// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
/// <p></p>
#[non_exhaustive]
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::fmt::Debug)]
pub struct SetQueueAttributesInput {
/// <p>The URL of the Amazon SQS queue whose attributes are set.</p>
/// <p>Queue URLs and names are case-sensitive.</p>
pub queue_url: ::std::option::Option<::std::string::String>,
/// <p>A map of attributes to set.</p>
/// <p>The following lists the names, descriptions, and values of the special request parameters that the <code>SetQueueAttributes</code> action uses:</p>
/// <ul>
/// <li>
/// <p><code>DelaySeconds</code> – The length of time, in seconds, for which the delivery of all messages in the queue is delayed. Valid values: An integer from 0 to 900 (15 minutes). Default: 0.</p></li>
/// <li>
/// <p><code>MaximumMessageSize</code> – The limit of how many bytes a message can contain before Amazon SQS rejects it. Valid values: An integer from 1,024 bytes (1 KiB) up to 1,048,576 bytes (1 MiB). Default: 1,048,576 bytes (1 MiB).</p></li>
/// <li>
/// <p><code>MessageRetentionPeriod</code> – The length of time, in seconds, for which Amazon SQS retains a message. Valid values: An integer representing seconds, from 60 (1 minute) to 1,209,600 (14 days). Default: 345,600 (4 days). When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the <code>MessageRetentionPeriod</code> attribute can take up to 15 minutes and will impact existing messages in the queue potentially causing them to be expired and deleted if the <code>MessageRetentionPeriod</code> is reduced below the age of existing messages.</p></li>
/// <li>
/// <p><code>Policy</code> – The queue's policy. A valid Amazon Web Services policy. For more information about policy structure, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/PoliciesOverview.html">Overview of Amazon Web Services IAM Policies</a> in the <i>Identity and Access Management User Guide</i>.</p></li>
/// <li>
/// <p><code>ReceiveMessageWaitTimeSeconds</code> – The length of time, in seconds, for which a <code> <code>ReceiveMessage</code> </code> action waits for a message to arrive. Valid values: An integer from 0 to 20 (seconds). Default: 0.</p></li>
/// <li>
/// <p><code>VisibilityTimeout</code> – The visibility timeout for the queue, in seconds. Valid values: An integer from 0 to 43,200 (12 hours). Default: 30. For more information about the visibility timeout, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html">Visibility Timeout</a> in the <i>Amazon SQS Developer Guide</i>.</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">dead-letter queues:</a></p>
/// <ul>
/// <li>
/// <p><code>RedrivePolicy</code> – The string that includes the parameters for the dead-letter queue functionality of the source queue as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>deadLetterTargetArn</code> – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of <code>maxReceiveCount</code> is exceeded.</p></li>
/// <li>
/// <p><code>maxReceiveCount</code> – The number of times a message is delivered to the source queue before being moved to the dead-letter queue. Default: 10. When the <code>ReceiveCount</code> for a message exceeds the <code>maxReceiveCount</code> for a queue, Amazon SQS moves the message to the dead-letter-queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>RedriveAllowPolicy</code> – The string that includes the parameters for the permissions for the dead-letter queue redrive permission and which source queues can specify dead-letter queues as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>redrivePermission</code> – The permission type that defines which source queues can specify the current queue as the dead-letter queue. Valid values are:</p>
/// <ul>
/// <li>
/// <p><code>allowAll</code> – (Default) Any source queues in this Amazon Web Services account in the same Region can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>denyAll</code> – No source queues can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>byQueue</code> – Only queues specified by the <code>sourceQueueArns</code> parameter can specify this queue as the dead-letter queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>sourceQueueArns</code> – The Amazon Resource Names (ARN)s of the source queues that can specify this queue as the dead-letter queue and redrive messages. You can specify this parameter only when the <code>redrivePermission</code> parameter is set to <code>byQueue</code>. You can specify up to 10 source queue ARNs. To allow more than 10 source queues to specify dead-letter queues, set the <code>redrivePermission</code> parameter to <code>allowAll</code>.</p></li>
/// </ul></li>
/// </ul><note>
/// <p>The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.</p>
/// </note>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html">server-side-encryption</a>:</p>
/// <ul>
/// <li>
/// <p><code>KmsMasterKeyId</code> – The ID of an Amazon Web Services managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-sse-key-terms">Key Terms</a>. While the alias of the AWS-managed CMK for Amazon SQS is always <code>alias/aws/sqs</code>, the alias of a custom CMK can, for example, be <code>alias/<i>MyAlias</i> </code>. For more examples, see <a href="https://docs.aws.amazon.com/kms/latest/APIReference/API_DescribeKey.html#API_DescribeKey_RequestParameters">KeyId</a> in the <i>Key Management Service API Reference</i>.</p></li>
/// <li>
/// <p><code>KmsDataKeyReusePeriodSeconds</code> – The length of time, in seconds, for which Amazon SQS can reuse a <a href="https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#data-keys">data key</a> to encrypt or decrypt messages before calling KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes). A shorter time period provides better security but results in more calls to KMS which might incur charges after Free Tier. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work">How Does the Data Key Reuse Period Work?</a>.</p></li>
/// <li>
/// <p><code>SqsManagedSseEnabled</code> – Enables server-side queue encryption using SQS owned encryption keys. Only one server-side encryption option is supported per queue (for example, <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sse-existing-queue.html">SSE-KMS</a> or <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sqs-sse-queue.html">SSE-SQS</a>).</p></li>
/// </ul>
