// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::get_parameter::_get_parameter_input::GetParameterInputBuilder;
pub use crate::operation::get_parameter::_get_parameter_output::GetParameterOutputBuilder;
impl crate::operation::get_parameter::builders::GetParameterInputBuilder {
/// Sends a request with this input using the given client.
pub async fn send_with(
self,
client: &crate::Client,
) -> ::std::result::Result<
crate::operation::get_parameter::GetParameterOutput,
::aws_smithy_runtime_api::client::result::SdkError<
crate::operation::get_parameter::GetParameterError,
::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
>,
> {
let mut fluent_builder = client.get_parameter();
fluent_builder.inner = self;
fluent_builder.send().await
}
}
/// Fluent builder constructing a request to `GetParameter`.
///
/// <p>Get information about a single parameter by specifying the parameter name.</p>
/// <p>Parameter names can't contain spaces. The service removes any spaces specified for the beginning or end of a parameter name. If the specified name for a parameter contains spaces between characters, the request fails with a <code>ValidationException</code> error.</p><note>
/// <p>To get information about more than one parameter at a time, use the <code>GetParameters</code> operation.</p>
/// </note> <note>
/// <p>Parameter Store throughput defines the number of API transactions per second (TPS) that Systems Manager can process. This applies to <code>GetParameter</code>, <code>GetParameters</code>, and <code>PutParameter</code> API calls for your Amazon Web Services account and Amazon Web Services Region. By default, Parameter Store is configured with a standard throughput quota suitable for low- to moderate-volume workloads. Applications that retrieve configuration data infrequently or operate at smaller scale can use this default setting without additional cost.</p>
/// <p>For higher-volume workloads, you can enable higher throughput. This increases the maximum number of supported transactions per second for your account and Region. Increased throughput supports applications and workloads that need concurrent access to multiple parameters. If you experience <code>ThrottlingException: Rate exceeded</code> errors, enable higher throughput. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/parameter-store-throughput.html">Changing Parameter Store throughput</a>.</p>
/// </note>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct GetParameterFluentBuilder {
handle: ::std::sync::Arc<crate::client::Handle>,
inner: crate::operation::get_parameter::builders::GetParameterInputBuilder,
config_override: ::std::option::Option<crate::config::Builder>,
}
impl
crate::client::customize::internal::CustomizableSend<
crate::operation::get_parameter::GetParameterOutput,
crate::operation::get_parameter::GetParameterError,
> for GetParameterFluentBuilder
{
fn send(
self,
config_override: crate::config::Builder,
) -> crate::client::customize::internal::BoxFuture<
crate::client::customize::internal::SendResult<
crate::operation::get_parameter::GetParameterOutput,
crate::operation::get_parameter::GetParameterError,
>,
> {
::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
}
}
impl GetParameterFluentBuilder {
/// Creates a new `GetParameterFluentBuilder`.
pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
Self {
handle,
inner: ::std::default::Default::default(),
config_override: ::std::option::Option::None,
}
}
/// Access the GetParameter as a reference.
pub fn as_input(&self) -> &crate::operation::get_parameter::builders::GetParameterInputBuilder {
&self.inner
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> ::std::result::Result<
crate::operation::get_parameter::GetParameterOutput,
::aws_smithy_runtime_api::client::result::SdkError<
crate::operation::get_parameter::GetParameterError,
::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
>,
> {
let input = self
.inner
.build()
.map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
let runtime_plugins = crate::operation::get_parameter::GetParameter::operation_runtime_plugins(
self.handle.runtime_plugins.clone(),
&self.handle.conf,
self.config_override,
);
crate::operation::get_parameter::GetParameter::orchestrate(&runtime_plugins, input).await
}
/// Consumes this builder, creating a customizable operation that can be modified before being sent.
pub fn customize(
self,
) -> crate::client::customize::CustomizableOperation<
crate::operation::get_parameter::GetParameterOutput,
crate::operation::get_parameter::GetParameterError,
Self,
> {
crate::client::customize::CustomizableOperation::new(self)
}
pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
self.set_config_override(::std::option::Option::Some(config_override.into()));
self
}
pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
self.config_override = config_override;
self
}
/// <p>The name or Amazon Resource Name (ARN) of the parameter that you want to query. For parameters shared with you from another account, you must use the full ARN.</p>
/// <p>To query by parameter label, use <code>"Name": "name:label"</code>. To query by parameter version, use <code>"Name": "name:version"</code>.</p>
/// <p>For more information about shared parameters, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/parameter-store-shared-parameters.html">Working with shared parameters</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
pub fn name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.inner = self.inner.name(input.into());
self
}
/// <p>The name or Amazon Resource Name (ARN) of the parameter that you want to query. For parameters shared with you from another account, you must use the full ARN.</p>
/// <p>To query by parameter label, use <code>"Name": "name:label"</code>. To query by parameter version, use <code>"Name": "name:version"</code>.</p>
/// <p>For more information about shared parameters, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/parameter-store-shared-parameters.html">Working with shared parameters</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
pub fn set_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.inner = self.inner.set_name(input);
self
}
/// <p>The name or Amazon Resource Name (ARN) of the parameter that you want to query. For parameters shared with you from another account, you must use the full ARN.</p>
/// <p>To query by parameter label, use <code>"Name": "name:label"</code>. To query by parameter version, use <code>"Name": "name:version"</code>.</p>
/// <p>For more information about shared parameters, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/parameter-store-shared-parameters.html">Working with shared parameters</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
pub fn get_name(&self) -> &::std::option::Option<::std::string::String> {
self.inner.get_name()
}
/// <p>Return decrypted values for secure string parameters. This flag is ignored for <code>String</code> and <code>StringList</code> parameter types.</p>
pub fn with_decryption(mut self, input: bool) -> Self {
self.inner = self.inner.with_decryption(input);
self
}
/// <p>Return decrypted values for secure string parameters. This flag is ignored for <code>String</code> and <code>StringList</code> parameter types.</p>
pub fn set_with_decryption(mut self, input: ::std::option::Option<bool>) -> Self {
self.inner = self.inner.set_with_decryption(input);
self
}
/// <p>Return decrypted values for secure string parameters. This flag is ignored for <code>String</code> and <code>StringList</code> parameter types.</p>
pub fn get_with_decryption(&self) -> &::std::option::Option<bool> {
self.inner.get_with_decryption()
}
}