aws-sdk-snowball 0.27.0

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl CreateAddressInput {
    /// Consumes the builder and constructs an Operation<[`CreateAddress`](crate::operation::create_address::CreateAddress)>
    #[allow(unused_mut)]
    #[allow(clippy::let_and_return)]
    #[allow(clippy::needless_borrow)]
    pub async fn make_operation(
        &self,
        _config: &crate::config::Config,
    ) -> std::result::Result<
        aws_smithy_http::operation::Operation<
            crate::operation::create_address::CreateAddress,
            aws_http::retry::AwsResponseRetryClassifier,
        >,
        aws_smithy_http::operation::error::BuildError,
    > {
        let params_result = crate::endpoint::Params::builder()
            .set_region(_config.region.as_ref().map(|r| r.as_ref().to_owned()))
            .set_use_dual_stack(_config.use_dual_stack)
            .set_use_fips(_config.use_fips)
            .set_endpoint(_config.endpoint_url.clone())
            .build()
            .map_err(|err| {
                aws_smithy_http::endpoint::ResolveEndpointError::from_source(
                    "could not construct endpoint parameters",
                    err,
                )
            });
        let (endpoint_result, params) = match params_result {
            Ok(params) => (
                _config.endpoint_resolver.resolve_endpoint(&params),
                Some(params),
            ),
            Err(e) => (Err(e), None),
        };
        let mut request = {
            fn uri_base(
                _input: &crate::operation::create_address::CreateAddressInput,
                output: &mut String,
            ) -> std::result::Result<(), aws_smithy_http::operation::error::BuildError>
            {
                use std::fmt::Write as _;
                write!(output, "/").expect("formatting should succeed");
                Ok(())
            }
            #[allow(clippy::unnecessary_wraps)]
            fn update_http_builder(
                input: &crate::operation::create_address::CreateAddressInput,
                builder: http::request::Builder,
            ) -> std::result::Result<
                http::request::Builder,
                aws_smithy_http::operation::error::BuildError,
            > {
                let mut uri = String::new();
                uri_base(input, &mut uri)?;
                Ok(builder.method("POST").uri(uri))
            }
            let mut builder = update_http_builder(&self, http::request::Builder::new())?;
            builder = aws_smithy_http::header::set_request_header_if_absent(
                builder,
                http::header::CONTENT_TYPE,
                "application/x-amz-json-1.1",
            );
            builder = aws_smithy_http::header::set_request_header_if_absent(
                builder,
                http::header::HeaderName::from_static("x-amz-target"),
                "AWSIESnowballJobManagementService.CreateAddress",
            );
            builder
        };
        let mut properties = aws_smithy_http::property_bag::SharedPropertyBag::new();
        #[allow(clippy::useless_conversion)]
        let body = aws_smithy_http::body::SdkBody::from(
            crate::protocol_serde::shape_create_address::ser_create_address_input(&self)?,
        );
        if let Some(content_length) = body.content_length() {
            request = aws_smithy_http::header::set_request_header_if_absent(
                request,
                http::header::CONTENT_LENGTH,
                content_length,
            );
        }
        let request = request.body(body).expect("should be valid request");
        let mut request = aws_smithy_http::operation::Request::from_parts(request, properties);
        request.properties_mut().insert(endpoint_result);
        if let Some(params) = params {
            request.properties_mut().insert(params);
        }
        request
            .properties_mut()
            .insert(aws_smithy_http::http_versions::DEFAULT_HTTP_VERSION_LIST.clone());
        let mut user_agent = aws_http::user_agent::AwsUserAgent::new_from_environment(
            aws_types::os_shim_internal::Env::real(),
            crate::meta::API_METADATA.clone(),
        );
        if let Some(app_name) = _config.app_name() {
            user_agent = user_agent.with_app_name(app_name.clone());
        }
        request.properties_mut().insert(user_agent);
        let mut signing_config = aws_sig_auth::signer::OperationSigningConfig::default_config();
        request.properties_mut().insert(signing_config);
        request
            .properties_mut()
            .insert(aws_types::SigningService::from_static(
                _config.signing_service(),
            ));
        if let Some(region) = &_config.region {
            request
                .properties_mut()
                .insert(aws_types::region::SigningRegion::from(region.clone()));
        }
        if let Some(region) = &_config.region {
            request.properties_mut().insert(region.clone());
        }
        aws_http::auth::set_credentials_cache(
            &mut request.properties_mut(),
            _config.credentials_cache.clone(),
        );
        let op = aws_smithy_http::operation::Operation::new(
            request,
            crate::operation::create_address::CreateAddress::new(),
        )
        .with_metadata(aws_smithy_http::operation::Metadata::new(
            "CreateAddress",
            "snowball",
        ));
        let op = op.with_retry_classifier(aws_http::retry::AwsResponseRetryClassifier::new());
        Ok(op)
    }
}
/// `ParseStrictResponse` impl for `CreateAddress`.
#[derive(std::clone::Clone, std::default::Default, std::fmt::Debug)]
#[non_exhaustive]
#[doc(hidden)]
pub struct CreateAddress;
impl CreateAddress {
    #[doc(hidden)]
    pub fn new() -> Self {
        Self
    }
}
impl aws_smithy_http::response::ParseStrictResponse for CreateAddress {
    type Output = std::result::Result<
        crate::operation::create_address::CreateAddressOutput,
        crate::operation::create_address::CreateAddressError,
    >;
    fn parse(&self, response: &http::Response<bytes::Bytes>) -> Self::Output {
        let (success, status) = (response.status().is_success(), response.status().as_u16());
        let headers = response.headers();
        let body = response.body().as_ref();
        tracing::debug!(request_id = ?aws_http::request_id::RequestId::request_id(response));
        if !success && status != 200 {
            crate::protocol_serde::shape_create_address::de_create_address_http_error(
                status, headers, body,
            )
        } else {
            crate::protocol_serde::shape_create_address::de_create_address_http_response(
                status, headers, body,
            )
        }
    }
}