/// <p>The following attribute applies only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO (first-in-first-out) queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>ContentBasedDeduplication</code> – Enables content-based deduplication. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-exactly-once-processing.html">Exactly-once processing</a> in the <i>Amazon SQS Developer Guide</i>. Note the following:</p>
/// <ul>
/// <li>
/// <p>Every message must have a unique <code>MessageDeduplicationId</code>.</p>
/// <ul>
/// <li>
/// <p>You may provide a <code>MessageDeduplicationId</code> explicitly.</p></li>
/// <li>
/// <p>If you aren't able to provide a <code>MessageDeduplicationId</code> and you enable <code>ContentBasedDeduplication</code> for your queue, Amazon SQS uses a SHA-256 hash to generate the <code>MessageDeduplicationId</code> using the body of the message (but not the attributes of the message).</p></li>
/// <li>
/// <p>If you don't provide a <code>MessageDeduplicationId</code> and the queue doesn't have <code>ContentBasedDeduplication</code> set, the action fails with an error.</p></li>
/// <li>
/// <p>If the queue has <code>ContentBasedDeduplication</code> set, your <code>MessageDeduplicationId</code> overrides the generated one.</p></li>
/// </ul></li>
/// <li>
/// <p>When <code>ContentBasedDeduplication</code> is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.</p></li>
/// <li>
/// <p>If you send one message with <code>ContentBasedDeduplication</code> enabled and then another message with a <code>MessageDeduplicationId</code> that is the same as the one generated for the first <code>MessageDeduplicationId</code>, the two messages are treated as duplicates and only one copy of the message is delivered.</p></li>
/// </ul></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html">high throughput for FIFO queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>DeduplicationScope</code> – Specifies whether message deduplication occurs at the message group or queue level. Valid values are <code>messageGroup</code> and <code>queue</code>.</p></li>
/// <li>
/// <p><code>FifoThroughputLimit</code> – Specifies whether the FIFO queue throughput quota applies to the entire queue or per message group. Valid values are <code>perQueue</code> and <code>perMessageGroupId</code>. The <code>perMessageGroupId</code> value is allowed only when the value for <code>DeduplicationScope</code> is <code>messageGroup</code>.</p></li>
/// </ul>
/// <p>To enable high throughput for FIFO queues, do the following:</p>
/// <ul>
/// <li>
/// <p>Set <code>DeduplicationScope</code> to <code>messageGroup</code>.</p></li>
/// <li>
/// <p>Set <code>FifoThroughputLimit</code> to <code>perMessageGroupId</code>.</p></li>
/// </ul>
/// <p>If you set these attributes to anything other than the values shown for enabling high throughput, normal throughput is in effect and deduplication occurs as specified.</p>
/// <p>For information on throughput quotas, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html">Quotas related to messages</a> in the <i>Amazon SQS Developer Guide</i>.</p>
pub attributes: ::std::option::Option<::std::collections::HashMap<crate::types::QueueAttributeName, ::std::string::String>>,
}
impl SetQueueAttributesInput {
/// <p>The URL of the Amazon SQS queue whose attributes are set.</p>
/// <p>Queue URLs and names are case-sensitive.</p>
pub fn queue_url(&self) -> ::std::option::Option<&str> {
self.queue_url.as_deref()
}
/// <p>A map of attributes to set.</p>
/// <p>The following lists the names, descriptions, and values of the special request parameters that the <code>SetQueueAttributes</code> action uses:</p>
/// <ul>
/// <li>
/// <p><code>DelaySeconds</code> – The length of time, in seconds, for which the delivery of all messages in the queue is delayed. Valid values: An integer from 0 to 900 (15 minutes). Default: 0.</p></li>
/// <li>
/// <p><code>MaximumMessageSize</code> – The limit of how many bytes a message can contain before Amazon SQS rejects it. Valid values: An integer from 1,024 bytes (1 KiB) up to 1,048,576 bytes (1 MiB). Default: 1,048,576 bytes (1 MiB).</p></li>
/// <li>
/// <p><code>MessageRetentionPeriod</code> – The length of time, in seconds, for which Amazon SQS retains a message. Valid values: An integer representing seconds, from 60 (1 minute) to 1,209,600 (14 days). Default: 345,600 (4 days). When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the <code>MessageRetentionPeriod</code> attribute can take up to 15 minutes and will impact existing messages in the queue potentially causing them to be expired and deleted if the <code>MessageRetentionPeriod</code> is reduced below the age of existing messages.</p></li>
/// <li>
/// <p><code>Policy</code> – The queue's policy. A valid Amazon Web Services policy. For more information about policy structure, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/PoliciesOverview.html">Overview of Amazon Web Services IAM Policies</a> in the <i>Identity and Access Management User Guide</i>.</p></li>
/// <li>
/// <p><code>ReceiveMessageWaitTimeSeconds</code> – The length of time, in seconds, for which a <code> <code>ReceiveMessage</code> </code> action waits for a message to arrive. Valid values: An integer from 0 to 20 (seconds). Default: 0.</p></li>
/// <li>
/// <p><code>VisibilityTimeout</code> – The visibility timeout for the queue, in seconds. Valid values: An integer from 0 to 43,200 (12 hours). Default: 30. For more information about the visibility timeout, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html">Visibility Timeout</a> in the <i>Amazon SQS Developer Guide</i>.</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">dead-letter queues:</a></p>
/// <ul>
/// <li>
/// <p><code>RedrivePolicy</code> – The string that includes the parameters for the dead-letter queue functionality of the source queue as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>deadLetterTargetArn</code> – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of <code>maxReceiveCount</code> is exceeded.</p></li>
/// <li>
/// <p><code>maxReceiveCount</code> – The number of times a message is delivered to the source queue before being moved to the dead-letter queue. Default: 10. When the <code>ReceiveCount</code> for a message exceeds the <code>maxReceiveCount</code> for a queue, Amazon SQS moves the message to the dead-letter-queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>RedriveAllowPolicy</code> – The string that includes the parameters for the permissions for the dead-letter queue redrive permission and which source queues can specify dead-letter queues as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>redrivePermission</code> – The permission type that defines which source queues can specify the current queue as the dead-letter queue. Valid values are:</p>
