// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::create_rule_group::_create_rule_group_input::CreateRuleGroupInputBuilder;
pub use crate::operation::create_rule_group::_create_rule_group_output::CreateRuleGroupOutputBuilder;
impl crate::operation::create_rule_group::builders::CreateRuleGroupInputBuilder {
/// Sends a request with this input using the given client.
pub async fn send_with(
self,
client: &crate::Client,
) -> ::std::result::Result<
crate::operation::create_rule_group::CreateRuleGroupOutput,
::aws_smithy_runtime_api::client::result::SdkError<
crate::operation::create_rule_group::CreateRuleGroupError,
::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
>,
> {
let mut fluent_builder = client.create_rule_group();
fluent_builder.inner = self;
fluent_builder.send().await
}
}
/// Fluent builder constructing a request to `CreateRuleGroup`.
///
/// <p>Creates a <code>RuleGroup</code> per the specifications provided.</p>
/// <p>A rule group defines a collection of rules to inspect and control web requests that you can use in a <code>WebACL</code>. When you create a rule group, you define an immutable capacity limit. If you update a rule group, you must stay within the capacity. This allows others to reuse the rule group with confidence in its capacity requirements.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct CreateRuleGroupFluentBuilder {
handle: ::std::sync::Arc<crate::client::Handle>,
inner: crate::operation::create_rule_group::builders::CreateRuleGroupInputBuilder,
config_override: ::std::option::Option<crate::config::Builder>,
}
impl
crate::client::customize::internal::CustomizableSend<
crate::operation::create_rule_group::CreateRuleGroupOutput,
crate::operation::create_rule_group::CreateRuleGroupError,
> for CreateRuleGroupFluentBuilder
{
fn send(
self,
config_override: crate::config::Builder,
) -> crate::client::customize::internal::BoxFuture<
crate::client::customize::internal::SendResult<
crate::operation::create_rule_group::CreateRuleGroupOutput,
crate::operation::create_rule_group::CreateRuleGroupError,
>,
> {
::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
}
}
impl CreateRuleGroupFluentBuilder {
/// Creates a new `CreateRuleGroupFluentBuilder`.
pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
Self {
handle,
inner: ::std::default::Default::default(),
config_override: ::std::option::Option::None,
}
}
/// Access the CreateRuleGroup as a reference.
pub fn as_input(&self) -> &crate::operation::create_rule_group::builders::CreateRuleGroupInputBuilder {
&self.inner
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> ::std::result::Result<
crate::operation::create_rule_group::CreateRuleGroupOutput,
::aws_smithy_runtime_api::client::result::SdkError<
crate::operation::create_rule_group::CreateRuleGroupError,
::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
>,
> {
let input = self
.inner
.build()
.map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
let runtime_plugins = crate::operation::create_rule_group::CreateRuleGroup::operation_runtime_plugins(
self.handle.runtime_plugins.clone(),
&self.handle.conf,
self.config_override,
);
crate::operation::create_rule_group::CreateRuleGroup::orchestrate(&runtime_plugins, input).await
}
/// Consumes this builder, creating a customizable operation that can be modified before being sent.
pub fn customize(
self,
) -> crate::client::customize::CustomizableOperation<
crate::operation::create_rule_group::CreateRuleGroupOutput,
crate::operation::create_rule_group::CreateRuleGroupError,
Self,
> {
crate::client::customize::CustomizableOperation::new(self)
}
pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
self.set_config_override(::std::option::Option::Some(config_override.into()));
self
}
pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
self.config_override = config_override;
self
}
/// <p>The name of the rule group. You cannot change the name of a rule group after you create it.</p>
pub fn name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.name(input.into());
self
}
/// <p>The name of the rule group. You cannot change the name of a rule group after you create it.</p>
pub fn set_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_name(input);
self
}
/// <p>The name of the rule group. You cannot change the name of a rule group after you create it.</p>
pub fn get_name(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_name()
}
/// <p>Specifies whether this is for a global resource type, such as a Amazon CloudFront distribution. For an Amplify application, use <code>CLOUDFRONT</code>.</p>
/// <p>To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:</p>
/// <ul>
/// <li>
/// <p>CLI - Specify the Region when you use the CloudFront scope: <code>--scope=CLOUDFRONT --region=us-east-1</code>.</p></li>
/// <li>
/// <p>API and SDKs - For all calls, use the Region endpoint us-east-1.</p></li>
/// </ul>
pub fn scope(mut self, input: crate::types::Scope) -> Self {
self.inner = self.inner.scope(input);
self
}
/// <p>Specifies whether this is for a global resource type, such as a Amazon CloudFront distribution. For an Amplify application, use <code>CLOUDFRONT</code>.</p>
/// <p>To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:</p>
/// <ul>
/// <li>
/// <p>CLI - Specify the Region when you use the CloudFront scope: <code>--scope=CLOUDFRONT --region=us-east-1</code>.</p></li>
/// <li>
/// <p>API and SDKs - For all calls, use the Region endpoint us-east-1.</p></li>
/// </ul>
pub fn set_scope(mut self, input: ::std::option::Option<crate::types::Scope>) -> Self {
self.inner = self.inner.set_scope(input);
self
}
/// <p>Specifies whether this is for a global resource type, such as a Amazon CloudFront distribution. For an Amplify application, use <code>CLOUDFRONT</code>.</p>
/// <p>To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:</p>
/// <ul>
