// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
/// <p></p>
#[non_exhaustive]
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::fmt::Debug)]
pub struct GetQueueAttributesInput {
/// <p>The URL of the Amazon SQS queue whose attribute information is retrieved.</p>
/// <p>Queue URLs and names are case-sensitive.</p>
pub queue_url: ::std::option::Option<::std::string::String>,
/// <p>A list of attributes for which to retrieve information.</p>
/// <p>The <code>AttributeNames</code> parameter is optional, but if you don't specify values for this parameter, the request returns empty results.</p><note>
/// <p>In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.</p>
/// </note>
/// <p>The following attributes are supported:</p><important>
/// <p>The <code>ApproximateNumberOfMessagesDelayed</code>, <code>ApproximateNumberOfMessagesNotVisible</code>, and <code>ApproximateNumberOfMessages</code> metrics may not achieve consistency until at least 1 minute after the producers stop sending messages. This period is required for the queue metadata to reach eventual consistency.</p>
/// </important>
/// <ul>
/// <li>
/// <p><code>All</code> – Returns all values.</p></li>
/// <li>
/// <p><code>ApproximateNumberOfMessages</code> – Returns the approximate number of messages available for retrieval from the queue.</p></li>
/// <li>
/// <p><code>ApproximateNumberOfMessagesDelayed</code> – Returns the approximate number of messages in the queue that are delayed and not available for reading immediately. This can happen when the queue is configured as a delay queue or when a message has been sent with a delay parameter.</p></li>
/// <li>
/// <p><code>ApproximateNumberOfMessagesNotVisible</code> – Returns the approximate number of messages that are in flight. Messages are considered to be <i>in flight</i> if they have been sent to a client but have not yet been deleted or have not yet reached the end of their visibility window.</p></li>
/// <li>
/// <p><code>CreatedTimestamp</code> – Returns the time when the queue was created in seconds (<a href="http://en.wikipedia.org/wiki/Unix_time">epoch time</a>).</p></li>
/// <li>
/// <p><code>DelaySeconds</code> – Returns the default delay on the queue in seconds.</p></li>
/// <li>
/// <p><code>LastModifiedTimestamp</code> – Returns the time when the queue was last changed in seconds (<a href="http://en.wikipedia.org/wiki/Unix_time">epoch time</a>).</p></li>
/// <li>
/// <p><code>MaximumMessageSize</code> – Returns the limit of how many bytes a message can contain before Amazon SQS rejects it.</p></li>
/// <li>
/// <p><code>MessageRetentionPeriod</code> – Returns the length of time, in seconds, for which Amazon SQS retains a message. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the <code>MessageRetentionPeriod</code> attribute can take up to 15 minutes and will impact existing messages in the queue potentially causing them to be expired and deleted if the <code>MessageRetentionPeriod</code> is reduced below the age of existing messages.</p></li>
/// <li>
/// <p><code>Policy</code> – Returns the policy of the queue.</p></li>
/// <li>
/// <p><code>QueueArn</code> – Returns the Amazon resource name (ARN) of the queue.</p></li>
/// <li>
/// <p><code>ReceiveMessageWaitTimeSeconds</code> – Returns the length of time, in seconds, for which the <code>ReceiveMessage</code> action waits for a message to arrive.</p></li>
/// <li>
/// <p><code>VisibilityTimeout</code> – Returns the visibility timeout for the queue. For more information about the visibility timeout, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html">Visibility Timeout</a> in the <i>Amazon SQS Developer Guide</i>.</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">dead-letter queues:</a></p>
/// <ul>
/// <li>
/// <p><code>RedrivePolicy</code> – The string that includes the parameters for the dead-letter queue functionality of the source queue as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>deadLetterTargetArn</code> – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of <code>maxReceiveCount</code> is exceeded.</p></li>
/// <li>
/// <p><code>maxReceiveCount</code> – The number of times a message is delivered to the source queue before being moved to the dead-letter queue. Default: 10. When the <code>ReceiveCount</code> for a message exceeds the <code>maxReceiveCount</code> for a queue, Amazon SQS moves the message to the dead-letter-queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>RedriveAllowPolicy</code> – The string that includes the parameters for the permissions for the dead-letter queue redrive permission and which source queues can specify dead-letter queues as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>redrivePermission</code> – The permission type that defines which source queues can specify the current queue as the dead-letter queue. Valid values are:</p>
/// <ul>
/// <li>
/// <p><code>allowAll</code> – (Default) Any source queues in this Amazon Web Services account in the same Region can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>denyAll</code> – No source queues can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>byQueue</code> – Only queues specified by the <code>sourceQueueArns</code> parameter can specify this queue as the dead-letter queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>sourceQueueArns</code> – The Amazon Resource Names (ARN)s of the source queues that can specify this queue as the dead-letter queue and redrive messages. You can specify this parameter only when the <code>redrivePermission</code> parameter is set to <code>byQueue</code>. You can specify up to 10 source queue ARNs. To allow more than 10 source queues to specify dead-letter queues, set the <code>redrivePermission</code> parameter to <code>allowAll</code>.</p></li>
/// </ul></li>
/// </ul><note>
/// <p>The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.</p>
/// </note>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html">server-side-encryption</a>:</p>
/// <ul>
/// <li>
/// <p><code>KmsMasterKeyId</code> – Returns the ID of an Amazon Web Services managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-sse-key-terms">Key Terms</a>.</p></li>
/// <li>