/// Do not use this.
///
/// Operation `*Error/*ErrorKind` types were combined into a single `*Error` enum. The `.kind` field on `*Error` no longer exists and isn't needed anymore (you can just match on the error directly since it's an enum now).
#[deprecated(
    note = "Operation `*Error/*ErrorKind` types were combined into a single `*Error` enum. The `.kind` field on `*Error` no longer exists and isn't needed anymore (you can just match on the error directly since it's an enum now)."
)]
pub type CreateAddressErrorKind = CreateAddressError;
/// Error type for the `CreateAddressError` operation.
#[non_exhaustive]
#[derive(std::fmt::Debug)]
pub enum CreateAddressError {
    /// <p>The address provided was invalid. Check the address with your region's carrier, and try again.</p>
    InvalidAddressException(crate::types::error::InvalidAddressException),
    /// <p>The address is either outside the serviceable area for your region, or an error occurred. Check the address with your region's carrier and try again. If the issue persists, contact Amazon Web Services Support.</p>
    UnsupportedAddressException(crate::types::error::UnsupportedAddressException),
    /// An unexpected error occurred (e.g., invalid JSON returned by the service or an unknown error code).
    Unhandled(aws_smithy_types::error::Unhandled),
}
impl aws_smithy_http::result::CreateUnhandledError for CreateAddressError {
    fn create_unhandled_error(
        source: Box<dyn std::error::Error + Send + Sync + 'static>,
        meta: std::option::Option<aws_smithy_types::error::ErrorMetadata>,
    ) -> Self {
        Self::Unhandled({
            let mut builder = aws_smithy_types::error::Unhandled::builder().source(source);
            builder.set_meta(meta);
            builder.build()
        })
    }
}
impl std::fmt::Display for CreateAddressError {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        match self {
            Self::InvalidAddressException(_inner) => _inner.fmt(f),
            Self::UnsupportedAddressException(_inner) => _inner.fmt(f),
            Self::Unhandled(_inner) => _inner.fmt(f),
        }
    }
}
impl aws_smithy_types::error::metadata::ProvideErrorMetadata for CreateAddressError {
    fn meta(&self) -> &aws_smithy_types::error::ErrorMetadata {
        match self {
            Self::InvalidAddressException(_inner) => {
                aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner)
            }
            Self::UnsupportedAddressException(_inner) => {
                aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner)
            }
            Self::Unhandled(_inner) => {
                aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner)
            }
        }
    }
}
impl aws_http::request_id::RequestId for crate::operation::create_address::CreateAddressError {
    fn request_id(&self) -> Option<&str> {
        self.meta().request_id()
    }
}
impl aws_smithy_types::retry::ProvideErrorKind for CreateAddressError {
    fn code(&self) -> std::option::Option<&str> {
        aws_smithy_types::error::metadata::ProvideErrorMetadata::code(self)
    }
    fn retryable_error_kind(&self) -> std::option::Option<aws_smithy_types::retry::ErrorKind> {
        None
    }
}
impl CreateAddressError {
    /// Creates the `CreateAddressError::Unhandled` variant from any error type.
    pub fn unhandled(err: impl Into<Box<dyn std::error::Error + Send + Sync + 'static>>) -> Self {
        Self::Unhandled(
            aws_smithy_types::error::Unhandled::builder()
                .source(err)
                .build(),
        )
    }

    /// Creates the `CreateAddressError::Unhandled` variant from a `aws_smithy_types::error::ErrorMetadata`.
    pub fn generic(err: aws_smithy_types::error::ErrorMetadata) -> Self {
        Self::Unhandled(
            aws_smithy_types::error::Unhandled::builder()
                .source(err.clone())
                .meta(err)
                .build(),
        )
    }
    ///
    /// Returns error metadata, which includes the error code, message,
    /// request ID, and potentially additional information.
    ///
    pub fn meta(&self) -> &aws_smithy_types::error::ErrorMetadata {
        use aws_smithy_types::error::metadata::ProvideErrorMetadata;
        match self {
            Self::InvalidAddressException(e) => e.meta(),
            Self::UnsupportedAddressException(e) => e.meta(),
            Self::Unhandled(e) => e.meta(),
        }
    }
    /// Returns `true` if the error kind is `CreateAddressError::InvalidAddressException`.
    pub fn is_invalid_address_exception(&self) -> bool {
        matches!(self, Self::InvalidAddressException(_))
    }
    /// Returns `true` if the error kind is `CreateAddressError::UnsupportedAddressException`.
    pub fn is_unsupported_address_exception(&self) -> bool {
        matches!(self, Self::UnsupportedAddressException(_))
    }
}
impl std::error::Error for CreateAddressError {
    fn source(&self) -> std::option::Option<&(dyn std::error::Error + 'static)> {
        match self {
            Self::InvalidAddressException(_inner) => Some(_inner),
            Self::UnsupportedAddressException(_inner) => Some(_inner),
            Self::Unhandled(_inner) => Some(_inner),
        }
    }
}

pub use crate::operation::create_address::_create_address_output::CreateAddressOutput;

pub use crate::operation::create_address::_create_address_input::CreateAddressInput;

mod _create_address_input;

mod _create_address_output;

/// Builders
pub mod builders;