/// <li>
/// <p>CLI - Specify the Region when you use the CloudFront scope: <code>--scope=CLOUDFRONT --region=us-east-1</code>.</p></li>
/// <li>
/// <p>API and SDKs - For all calls, use the Region endpoint us-east-1.</p></li>
/// </ul>
pub fn get_scope(&self) -> &::std::option::Option<crate::types::Scope> {
self.inner.get_scope()
}
/// <p>The web ACL capacity units (WCUs) required for this rule group.</p>
/// <p>When you create your own rule group, you define this, and you cannot change it after creation. When you add or modify the rules in a rule group, WAF enforces this limit. You can check the capacity for a set of rules using <code>CheckCapacity</code>.</p>
/// <p>WAF uses WCUs to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect the relative cost of each rule. Simple rules that cost little to run use fewer WCUs than more complex rules that use more processing power. Rule group capacity is fixed at creation, which helps users plan their web ACL WCU usage when they use a rule group. For more information, see <a href="https://docs.aws.amazon.com/waf/latest/developerguide/aws-waf-capacity-units.html">WAF web ACL capacity units (WCU)</a> in the <i>WAF Developer Guide</i>.</p>
pub fn capacity(mut self, input: i64) -> Self {
self.inner = self.inner.capacity(input);
self
}
/// <p>The web ACL capacity units (WCUs) required for this rule group.</p>
/// <p>When you create your own rule group, you define this, and you cannot change it after creation. When you add or modify the rules in a rule group, WAF enforces this limit. You can check the capacity for a set of rules using <code>CheckCapacity</code>.</p>
/// <p>WAF uses WCUs to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect the relative cost of each rule. Simple rules that cost little to run use fewer WCUs than more complex rules that use more processing power. Rule group capacity is fixed at creation, which helps users plan their web ACL WCU usage when they use a rule group. For more information, see <a href="https://docs.aws.amazon.com/waf/latest/developerguide/aws-waf-capacity-units.html">WAF web ACL capacity units (WCU)</a> in the <i>WAF Developer Guide</i>.</p>
pub fn set_capacity(mut self, input: ::std::option::Option<i64>) -> Self {
self.inner = self.inner.set_capacity(input);
self
}
/// <p>The web ACL capacity units (WCUs) required for this rule group.</p>
/// <p>When you create your own rule group, you define this, and you cannot change it after creation. When you add or modify the rules in a rule group, WAF enforces this limit. You can check the capacity for a set of rules using <code>CheckCapacity</code>.</p>
/// <p>WAF uses WCUs to calculate and control the operating resources that are used to run your rules, rule groups, and web ACLs. WAF calculates capacity differently for each rule type, to reflect the relative cost of each rule. Simple rules that cost little to run use fewer WCUs than more complex rules that use more processing power. Rule group capacity is fixed at creation, which helps users plan their web ACL WCU usage when they use a rule group. For more information, see <a href="https://docs.aws.amazon.com/waf/latest/developerguide/aws-waf-capacity-units.html">WAF web ACL capacity units (WCU)</a> in the <i>WAF Developer Guide</i>.</p>
pub fn get_capacity(&self) -> &::std::option::Option<i64> {
self.inner.get_capacity()
}
/// <p>A description of the rule group that helps with identification.</p>
pub fn description(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.description(input.into());
self
}
/// <p>A description of the rule group that helps with identification.</p>
pub fn set_description(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_description(input);
self
}
/// <p>A description of the rule group that helps with identification.</p>
pub fn get_description(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_description()
}
///
/// Appends an item to `Rules`.
///
/// To override the contents of this collection use [`set_rules`](Self::set_rules).
///
/// <p>The <code>Rule</code> statements used to identify the web requests that you want to manage. Each rule includes one top-level statement that WAF uses to identify matching web requests, and parameters that govern how WAF handles them.</p>
pub fn rules(mut self, input: crate::types::Rule) -> Self {
self.inner = self.inner.rules(input);
self
}
/// <p>The <code>Rule</code> statements used to identify the web requests that you want to manage. Each rule includes one top-level statement that WAF uses to identify matching web requests, and parameters that govern how WAF handles them.</p>
pub fn set_rules(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::Rule>>) -> Self {
self.inner = self.inner.set_rules(input);
self
}
/// <p>The <code>Rule</code> statements used to identify the web requests that you want to manage. Each rule includes one top-level statement that WAF uses to identify matching web requests, and parameters that govern how WAF handles them.</p>
pub fn get_rules(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::Rule>> {
self.inner.get_rules()
}
/// <p>Defines and enables Amazon CloudWatch metrics and web request sample collection.</p>
pub fn visibility_config(mut self, input: crate::types::VisibilityConfig) -> Self {
self.inner = self.inner.visibility_config(input);
self
}
/// <p>Defines and enables Amazon CloudWatch metrics and web request sample collection.</p>
pub fn set_visibility_config(mut self, input: ::std::option::Option<crate::types::VisibilityConfig>) -> Self {
self.inner = self.inner.set_visibility_config(input);
self
}
/// <p>Defines and enables Amazon CloudWatch metrics and web request sample collection.</p>
pub fn get_visibility_config(&self) -> &::std::option::Option<crate::types::VisibilityConfig> {
self.inner.get_visibility_config()
}
///
/// Appends an item to `Tags`.