/// <p><code>KmsDataKeyReusePeriodSeconds</code> – Returns the length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling KMS again. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work">How Does the Data Key Reuse Period Work?</a>.</p></li>
/// <li>
/// <p><code>SqsManagedSseEnabled</code> – Returns information about whether the queue is using SSE-SQS encryption using SQS owned encryption keys. Only one server-side encryption option is supported per queue (for example, <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sse-existing-queue.html">SSE-KMS</a> or <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sqs-sse-queue.html">SSE-SQS</a>).</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO (first-in-first-out) queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>FifoQueue</code> – Returns information about whether the queue is FIFO. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-understanding-logic.html">FIFO queue logic</a> in the <i>Amazon SQS Developer Guide</i>.</p><note>
/// <p>To determine whether a queue is <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO</a>, you can check whether <code>QueueName</code> ends with the <code>.fifo</code> suffix.</p>
/// </note></li>
/// <li>
/// <p><code>ContentBasedDeduplication</code> – Returns whether content-based deduplication is enabled for the queue. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-exactly-once-processing.html">Exactly-once processing</a> in the <i>Amazon SQS Developer Guide</i>.</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html">high throughput for FIFO queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>DeduplicationScope</code> – Specifies whether message deduplication occurs at the message group or queue level. Valid values are <code>messageGroup</code> and <code>queue</code>.</p></li>
/// <li>
/// <p><code>FifoThroughputLimit</code> – Specifies whether the FIFO queue throughput quota applies to the entire queue or per message group. Valid values are <code>perQueue</code> and <code>perMessageGroupId</code>. The <code>perMessageGroupId</code> value is allowed only when the value for <code>DeduplicationScope</code> is <code>messageGroup</code>.</p></li>
/// </ul>
/// <p>To enable high throughput for FIFO queues, do the following:</p>
/// <ul>
/// <li>
/// <p>Set <code>DeduplicationScope</code> to <code>messageGroup</code>.</p></li>
/// <li>
/// <p>Set <code>FifoThroughputLimit</code> to <code>perMessageGroupId</code>.</p></li>
/// </ul>
/// <p>If you set these attributes to anything other than the values shown for enabling high throughput, normal throughput is in effect and deduplication occurs as specified.</p>
/// <p>For information on throughput quotas, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html">Quotas related to messages</a> in the <i>Amazon SQS Developer Guide</i>.</p>
pub attribute_names: ::std::option::Option<::std::vec::Vec<crate::types::QueueAttributeName>>,
}
impl GetQueueAttributesInput {
/// <p>The URL of the Amazon SQS queue whose attribute information is retrieved.</p>
/// <p>Queue URLs and names are case-sensitive.</p>
pub fn queue_url(&self) -> ::std::option::Option<&str> {
self.queue_url.as_deref()
}
/// <p>A list of attributes for which to retrieve information.</p>
/// <p>The <code>AttributeNames</code> parameter is optional, but if you don't specify values for this parameter, the request returns empty results.</p><note>
/// <p>In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.</p>
/// </note>
/// <p>The following attributes are supported:</p><important>
/// <p>The <code>ApproximateNumberOfMessagesDelayed</code>, <code>ApproximateNumberOfMessagesNotVisible</code>, and <code>ApproximateNumberOfMessages</code> metrics may not achieve consistency until at least 1 minute after the producers stop sending messages. This period is required for the queue metadata to reach eventual consistency.</p>
/// </important>
/// <ul>
/// <li>
/// <p><code>All</code> – Returns all values.</p></li>
/// <li>
/// <p><code>ApproximateNumberOfMessages</code> – Returns the approximate number of messages available for retrieval from the queue.</p></li>
/// <li>
/// <p><code>ApproximateNumberOfMessagesDelayed</code> – Returns the approximate number of messages in the queue that are delayed and not available for reading immediately. This can happen when the queue is configured as a delay queue or when a message has been sent with a delay parameter.</p></li>
/// <li>
/// <p><code>ApproximateNumberOfMessagesNotVisible</code> – Returns the approximate number of messages that are in flight. Messages are considered to be <i>in flight</i> if they have been sent to a client but have not yet been deleted or have not yet reached the end of their visibility window.</p></li>
/// <li>
/// <p><code>CreatedTimestamp</code> – Returns the time when the queue was created in seconds (<a href="http://en.wikipedia.org/wiki/Unix_time">epoch time</a>).</p></li>
/// <li>
/// <p><code>DelaySeconds</code> – Returns the default delay on the queue in seconds.</p></li>
/// <li>
/// <p><code>LastModifiedTimestamp</code> – Returns the time when the queue was last changed in seconds (<a href="http://en.wikipedia.org/wiki/Unix_time">epoch time</a>).</p></li>
/// <li>
/// <p><code>MaximumMessageSize</code> – Returns the limit of how many bytes a message can contain before Amazon SQS rejects it.</p></li>
/// <li>
/// <p><code>MessageRetentionPeriod</code> – Returns the length of time, in seconds, for which Amazon SQS retains a message. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the <code>MessageRetentionPeriod</code> attribute can take up to 15 minutes and will impact existing messages in the queue potentially causing them to be expired and deleted if the <code>MessageRetentionPeriod</code> is reduced below the age of existing messages.</p></li>
/// <li>
/// <p><code>Policy</code> – Returns the policy of the queue.</p></li>
/// <li>
/// <p><code>QueueArn</code> – Returns the Amazon resource name (ARN) of the queue.</p></li>
/// <li>
/// <p><code>ReceiveMessageWaitTimeSeconds</code> – Returns the length of time, in seconds, for which the <code>ReceiveMessage</code> action waits for a message to arrive.</p></li>
/// <li>
