bacnet-bip-core

Portable BACnet/IP behaviour from Annex J of ASHRAE 135, for rusty-bacnet. It sits above bacnet-bip-codec, which has the wire format, and below a socket.

• #![no_std], no allocator, no dependencies besides bacnet-bip-codec and bacnet-time. The codec is re-exported as bacnet_bip_core::codec, since the API speaks its types.
• Tables live in arrays whose size you pick with a const generic.
• Time is an Instant you pass to each call; the crate reads no clock. It is bacnet-time's, in nanoseconds, re-exported here, the same type bacnet-mstp-core and bacnet-router-core take, so firmware feeds them one clock. A now earlier than the latest one passed in is taken as that latest one: time never runs backwards, so a clock that steps back holds the timers still instead of failing.
• The types that may grow are #[non_exhaustive]: build a Datagram, a bbmd::Context, a LocalSubnet or a bbmd::Registration with new; start a Link or a Foreign from new, or the RegistrationLimits from DEFAULT, and set the fields to change; and give a match on an error, a refusal, a Discard or another of these enums a wildcard arm.

What it has

The node module is a sans-IO B/IP node in normal, foreign-device and BBMD mode:

• Link, its fixed configuration, decides what to do with each received datagram (the receive rules, own echoes, the NAKs a node that is not a BBMD owes, a Forwarded-NPDU's origin) and what to send for an NPDU, within a datagram budget. Its decisions are pure.
• Node keeps the rest: its own management exchanges, matched by peer and operation; a foreign device's registration, with backoff after a loss and a lease that never counts on the BBMD's grace period; broadcasts held until the first registration resolves; and the timers. You poll its actions after every call.

The bbmd module holds a BBMD's broadcast distribution table and foreign device table, and decides where each broadcast goes:

• an Original-Broadcast-NPDU from the local subnet, to the peer subnets (one-hop or two-hop, from each BDT row's mask) and the foreign devices;
• a peer BBMD's Forwarded-NPDU, to the foreign devices and, when it came to this BBMD alone (its own BDT row is two-hop and it arrived by unicast), the local subnet;
• a registered foreign device's Distribute-Broadcast-To-Network;
• the BBMD's own broadcasts.

Each decision writes its destinations into storage you pass and returns the Forwarded-NPDU to send them. Foreign-device registration applies time-to-live limits, a per-address quota and reserved capacity, and asks your own admission check (an access list, a rate limit) in between. Registrations expire on your clock, with the 30-second grace period.

The Tokio B/IP transport in bacnet-transport runs its node and its BBMD on this crate.

Example

use core::net::{Ipv4Addr, SocketAddrV4};
use bacnet_bip_core::bbmd::{Context, Tables, Target};
use bacnet_bip_core::codec::{BdtEntries, BdtEntry};
use bacnet_bip_core::Instant;

let own = SocketAddrV4::new(Ipv4Addr::new(10, 0, 1, 1), 47808);
let peer = SocketAddrV4::new(Ipv4Addr::new(10, 0, 2, 1), 47808);
let mut tables: Tables<8, 16> = Tables::new(own);
tables
    .bdt
    .set(BdtEntries::from_entries(&[BdtEntry::new(peer, Ipv4Addr::BROADCAST)]))
    .unwrap();

let cx = Context::new(Instant::from_millis(1_000), 16);
let source = SocketAddrV4::new(Ipv4Addr::new(10, 0, 1, 20), 47808);
let mut out = [Target::UNUSED; Tables::<8, 16>::MAX_TARGETS];
let sent = tables.original_broadcast(&cx, source, &[0x01, 0x00], &mut out);
for (destination, message) in sent.transmissions() {
    // Encode `message` (a Forwarded-NPDU) and send it to `destination`.
    let _ = (destination, message);
}

License

MIT