/// <ul>
/// <li>
/// <p><code>allowAll</code> – (Default) Any source queues in this Amazon Web Services account in the same Region can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>denyAll</code> – No source queues can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>byQueue</code> – Only queues specified by the <code>sourceQueueArns</code> parameter can specify this queue as the dead-letter queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>sourceQueueArns</code> – The Amazon Resource Names (ARN)s of the source queues that can specify this queue as the dead-letter queue and redrive messages. You can specify this parameter only when the <code>redrivePermission</code> parameter is set to <code>byQueue</code>. You can specify up to 10 source queue ARNs. To allow more than 10 source queues to specify dead-letter queues, set the <code>redrivePermission</code> parameter to <code>allowAll</code>.</p></li>
/// </ul></li>
/// </ul><note>
/// <p>The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.</p>
/// </note>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html">server-side-encryption</a>:</p>
/// <ul>
/// <li>
/// <p><code>KmsMasterKeyId</code> – The ID of an Amazon Web Services managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-sse-key-terms">Key Terms</a>. While the alias of the AWS-managed CMK for Amazon SQS is always <code>alias/aws/sqs</code>, the alias of a custom CMK can, for example, be <code>alias/<i>MyAlias</i> </code>. For more examples, see <a href="https://docs.aws.amazon.com/kms/latest/APIReference/API_DescribeKey.html#API_DescribeKey_RequestParameters">KeyId</a> in the <i>Key Management Service API Reference</i>.</p></li>
/// <li>
/// <p><code>KmsDataKeyReusePeriodSeconds</code> – The length of time, in seconds, for which Amazon SQS can reuse a <a href="https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#data-keys">data key</a> to encrypt or decrypt messages before calling KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes). A shorter time period provides better security but results in more calls to KMS which might incur charges after Free Tier. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work">How Does the Data Key Reuse Period Work?</a>.</p></li>
/// <li>
/// <p><code>SqsManagedSseEnabled</code> – Enables server-side queue encryption using SQS owned encryption keys. Only one server-side encryption option is supported per queue (for example, <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sse-existing-queue.html">SSE-KMS</a> or <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sqs-sse-queue.html">SSE-SQS</a>).</p></li>
/// </ul>
/// <p>The following attribute applies only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO (first-in-first-out) queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>ContentBasedDeduplication</code> – Enables content-based deduplication. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-exactly-once-processing.html">Exactly-once processing</a> in the <i>Amazon SQS Developer Guide</i>. Note the following:</p>
/// <ul>
/// <li>
/// <p>Every message must have a unique <code>MessageDeduplicationId</code>.</p>
/// <ul>
/// <li>
/// <p>You may provide a <code>MessageDeduplicationId</code> explicitly.</p></li>
/// <li>
/// <p>If you aren't able to provide a <code>MessageDeduplicationId</code> and you enable <code>ContentBasedDeduplication</code> for your queue, Amazon SQS uses a SHA-256 hash to generate the <code>MessageDeduplicationId</code> using the body of the message (but not the attributes of the message).</p></li>
/// <li>
/// <p>If you don't provide a <code>MessageDeduplicationId</code> and the queue doesn't have <code>ContentBasedDeduplication</code> set, the action fails with an error.</p></li>
/// <li>
/// <p>If the queue has <code>ContentBasedDeduplication</code> set, your <code>MessageDeduplicationId</code> overrides the generated one.</p></li>
/// </ul></li>
/// <li>
/// <p>When <code>ContentBasedDeduplication</code> is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.</p></li>
/// <li>
/// <p>If you send one message with <code>ContentBasedDeduplication</code> enabled and then another message with a <code>MessageDeduplicationId</code> that is the same as the one generated for the first <code>MessageDeduplicationId</code>, the two messages are treated as duplicates and only one copy of the message is delivered.</p></li>
/// </ul></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html">high throughput for FIFO queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>DeduplicationScope</code> – Specifies whether message deduplication occurs at the message group or queue level. Valid values are <code>messageGroup</code> and <code>queue</code>.</p></li>
/// <li>
/// <p><code>FifoThroughputLimit</code> – Specifies whether the FIFO queue throughput quota applies to the entire queue or per message group. Valid values are <code>perQueue</code> and <code>perMessageGroupId</code>. The <code>perMessageGroupId</code> value is allowed only when the value for <code>DeduplicationScope</code> is <code>messageGroup</code>.</p></li>
/// </ul>
/// <p>To enable high throughput for FIFO queues, do the following:</p>
/// <ul>
/// <li>
/// <p>Set <code>DeduplicationScope</code> to <code>messageGroup</code>.</p></li>
/// <li>
/// <p>Set <code>FifoThroughputLimit</code> to <code>perMessageGroupId</code>.</p></li>
/// </ul>
/// <p>If you set these attributes to anything other than the values shown for enabling high throughput, normal throughput is in effect and deduplication occurs as specified.</p>
/// <p>For information on throughput quotas, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html">Quotas related to messages</a> in the <i>Amazon SQS Developer Guide</i>.</p>
pub fn attributes(&self) -> ::std::option::Option<&::std::collections::HashMap<crate::types::QueueAttributeName, ::std::string::String>> {
self.attributes.as_ref()
}
}
impl SetQueueAttributesInput {
/// Creates a new builder-style object to manufacture [`SetQueueAttributesInput`](crate::operation::set_queue_attributes::SetQueueAttributesInput).