/// <p><code>VisibilityTimeout</code> – Returns the visibility timeout for the queue. For more information about the visibility timeout, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html">Visibility Timeout</a> in the <i>Amazon SQS Developer Guide</i>.</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">dead-letter queues:</a></p>
/// <ul>
/// <li>
/// <p><code>RedrivePolicy</code> – The string that includes the parameters for the dead-letter queue functionality of the source queue as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>deadLetterTargetArn</code> – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of <code>maxReceiveCount</code> is exceeded.</p></li>
/// <li>
/// <p><code>maxReceiveCount</code> – The number of times a message is delivered to the source queue before being moved to the dead-letter queue. Default: 10. When the <code>ReceiveCount</code> for a message exceeds the <code>maxReceiveCount</code> for a queue, Amazon SQS moves the message to the dead-letter-queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>RedriveAllowPolicy</code> – The string that includes the parameters for the permissions for the dead-letter queue redrive permission and which source queues can specify dead-letter queues as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>redrivePermission</code> – The permission type that defines which source queues can specify the current queue as the dead-letter queue. Valid values are:</p>
/// <ul>
/// <li>
/// <p><code>allowAll</code> – (Default) Any source queues in this Amazon Web Services account in the same Region can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>denyAll</code> – No source queues can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>byQueue</code> – Only queues specified by the <code>sourceQueueArns</code> parameter can specify this queue as the dead-letter queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>sourceQueueArns</code> – The Amazon Resource Names (ARN)s of the source queues that can specify this queue as the dead-letter queue and redrive messages. You can specify this parameter only when the <code>redrivePermission</code> parameter is set to <code>byQueue</code>. You can specify up to 10 source queue ARNs. To allow more than 10 source queues to specify dead-letter queues, set the <code>redrivePermission</code> parameter to <code>allowAll</code>.</p></li>
/// </ul></li>
/// </ul><note>
/// <p>The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.</p>
/// </note>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html">server-side-encryption</a>:</p>
/// <ul>
/// <li>
/// <p><code>KmsMasterKeyId</code> – Returns the ID of an Amazon Web Services managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-sse-key-terms">Key Terms</a>.</p></li>
/// <li>
/// <p><code>KmsDataKeyReusePeriodSeconds</code> – Returns the length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling KMS again. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work">How Does the Data Key Reuse Period Work?</a>.</p></li>
/// <li>
/// <p><code>SqsManagedSseEnabled</code> – Returns information about whether the queue is using SSE-SQS encryption using SQS owned encryption keys. Only one server-side encryption option is supported per queue (for example, <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sse-existing-queue.html">SSE-KMS</a> or <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sqs-sse-queue.html">SSE-SQS</a>).</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO (first-in-first-out) queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>FifoQueue</code> – Returns information about whether the queue is FIFO. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-understanding-logic.html">FIFO queue logic</a> in the <i>Amazon SQS Developer Guide</i>.</p><note>
/// <p>To determine whether a queue is <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO</a>, you can check whether <code>QueueName</code> ends with the <code>.fifo</code> suffix.</p>
/// </note></li>
/// <li>
/// <p><code>ContentBasedDeduplication</code> – Returns whether content-based deduplication is enabled for the queue. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-exactly-once-processing.html">Exactly-once processing</a> in the <i>Amazon SQS Developer Guide</i>.</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html">high throughput for FIFO queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>DeduplicationScope</code> – Specifies whether message deduplication occurs at the message group or queue level. Valid values are <code>messageGroup</code> and <code>queue</code>.</p></li>
/// <li>
/// <p><code>FifoThroughputLimit</code> – Specifies whether the FIFO queue throughput quota applies to the entire queue or per message group. Valid values are <code>perQueue</code> and <code>perMessageGroupId</code>. The <code>perMessageGroupId</code> value is allowed only when the value for <code>DeduplicationScope</code> is <code>messageGroup</code>.</p></li>
/// </ul>
/// <p>To enable high throughput for FIFO queues, do the following:</p>
/// <ul>
/// <li>
/// <p>Set <code>DeduplicationScope</code> to <code>messageGroup</code>.</p></li>
/// <li>
/// <p>Set <code>FifoThroughputLimit</code> to <code>perMessageGroupId</code>.</p></li>
/// </ul>
/// <p>If you set these attributes to anything other than the values shown for enabling high throughput, normal throughput is in effect and deduplication occurs as specified.</p>
/// <p>For information on throughput quotas, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html">Quotas related to messages</a> in the <i>Amazon SQS Developer Guide</i>.</p>
///
/// If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use `.attribute_names.is_none()`.
pub fn attribute_names(&self) -> &[crate::types::QueueAttributeName] {
self.attribute_names.as_deref().unwrap_or_default()
}
}
impl GetQueueAttributesInput {
/// Creates a new builder-style object to manufacture [`GetQueueAttributesInput`](crate::operation::get_queue_attributes::GetQueueAttributesInput).
pub fn builder() -> crate::operation::get_queue_attributes::builders::GetQueueAttributesInputBuilder {
crate::operation::get_queue_attributes::builders::GetQueueAttributesInputBuilder::default()
}
}
/// A builder for [`GetQueueAttributesInput`](crate::operation::get_queue_attributes::GetQueueAttributesInput).
