aya-ebpf 0.2.1

use core::{ffi::c_void, mem::MaybeUninit, ptr};

use aya_ebpf_bindings::helpers::{
    bpf_clone_redirect, bpf_get_socket_uid, bpf_l3_csum_replace, bpf_l4_csum_replace,
    bpf_skb_adjust_room, bpf_skb_change_proto, bpf_skb_change_type, bpf_skb_load_bytes,
    bpf_skb_pull_data, bpf_skb_store_bytes,
};
use aya_ebpf_cty::c_long;

use crate::{EbpfContext, bindings::__sk_buff};

pub struct SkBuff {
    pub skb: *mut __sk_buff,
}

impl SkBuff {
    pub const fn new(skb: *mut __sk_buff) -> Self {
        Self { skb }
    }

    #[inline]
    pub fn len(&self) -> u32 {
        unsafe { (*self.skb).len }
    }

    #[inline]
    pub(crate) fn data(&self) -> usize {
        unsafe { (*self.skb).data as usize }
    }

    #[inline]
    pub(crate) fn data_end(&self) -> usize {
        unsafe { (*self.skb).data_end as usize }
    }

    #[inline]
    pub fn set_mark(&self, mark: u32) {
        unsafe { (*self.skb).mark = mark }
    }

    #[inline]
    pub fn cb(&self) -> &[u32] {
        unsafe { &(*self.skb).cb }
    }

    /// Returns a mutable slice to the control buffer (cb).
    #[inline]
    pub fn cb_mut(&mut self) -> &mut [u32] {
        unsafe { &mut (*self.skb).cb }
    }

    /// Returns the owner UID of the socket associated to the SKB context.
    #[inline]
    pub fn get_socket_uid(&self) -> u32 {
        unsafe { bpf_get_socket_uid(self.skb) }
    }

    #[inline]
    pub fn load<T>(&self, offset: usize) -> Result<T, c_long> {
        unsafe {
            let mut data = MaybeUninit::<T>::uninit();
            let ret = bpf_skb_load_bytes(
                self.skb.cast(),
                offset as u32,
                ptr::from_mut(&mut data).cast(),
                size_of_val(&data) as u32,
            );
            if ret == 0 {
                Ok(data.assume_init())
            } else {
                Err(ret)
            }
        }
    }

    /// Reads some bytes from the packet into the specified buffer, returning
    /// how many bytes were read.
    ///
    /// Starts reading at `offset` and reads at most `dst.len()` or
    /// `self.len() - offset` bytes, depending on which one is smaller.
    ///
    /// # Examples
    ///
    /// Read into a `PerCpuArray`.
    #[inline(always)]
    pub fn load_bytes(&self, offset: usize, dst: &mut [u8]) -> Result<usize, c_long> {
        let len = usize::try_from(self.len()).map_err(|core::num::TryFromIntError { .. }| -1)?;
        let len = len.checked_sub(offset).ok_or(-1)?;
        let len = len.min(dst.len());
        let len_u32 = u32::try_from(len).map_err(|core::num::TryFromIntError { .. }| -1)?;
        let ret = unsafe {
            bpf_skb_load_bytes(
                self.skb.cast(),
                offset as u32,
                dst.as_mut_ptr().cast(),
                len_u32,
            )
        };
        if ret == 0 { Ok(len) } else { Err(ret) }
    }

    #[inline]
    pub fn store<T>(&self, offset: usize, v: &T, flags: u64) -> Result<(), c_long> {
        unsafe {
            let ret = bpf_skb_store_bytes(
                self.skb.cast(),
                offset as u32,
                ptr::from_ref(v).cast(),
                size_of_val(v) as u32,
                flags,
            );
            if ret == 0 { Ok(()) } else { Err(ret) }
        }
    }

    #[inline]
    pub fn l3_csum_replace(
        &self,
        offset: usize,
        from: u64,
        to: u64,
        size: u64,
    ) -> Result<(), c_long> {
        unsafe {
            let ret = bpf_l3_csum_replace(self.skb.cast(), offset as u32, from, to, size);
            if ret == 0 { Ok(()) } else { Err(ret) }
        }
    }

    #[inline]
    pub fn l4_csum_replace(
        &self,
        offset: usize,
        from: u64,
        to: u64,
        flags: u64,
    ) -> Result<(), c_long> {
        unsafe {
            let ret = bpf_l4_csum_replace(self.skb.cast(), offset as u32, from, to, flags);
            if ret == 0 { Ok(()) } else { Err(ret) }
        }
    }

