// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::get_rate_based_statement_managed_keys::_get_rate_based_statement_managed_keys_input::GetRateBasedStatementManagedKeysInputBuilder;
pub use crate::operation::get_rate_based_statement_managed_keys::_get_rate_based_statement_managed_keys_output::GetRateBasedStatementManagedKeysOutputBuilder;
impl crate::operation::get_rate_based_statement_managed_keys::builders::GetRateBasedStatementManagedKeysInputBuilder {
/// Sends a request with this input using the given client.
pub async fn send_with(
self,
client: &crate::Client,
) -> ::std::result::Result<
crate::operation::get_rate_based_statement_managed_keys::GetRateBasedStatementManagedKeysOutput,
::aws_smithy_runtime_api::client::result::SdkError<
crate::operation::get_rate_based_statement_managed_keys::GetRateBasedStatementManagedKeysError,
::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
>,
> {
let mut fluent_builder = client.get_rate_based_statement_managed_keys();
fluent_builder.inner = self;
fluent_builder.send().await
}
}
/// Fluent builder constructing a request to `GetRateBasedStatementManagedKeys`.
///
/// <p>Retrieves the IP addresses that are currently blocked by a rate-based rule instance. This is only available for rate-based rules that aggregate solely on the IP address or on the forwarded IP address.</p>
/// <p>The maximum number of addresses that can be blocked for a single rate-based rule instance is 10,000. If more than 10,000 addresses exceed the rate limit, those with the highest rates are blocked.</p>
/// <p>For a rate-based rule that you've defined inside a rule group, provide the name of the rule group reference statement in your request, in addition to the rate-based rule name and the web ACL name.</p>
/// <p>WAF monitors web requests and manages keys independently for each unique combination of web ACL, optional rule group, and rate-based rule. For example, if you define a rate-based rule inside a rule group, and then use the rule group in a web ACL, WAF monitors web requests and manages keys for that web ACL, rule group reference statement, and rate-based rule instance. If you use the same rule group in a second web ACL, WAF monitors web requests and manages keys for this second usage completely independent of your first.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct GetRateBasedStatementManagedKeysFluentBuilder {
handle: ::std::sync::Arc<crate::client::Handle>,
inner: crate::operation::get_rate_based_statement_managed_keys::builders::GetRateBasedStatementManagedKeysInputBuilder,
config_override: ::std::option::Option<crate::config::Builder>,
}
impl
crate::client::customize::internal::CustomizableSend<
crate::operation::get_rate_based_statement_managed_keys::GetRateBasedStatementManagedKeysOutput,
crate::operation::get_rate_based_statement_managed_keys::GetRateBasedStatementManagedKeysError,
> for GetRateBasedStatementManagedKeysFluentBuilder
{
fn send(
self,
config_override: crate::config::Builder,
) -> crate::client::customize::internal::BoxFuture<
crate::client::customize::internal::SendResult<
crate::operation::get_rate_based_statement_managed_keys::GetRateBasedStatementManagedKeysOutput,
crate::operation::get_rate_based_statement_managed_keys::GetRateBasedStatementManagedKeysError,
>,
> {
::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
}
}
impl GetRateBasedStatementManagedKeysFluentBuilder {
/// Creates a new `GetRateBasedStatementManagedKeysFluentBuilder`.
pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
Self {
handle,
inner: ::std::default::Default::default(),
config_override: ::std::option::Option::None,
}
}
/// Access the GetRateBasedStatementManagedKeys as a reference.
pub fn as_input(&self) -> &crate::operation::get_rate_based_statement_managed_keys::builders::GetRateBasedStatementManagedKeysInputBuilder {
&self.inner
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> ::std::result::Result<
crate::operation::get_rate_based_statement_managed_keys::GetRateBasedStatementManagedKeysOutput,
::aws_smithy_runtime_api::client::result::SdkError<
crate::operation::get_rate_based_statement_managed_keys::GetRateBasedStatementManagedKeysError,
::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
>,
> {
let input = self
.inner
.build()
.map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
let runtime_plugins = crate::operation::get_rate_based_statement_managed_keys::GetRateBasedStatementManagedKeys::operation_runtime_plugins(
self.handle.runtime_plugins.clone(),
&self.handle.conf,
self.config_override,
);
crate::operation::get_rate_based_statement_managed_keys::GetRateBasedStatementManagedKeys::orchestrate(&runtime_plugins, input).await
}
/// Consumes this builder, creating a customizable operation that can be modified before being sent.