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::default::Default, ::std::fmt::Debug)]
#[non_exhaustive]
pub struct GetQueueAttributesInputBuilder {
pub(crate) queue_url: ::std::option::Option<::std::string::String>,
pub(crate) attribute_names: ::std::option::Option<::std::vec::Vec<crate::types::QueueAttributeName>>,
}
impl GetQueueAttributesInputBuilder {
/// <p>The URL of the Amazon SQS queue whose attribute information is retrieved.</p>
/// <p>Queue URLs and names are case-sensitive.</p>
/// This field is required.
pub fn queue_url(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
self.queue_url = ::std::option::Option::Some(input.into());
self
}
/// <p>The URL of the Amazon SQS queue whose attribute information is retrieved.</p>
/// <p>Queue URLs and names are case-sensitive.</p>
pub fn set_queue_url(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
self.queue_url = input;
self
}
/// <p>The URL of the Amazon SQS queue whose attribute information is retrieved.</p>
/// <p>Queue URLs and names are case-sensitive.</p>
pub fn get_queue_url(&self) -> &::std::option::Option<::std::string::String> {
&self.queue_url
}
/// Appends an item to `attribute_names`.
///
/// To override the contents of this collection use [`set_attribute_names`](Self::set_attribute_names).
///
/// <p>A list of attributes for which to retrieve information.</p>
/// <p>The <code>AttributeNames</code> parameter is optional, but if you don't specify values for this parameter, the request returns empty results.</p><note>
/// <p>In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.</p>
/// </note>
/// <p>The following attributes are supported:</p><important>
/// <p>The <code>ApproximateNumberOfMessagesDelayed</code>, <code>ApproximateNumberOfMessagesNotVisible</code>, and <code>ApproximateNumberOfMessages</code> metrics may not achieve consistency until at least 1 minute after the producers stop sending messages. This period is required for the queue metadata to reach eventual consistency.</p>
/// </important>
/// <ul>
/// <li>
/// <p><code>All</code> – Returns all values.</p></li>
/// <li>
/// <p><code>ApproximateNumberOfMessages</code> – Returns the approximate number of messages available for retrieval from the queue.</p></li>
/// <li>
/// <p><code>ApproximateNumberOfMessagesDelayed</code> – Returns the approximate number of messages in the queue that are delayed and not available for reading immediately. This can happen when the queue is configured as a delay queue or when a message has been sent with a delay parameter.</p></li>
/// <li>
/// <p><code>ApproximateNumberOfMessagesNotVisible</code> – Returns the approximate number of messages that are in flight. Messages are considered to be <i>in flight</i> if they have been sent to a client but have not yet been deleted or have not yet reached the end of their visibility window.</p></li>
/// <li>
/// <p><code>CreatedTimestamp</code> – Returns the time when the queue was created in seconds (<a href="http://en.wikipedia.org/wiki/Unix_time">epoch time</a>).</p></li>
/// <li>
/// <p><code>DelaySeconds</code> – Returns the default delay on the queue in seconds.</p></li>
/// <li>
/// <p><code>LastModifiedTimestamp</code> – Returns the time when the queue was last changed in seconds (<a href="http://en.wikipedia.org/wiki/Unix_time">epoch time</a>).</p></li>
/// <li>
/// <p><code>MaximumMessageSize</code> – Returns the limit of how many bytes a message can contain before Amazon SQS rejects it.</p></li>
/// <li>
/// <p><code>MessageRetentionPeriod</code> – Returns the length of time, in seconds, for which Amazon SQS retains a message. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the <code>MessageRetentionPeriod</code> attribute can take up to 15 minutes and will impact existing messages in the queue potentially causing them to be expired and deleted if the <code>MessageRetentionPeriod</code> is reduced below the age of existing messages.</p></li>
/// <li>
/// <p><code>Policy</code> – Returns the policy of the queue.</p></li>
/// <li>
/// <p><code>QueueArn</code> – Returns the Amazon resource name (ARN) of the queue.</p></li>
/// <li>
/// <p><code>ReceiveMessageWaitTimeSeconds</code> – Returns the length of time, in seconds, for which the <code>ReceiveMessage</code> action waits for a message to arrive.</p></li>
/// <li>
/// <p><code>VisibilityTimeout</code> – Returns the visibility timeout for the queue. For more information about the visibility timeout, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html">Visibility Timeout</a> in the <i>Amazon SQS Developer Guide</i>.</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">dead-letter queues:</a></p>
/// <ul>
/// <li>
/// <p><code>RedrivePolicy</code> – The string that includes the parameters for the dead-letter queue functionality of the source queue as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>deadLetterTargetArn</code> – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of <code>maxReceiveCount</code> is exceeded.</p></li>
/// <li>
/// <p><code>maxReceiveCount</code> – The number of times a message is delivered to the source queue before being moved to the dead-letter queue. Default: 10. When the <code>ReceiveCount</code> for a message exceeds the <code>maxReceiveCount</code> for a queue, Amazon SQS moves the message to the dead-letter-queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>RedriveAllowPolicy</code> – The string that includes the parameters for the permissions for the dead-letter queue redrive permission and which source queues can specify dead-letter queues as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>redrivePermission</code> – The permission type that defines which source queues can specify the current queue as the dead-letter queue. Valid values are:</p>