///
/// To override the contents of this collection use [`set_tags`](Self::set_tags).
///
/// <p>An array of key:value pairs to associate with the resource.</p>
pub fn tags(mut self, input: crate::types::Tag) -> Self {
self.inner = self.inner.tags(input);
self
}
/// <p>An array of key:value pairs to associate with the resource.</p>
pub fn set_tags(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::Tag>>) -> Self {
self.inner = self.inner.set_tags(input);
self
}
/// <p>An array of key:value pairs to associate with the resource.</p>
pub fn get_tags(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::Tag>> {
self.inner.get_tags()
}
///
/// Adds a key-value pair to `CustomResponseBodies`.
///
/// To override the contents of this collection use [`set_custom_response_bodies`](Self::set_custom_response_bodies).
///
/// <p>A map of custom response keys and content bodies. When you create a rule with a block action, you can send a custom response to the web request. You define these for the rule group, and then use them in the rules that you define in the rule group.</p>
/// <p>For information about customizing web requests and responses, see <a href="https://docs.aws.amazon.com/waf/latest/developerguide/waf-custom-request-response.html">Customizing web requests and responses in WAF</a> in the <i>WAF Developer Guide</i>.</p>
/// <p>For information about the limits on count and size for custom request and response settings, see <a href="https://docs.aws.amazon.com/waf/latest/developerguide/limits.html">WAF quotas</a> in the <i>WAF Developer Guide</i>.</p>
pub fn custom_response_bodies(mut self, k: impl ::std::convert::Into<::std::string::String>, v: crate::types::CustomResponseBody) -> Self {
self.inner = self.inner.custom_response_bodies(k.into(), v);
self
}
/// <p>A map of custom response keys and content bodies. When you create a rule with a block action, you can send a custom response to the web request. You define these for the rule group, and then use them in the rules that you define in the rule group.</p>
/// <p>For information about customizing web requests and responses, see <a href="https://docs.aws.amazon.com/waf/latest/developerguide/waf-custom-request-response.html">Customizing web requests and responses in WAF</a> in the <i>WAF Developer Guide</i>.</p>
/// <p>For information about the limits on count and size for custom request and response settings, see <a href="https://docs.aws.amazon.com/waf/latest/developerguide/limits.html">WAF quotas</a> in the <i>WAF Developer Guide</i>.</p>
pub fn set_custom_response_bodies(
mut self,
input: ::std::option::Option<::std::collections::HashMap<::std::string::String, crate::types::CustomResponseBody>>,
) -> Self {
self.inner = self.inner.set_custom_response_bodies(input);
self
}
/// <p>A map of custom response keys and content bodies. When you create a rule with a block action, you can send a custom response to the web request. You define these for the rule group, and then use them in the rules that you define in the rule group.</p>
/// <p>For information about customizing web requests and responses, see <a href="https://docs.aws.amazon.com/waf/latest/developerguide/waf-custom-request-response.html">Customizing web requests and responses in WAF</a> in the <i>WAF Developer Guide</i>.</p>
/// <p>For information about the limits on count and size for custom request and response settings, see <a href="https://docs.aws.amazon.com/waf/latest/developerguide/limits.html">WAF quotas</a> in the <i>WAF Developer Guide</i>.</p>
pub fn get_custom_response_bodies(
&self,
) -> &::std::option::Option<::std::collections::HashMap<::std::string::String, crate::types::CustomResponseBody>> {
self.inner.get_custom_response_bodies()
}
/// <p>The monetization configuration for the rule group. Provide this when any rule in the rule group uses the <code>Monetize</code> action.</p>
pub fn monetization_config(mut self, input: crate::types::MonetizationConfig) -> Self {
self.inner = self.inner.monetization_config(input);
self
}
/// <p>The monetization configuration for the rule group. Provide this when any rule in the rule group uses the <code>Monetize</code> action.</p>
pub fn set_monetization_config(mut self, input: ::std::option::Option<crate::types::MonetizationConfig>) -> Self {
self.inner = self.inner.set_monetization_config(input);
self
}
/// <p>The monetization configuration for the rule group. Provide this when any rule in the rule group uses the <code>Monetize</code> action.</p>
pub fn get_monetization_config(&self) -> &::std::option::Option<crate::types::MonetizationConfig> {
self.inner.get_monetization_config()
}
}