pub fn builder() -> crate::operation::set_queue_attributes::builders::SetQueueAttributesInputBuilder {
crate::operation::set_queue_attributes::builders::SetQueueAttributesInputBuilder::default()
}
}
/// A builder for [`SetQueueAttributesInput`](crate::operation::set_queue_attributes::SetQueueAttributesInput).
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::default::Default, ::std::fmt::Debug)]
#[non_exhaustive]
pub struct SetQueueAttributesInputBuilder {
pub(crate) queue_url: ::std::option::Option<::std::string::String>,
pub(crate) attributes: ::std::option::Option<::std::collections::HashMap<crate::types::QueueAttributeName, ::std::string::String>>,
}
impl SetQueueAttributesInputBuilder {
/// <p>The URL of the Amazon SQS queue whose attributes are set.</p>
/// <p>Queue URLs and names are case-sensitive.</p>
/// This field is required.
pub fn queue_url(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.queue_url = ::std::option::Option::Some(input.into());
self
}
/// <p>The URL of the Amazon SQS queue whose attributes are set.</p>
/// <p>Queue URLs and names are case-sensitive.</p>
pub fn set_queue_url(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.queue_url = input;
self
}
/// <p>The URL of the Amazon SQS queue whose attributes are set.</p>
/// <p>Queue URLs and names are case-sensitive.</p>
pub fn get_queue_url(&self) -> &::std::option::Option<::std::string::String> {
&self.queue_url
}
/// Adds a key-value pair to `attributes`.
///
/// To override the contents of this collection use [`set_attributes`](Self::set_attributes).
///
/// <p>A map of attributes to set.</p>
/// <p>The following lists the names, descriptions, and values of the special request parameters that the <code>SetQueueAttributes</code> action uses:</p>
/// <ul>
/// <li>
/// <p><code>DelaySeconds</code> – The length of time, in seconds, for which the delivery of all messages in the queue is delayed. Valid values: An integer from 0 to 900 (15 minutes). Default: 0.</p></li>
/// <li>
/// <p><code>MaximumMessageSize</code> – The limit of how many bytes a message can contain before Amazon SQS rejects it. Valid values: An integer from 1,024 bytes (1 KiB) up to 1,048,576 bytes (1 MiB). Default: 1,048,576 bytes (1 MiB).</p></li>
/// <li>
/// <p><code>MessageRetentionPeriod</code> – The length of time, in seconds, for which Amazon SQS retains a message. Valid values: An integer representing seconds, from 60 (1 minute) to 1,209,600 (14 days). Default: 345,600 (4 days). When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the <code>MessageRetentionPeriod</code> attribute can take up to 15 minutes and will impact existing messages in the queue potentially causing them to be expired and deleted if the <code>MessageRetentionPeriod</code> is reduced below the age of existing messages.</p></li>
/// <li>
/// <p><code>Policy</code> – The queue's policy. A valid Amazon Web Services policy. For more information about policy structure, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/PoliciesOverview.html">Overview of Amazon Web Services IAM Policies</a> in the <i>Identity and Access Management User Guide</i>.</p></li>
/// <li>
/// <p><code>ReceiveMessageWaitTimeSeconds</code> – The length of time, in seconds, for which a <code> <code>ReceiveMessage</code> </code> action waits for a message to arrive. Valid values: An integer from 0 to 20 (seconds). Default: 0.</p></li>
/// <li>
/// <p><code>VisibilityTimeout</code> – The visibility timeout for the queue, in seconds. Valid values: An integer from 0 to 43,200 (12 hours). Default: 30. For more information about the visibility timeout, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html">Visibility Timeout</a> in the <i>Amazon SQS Developer Guide</i>.</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">dead-letter queues:</a></p>
/// <ul>
/// <li>
/// <p><code>RedrivePolicy</code> – The string that includes the parameters for the dead-letter queue functionality of the source queue as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>deadLetterTargetArn</code> – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of <code>maxReceiveCount</code> is exceeded.</p></li>
/// <li>
/// <p><code>maxReceiveCount</code> – The number of times a message is delivered to the source queue before being moved to the dead-letter queue. Default: 10. When the <code>ReceiveCount</code> for a message exceeds the <code>maxReceiveCount</code> for a queue, Amazon SQS moves the message to the dead-letter-queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>RedriveAllowPolicy</code> – The string that includes the parameters for the permissions for the dead-letter queue redrive permission and which source queues can specify dead-letter queues as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>redrivePermission</code> – The permission type that defines which source queues can specify the current queue as the dead-letter queue. Valid values are:</p>
/// <ul>
/// <li>
/// <p><code>allowAll</code> – (Default) Any source queues in this Amazon Web Services account in the same Region can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>denyAll</code> – No source queues can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>byQueue</code> – Only queues specified by the <code>sourceQueueArns</code> parameter can specify this queue as the dead-letter queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>sourceQueueArns</code> – The Amazon Resource Names (ARN)s of the source queues that can specify this queue as the dead-letter queue and redrive messages. You can specify this parameter only when the <code>redrivePermission</code> parameter is set to <code>byQueue</code>. You can specify up to 10 source queue ARNs. To allow more than 10 source queues to specify dead-letter queues, set the <code>redrivePermission</code> parameter to <code>allowAll</code>.</p></li>
/// </ul></li>
/// </ul><note>
/// <p>The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.</p>
/// </note>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html">server-side-encryption</a>:</p>