/// <ul>
/// <li>
/// <p><code>allowAll</code> – (Default) Any source queues in this Amazon Web Services account in the same Region can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>denyAll</code> – No source queues can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>byQueue</code> – Only queues specified by the <code>sourceQueueArns</code> parameter can specify this queue as the dead-letter queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>sourceQueueArns</code> – The Amazon Resource Names (ARN)s of the source queues that can specify this queue as the dead-letter queue and redrive messages. You can specify this parameter only when the <code>redrivePermission</code> parameter is set to <code>byQueue</code>. You can specify up to 10 source queue ARNs. To allow more than 10 source queues to specify dead-letter queues, set the <code>redrivePermission</code> parameter to <code>allowAll</code>.</p></li>
/// </ul></li>
/// </ul><note>
/// <p>The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.</p>
/// </note>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html">server-side-encryption</a>:</p>
/// <ul>
/// <li>
/// <p><code>KmsMasterKeyId</code> – Returns the ID of an Amazon Web Services managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-sse-key-terms">Key Terms</a>.</p></li>
/// <li>
/// <p><code>KmsDataKeyReusePeriodSeconds</code> – Returns the length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling KMS again. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work">How Does the Data Key Reuse Period Work?</a>.</p></li>
/// <li>
/// <p><code>SqsManagedSseEnabled</code> – Returns information about whether the queue is using SSE-SQS encryption using SQS owned encryption keys. Only one server-side encryption option is supported per queue (for example, <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sse-existing-queue.html">SSE-KMS</a> or <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sqs-sse-queue.html">SSE-SQS</a>).</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO (first-in-first-out) queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>FifoQueue</code> – Returns information about whether the queue is FIFO. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-understanding-logic.html">FIFO queue logic</a> in the <i>Amazon SQS Developer Guide</i>.</p><note>
/// <p>To determine whether a queue is <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO</a>, you can check whether <code>QueueName</code> ends with the <code>.fifo</code> suffix.</p>
/// </note></li>
/// <li>
/// <p><code>ContentBasedDeduplication</code> – Returns whether content-based deduplication is enabled for the queue. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-exactly-once-processing.html">Exactly-once processing</a> in the <i>Amazon SQS Developer Guide</i>.</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html">high throughput for FIFO queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>DeduplicationScope</code> – Specifies whether message deduplication occurs at the message group or queue level. Valid values are <code>messageGroup</code> and <code>queue</code>.</p></li>
/// <li>
/// <p><code>FifoThroughputLimit</code> – Specifies whether the FIFO queue throughput quota applies to the entire queue or per message group. Valid values are <code>perQueue</code> and <code>perMessageGroupId</code>. The <code>perMessageGroupId</code> value is allowed only when the value for <code>DeduplicationScope</code> is <code>messageGroup</code>.</p></li>
/// </ul>
/// <p>To enable high throughput for FIFO queues, do the following:</p>
/// <ul>
/// <li>
/// <p>Set <code>DeduplicationScope</code> to <code>messageGroup</code>.</p></li>
/// <li>
/// <p>Set <code>FifoThroughputLimit</code> to <code>perMessageGroupId</code>.</p></li>
/// </ul>
/// <p>If you set these attributes to anything other than the values shown for enabling high throughput, normal throughput is in effect and deduplication occurs as specified.</p>
/// <p>For information on throughput quotas, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html">Quotas related to messages</a> in the <i>Amazon SQS Developer Guide</i>.</p>
pub fn attribute_names(mut self, input: crate::types::QueueAttributeName) -> Self {
let mut v = self.attribute_names.unwrap_or_default();
v.push(input);
self.attribute_names = ::std::option::Option::Some(v);
self
}
/// <p>A list of attributes for which to retrieve information.</p>
/// <p>The <code>AttributeNames</code> parameter is optional, but if you don't specify values for this parameter, the request returns empty results.</p><note>
/// <p>In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.</p>
/// </note>
/// <p>The following attributes are supported:</p><important>
/// <p>The <code>ApproximateNumberOfMessagesDelayed</code>, <code>ApproximateNumberOfMessagesNotVisible</code>, and <code>ApproximateNumberOfMessages</code> metrics may not achieve consistency until at least 1 minute after the producers stop sending messages. This period is required for the queue metadata to reach eventual consistency.</p>
/// </important>
/// <ul>
/// <li>
/// <p><code>All</code> – Returns all values.</p></li>
/// <li>
/// <p><code>ApproximateNumberOfMessages</code> – Returns the approximate number of messages available for retrieval from the queue.</p></li>
/// <li>
/// <p><code>ApproximateNumberOfMessagesDelayed</code> – Returns the approximate number of messages in the queue that are delayed and not available for reading immediately. This can happen when the queue is configured as a delay queue or when a message has been sent with a delay parameter.</p></li>
/// <li>
