop(&limits).is_ok());
        }
        assert_eq!(counters.total_loop_iterations, 5);

        // Reset per-loop counter (entering new loop)
        counters.reset_loop();
        assert_eq!(counters.loop_iterations, 0);
        // total_loop_iterations should NOT reset
        assert_eq!(counters.total_loop_iterations, 5);

        // Second loop: should fail after 3 more (total = 8 cap)
        assert!(counters.tick_loop(&limits).is_ok()); // total=6
        assert!(counters.tick_loop(&limits).is_ok()); // total=7
        assert!(counters.tick_loop(&limits).is_ok()); // total=8

        // 9th total iteration should fail
        assert!(matches!(
            counters.tick_loop(&limits),
            Err(LimitExceeded::MaxTotalLoopIterations(8))
        ));
    }

    #[test]
    fn test_function_depth() {
        let limits = ExecutionLimits::new().max_function_depth(2);
        let mut counters = ExecutionCounters::new();

        assert!(counters.push_function(&limits).is_ok());
        assert!(counters.push_function(&limits).is_ok());

        // 3rd call should fail
        assert!(matches!(
            counters.push_function(&limits),
            Err(LimitExceeded::MaxFunctionDepth(2))
        ));

        // Pop and try again
        counters.pop_function();
        assert!(counters.push_function(&limits).is_ok());
    }

    #[test]
    fn test_reset_for_execution() {
        let limits = ExecutionLimits::new().max_commands(5);
        let mut counters = ExecutionCounters::new();

        // Exhaust command budget
        for _ in 0..5 {
            counters.tick_command(&limits).unwrap();
        }
        assert!(counters.tick_command(&limits).is_err());

        // Also accumulate some loop/function state
        counters.loop_iterations = 42;
        counters.total_loop_iterations = 999;
        counters.function_depth = 3;

        // Reset should restore all counters
        counters.reset_for_execution();
        assert_eq!(counters.commands, 0);
        assert_eq!(counters.loop_iterations, 0);
        assert_eq!(counters.total_loop_iterations, 0);
        assert_eq!(counters.function_depth, 0);

        // Should be able to tick commands again
        assert!(counters.tick_command(&limits).is_ok());
    }
}