// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
#[derive(Debug)]
pub(crate) struct Handle {
pub(crate) client: aws_smithy_client::Client<
aws_smithy_client::erase::DynConnector,
aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
>,
pub(crate) conf: crate::Config,
}
/// Client for AWS EC2 Instance Connect
///
/// Client for invoking operations on AWS EC2 Instance Connect. Each operation on AWS EC2 Instance Connect is a method on this
/// this struct. `.send()` MUST be invoked on the generated operations to dispatch the request to the service.
///
/// # Examples
/// **Constructing a client and invoking an operation**
/// ```rust,no_run
/// # async fn docs() {
/// // create a shared configuration. This can be used & shared between multiple service clients.
/// let shared_config = aws_config::load_from_env().await;
/// let client = aws_sdk_ec2instanceconnect::Client::new(&shared_config);
/// // invoke an operation
/// /* let rsp = client
/// .<operation_name>().
/// .<param>("some value")
/// .send().await; */
/// # }
/// ```
/// **Constructing a client with custom configuration**
/// ```rust,no_run
/// use aws_config::RetryConfig;
/// # async fn docs() {
/// let shared_config = aws_config::load_from_env().await;
/// let config = aws_sdk_ec2instanceconnect::config::Builder::from(&shared_config)
/// .retry_config(RetryConfig::disabled())
/// .build();
/// let client = aws_sdk_ec2instanceconnect::Client::from_conf(config);
/// # }
#[derive(std::fmt::Debug)]
pub struct Client {
handle: std::sync::Arc<Handle>,
}
impl std::clone::Clone for Client {
fn clone(&self) -> Self {
Self {
handle: self.handle.clone(),
}
}
}
#[doc(inline)]
pub use aws_smithy_client::Builder;
impl
From<
aws_smithy_client::Client<
aws_smithy_client::erase::DynConnector,
aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
>,
> for Client
{
fn from(
client: aws_smithy_client::Client<
aws_smithy_client::erase::DynConnector,
aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
>,
) -> Self {
Self::with_config(client, crate::Config::builder().build())
}
}
impl Client {
/// Creates a client with the given service configuration.
pub fn with_config(
client: aws_smithy_client::Client<
aws_smithy_client::erase::DynConnector,
aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
>,
conf: crate::Config,
) -> Self {
Self {
handle: std::sync::Arc::new(Handle { client, conf }),
}
}
/// Returns the client's configuration.
pub fn conf(&self) -> &crate::Config {
&self.handle.conf
}
}
impl Client {
/// Constructs a fluent builder for the [`SendSerialConsoleSSHPublicKey`](crate::client::fluent_builders::SendSerialConsoleSSHPublicKey) operation.
///
/// - The fluent builder is configurable:
/// - [`instance_id(impl Into<String>)`](crate::client::fluent_builders::SendSerialConsoleSSHPublicKey::instance_id) / [`set_instance_id(Option<String>)`](crate::client::fluent_builders::SendSerialConsoleSSHPublicKey::set_instance_id): <p>The ID of the EC2 instance.</p>
/// - [`serial_port(i32)`](crate::client::fluent_builders::SendSerialConsoleSSHPublicKey::serial_port) / [`set_serial_port(i32)`](crate::client::fluent_builders::SendSerialConsoleSSHPublicKey::set_serial_port): <p>The serial port of the EC2 instance. Currently only port 0 is supported.</p> <p>Default: 0</p>
/// - [`ssh_public_key(impl Into<String>)`](crate::client::fluent_builders::SendSerialConsoleSSHPublicKey::ssh_public_key) / [`set_ssh_public_key(Option<String>)`](crate::client::fluent_builders::SendSerialConsoleSSHPublicKey::set_ssh_public_key): <p>The public key material. To use the public key, you must have the matching private key. For information about the supported key formats and lengths, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html#how-to-generate-your-own-key-and-import-it-to-aws">Requirements for key pairs</a> in the <i>Amazon EC2 User Guide</i>.</p>
/// - On success, responds with [`SendSerialConsoleSshPublicKeyOutput`](crate::output::SendSerialConsoleSshPublicKeyOutput) with field(s):
/// - [`request_id(Option<String>)`](crate::output::SendSerialConsoleSshPublicKeyOutput::request_id): <p>The ID of the request. Please provide this ID when contacting AWS Support for assistance.</p>
/// - [`success(bool)`](crate::output::SendSerialConsoleSshPublicKeyOutput::success): <p>Is true if the request succeeds and an error otherwise.</p>
/// - On failure, responds with [`SdkError<SendSerialConsoleSSHPublicKeyError>`](crate::error::SendSerialConsoleSSHPublicKeyError)
pub fn send_serial_console_ssh_public_key(
&self,
) -> fluent_builders::SendSerialConsoleSSHPublicKey {
fluent_builders::SendSerialConsoleSSHPublicKey::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`SendSSHPublicKey`](crate::client::fluent_builders::SendSSHPublicKey) operation.