/// <ul>
/// <li>
/// <p><code>KmsMasterKeyId</code> – The ID of an Amazon Web Services managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-sse-key-terms">Key Terms</a>. While the alias of the AWS-managed CMK for Amazon SQS is always <code>alias/aws/sqs</code>, the alias of a custom CMK can, for example, be <code>alias/<i>MyAlias</i> </code>. For more examples, see <a href="https://docs.aws.amazon.com/kms/latest/APIReference/API_DescribeKey.html#API_DescribeKey_RequestParameters">KeyId</a> in the <i>Key Management Service API Reference</i>.</p></li>
/// <li>
/// <p><code>KmsDataKeyReusePeriodSeconds</code> – The length of time, in seconds, for which Amazon SQS can reuse a <a href="https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#data-keys">data key</a> to encrypt or decrypt messages before calling KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes). A shorter time period provides better security but results in more calls to KMS which might incur charges after Free Tier. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work">How Does the Data Key Reuse Period Work?</a>.</p></li>
/// <li>
/// <p><code>SqsManagedSseEnabled</code> – Enables server-side queue encryption using SQS owned encryption keys. Only one server-side encryption option is supported per queue (for example, <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sse-existing-queue.html">SSE-KMS</a> or <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sqs-sse-queue.html">SSE-SQS</a>).</p></li>
/// </ul>
/// <p>The following attribute applies only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO (first-in-first-out) queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>ContentBasedDeduplication</code> – Enables content-based deduplication. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-exactly-once-processing.html">Exactly-once processing</a> in the <i>Amazon SQS Developer Guide</i>. Note the following:</p>
/// <ul>
/// <li>
/// <p>Every message must have a unique <code>MessageDeduplicationId</code>.</p>
/// <ul>
/// <li>
/// <p>You may provide a <code>MessageDeduplicationId</code> explicitly.</p></li>
/// <li>
/// <p>If you aren't able to provide a <code>MessageDeduplicationId</code> and you enable <code>ContentBasedDeduplication</code> for your queue, Amazon SQS uses a SHA-256 hash to generate the <code>MessageDeduplicationId</code> using the body of the message (but not the attributes of the message).</p></li>
/// <li>
/// <p>If you don't provide a <code>MessageDeduplicationId</code> and the queue doesn't have <code>ContentBasedDeduplication</code> set, the action fails with an error.</p></li>
/// <li>
/// <p>If the queue has <code>ContentBasedDeduplication</code> set, your <code>MessageDeduplicationId</code> overrides the generated one.</p></li>
/// </ul></li>
/// <li>
/// <p>When <code>ContentBasedDeduplication</code> is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.</p></li>
/// <li>
/// <p>If you send one message with <code>ContentBasedDeduplication</code> enabled and then another message with a <code>MessageDeduplicationId</code> that is the same as the one generated for the first <code>MessageDeduplicationId</code>, the two messages are treated as duplicates and only one copy of the message is delivered.</p></li>
/// </ul></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html">high throughput for FIFO queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>DeduplicationScope</code> – Specifies whether message deduplication occurs at the message group or queue level. Valid values are <code>messageGroup</code> and <code>queue</code>.</p></li>
/// <li>
/// <p><code>FifoThroughputLimit</code> – Specifies whether the FIFO queue throughput quota applies to the entire queue or per message group. Valid values are <code>perQueue</code> and <code>perMessageGroupId</code>. The <code>perMessageGroupId</code> value is allowed only when the value for <code>DeduplicationScope</code> is <code>messageGroup</code>.</p></li>
/// </ul>
/// <p>To enable high throughput for FIFO queues, do the following:</p>
/// <ul>
/// <li>
/// <p>Set <code>DeduplicationScope</code> to <code>messageGroup</code>.</p></li>
/// <li>
/// <p>Set <code>FifoThroughputLimit</code> to <code>perMessageGroupId</code>.</p></li>
/// </ul>
/// <p>If you set these attributes to anything other than the values shown for enabling high throughput, normal throughput is in effect and deduplication occurs as specified.</p>
/// <p>For information on throughput quotas, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html">Quotas related to messages</a> in the <i>Amazon SQS Developer Guide</i>.</p>
pub fn attributes(mut self, k: crate::types::QueueAttributeName, v: impl ::std::convert::Into<::std::string::String>) -> Self {
let mut hash_map = self.attributes.unwrap_or_default();
hash_map.insert(k, v.into());
self.attributes = ::std::option::Option::Some(hash_map);
self
}
/// <p>A map of attributes to set.</p>
/// <p>The following lists the names, descriptions, and values of the special request parameters that the <code>SetQueueAttributes</code> action uses:</p>
/// <ul>
/// <li>
/// <p><code>DelaySeconds</code> – The length of time, in seconds, for which the delivery of all messages in the queue is delayed. Valid values: An integer from 0 to 900 (15 minutes). Default: 0.</p></li>
/// <li>
/// <p><code>MaximumMessageSize</code> – The limit of how many bytes a message can contain before Amazon SQS rejects it. Valid values: An integer from 1,024 bytes (1 KiB) up to 1,048,576 bytes (1 MiB). Default: 1,048,576 bytes (1 MiB).</p></li>
/// <li>
/// <p><code>MessageRetentionPeriod</code> – The length of time, in seconds, for which Amazon SQS retains a message. Valid values: An integer representing seconds, from 60 (1 minute) to 1,209,600 (14 days). Default: 345,600 (4 days). When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the <code>MessageRetentionPeriod</code> attribute can take up to 15 minutes and will impact existing messages in the queue potentially causing them to be expired and deleted if the <code>MessageRetentionPeriod</code> is reduced below the age of existing messages.</p></li>