    #[inline]
    pub fn adjust_room(&self, len_diff: i32, mode: u32, flags: u64) -> Result<(), c_long> {
        let ret = unsafe { bpf_skb_adjust_room(self.skb, len_diff, mode, flags) };
        if ret == 0 { Ok(()) } else { Err(ret) }
    }

    #[inline]
    pub fn clone_redirect(&self, if_index: u32, flags: u64) -> Result<(), c_long> {
        let ret = unsafe { bpf_clone_redirect(self.skb, if_index, flags) };
        if ret == 0 { Ok(()) } else { Err(ret) }
    }

    #[inline]
    pub fn change_proto(&self, proto: u16, flags: u64) -> Result<(), c_long> {
        let ret = unsafe { bpf_skb_change_proto(self.skb, proto, flags) };
        if ret == 0 { Ok(()) } else { Err(ret) }
    }

    #[inline]
    pub fn change_type(&self, ty: u32) -> Result<(), c_long> {
        let ret = unsafe { bpf_skb_change_type(self.skb, ty) };
        if ret == 0 { Ok(()) } else { Err(ret) }
    }

    /// Pulls in non-linear data in case the skb is non-linear.
    ///
    /// Make len bytes from skb readable and writable. If a zero value is passed for
    /// `len`, then the whole length of the skb is pulled. This helper is only needed
    /// for reading and writing with direct packet access.
    #[inline(always)]
    pub fn pull_data(&self, len: u32) -> Result<(), c_long> {
        let ret = unsafe { bpf_skb_pull_data(self.skb, len) };
        if ret == 0 { Ok(()) } else { Err(ret) }
    }

    pub(crate) const fn as_ptr(&self) -> *mut c_void {
        self.skb.cast()
    }

    #[inline]
    pub fn protocol(&self) -> u32 {
        unsafe { (*self.skb).protocol }
    }

    #[inline]
    pub fn family(&self) -> u32 {
        unsafe { (*self.skb).family }
    }

    #[inline]
    pub fn local_ipv4(&self) -> u32 {
        unsafe { (*self.skb).local_ip4 }
    }

    #[inline]
    pub fn local_ipv6(&self) -> &[u32; 4] {
        unsafe { &(*self.skb).local_ip6 }
    }

    #[inline]
    pub fn remote_ipv4(&self) -> u32 {
        unsafe { (*self.skb).remote_ip4 }
    }

    #[inline]
    pub fn remote_ipv6(&self) -> &[u32; 4] {
        unsafe { &(*self.skb).remote_ip6 }
    }

    #[inline]
    pub fn local_port(&self) -> u32 {
        unsafe { (*self.skb).local_port }
    }

    #[inline]
    pub fn remote_port(&self) -> u32 {
        unsafe { (*self.skb).remote_port }
    }
}

pub struct SkBuffContext {
    pub skb: SkBuff,
}

impl SkBuffContext {
    pub const fn new(skb: *mut __sk_buff) -> Self {
        let skb = SkBuff { skb };
        Self { skb }
    }

    #[inline]
    pub fn len(&self) -> u32 {
        self.skb.len()
    }

    #[inline]
    pub fn set_mark(&self, mark: u32) {
        self.skb.set_mark(mark);
    }

    #[inline]
    pub fn cb(&self) -> &[u32] {
        self.skb.cb()
    }

    #[inline]
    pub fn cb_mut(&mut self) -> &mut [u32] {
        self.skb.cb_mut()
    }

    /// Returns the owner UID of the socket associated to the SKB context.
    #[inline]
    pub fn get_socket_uid(&self) -> u32 {
        self.skb.get_socket_uid()
    }

    #[inline]
    pub fn load<T>(&self, offset: usize) -> Result<T, c_long> {
        self.skb.load(offset)
    }