/// <p><code>ApproximateNumberOfMessagesNotVisible</code> – Returns the approximate number of messages that are in flight. Messages are considered to be <i>in flight</i> if they have been sent to a client but have not yet been deleted or have not yet reached the end of their visibility window.</p></li>
/// <li>
/// <p><code>CreatedTimestamp</code> – Returns the time when the queue was created in seconds (<a href="http://en.wikipedia.org/wiki/Unix_time">epoch time</a>).</p></li>
/// <li>
/// <p><code>DelaySeconds</code> – Returns the default delay on the queue in seconds.</p></li>
/// <li>
/// <p><code>LastModifiedTimestamp</code> – Returns the time when the queue was last changed in seconds (<a href="http://en.wikipedia.org/wiki/Unix_time">epoch time</a>).</p></li>
/// <li>
/// <p><code>MaximumMessageSize</code> – Returns the limit of how many bytes a message can contain before Amazon SQS rejects it.</p></li>
/// <li>
/// <p><code>MessageRetentionPeriod</code> – Returns the length of time, in seconds, for which Amazon SQS retains a message. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the <code>MessageRetentionPeriod</code> attribute can take up to 15 minutes and will impact existing messages in the queue potentially causing them to be expired and deleted if the <code>MessageRetentionPeriod</code> is reduced below the age of existing messages.</p></li>
/// <li>
/// <p><code>Policy</code> – Returns the policy of the queue.</p></li>
/// <li>
/// <p><code>QueueArn</code> – Returns the Amazon resource name (ARN) of the queue.</p></li>
/// <li>
/// <p><code>ReceiveMessageWaitTimeSeconds</code> – Returns the length of time, in seconds, for which the <code>ReceiveMessage</code> action waits for a message to arrive.</p></li>
/// <li>
/// <p><code>VisibilityTimeout</code> – Returns the visibility timeout for the queue. For more information about the visibility timeout, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html">Visibility Timeout</a> in the <i>Amazon SQS Developer Guide</i>.</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">dead-letter queues:</a></p>
/// <ul>
/// <li>
/// <p><code>RedrivePolicy</code> – The string that includes the parameters for the dead-letter queue functionality of the source queue as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>deadLetterTargetArn</code> – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of <code>maxReceiveCount</code> is exceeded.</p></li>
/// <li>
/// <p><code>maxReceiveCount</code> – The number of times a message is delivered to the source queue before being moved to the dead-letter queue. Default: 10. When the <code>ReceiveCount</code> for a message exceeds the <code>maxReceiveCount</code> for a queue, Amazon SQS moves the message to the dead-letter-queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>RedriveAllowPolicy</code> – The string that includes the parameters for the permissions for the dead-letter queue redrive permission and which source queues can specify dead-letter queues as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>redrivePermission</code> – The permission type that defines which source queues can specify the current queue as the dead-letter queue. Valid values are:</p>
/// <ul>
/// <li>
/// <p><code>allowAll</code> – (Default) Any source queues in this Amazon Web Services account in the same Region can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>denyAll</code> – No source queues can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>byQueue</code> – Only queues specified by the <code>sourceQueueArns</code> parameter can specify this queue as the dead-letter queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>sourceQueueArns</code> – The Amazon Resource Names (ARN)s of the source queues that can specify this queue as the dead-letter queue and redrive messages. You can specify this parameter only when the <code>redrivePermission</code> parameter is set to <code>byQueue</code>. You can specify up to 10 source queue ARNs. To allow more than 10 source queues to specify dead-letter queues, set the <code>redrivePermission</code> parameter to <code>allowAll</code>.</p></li>
/// </ul></li>
/// </ul><note>
/// <p>The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.</p>
/// </note>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html">server-side-encryption</a>:</p>
/// <ul>
/// <li>
/// <p><code>KmsMasterKeyId</code> – Returns the ID of an Amazon Web Services managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-sse-key-terms">Key Terms</a>.</p></li>
/// <li>
/// <p><code>KmsDataKeyReusePeriodSeconds</code> – Returns the length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling KMS again. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work">How Does the Data Key Reuse Period Work?</a>.</p></li>
/// <li>
/// <p><code>SqsManagedSseEnabled</code> – Returns information about whether the queue is using SSE-SQS encryption using SQS owned encryption keys. Only one server-side encryption option is supported per queue (for example, <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sse-existing-queue.html">SSE-KMS</a> or <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sqs-sse-queue.html">SSE-SQS</a>).</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO (first-in-first-out) queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>FifoQueue</code> – Returns information about whether the queue is FIFO. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-understanding-logic.html">FIFO queue logic</a> in the <i>Amazon SQS Developer Guide</i>.</p><note>
/// <p>To determine whether a queue is <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO</a>, you can check whether <code>QueueName</code> ends with the <code>.fifo</code> suffix.</p>