/// <li>
/// <p><code>Policy</code> – The queue's policy. A valid Amazon Web Services policy. For more information about policy structure, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/PoliciesOverview.html">Overview of Amazon Web Services IAM Policies</a> in the <i>Identity and Access Management User Guide</i>.</p></li>
/// <li>
/// <p><code>ReceiveMessageWaitTimeSeconds</code> – The length of time, in seconds, for which a <code> <code>ReceiveMessage</code> </code> action waits for a message to arrive. Valid values: An integer from 0 to 20 (seconds). Default: 0.</p></li>
/// <li>
/// <p><code>VisibilityTimeout</code> – The visibility timeout for the queue, in seconds. Valid values: An integer from 0 to 43,200 (12 hours). Default: 30. For more information about the visibility timeout, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html">Visibility Timeout</a> in the <i>Amazon SQS Developer Guide</i>.</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">dead-letter queues:</a></p>
/// <ul>
/// <li>
/// <p><code>RedrivePolicy</code> – The string that includes the parameters for the dead-letter queue functionality of the source queue as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>deadLetterTargetArn</code> – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of <code>maxReceiveCount</code> is exceeded.</p></li>
/// <li>
/// <p><code>maxReceiveCount</code> – The number of times a message is delivered to the source queue before being moved to the dead-letter queue. Default: 10. When the <code>ReceiveCount</code> for a message exceeds the <code>maxReceiveCount</code> for a queue, Amazon SQS moves the message to the dead-letter-queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>RedriveAllowPolicy</code> – The string that includes the parameters for the permissions for the dead-letter queue redrive permission and which source queues can specify dead-letter queues as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>redrivePermission</code> – The permission type that defines which source queues can specify the current queue as the dead-letter queue. Valid values are:</p>
/// <ul>
/// <li>
/// <p><code>allowAll</code> – (Default) Any source queues in this Amazon Web Services account in the same Region can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>denyAll</code> – No source queues can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>byQueue</code> – Only queues specified by the <code>sourceQueueArns</code> parameter can specify this queue as the dead-letter queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>sourceQueueArns</code> – The Amazon Resource Names (ARN)s of the source queues that can specify this queue as the dead-letter queue and redrive messages. You can specify this parameter only when the <code>redrivePermission</code> parameter is set to <code>byQueue</code>. You can specify up to 10 source queue ARNs. To allow more than 10 source queues to specify dead-letter queues, set the <code>redrivePermission</code> parameter to <code>allowAll</code>.</p></li>
/// </ul></li>
/// </ul><note>
/// <p>The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.</p>
/// </note>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html">server-side-encryption</a>:</p>
/// <ul>
/// <li>
/// <p><code>KmsMasterKeyId</code> – The ID of an Amazon Web Services managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-sse-key-terms">Key Terms</a>. While the alias of the AWS-managed CMK for Amazon SQS is always <code>alias/aws/sqs</code>, the alias of a custom CMK can, for example, be <code>alias/<i>MyAlias</i> </code>. For more examples, see <a href="https://docs.aws.amazon.com/kms/latest/APIReference/API_DescribeKey.html#API_DescribeKey_RequestParameters">KeyId</a> in the <i>Key Management Service API Reference</i>.</p></li>
/// <li>
/// <p><code>KmsDataKeyReusePeriodSeconds</code> – The length of time, in seconds, for which Amazon SQS can reuse a <a href="https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#data-keys">data key</a> to encrypt or decrypt messages before calling KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes). A shorter time period provides better security but results in more calls to KMS which might incur charges after Free Tier. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work">How Does the Data Key Reuse Period Work?</a>.</p></li>
/// <li>
/// <p><code>SqsManagedSseEnabled</code> – Enables server-side queue encryption using SQS owned encryption keys. Only one server-side encryption option is supported per queue (for example, <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sse-existing-queue.html">SSE-KMS</a> or <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sqs-sse-queue.html">SSE-SQS</a>).</p></li>
/// </ul>
/// <p>The following attribute applies only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO (first-in-first-out) queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>ContentBasedDeduplication</code> – Enables content-based deduplication. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-exactly-once-processing.html">Exactly-once processing</a> in the <i>Amazon SQS Developer Guide</i>. Note the following:</p>
/// <ul>
/// <li>
/// <p>Every message must have a unique <code>MessageDeduplicationId</code>.</p>
/// <ul>
/// <li>
/// <p>You may provide a <code>MessageDeduplicationId</code> explicitly.</p></li>
/// <li>
/// <p>If you aren't able to provide a <code>MessageDeduplicationId</code> and you enable <code>ContentBasedDeduplication</code> for your queue, Amazon SQS uses a SHA-256 hash to generate the <code>MessageDeduplicationId</code> using the body of the message (but not the attributes of the message).</p></li>
/// <li>
/// <p>If you don't provide a <code>MessageDeduplicationId</code> and the queue doesn't have <code>ContentBasedDeduplication</code> set, the action fails with an error.</p></li>
/// <li>