///
/// - The fluent builder is configurable:
/// - [`instance_id(impl Into<String>)`](crate::client::fluent_builders::SendSSHPublicKey::instance_id) / [`set_instance_id(Option<String>)`](crate::client::fluent_builders::SendSSHPublicKey::set_instance_id): <p>The ID of the EC2 instance.</p>
/// - [`instance_os_user(impl Into<String>)`](crate::client::fluent_builders::SendSSHPublicKey::instance_os_user) / [`set_instance_os_user(Option<String>)`](crate::client::fluent_builders::SendSSHPublicKey::set_instance_os_user): <p>The OS user on the EC2 instance for whom the key can be used to authenticate.</p>
/// - [`ssh_public_key(impl Into<String>)`](crate::client::fluent_builders::SendSSHPublicKey::ssh_public_key) / [`set_ssh_public_key(Option<String>)`](crate::client::fluent_builders::SendSSHPublicKey::set_ssh_public_key): <p>The public key material. To use the public key, you must have the matching private key.</p>
/// - [`availability_zone(impl Into<String>)`](crate::client::fluent_builders::SendSSHPublicKey::availability_zone) / [`set_availability_zone(Option<String>)`](crate::client::fluent_builders::SendSSHPublicKey::set_availability_zone): <p>The Availability Zone in which the EC2 instance was launched.</p>
/// - On success, responds with [`SendSshPublicKeyOutput`](crate::output::SendSshPublicKeyOutput) with field(s):
/// - [`request_id(Option<String>)`](crate::output::SendSshPublicKeyOutput::request_id): <p>The ID of the request. Please provide this ID when contacting AWS Support for assistance.</p>
/// - [`success(bool)`](crate::output::SendSshPublicKeyOutput::success): <p>Is true if the request succeeds and an error otherwise.</p>
/// - On failure, responds with [`SdkError<SendSSHPublicKeyError>`](crate::error::SendSSHPublicKeyError)
pub fn send_ssh_public_key(&self) -> fluent_builders::SendSSHPublicKey {
fluent_builders::SendSSHPublicKey::new(self.handle.clone())
}
}
pub mod fluent_builders {
//!
//! Utilities to ergonomically construct a request to the service.
//!
//! Fluent builders are created through the [`Client`](crate::client::Client) by calling
//! one if its operation methods. After parameters are set using the builder methods,
//! the `send` method can be called to initiate the request.
//!
/// Fluent builder constructing a request to `SendSerialConsoleSSHPublicKey`.
///
/// <p>Pushes an SSH public key to the specified EC2 instance. The key remains for 60 seconds, which gives you 60 seconds to establish a serial console connection to the instance using SSH. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-serial-console.html">EC2 Serial Console</a> in the <i>Amazon EC2 User Guide</i>.</p>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct SendSerialConsoleSSHPublicKey {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::send_serial_console_ssh_public_key_input::Builder,
}
impl SendSerialConsoleSSHPublicKey {
/// Creates a new `SendSerialConsoleSSHPublicKey`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::SendSerialConsoleSshPublicKeyOutput,
aws_smithy_http::result::SdkError<crate::error::SendSerialConsoleSSHPublicKeyError>,
> {
let op = self
.inner
.build()
.map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
.make_operation(&self.handle.conf)
.await
.map_err(|err| {
aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
})?;
self.handle.client.call(op).await
}
/// <p>The ID of the EC2 instance.</p>
pub fn instance_id(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.instance_id(input.into());
self
}
/// <p>The ID of the EC2 instance.</p>
pub fn set_instance_id(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_instance_id(input);
self
}
/// <p>The serial port of the EC2 instance. Currently only port 0 is supported.</p>
/// <p>Default: 0</p>
pub fn serial_port(mut self, input: i32) -> Self {
self.inner = self.inner.serial_port(input);
self
}
/// <p>The serial port of the EC2 instance. Currently only port 0 is supported.</p>
/// <p>Default: 0</p>
pub fn set_serial_port(mut self, input: std::option::Option<i32>) -> Self {
self.inner = self.inner.set_serial_port(input);
self
}
/// <p>The public key material. To use the public key, you must have the matching private key. For information about the supported key formats and lengths, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html#how-to-generate-your-own-key-and-import-it-to-aws">Requirements for key pairs</a> in the <i>Amazon EC2 User Guide</i>.</p>
pub fn ssh_public_key(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.ssh_public_key(input.into());
self
}
/// <p>The public key material. To use the public key, you must have the matching private key. For information about the supported key formats and lengths, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html#how-to-generate-your-own-key-and-import-it-to-aws">Requirements for key pairs</a> in the <i>Amazon EC2 User Guide</i>.</p>
pub fn set_ssh_public_key(
mut self,
input: std::option::Option<std::string::String>,
) -> Self {
self.inner = self.inner.set_ssh_public_key(input);
self
}
}
/// Fluent builder constructing a request to `SendSSHPublicKey`.