/// </note></li>
/// <li>
/// <p><code>ContentBasedDeduplication</code> – Returns whether content-based deduplication is enabled for the queue. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-exactly-once-processing.html">Exactly-once processing</a> in the <i>Amazon SQS Developer Guide</i>.</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html">high throughput for FIFO queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>DeduplicationScope</code> – Specifies whether message deduplication occurs at the message group or queue level. Valid values are <code>messageGroup</code> and <code>queue</code>.</p></li>
/// <li>
/// <p><code>FifoThroughputLimit</code> – Specifies whether the FIFO queue throughput quota applies to the entire queue or per message group. Valid values are <code>perQueue</code> and <code>perMessageGroupId</code>. The <code>perMessageGroupId</code> value is allowed only when the value for <code>DeduplicationScope</code> is <code>messageGroup</code>.</p></li>
/// </ul>
/// <p>To enable high throughput for FIFO queues, do the following:</p>
/// <ul>
/// <li>
/// <p>Set <code>DeduplicationScope</code> to <code>messageGroup</code>.</p></li>
/// <li>
/// <p>Set <code>FifoThroughputLimit</code> to <code>perMessageGroupId</code>.</p></li>
/// </ul>
/// <p>If you set these attributes to anything other than the values shown for enabling high throughput, normal throughput is in effect and deduplication occurs as specified.</p>
/// <p>For information on throughput quotas, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html">Quotas related to messages</a> in the <i>Amazon SQS Developer Guide</i>.</p>
pub fn set_attribute_names(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::QueueAttributeName>>) -> Self {
self.attribute_names = input;
self
}
/// <p>A list of attributes for which to retrieve information.</p>
/// <p>The <code>AttributeNames</code> parameter is optional, but if you don't specify values for this parameter, the request returns empty results.</p><note>
/// <p>In the future, new attributes might be added. If you write code that calls this action, we recommend that you structure your code so that it can handle new attributes gracefully.</p>
/// </note>
/// <p>The following attributes are supported:</p><important>
/// <p>The <code>ApproximateNumberOfMessagesDelayed</code>, <code>ApproximateNumberOfMessagesNotVisible</code>, and <code>ApproximateNumberOfMessages</code> metrics may not achieve consistency until at least 1 minute after the producers stop sending messages. This period is required for the queue metadata to reach eventual consistency.</p>
/// </important>
/// <ul>
/// <li>
/// <p><code>All</code> – Returns all values.</p></li>
/// <li>
/// <p><code>ApproximateNumberOfMessages</code> – Returns the approximate number of messages available for retrieval from the queue.</p></li>
/// <li>
/// <p><code>ApproximateNumberOfMessagesDelayed</code> – Returns the approximate number of messages in the queue that are delayed and not available for reading immediately. This can happen when the queue is configured as a delay queue or when a message has been sent with a delay parameter.</p></li>
/// <li>
/// <p><code>ApproximateNumberOfMessagesNotVisible</code> – Returns the approximate number of messages that are in flight. Messages are considered to be <i>in flight</i> if they have been sent to a client but have not yet been deleted or have not yet reached the end of their visibility window.</p></li>
/// <li>
/// <p><code>CreatedTimestamp</code> – Returns the time when the queue was created in seconds (<a href="http://en.wikipedia.org/wiki/Unix_time">epoch time</a>).</p></li>
/// <li>
/// <p><code>DelaySeconds</code> – Returns the default delay on the queue in seconds.</p></li>
/// <li>
/// <p><code>LastModifiedTimestamp</code> – Returns the time when the queue was last changed in seconds (<a href="http://en.wikipedia.org/wiki/Unix_time">epoch time</a>).</p></li>
/// <li>
/// <p><code>MaximumMessageSize</code> – Returns the limit of how many bytes a message can contain before Amazon SQS rejects it.</p></li>
/// <li>
/// <p><code>MessageRetentionPeriod</code> – Returns the length of time, in seconds, for which Amazon SQS retains a message. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the Amazon SQS system. Changes made to the <code>MessageRetentionPeriod</code> attribute can take up to 15 minutes and will impact existing messages in the queue potentially causing them to be expired and deleted if the <code>MessageRetentionPeriod</code> is reduced below the age of existing messages.</p></li>
/// <li>
/// <p><code>Policy</code> – Returns the policy of the queue.</p></li>
/// <li>
/// <p><code>QueueArn</code> – Returns the Amazon resource name (ARN) of the queue.</p></li>
/// <li>
/// <p><code>ReceiveMessageWaitTimeSeconds</code> – Returns the length of time, in seconds, for which the <code>ReceiveMessage</code> action waits for a message to arrive.</p></li>
/// <li>
/// <p><code>VisibilityTimeout</code> – Returns the visibility timeout for the queue. For more information about the visibility timeout, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html">Visibility Timeout</a> in the <i>Amazon SQS Developer Guide</i>.</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">dead-letter queues:</a></p>
/// <ul>
/// <li>
/// <p><code>RedrivePolicy</code> – The string that includes the parameters for the dead-letter queue functionality of the source queue as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>deadLetterTargetArn</code> – The Amazon Resource Name (ARN) of the dead-letter queue to which Amazon SQS moves messages after the value of <code>maxReceiveCount</code> is exceeded.</p></li>
/// <li>