    /// Reads some bytes from the packet into the specified buffer, returning
    /// how many bytes were read.
    ///
    /// Starts reading at `offset` and reads at most `dst.len()` or
    /// `self.len() - offset` bytes, depending on which one is smaller.
    ///
    /// # Examples
    ///
    /// Read into a `PerCpuArray`.
    ///
    /// ```no_run
    /// use core::mem;
    ///
    /// use aya_ebpf::{bindings::TC_ACT_PIPE, macros::map, maps::PerCpuArray, programs::SkBuffContext};
    /// # #[expect(non_camel_case_types)]
    /// # struct ethhdr {};
    /// # #[expect(non_camel_case_types)]
    /// # struct iphdr {};
    /// # #[expect(non_camel_case_types)]
    /// # struct tcphdr {};
    ///
    /// const ETH_HDR_LEN: usize = mem::size_of::<ethhdr>();
    /// const IP_HDR_LEN: usize = mem::size_of::<iphdr>();
    /// const TCP_HDR_LEN: usize = mem::size_of::<tcphdr>();
    ///
    /// #[repr(C)]
    /// pub struct Buf {
    ///    pub buf: [u8; 1500],
    /// }
    ///
    /// #[map]
    /// pub static BUF: PerCpuArray<Buf> = PerCpuArray::with_max_entries(1, 0);
    ///
    /// fn try_cgroup_skb(ctx: SkBuffContext) -> Result<i32, i32> {
    ///     let buf = unsafe {
    ///         let ptr = BUF.get_ptr_mut(0).ok_or(TC_ACT_PIPE)?;
    ///         &mut *ptr
    ///     };
    ///     let offset = ETH_HDR_LEN + IP_HDR_LEN + TCP_HDR_LEN;
    ///     ctx.load_bytes(offset, &mut buf.buf).map_err(|_| TC_ACT_PIPE)?;
    ///
    ///     // do something with `buf`
    ///
    ///     Ok(TC_ACT_PIPE)
    /// }
    /// ```
    #[inline(always)]
    pub fn load_bytes(&self, offset: usize, dst: &mut [u8]) -> Result<usize, c_long> {
        self.skb.load_bytes(offset, dst)
    }

    #[inline]
    pub fn store<T>(&self, offset: usize, v: &T, flags: u64) -> Result<(), c_long> {
        self.skb.store(offset, v, flags)
    }

    #[inline]
    pub fn l3_csum_replace(
        &self,
        offset: usize,
        from: u64,
        to: u64,
        size: u64,
    ) -> Result<(), c_long> {
        self.skb.l3_csum_replace(offset, from, to, size)
    }

    #[inline]
    pub fn l4_csum_replace(
        &self,
        offset: usize,
        from: u64,
        to: u64,
        flags: u64,
    ) -> Result<(), c_long> {
        self.skb.l4_csum_replace(offset, from, to, flags)
    }

    #[inline]
    pub fn adjust_room(&self, len_diff: i32, mode: u32, flags: u64) -> Result<(), c_long> {
        self.skb.adjust_room(len_diff, mode, flags)
    }

    #[inline]
    pub fn clone_redirect(&self, if_index: u32, flags: u64) -> Result<(), c_long> {
        self.skb.clone_redirect(if_index, flags)
    }

    #[inline]
    pub fn change_type(&self, ty: u32) -> Result<(), c_long> {
        self.skb.change_type(ty)
    }

    /// Pulls in non-linear data in case the skb is non-linear.
    ///
    /// Make len bytes from skb readable and writable. If a zero value is passed for
    /// `len`, then the whole length of the skb is pulled. This helper is only needed
    /// for reading and writing with direct packet access.
    ///
    /// # Examples
    ///
    /// ```no_run
    /// use aya_ebpf::programs::SkBuffContext;
    /// # #[expect(non_camel_case_types)]
    /// # struct ethhdr {};
    /// # #[expect(non_camel_case_types)]
    /// # struct iphdr {};
    /// # #[expect(non_camel_case_types)]
    /// # struct udphdr {};
    ///
    /// const ETH_HLEN: usize = core::mem::size_of::<ethhdr>();
    /// const IP_HLEN: usize = core::mem::size_of::<iphdr>();
    /// const UDP_HLEN: usize = core::mem::size_of::<udphdr>();
    ///
    /// fn try_cgroup_skb(ctx: SkBuffContext) -> Result<i32, i32> {
    ///     let len = ETH_HLEN + IP_HLEN + UDP_HLEN;
    ///     match ctx.pull_data(len as u32) {
    ///         Ok(()) => Ok(0),
    ///         Err(ret) => Err(ret as i32),
    ///     }
    /// }
    /// ```
    #[inline(always)]
    pub fn pull_data(&self, len: u32) -> Result<(), c_long> {
        self.skb.pull_data(len)
    }
}

impl EbpfContext for SkBuffContext {
    fn as_ptr(&self) -> *mut c_void {
        self.skb.as_ptr()
    }
}