aws-sdk-eventbridgev2 1.2.0

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
#[derive(Debug)]
pub(crate) struct Handle {
    pub(crate) conf: crate::Config,
    #[allow(dead_code)] // unused when a service does not provide any operations
    pub(crate) runtime_plugins: ::aws_smithy_runtime_api::client::runtime_plugin::RuntimePlugins,
}

/// Client for Amazon EventBridgeV2
///
/// Client for invoking operations on Amazon EventBridgeV2. Each operation on Amazon EventBridgeV2 is a method on this
/// this struct. `.send()` MUST be invoked on the generated operations to dispatch the request to the service.
/// ## Constructing a `Client`
///
/// A [`Config`] is required to construct a client. For most use cases, the [`aws-config`]
/// crate should be used to automatically resolve this config using
/// [`aws_config::load_from_env()`], since this will resolve an [`SdkConfig`] which can be shared
/// across multiple different AWS SDK clients. This config resolution process can be customized
/// by calling [`aws_config::from_env()`] instead, which returns a [`ConfigLoader`] that uses
/// the [builder pattern] to customize the default config.
///
/// In the simplest case, creating a client looks as follows:
/// ```rust,no_run
/// # async fn wrapper() {
/// let config = aws_config::load_from_env().await;
/// let client = aws_sdk_eventbridgev2::Client::new(&config);
/// # }
/// ```
///
/// Occasionally, SDKs may have additional service-specific values that can be set on the [`Config`] that
/// is absent from [`SdkConfig`], or slightly different settings for a specific client may be desired.
/// The [`Builder`](crate::config::Builder) struct implements `From<&SdkConfig>`, so setting these specific settings can be
/// done as follows:
///
/// ```rust,no_run
/// # async fn wrapper() {
/// let sdk_config = ::aws_config::load_from_env().await;
/// let config = aws_sdk_eventbridgev2::config::Builder::from(&sdk_config)
/// # /*
///     .some_service_specific_setting("value")
/// # */
///     .build();
/// # }
/// ```
///
/// See the [`aws-config` docs] and [`Config`] for more information on customizing configuration.
///
/// _Note:_ Client construction is expensive due to connection thread pool initialization, and should
/// be done once at application start-up.
///
/// [`Config`]: crate::Config
/// [`ConfigLoader`]: https://docs.rs/aws-config/*/aws_config/struct.ConfigLoader.html
/// [`SdkConfig`]: https://docs.rs/aws-config/*/aws_config/struct.SdkConfig.html
/// [`aws-config` docs]: https://docs.rs/aws-config/*
/// [`aws-config`]: https://crates.io/crates/aws-config
/// [`aws_config::from_env()`]: https://docs.rs/aws-config/*/aws_config/fn.from_env.html
/// [`aws_config::load_from_env()`]: https://docs.rs/aws-config/*/aws_config/fn.load_from_env.html
/// [builder pattern]: https://rust-lang.github.io/api-guidelines/type-safety.html#builders-enable-construction-of-complex-values-c-builder
/// # Using the `Client`
///
/// A client has a function for every operation that can be performed by the service.
/// For example, the [`CreateEventBus`](crate::operation::create_event_bus) operation has
/// a [`Client::create_event_bus`], function which returns a builder for that operation.
/// The fluent builder ultimately has a `send()` function that returns an async future that
/// returns a result, as illustrated below:
///
/// ```rust,ignore
/// let result = client.create_event_bus()
///     .name("example")
///     .send()
///     .await;
/// ```
///
/// The underlying HTTP requests that get made by this can be modified with the `customize_operation`
/// function on the fluent builder. See the [`customize`](crate::client::customize) module for more
/// information.
/// # Waiters
///
/// This client provides `wait_until` methods behind the [`Waiters`](crate::client::Waiters) trait.
/// To use them, simply import the trait, and then call one of the `wait_until` methods. This will
/// return a waiter fluent builder that takes various parameters, which are documented on the builder
/// type. Once parameters have been provided, the `wait` method can be called to initiate waiting.
///
/// For example, if there was a `wait_until_thing` method, it could look like:
/// ```rust,ignore
/// let result = client.wait_until_thing()
///     .thing_id("someId")
///     .wait(Duration::from_secs(120))
///     .await;
/// ```
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct Client {
    handle: ::std::sync::Arc<Handle>,
}

impl Client {
    /// Creates a new client from the service [`Config`](crate::Config).
    ///
    /// # Panics
    ///
    /// This method will panic in the following cases:
    ///
    /// - Retries or timeouts are enabled without a `sleep_impl` configured.
    /// - Identity caching is enabled without a `sleep_impl` and `time_source` configured.
    /// - No `behavior_version` is provided.
    ///
    /// The panic message for each of these will have instructions on how to resolve them.
    #[track_caller]
    pub fn from_conf(conf: crate::Config) -> Self {
        let handle = Handle {
            conf: conf.clone(),
            runtime_plugins: crate::config::base_client_runtime_plugins(conf),
        };
        if let Err(err) = Self::validate_config(&handle) {
            panic!("Invalid client configuration: {err}");
        }
        Self {
            handle: ::std::sync::Arc::new(handle),
        }
    }