/// <p>If the queue has <code>ContentBasedDeduplication</code> set, your <code>MessageDeduplicationId</code> overrides the generated one.</p></li>
/// </ul></li>
/// <li>
/// <p>When <code>ContentBasedDeduplication</code> is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.</p></li>
/// <li>
/// <p>If you send one message with <code>ContentBasedDeduplication</code> enabled and then another message with a <code>MessageDeduplicationId</code> that is the same as the one generated for the first <code>MessageDeduplicationId</code>, the two messages are treated as duplicates and only one copy of the message is delivered.</p></li>
/// </ul></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html">high throughput for FIFO queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>DeduplicationScope</code> – Specifies whether message deduplication occurs at the message group or queue level. Valid values are <code>messageGroup</code> and <code>queue</code>.</p></li>
/// <li>
/// <p><code>FifoThroughputLimit</code> – Specifies whether the FIFO queue throughput quota applies to the entire queue or per message group. Valid values are <code>perQueue</code> and <code>perMessageGroupId</code>. The <code>perMessageGroupId</code> value is allowed only when the value for <code>DeduplicationScope</code> is <code>messageGroup</code>.</p></li>
/// </ul>
/// <p>To enable high throughput for FIFO queues, do the following:</p>
/// <ul>
/// <li>
/// <p>Set <code>DeduplicationScope</code> to <code>messageGroup</code>.</p></li>
/// <li>
/// <p>Set <code>FifoThroughputLimit</code> to <code>perMessageGroupId</code>.</p></li>
/// </ul>
/// <p>If you set these attributes to anything other than the values shown for enabling high throughput, normal throughput is in effect and deduplication occurs as specified.</p>
/// <p>For information on throughput quotas, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html">Quotas related to messages</a> in the <i>Amazon SQS Developer Guide</i>.</p>
pub fn set_attributes(
mut self,
input: ::std::option::Option<::std::collections::HashMap<crate::types::QueueAttributeName, ::std::string::String>>,
) -> Self {
self.attributes = input;
self
}
/// <p>A map of attributes to set.</p>
/// <p>The following lists the names, descriptions, and values of the special request parameters that the <code>SetQueueAttributes</code> action uses:</p>
/// <ul>
/// <li>
/// <p><code>DelaySeconds</code> – The length of time, in seconds, for which the delivery of all messages in the queue is delayed. Valid values: An integer from 0 to 900 (15 minutes). Default: 0.</p></li>
/// <li>
/// <p><code>MaximumMessageSize</code> – The limit of how many bytes a message can contain before Amazon SQS rejects it. Valid values: An integer from 1,024 bytes (1 KiB) up to 1,048,576 bytes (1 MiB). Default: 1,048,576 bytes (1 MiB).</p></li>
/// <li>
/// <p><code>MessageRetentionPeriod</code> – The length of time, in seconds, for which Amazon SQS retains a message. Valid values: An integer representing seconds, from 60 (1 minute) to 1,209,600 (14 days). Default: 345,600 (4 days). When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the <code>MessageRetentionPeriod</code> attribute can take up to 15 minutes and will impact existing messages in the queue potentially causing them to be expired and deleted if the <code>MessageRetentionPeriod</code> is reduced below the age of existing messages.</p></li>
/// <li>
/// <p><code>Policy</code> – The queue's policy. A valid Amazon Web Services policy. For more information about policy structure, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/PoliciesOverview.html">Overview of Amazon Web Services IAM Policies</a> in the <i>Identity and Access Management User Guide</i>.</p></li>
/// <li>
/// <p><code>ReceiveMessageWaitTimeSeconds</code> – The length of time, in seconds, for which a <code> <code>ReceiveMessage</code> </code> action waits for a message to arrive. Valid values: An integer from 0 to 20 (seconds). Default: 0.</p></li>
/// <li>
/// <p><code>VisibilityTimeout</code> – The visibility timeout for the queue, in seconds. Valid values: An integer from 0 to 43,200 (12 hours). Default: 30. For more information about the visibility timeout, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html">Visibility Timeout</a> in the <i>Amazon SQS Developer Guide</i>.</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">dead-letter queues:</a></p>
/// <ul>
/// <li>
/// <p><code>RedrivePolicy</code> – The string that includes the parameters for the dead-letter queue functionality of the source queue as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>deadLetterTargetArn</code> – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of <code>maxReceiveCount</code> is exceeded.</p></li>
/// <li>
/// <p><code>maxReceiveCount</code> – The number of times a message is delivered to the source queue before being moved to the dead-letter queue. Default: 10. When the <code>ReceiveCount</code> for a message exceeds the <code>maxReceiveCount</code> for a queue, Amazon SQS moves the message to the dead-letter-queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>RedriveAllowPolicy</code> – The string that includes the parameters for the permissions for the dead-letter queue redrive permission and which source queues can specify dead-letter queues as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>redrivePermission</code> – The permission type that defines which source queues can specify the current queue as the dead-letter queue. Valid values are:</p>
/// <ul>
/// <li>
/// <p><code>allowAll</code> – (Default) Any source queues in this Amazon Web Services account in the same Region can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>denyAll</code> – No source queues can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>byQueue</code> – Only queues specified by the <code>sourceQueueArns</code> parameter can specify this queue as the dead-letter queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>sourceQueueArns</code> – The Amazon Resource Names (ARN)s of the source queues that can specify this queue as the dead-letter queue and redrive messages. You can specify this parameter only when the <code>redrivePermission</code> parameter is set to <code>byQueue</code>. You can specify up to 10 source queue ARNs. To allow more than 10 source queues to specify dead-letter queues, set the <code>redrivePermission</code> parameter to <code>allowAll</code>.</p></li>