pub fn customize(
self,
) -> crate::client::customize::CustomizableOperation<
crate::operation::get_rate_based_statement_managed_keys::GetRateBasedStatementManagedKeysOutput,
crate::operation::get_rate_based_statement_managed_keys::GetRateBasedStatementManagedKeysError,
Self,
> {
crate::client::customize::CustomizableOperation::new(self)
}
pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
self.set_config_override(::std::option::Option::Some(config_override.into()));
self
}
pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
self.config_override = config_override;
self
}
/// <p>Specifies whether this is for a global resource type, such as a Amazon CloudFront distribution. For an Amplify application, use <code>CLOUDFRONT</code>.</p>
/// <p>To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:</p>
/// <ul>
/// <li>
/// <p>CLI - Specify the Region when you use the CloudFront scope: <code>--scope=CLOUDFRONT --region=us-east-1</code>.</p></li>
/// <li>
/// <p>API and SDKs - For all calls, use the Region endpoint us-east-1.</p></li>
/// </ul>
pub fn scope(mut self, input: crate::types::Scope) -> Self {
self.inner = self.inner.scope(input);
self
}
/// <p>Specifies whether this is for a global resource type, such as a Amazon CloudFront distribution. For an Amplify application, use <code>CLOUDFRONT</code>.</p>
/// <p>To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:</p>
/// <ul>
/// <li>
/// <p>CLI - Specify the Region when you use the CloudFront scope: <code>--scope=CLOUDFRONT --region=us-east-1</code>.</p></li>
/// <li>
/// <p>API and SDKs - For all calls, use the Region endpoint us-east-1.</p></li>
/// </ul>
pub fn set_scope(mut self, input: ::std::option::Option<crate::types::Scope>) -> Self {
self.inner = self.inner.set_scope(input);
self
}
/// <p>Specifies whether this is for a global resource type, such as a Amazon CloudFront distribution. For an Amplify application, use <code>CLOUDFRONT</code>.</p>
/// <p>To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:</p>
/// <ul>
/// <li>
/// <p>CLI - Specify the Region when you use the CloudFront scope: <code>--scope=CLOUDFRONT --region=us-east-1</code>.</p></li>
/// <li>
/// <p>API and SDKs - For all calls, use the Region endpoint us-east-1.</p></li>
/// </ul>
pub fn get_scope(&self) -> &::std::option::Option<crate::types::Scope> {
self.inner.get_scope()
}
/// <p>The name of the web ACL. You cannot change the name of a web ACL after you create it.</p>
pub fn web_acl_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.web_acl_name(input.into());
self
}
/// <p>The name of the web ACL. You cannot change the name of a web ACL after you create it.</p>
pub fn set_web_acl_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_web_acl_name(input);
self
}
/// <p>The name of the web ACL. You cannot change the name of a web ACL after you create it.</p>
pub fn get_web_acl_name(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_web_acl_name()
}
/// <p>The unique identifier for the web ACL. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.</p>
pub fn web_acl_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.web_acl_id(input.into());
self
}
/// <p>The unique identifier for the web ACL. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.</p>
pub fn set_web_acl_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_web_acl_id(input);
self
}
/// <p>The unique identifier for the web ACL. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.</p>
pub fn get_web_acl_id(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_web_acl_id()
}
/// <p>The name of the rule group reference statement in your web ACL. This is required only when you have the rate-based rule nested inside a rule group.</p>
pub fn rule_group_rule_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.rule_group_rule_name(input.into());
self
}
/// <p>The name of the rule group reference statement in your web ACL. This is required only when you have the rate-based rule nested inside a rule group.</p>
pub fn set_rule_group_rule_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_rule_group_rule_name(input);
self
}
/// <p>The name of the rule group reference statement in your web ACL. This is required only when you have the rate-based rule nested inside a rule group.</p>
pub fn get_rule_group_rule_name(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_rule_group_rule_name()
}
/// <p>The name of the rate-based rule to get the keys for. If you have the rule defined inside a rule group that you're using in your web ACL, also provide the name of the rule group reference statement in the request parameter <code>RuleGroupRuleName</code>.</p>
pub fn rule_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.rule_name(input.into());
self
}
/// <p>The name of the rate-based rule to get the keys for. If you have the rule defined inside a rule group that you're using in your web ACL, also provide the name of the rule group reference statement in the request parameter <code>RuleGroupRuleName</code>.</p>
pub fn set_rule_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_rule_name(input);
self
}
/// <p>The name of the rate-based rule to get the keys for. If you have the rule defined inside a rule group that you're using in your web ACL, also provide the name of the rule group reference statement in the request parameter <code>RuleGroupRuleName</code>.</p>
pub fn get_rule_name(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_rule_name()
}
}