///
/// <p>Pushes an SSH public key to the specified EC2 instance for use by the specified user. The key remains for 60 seconds. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Connect-using-EC2-Instance-Connect.html">Connect to your Linux instance using EC2 Instance Connect</a> in the <i>Amazon EC2 User Guide</i>.</p>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct SendSSHPublicKey {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::send_ssh_public_key_input::Builder,
}
impl SendSSHPublicKey {
/// Creates a new `SendSSHPublicKey`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::SendSshPublicKeyOutput,
aws_smithy_http::result::SdkError<crate::error::SendSSHPublicKeyError>,
> {
let op = self
.inner
.build()
.map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
.make_operation(&self.handle.conf)
.await
.map_err(|err| {
aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
})?;
self.handle.client.call(op).await
}
/// <p>The ID of the EC2 instance.</p>
pub fn instance_id(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.instance_id(input.into());
self
}
/// <p>The ID of the EC2 instance.</p>
pub fn set_instance_id(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_instance_id(input);
self
}
/// <p>The OS user on the EC2 instance for whom the key can be used to authenticate.</p>
pub fn instance_os_user(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.instance_os_user(input.into());
self
}
/// <p>The OS user on the EC2 instance for whom the key can be used to authenticate.</p>
pub fn set_instance_os_user(
mut self,
input: std::option::Option<std::string::String>,
) -> Self {
self.inner = self.inner.set_instance_os_user(input);
self
}
/// <p>The public key material. To use the public key, you must have the matching private key.</p>
pub fn ssh_public_key(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.ssh_public_key(input.into());
self
}
/// <p>The public key material. To use the public key, you must have the matching private key.</p>
pub fn set_ssh_public_key(
mut self,
input: std::option::Option<std::string::String>,
) -> Self {
self.inner = self.inner.set_ssh_public_key(input);
self
}
/// <p>The Availability Zone in which the EC2 instance was launched.</p>
pub fn availability_zone(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.availability_zone(input.into());
self
}
/// <p>The Availability Zone in which the EC2 instance was launched.</p>
pub fn set_availability_zone(
mut self,
input: std::option::Option<std::string::String>,
) -> Self {
self.inner = self.inner.set_availability_zone(input);
self
}
}
}
impl Client {
/// Creates a client with the given service config and connector override.
pub fn from_conf_conn<C, E>(conf: crate::Config, conn: C) -> Self
where
C: aws_smithy_client::bounds::SmithyConnector<Error = E> + Send + 'static,
E: Into<aws_smithy_http::result::ConnectorError>,
{
let retry_config = conf.retry_config.as_ref().cloned().unwrap_or_default();
let timeout_config = conf.timeout_config.as_ref().cloned().unwrap_or_default();
let sleep_impl = conf.sleep_impl.clone();
let mut builder = aws_smithy_client::Builder::new()
.connector(aws_smithy_client::erase::DynConnector::new(conn))
.middleware(aws_smithy_client::erase::DynMiddleware::new(
crate::middleware::DefaultMiddleware::new(),
));
builder.set_retry_config(retry_config.into());
builder.set_timeout_config(timeout_config);
if let Some(sleep_impl) = sleep_impl {
builder.set_sleep_impl(Some(sleep_impl));
}
let client = builder.build();
Self {
handle: std::sync::Arc::new(Handle { client, conf }),
}
}
/// Creates a new client from a shared config.
#[cfg(any(feature = "rustls", feature = "native-tls"))]
pub fn new(sdk_config: &aws_types::sdk_config::SdkConfig) -> Self {
Self::from_conf(sdk_config.into())
}
/// Creates a new client from the service [`Config`](crate::Config).
#[cfg(any(feature = "rustls", feature = "native-tls"))]
pub fn from_conf(conf: crate::Config) -> Self {
let retry_config = conf.retry_config.as_ref().cloned().unwrap_or_default();
let timeout_config = conf.timeout_config.as_ref().cloned().unwrap_or_default();
let sleep_impl = conf.sleep_impl.clone();
let mut builder = aws_smithy_client::Builder::dyn_https().middleware(
aws_smithy_client::erase::DynMiddleware::new(
crate::middleware::DefaultMiddleware::new(),
),
);
builder.set_retry_config(retry_config.into());
builder.set_timeout_config(timeout_config);
// the builder maintains a try-state. To avoid suppressing the warning when sleep is unset,
// only set it if we actually have a sleep impl.
if let Some(sleep_impl) = sleep_impl {
builder.set_sleep_impl(Some(sleep_impl));
}
let client = builder.build();
Self {
handle: std::sync::Arc::new(Handle { client, conf }),
}
}
}