/// <p><code>maxReceiveCount</code> – The number of times a message is delivered to the source queue before being moved to the dead-letter queue. Default: 10. When the <code>ReceiveCount</code> for a message exceeds the <code>maxReceiveCount</code> for a queue, Amazon SQS moves the message to the dead-letter-queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>RedriveAllowPolicy</code> – The string that includes the parameters for the permissions for the dead-letter queue redrive permission and which source queues can specify dead-letter queues as a JSON object. The parameters are as follows:</p>
/// <ul>
/// <li>
/// <p><code>redrivePermission</code> – The permission type that defines which source queues can specify the current queue as the dead-letter queue. Valid values are:</p>
/// <ul>
/// <li>
/// <p><code>allowAll</code> – (Default) Any source queues in this Amazon Web Services account in the same Region can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>denyAll</code> – No source queues can specify this queue as the dead-letter queue.</p></li>
/// <li>
/// <p><code>byQueue</code> – Only queues specified by the <code>sourceQueueArns</code> parameter can specify this queue as the dead-letter queue.</p></li>
/// </ul></li>
/// <li>
/// <p><code>sourceQueueArns</code> – The Amazon Resource Names (ARN)s of the source queues that can specify this queue as the dead-letter queue and redrive messages. You can specify this parameter only when the <code>redrivePermission</code> parameter is set to <code>byQueue</code>. You can specify up to 10 source queue ARNs. To allow more than 10 source queues to specify dead-letter queues, set the <code>redrivePermission</code> parameter to <code>allowAll</code>.</p></li>
/// </ul></li>
/// </ul><note>
/// <p>The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter queue of a standard queue must also be a standard queue.</p>
/// </note>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html">server-side-encryption</a>:</p>
/// <ul>
/// <li>
/// <p><code>KmsMasterKeyId</code> – Returns the ID of an Amazon Web Services managed customer master key (CMK) for Amazon SQS or a custom CMK. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-sse-key-terms">Key Terms</a>.</p></li>
/// <li>
/// <p><code>KmsDataKeyReusePeriodSeconds</code> – Returns the length of time, in seconds, for which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling KMS again. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work">How Does the Data Key Reuse Period Work?</a>.</p></li>
/// <li>
/// <p><code>SqsManagedSseEnabled</code> – Returns information about whether the queue is using SSE-SQS encryption using SQS owned encryption keys. Only one server-side encryption option is supported per queue (for example, <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sse-existing-queue.html">SSE-KMS</a> or <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sqs-sse-queue.html">SSE-SQS</a>).</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO (first-in-first-out) queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>FifoQueue</code> – Returns information about whether the queue is FIFO. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-understanding-logic.html">FIFO queue logic</a> in the <i>Amazon SQS Developer Guide</i>.</p><note>
/// <p>To determine whether a queue is <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO</a>, you can check whether <code>QueueName</code> ends with the <code>.fifo</code> suffix.</p>
/// </note></li>
/// <li>
/// <p><code>ContentBasedDeduplication</code> – Returns whether content-based deduplication is enabled for the queue. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-exactly-once-processing.html">Exactly-once processing</a> in the <i>Amazon SQS Developer Guide</i>.</p></li>
/// </ul>
/// <p>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html">high throughput for FIFO queues</a>:</p>
/// <ul>
/// <li>
/// <p><code>DeduplicationScope</code> – Specifies whether message deduplication occurs at the message group or queue level. Valid values are <code>messageGroup</code> and <code>queue</code>.</p></li>
/// <li>
/// <p><code>FifoThroughputLimit</code> – Specifies whether the FIFO queue throughput quota applies to the entire queue or per message group. Valid values are <code>perQueue</code> and <code>perMessageGroupId</code>. The <code>perMessageGroupId</code> value is allowed only when the value for <code>DeduplicationScope</code> is <code>messageGroup</code>.</p></li>
/// </ul>
/// <p>To enable high throughput for FIFO queues, do the following:</p>
/// <ul>
/// <li>
/// <p>Set <code>DeduplicationScope</code> to <code>messageGroup</code>.</p></li>
/// <li>
/// <p>Set <code>FifoThroughputLimit</code> to <code>perMessageGroupId</code>.</p></li>
/// </ul>
/// <p>If you set these attributes to anything other than the values shown for enabling high throughput, normal throughput is in effect and deduplication occurs as specified.</p>
/// <p>For information on throughput quotas, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html">Quotas related to messages</a> in the <i>Amazon SQS Developer Guide</i>.</p>
pub fn get_attribute_names(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::QueueAttributeName>> {
&self.attribute_names
}
/// Consumes the builder and constructs a [`GetQueueAttributesInput`](crate::operation::get_queue_attributes::GetQueueAttributesInput).
pub fn build(
self,
) -> ::std::result::Result<crate::operation::get_queue_attributes::GetQueueAttributesInput, ::aws_smithy_types::error::operation::BuildError>
{
::std::result::Result::Ok(crate::operation::get_queue_attributes::GetQueueAttributesInput {
queue_url: self.queue_url,
attribute_names: self.attribute_names,
})
}
}