    /// Returns the client's configuration.
    pub fn config(&self) -> &crate::Config {
        &self.handle.conf
    }

    fn validate_config(handle: &Handle) -> ::std::result::Result<(), ::aws_smithy_runtime_api::box_error::BoxError> {
        let mut cfg = ::aws_smithy_types::config_bag::ConfigBag::base();
        handle
            .runtime_plugins
            .apply_client_configuration(&mut cfg)?
            .validate_base_client_config(&cfg)?;
        Ok(())
    }
}

///
/// Waiter functions for the client.
///
/// Import this trait to get `wait_until` methods on the client.
///
pub trait Waiters {
    /// Waits until the event bus reports ACTIVE. Use after CreateEventBus (bus starts in CREATING) or UpdateEventBus (bus moves to UPDATING) before invoking operations that require an ACTIVE bus. Fails fast on the terminal failure states CREATE_FAILED, UPDATE_FAILED, and DELETE_FAILED, surfacing StateReason. CREATING, UPDATING, and DELETING are intentionally unmodeled intermediate states that fall through to the implicit retry.
    fn wait_until_event_bus_active(&self) -> crate::waiters::event_bus_active::EventBusActiveFluentBuilder;
    /// Waits until the event bus is fully deleted, signaled by DescribeEventBus returning ResourceNotFoundException. Use after DeleteEventBus. Fails fast on the terminal DELETE_FAILED state, surfacing StateReason; retry DeleteEventBus after removing subscribers.
    fn wait_until_event_bus_deleted(&self) -> crate::waiters::event_bus_deleted::EventBusDeletedFluentBuilder;
}
impl Waiters for Client {
    fn wait_until_event_bus_active(&self) -> crate::waiters::event_bus_active::EventBusActiveFluentBuilder {
        crate::waiters::event_bus_active::EventBusActiveFluentBuilder::new(self.handle.clone())
    }
    fn wait_until_event_bus_deleted(&self) -> crate::waiters::event_bus_deleted::EventBusDeletedFluentBuilder {
        crate::waiters::event_bus_deleted::EventBusDeletedFluentBuilder::new(self.handle.clone())
    }
}

impl Client {
    /// Creates a new client from an [SDK Config](::aws_types::sdk_config::SdkConfig).
    ///
    /// # Panics
    ///
    /// - This method will panic if the `sdk_config` is missing an async sleep implementation. If you experience this panic, set
    ///   the `sleep_impl` on the Config passed into this function to fix it.
    /// - This method will panic if the `sdk_config` is missing an HTTP connector. If you experience this panic, set the
    ///   `http_connector` on the Config passed into this function to fix it.
    /// - This method will panic if no `BehaviorVersion` is provided. If you experience this panic, set `behavior_version` on the Config or enable the `behavior-version-latest` Cargo feature.
    #[track_caller]
    pub fn new(sdk_config: &::aws_types::sdk_config::SdkConfig) -> Self {
        Self::from_conf(sdk_config.into())
    }
}

mod create_event_bus;

mod create_event_source;

mod create_subscriber;

/// Operation customization and supporting types.
///
/// The underlying HTTP requests made during an operation can be customized
/// by calling the `customize()` method on the builder returned from a client
/// operation call. For example, this can be used to add an additional HTTP header:
///
/// ```ignore
/// # async fn wrapper() -> ::std::result::Result<(), aws_sdk_eventbridgev2::Error> {
/// # let client: aws_sdk_eventbridgev2::Client = unimplemented!();
/// use ::http_1x::header::{HeaderName, HeaderValue};
///
/// let result = client.create_event_bus()
///     .customize()
///     .mutate_request(|req| {
///         // Add `x-example-header` with value
///         req.headers_mut()
///             .insert(
///                 HeaderName::from_static("x-example-header"),
///                 HeaderValue::from_static("1"),
///             );
///     })
///     .send()
///     .await;
/// # }
/// ```
pub mod customize;

mod delete_event_bus;

mod delete_event_source;

mod delete_resource_policy;

mod delete_subscriber;

mod describe_event_bus;

mod describe_event_source;

mod describe_subscriber;

mod get_resource_policy;

mod list_event_buses;

mod list_event_sources;

mod list_resource_policies;

mod list_subscribers;

mod list_tags_for_resource;

mod put_events;

mod put_raw_events;

mod put_resource_policy;

mod revoke_resource;

mod tag_resource;

mod untag_resource;

mod update_event_bus;

mod update_event_source;

mod update_subscriber;