/// </ul></li>
/// </ul><note>
/// <p>The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.</p>
/// </note>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html">server-side-encryption</a>:</p>
/// <ul>
/// <li>
/// <p><code>KmsMasterKeyId</code> – The ID of an Amazon Web Services managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-sse-key-terms">Key Terms</a>. While the alias of the AWS-managed CMK for Amazon SQS is always <code>alias/aws/sqs</code>, the alias of a custom CMK can, for example, be <code>alias/<i>MyAlias</i> </code>. For more examples, see <a href="https://docs.aws.amazon.com/kms/latest/APIReference/API_DescribeKey.html#API_DescribeKey_RequestParameters">KeyId</a> in the <i>Key Management Service API Reference</i>.</p></li>
/// <li>
/// <p><code>KmsDataKeyReusePeriodSeconds</code> – The length of time, in seconds, for which Amazon SQS can reuse a <a href="https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#data-keys">data key</a> to encrypt or decrypt messages before calling KMS again. An integer representing seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300 (5 minutes). A shorter time period provides better security but results in more calls to KMS which might incur charges after Free Tier. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work">How Does the Data Key Reuse Period Work?</a>.</p></li>
/// <li>
/// <p><code>SqsManagedSseEnabled</code> – Enables server-side queue encryption using SQS owned encryption keys. Only one server-side encryption option is supported per queue (for example, <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sse-existing-queue.html">SSE-KMS</a> or <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sqs-sse-queue.html">SSE-SQS</a>).</p></li>
/// </ul>
/// <p>The following attribute applies only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO (first-in-first-out) queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>ContentBasedDeduplication</code> – Enables content-based deduplication. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-exactly-once-processing.html">Exactly-once processing</a> in the <i>Amazon SQS Developer Guide</i>. Note the following:</p>
/// <ul>
/// <li>
/// <p>Every message must have a unique <code>MessageDeduplicationId</code>.</p>
/// <ul>
/// <li>
/// <p>You may provide a <code>MessageDeduplicationId</code> explicitly.</p></li>
/// <li>
/// <p>If you aren't able to provide a <code>MessageDeduplicationId</code> and you enable <code>ContentBasedDeduplication</code> for your queue, Amazon SQS uses a SHA-256 hash to generate the <code>MessageDeduplicationId</code> using the body of the message (but not the attributes of the message).</p></li>
/// <li>
/// <p>If you don't provide a <code>MessageDeduplicationId</code> and the queue doesn't have <code>ContentBasedDeduplication</code> set, the action fails with an error.</p></li>
/// <li>
/// <p>If the queue has <code>ContentBasedDeduplication</code> set, your <code>MessageDeduplicationId</code> overrides the generated one.</p></li>
/// </ul></li>
/// <li>
/// <p>When <code>ContentBasedDeduplication</code> is in effect, messages with identical content sent within the deduplication interval are treated as duplicates and only one copy of the message is delivered.</p></li>
/// <li>
/// <p>If you send one message with <code>ContentBasedDeduplication</code> enabled and then another message with a <code>MessageDeduplicationId</code> that is the same as the one generated for the first <code>MessageDeduplicationId</code>, the two messages are treated as duplicates and only one copy of the message is delivered.</p></li>
/// </ul></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html">high throughput for FIFO queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>DeduplicationScope</code> – Specifies whether message deduplication occurs at the message group or queue level. Valid values are <code>messageGroup</code> and <code>queue</code>.</p></li>
/// <li>
/// <p><code>FifoThroughputLimit</code> – Specifies whether the FIFO queue throughput quota applies to the entire queue or per message group. Valid values are <code>perQueue</code> and <code>perMessageGroupId</code>. The <code>perMessageGroupId</code> value is allowed only when the value for <code>DeduplicationScope</code> is <code>messageGroup</code>.</p></li>
/// </ul>
/// <p>To enable high throughput for FIFO queues, do the following:</p>
/// <ul>
/// <li>
/// <p>Set <code>DeduplicationScope</code> to <code>messageGroup</code>.</p></li>
/// <li>
/// <p>Set <code>FifoThroughputLimit</code> to <code>perMessageGroupId</code>.</p></li>
/// </ul>
/// <p>If you set these attributes to anything other than the values shown for enabling high throughput, normal throughput is in effect and deduplication occurs as specified.</p>
/// <p>For information on throughput quotas, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html">Quotas related to messages</a> in the <i>Amazon SQS Developer Guide</i>.</p>
pub fn get_attributes(&self) -> &::std::option::Option<::std::collections::HashMap<crate::types::QueueAttributeName, ::std::string::String>> {
&self.attributes
}
/// Consumes the builder and constructs a [`SetQueueAttributesInput`](crate::operation::set_queue_attributes::SetQueueAttributesInput).
pub fn build(
self,
) -> ::std::result::Result<crate::operation::set_queue_attributes::SetQueueAttributesInput, ::aws_smithy_types::error::operation::BuildError>
{
::std::result::Result::Ok(crate::operation::set_queue_attributes::SetQueueAttributesInput {
queue_url: self.queue_url,
attributes: self.attributes,
})
}
}